Problem With USB Connection On A Nike100 - Touch Dual, MDA Touch Plus General

Hello! I have a Nike 100. I had recently changed the original rom with a new one. I didnt have any problems till recently it stopped working on usb mode. Even if i try to put it in bootloader it still isnt recognized.. even though its charging normaly... I thought the problem was in the cooked rom for some reason and i tryed following the info on the forum to install a new one using the microsd and but it doesnt find it.. althougth when u look with file explorer on the cooked rom it finds it correctly.. i sync it with bluetooth since it doesnt work in another way.. Any Ideas are welcome! Thanx in advance..

Related

i think my phone is dieing

Hello all,
I'm not sure but i think my blackstone is on its last legs.
It all started after i flashed to Dutty's last rom the r15 one. Did the usual uspl and eveything went to plan. Then about a week ago the phone frooze, i could'nt get it to reset so had to take the battery out (no biggy). Then tried turning it back on, and it just frooze again right at the windows start-up screen. So did a hard reset and the phone seemed very slow and jumpy.
Then i thought maybe the download of dutty's rom wasn't the best. So today i had planned to install a different rom and see if it was just a bad download or sumthing. And heres the big problem, i can't get the bootloader to connect to my pc.
And what seems strange is that when i enter the bootloader it flashes up with the re/green/blue/white screen andt ehn it shows a grey screen with "loading......." for about 10 seconds then comes back the normal bootloading screen. As usual serial pops up at the bottom, but when connected to my pc it won't show USB!!
I have win7 64, but i have set it up so i can flash using USPL as thats how i got dutty's R15 rom on there.
Any help would be great and hopfully i can get this sorted swn as i love my hd.
p.s
i've spent the past 2 hours searching here and havent found anyone with the same problem.
Thanks
Antony
if you could update from the sd card that would solve some of your problems.but i realy do not know if it is working if you do not have HSPL.
maybe you can find some info on the forums about updating via sd card without HSPL.
or you could try to connect to a computer with other operating system than windows 7.
i am now installing the stock rom.
hopefully then i wil be able to install a cooked rom again.
berbecverde said:
if you could update from the sd card that would solve some of your problems.but i realy do not know if it is working if you do not have HSPL.
maybe you can find some info on the forums about updating via sd card without HSPL.
or you could try to connect to a computer with other operating system than windows 7.
Click to expand...
Click to collapse
Thanks for the help,
I will see what the outcome is from the stock rom. And if i can't get it working again with win7 then i'll have to set up my mini pc (made a pc inside an old nintendo SNES) as thats got xp running
thanks once again
just for my curiosity what method are you using to flash a stock rom if you cannot connect to computer through usb?
berbecverde said:
just for my curiosity what method are you using to flash a stock rom if you cannot connect to computer through usb?
Click to expand...
Click to collapse
Well after more hours spent reading thro web page after web page, i stumbled over someone saying that it could be down to the usb cable and i have a few mini usb one, so tried them all, finally got the bootloader to show the usb.
I was then going to install a cooked rom, but thought i'd be the best to go for stock first.
All is working ok now. I'm not sure if it was down to the usb cable totally tho as it was a bit strange the whole grey loading screen on the bootloader which has gone now with the stock rom.
ah well looks like its fixed for now.

[Q] HD2 and ActiveSync.

Hi all.
I just a got a HD2 today. And the first thing that came in my mind was "Let's go to xdaDev to get a nice custom rom". I downloaded one.
After that I put the usb and try to make it syncronize. And the problem is here : ActiveSync dont reconize the phone. I spent the last 4 hours to google why it shall not work. I tried to unstick option at "Start=>Settings=> Usb to PC" but it dont work. Nothing more after perfoming a hard reset and reinstall ActivSync.
But something is strange : When I go in the bootloader, there is the 3 color screen and the phone Display "Serial" at the bottom of the screen ; and when I start it again with USB plugged, it doesnt display "USB" instead of "Serial" it's just void and if I remove the USB "Serial" is displayed.
Plz help me to make the phone syncronize .
I use Windows XP (no firewall, no antivirus) and an official Orange Rom. My SPL is 1.42.0000. I just hope there is no hardware problem ...
Some news ...
The HD2 isnt detected on 2 other PC (Both Win XP). I managed to syncronize my old Diamond too, and it worked well. Same with a HTC Touch and a Touch Cruise, the 3 ones works.
I also tried to use Bluetooth to get an Activesync connection and this time, it noticed the HD2 but no way to get a synchronization.
Any ideas ?
Try this: goto Settings, Other (Miscellaneous settings), USB to PC, Enable faster data data synchronization. Try to tick and untick the last setting.
It doesnt work . I'm trying to follow a "GoldCard" tutorial to flash to an official HTC rom. Maybe it's Orange operator rom ... But if you have any other suggestion, let me know
I can't believe that it's such a s*** to just connect the last HTC phone to a computer. The tutorial need ActiveSync to get the SD card ID so I will not succes in this way.
Is there another software that can be used instead of ActiveSync ?
Did you flash any rom at all or are you still stock?
If you have flashed already, Have you tried to go back to the default shipped rom using sd card (not goldcard)?
Find the rom that shipped with your device, extract the RUU_Signed.nbh file from it, copy it to your fat32 formatted sd card, rename leoimg.nbh, put card in phone, boot phone with down volume held, hopefully you get the message on the three colour screen saying something like 'press volume up to start' or somesuch.
THis should not only flash the rom, but also fix spl if it has become corruptted(which appart from hardware errors is the only reason i can see that it wouldn't recognise a USB connection)
Make sure it is the correct rom for your phone, though, correct vendor and region id.
I must say if you havent flashed yet it sounds like a hardware fault with teh usb cable/connector
I'm currently running a stock Rom from a french operator nammed "Orange". I haven't flashed anything since ActiveSync just dont want to know anything about my HD2.
Maybe I shall send it back to the seller. That's so frustating ...
If i dont find a way to solve this problem until the end of the day, I will return the phone.
Anyway thx for trying to help me
To me either the cable or the phone is faulty. Try another cable if you have one, if not just have the phone exchanged.
Phoque_You said:
I'm currently running a stock Rom from a french operator nammed "Orange". I haven't flashed anything since ActiveSync just dont want to know anything about my HD2.
Maybe I shall send it back to the seller. That's so frustating ...
If i dont find a way to solve this problem until the end of the day, I will return the phone.
Anyway thx for trying to help me
Click to expand...
Click to collapse
Ah in that case then i'd seriously consider taking it back /sending it back. Especially if you have tried more than one computer, sounds to me like faulty cable or USB socket.
kilrah said:
To me either the cable or the phone is faulty. Try another cable if you have one, if not just have the phone exchanged.
Click to expand...
Click to collapse
You must be right. I tried everything and I never had so much pain with my others HTC to get syncronization
I had the same problem not beeing able to connect to the internet via computer. After playing with the activesync settings on the Computer -> conection settings-> ticking on and off some of the boxes->ok, it worked again.
I have connected to three of these phones ( 2 french 1 english) and no problem whatsoever, everything happens without needing to touch any of the settings...is your pc even recognising that something is being plugged in on the USB?
Have you installed the latest version of activesync?
If you have done all the obvious things and it still does not work, the phone or the cable is defective...It should connect straight out of the box with a standard, un changed version of activesync.
Send it back!

HElp Please - Usb Connection issues Phone & Win 7

My Phone does not see USB connection for Activesync but is does see it to charge. Also my PC doesn't see my Phone via the USB
What do I need to do to establish a active sync USB connection
It will connect via blue tooth - but I need the connection back.
Can anyone Help please
P.S. I have used serveral Roms on my device.
try to put ure phone in restore or boot screen mode then try to plug it in , coz it happened to me as well , as i m typing now....
That doesn't work.
I have installed a couple of roms since this issue became an issue but i installed them via the microsD.
Any Other Ideas?
check usb settings
Are you able to connect usb, and see the contents of mirco sd card
sometimes the "usb to pc" setup may be set to disk content instead of activesync
check : settings/system/usb to pc
Ive had this problem a little over a month now, couldnt find a solution neither. For me an error comes up saying "device not recognised" (i opened up the device, checked for any hardware f ups, couldnt find any.. Although it cant be software either coz if flashed so many times after it with the same problem.. Really weird. If you find a solution, id love to know it to.
Regards
Is there way we can raise this so more people can see this issue.
I have install roms before the issue and since it happened I have done via the MicrosSD.
There must be a way of sorting this
Will a task 29 help?
Dark Ninja said:
Ive had this problem a little over a month now, couldnt find a solution neither. For me an error comes up saying "device not recognised" (i opened up the device, checked for any hardware f ups, couldnt find any.. Although it cant be software either coz if flashed so many times after it with the same problem.. Really weird. If you find a solution, id love to know it to.
Regards
Click to expand...
Click to collapse
you could try a task 29 or install a original rom to see if the problem go away
skodann said:
you could try a task 29 or install a original rom to see if the problem go away
Click to expand...
Click to collapse
Sorry I cannot connect to my PC in any way other than bluetooth or MicrosSD so I cannot use Task 29.
I'll try a stock rom.
Does anyone know where to find the latest stock ROM from orange UK
Thanks for the Advice skodann
MOD EDIT - Moved to General discussion as not related to rom development
Task 29 cannot be done because of the USB port not funtioning.. and flashinga stock rom didnt work, maybe it needs to be done by USB?
BTW, should say this before, once you flash stock, you cant go back to HSPL as HSPL can not be flashed without USB..

hi can anyone help me please :(.

Hi everyone i was wondering if anyone could help me... i have several questions about my htc touch elf see i just upgraded it to the onyx 4.something version and after 4 days the wifi stoped working it wont turn on and it wont detect my sd card either... i was wondering if anyone could help me on how to degrade it to a better ROM or anything cause when i try to degrade the onyx 4.something to 3.0 it says it cant establish a conection between the phone and the computer when i run the romupgradeutlity and when i hit the upgradeimage buttom... ... please help me.. thanks a lot!
post in Onyx ROM thread and read the stickies.
Your Elf Device, Our Vogue Device
Sorry, your device is simply different internally.
http://forum.xda-developers.com/showthread.php?t=713265
rasv19 said:
Hello I was wondering if anyone could help me... i have an htc touch elf and i upgraded it to the Onyx 4.0 after 4 days of use it started giving me some trouble sometimes i hitted the touch screen and it opened something else , my wifi stoped working it wont turn on and it wont detect my micro SD... i tried downgrading to Onyx 3.0 through ROMupdateutility but when it was at 0% it said it coudlnt detect the mobile device... i was wondering if anyone could help me fix this problem cause i want my phones wifi to work and micro sd too. thanks a lot.
Click to expand...
Click to collapse
please try a hard reset, that should help solve the problems.
i doubt if this is anything to do with ROM you flashed (since you have flashed successfully, as your phone does boot.
if none of this works please post.
a hard reset should help you though.
rasv19 said:
nope it didnt worked my phones wifi still not working and its not detecting my sd card.... like wheneve ri turn blutooth on the wifi green light turns on with it but the wifi wont turn on itself and then when i go to the music thing on my phone it detects the first song i have but when i play it says theres no files and the sd card wont show up on the file explorer.... and other thing when i try upgrading or downgrading my phone by romupgrade utility i get the error 222 canot eswtablish conections between your pda and computer check usb cable.... so i dont know cause the first time i upgraded it from the manufacture ROM to the onyx 4.somethhing it went pretty great..
Click to expand...
Click to collapse
i see, error222.
please make sure that your USB cable is working.
pleasemake sure your computer has active sync 4.5 installed ( if windows XP)
or the latest WMDC (if vista or win7 )
also regarding the memory card, are u sure the card is fine ?
please put it another device/card reader and check, try formatting it and see if ur elf detects it.
ROMs usually don't have anything to do with memory drivers.
what HSPL/USPL did u flash ?
Prowess said:
Sorry, your device is simply different internally.
http://forum.xda-developers.com/showthread.php?t=713265
Click to expand...
Click to collapse
You posted in the Vogue section. I have transferred your thread to the Elf section.
yeah it works on other devices.... the usb cable is working really fine and i dont know what uspl i flashed .. . like i mean everything went rite until 4 days after i instaled the onyx 4.0 ultimate everything was working fine with it but 4 days later it started to give me that problem ... and i try to change ROM but i cant it wont let me i run active sync andeveyrthing it says its conected i run the romupdateutiliy then the status bar opens up but it stays at 0% and then the error 222 shows up... but my phone goes to the bootloader but it wont pass from there.. and when i close the romupdateutility my phone switches to the status bar but stays in 0% and then my phone crashes and i have to unbrick it.
first of all please do not open 3 different threads for the same problem, i have removed the other two.
also as aman said try posting in the the rom thread.
please read thee thread which have been stickied on the ROM development thread.
please be patient
thanks for your co-orperation.

Help... Unable to Flash any Rom...

hey guys i need help i recently flashed to cloudyfa 2.3 rom and im having problems with it. so i decided to switch over... but in unable to do so because whenever i connect my device in SPL mode to flash rom... i hear the attachment of usb sound but the serial on bottom of screen doesnt change to USB and so forth i cannot flash any rom....
i have HSPL 1.56 .....
hispeedworm said:
hey guys i need help i recently flashed to cloudyfa 2.3 rom and im having problems with it. so i decided to switch over... but in unable to do so because whenever i connect my device in SPL mode to flash rom... i hear the attachment of usb sound but the serial on bottom of screen doesnt change to USB and so forth i cannot flash any rom....
i have HSPL 1.56 .....
Click to expand...
Click to collapse
hmmmm maybe a strange thing but could you try a usb port that is directly connected to youre mobo like one of them on the back of youre computer and if that doesnt help try a differnet cable on that port
miniterror said:
hmmmm maybe a strange thing but could you try a usb port that is directly connected to youre mobo like one of them on the back of youre computer and if that doesnt help try a differnet cable on that port
Click to expand...
Click to collapse
hey chris... glad to see you here... but unfortunately i tried both... different ports and different cables.... the problem still remains... and the worse part is that the current rom im using its not working on my cell at all... cell freezes more than randomly and doesnt even restart. i have to take the battery out wait 10 secs than reinsert to start it again and it keeps messing up my clock time to plus 1 hour even though daylight saving is turned off in this rom
EDIT: Fixed the problem...somehow my htc driver on windows 7 had gotten corrupt... deleted it and reinstalled the drivers and its working fine now... thanks alot for the help CHRIS

Categories

Resources