Database Users

Htc Touch elf usb issues

Hey, I was looking to flash my rom to a better one however when i connect my htc touch to my pc the light turns on on my phone but the computer does not pick it up, doesnt even make a noise or show up in my computer. Have tried soft reseting, hard reseting, reinstalling windows device manager and tried to use on another computer but again the computer does not pick it up. Cable looks to be in fine condition, could this be a fault with the phones software? Any help would be great thanks.

if u r using mikys rom then i have same probs.but switching to oynx solve it.do this

no, its the default rom, the one the phone came with. it just wont connect, is there a way to upgrade or flash my rom to a better one without connecting to my computer? how do i upgrade or flash my phone

Hi
It happened to me a few times, changing the cable solved it
Good luck

i will recommend u to upgrade to onyx 6.5 release 2 and just try to check with another cable toooooo

Help
jbrown17109 said:
is there a way to upgrade or flash my rom to a better one without connecting to my computer? how do i upgrade or flash my phone
Click to expand...
Click to collapse
I want to know too. My miniUSB port is broken.

Try sdcard flashing http://forum.xda-developers.com/wiki/index.php?title=Elf_SD_Card_Flashing

i think my phone is dieing

Hello all,
I'm not sure but i think my blackstone is on its last legs.
It all started after i flashed to Dutty's last rom the r15 one. Did the usual uspl and eveything went to plan. Then about a week ago the phone frooze, i could'nt get it to reset so had to take the battery out (no biggy). Then tried turning it back on, and it just frooze again right at the windows start-up screen. So did a hard reset and the phone seemed very slow and jumpy.
Then i thought maybe the download of dutty's rom wasn't the best. So today i had planned to install a different rom and see if it was just a bad download or sumthing. And heres the big problem, i can't get the bootloader to connect to my pc.
And what seems strange is that when i enter the bootloader it flashes up with the re/green/blue/white screen andt ehn it shows a grey screen with "loading......." for about 10 seconds then comes back the normal bootloading screen. As usual serial pops up at the bottom, but when connected to my pc it won't show USB!!
I have win7 64, but i have set it up so i can flash using USPL as thats how i got dutty's R15 rom on there.
Any help would be great and hopfully i can get this sorted swn as i love my hd.
p.s
i've spent the past 2 hours searching here and havent found anyone with the same problem.
Thanks
Antony

if you could update from the sd card that would solve some of your problems.but i realy do not know if it is working if you do not have HSPL.
maybe you can find some info on the forums about updating via sd card without HSPL.
or you could try to connect to a computer with other operating system than windows 7.

i am now installing the stock rom.
hopefully then i wil be able to install a cooked rom again.

berbecverde said:
if you could update from the sd card that would solve some of your problems.but i realy do not know if it is working if you do not have HSPL.
maybe you can find some info on the forums about updating via sd card without HSPL.
or you could try to connect to a computer with other operating system than windows 7.
Click to expand...
Click to collapse
Thanks for the help,
I will see what the outcome is from the stock rom. And if i can't get it working again with win7 then i'll have to set up my mini pc (made a pc inside an old nintendo SNES) as thats got xp running
thanks once again

just for my curiosity what method are you using to flash a stock rom if you cannot connect to computer through usb?

berbecverde said:
just for my curiosity what method are you using to flash a stock rom if you cannot connect to computer through usb?
Click to expand...
Click to collapse
Well after more hours spent reading thro web page after web page, i stumbled over someone saying that it could be down to the usb cable and i have a few mini usb one, so tried them all, finally got the bootloader to show the usb.
I was then going to install a cooked rom, but thought i'd be the best to go for stock first.
All is working ok now. I'm not sure if it was down to the usb cable totally tho as it was a bit strange the whole grey loading screen on the bootloader which has gone now with the stock rom.
ah well looks like its fixed for now.

[Q] hd2 1024 stuck on boot screen !!!!!!!! HELP ME!!!

hi i know alot of people are having problems with thier phone being stuck on the boot screen after they just flashed a rom well i have a different problem, my problem is i flashed a nrg rom the mikes hard sense rom i think thats wat it is called not sure but it flashed fine and the phone worked perfectly but two weeks later it now is stuck on the boot screen all of the sudden i went to the boot loader screen and connected to my usb but it does not show that i am activesync any help on how to fix this or maybe im doing it wrong please help

U weird... not even on the tri color screen is detected? Look at the tri color screen if it displays USB and not serial, ur good to go for flasing, Tried another port? Cable? Wich os are u using on the PC xp, vista or seven? Does the radio, protocol and build numbers appear? Wich radio are u using? Tried flashing from SD? CAREFUL with this though if u flash via sd a stock rom it will overwrite the hspl
Sent from my HTC bravo using XDA App

rollarobot said:
hi i know alot of people are having problems with thier phone being stuck on the boot screen after they just flashed a rom well i have a different problem, my problem is i flashed a nrg rom the mikes hard sense rom i think thats wat it is called not sure but it flashed fine and the phone worked perfectly but two weeks later it now is stuck on the boot screen all of the sudden i went to the boot loader screen and connected to my usb but it does not show that i am activesync any help on how to fix this or maybe im doing it wrong please help
Click to expand...
Click to collapse
Re-install drivers...

Disable activesync usb connections, task29

[Q] Flash back from WP7 to WinMo 6.5.*

Hi there. I flashed my hd2 (T-MOBILE) to WP7.
Now i need flash back to winmo 6.5.*
i try looking for some thread at forum but no luck (new forum look )
can someone tell me (link) how to flash back to 6.5.* and what ROM is the best for my radio version
T-MOBILE US
T-Mobile LEORadio_2_10_50_08_2

GeneralWoo said:
Hi there. I flashed my hd2 (T-MOBILE) to WP7.
Now i need flash back to winmo 6.5.*
i try looking for some thread at forum but no luck (new forum look )
can someone tell me (link) how to flash back to 6.5.* and what ROM is the best for my radio version
T-MOBILE US
T-Mobile LEORadio_2_10_50_08_2
Click to expand...
Click to collapse
I have the same problem, I have radio 2.10.50.26 but Im having some issues with WP7 restarting itself and no data connection, so I want to flash the 2.15 radio. I think I need be running WinMo to do this, but I have no idea how to flash back to a winmo rom from WP7. Help?

Simple,
Get to the tri color boot screen (vol down + power button)
Flash your win 6.5 ROM.

Hi, I am also trying to flash back to 6.5 from WM7. Could someone please give me some more details about how to flash back? I have the 6.5 rom on my PC and can get to the boot screen no problem but if I then try and install the old rom it fails as the PC doesn't detect the phone as being connected. Any help would be much appreciated, as although I love WM7 on my HD2 when it is working, it has a habit of randomly rebooting a lot! Thanks!

Hewarmsjeans said:
Hi, I am also trying to flash back to 6.5 from WM7. Could someone please give me some more details about how to flash back? I have the 6.5 rom on my PC and can get to the boot screen no problem but if I then try and install the old rom it fails as the PC doesn't detect the phone as being connected. Any help would be much appreciated, as although I love WM7 on my HD2 when it is working, it has a habit of randomly rebooting a lot! Thanks!
Click to expand...
Click to collapse
Just keep your phone unplugged and put it in bootloader mode. After a few seconds, the bottom part of the screen should say serial. Once it says that, plug it into your computer. Serial should change to USB in a second. If your computer doesnt have a driver for it yet, it should install that. Once its done, and once your phone says USB on the bottom of the bootloader screen, you should just be able to run the rom installer on your computer and install it. Good luck!

Thanks for you help, I managed that fine, though I had also wanted to remove the Hardspl I had used to add WM7. I have tried flashing the stock ROM back (via SD card and via USB) to overwrite it, however it fails to install correctly and the phone is being very unstable. Any suggestions!?

According to the thread I used to flash HSPL to my phone, you just make sure youre running a stock rom, then run the HSPL program like you did when you first put on HSPL, but choose 2.08.0000 in the selection screen.
That said, I havent removed HSPL so Im not entirely sure what to do if that doesnt work. If thats what you tried, Im not sure what to tell you

Have tried fiddling again and think I have done it! In the boot screen it now says SPL-2.08 (hopefully this is stock!?) and the phone seems to be behaving! Cheers for your assisstance

Yup, thats stock. No problem

peace warhead said:
I have the same problem, I have radio 2.10.50.26 but Im having some issues with WP7 restarting itself and no data connection, so I want to flash the 2.15 radio. I think I need be running WinMo to do this, but I have no idea how to flash back to a winmo rom from WP7. Help?
Click to expand...
Click to collapse
You can changes Radio Roms as you wish under any OS. Just hold the Vol Down key when switching on to enter bootloader and flash via USB from there.

SMS92 said:
You can changes Radio Roms as you wish under any OS. Just hold the Vol Down key when switching on to enter bootloader and flash via USB from there.
Click to expand...
Click to collapse
Yeah, I figured that out after I flashed back to WinMo -_____- haha
Now I just need to figure out how to make Chevron communicate with my phone so I can activate WP7

peace warhead said:
Yeah, I figured that out after I flashed back to WinMo -_____- haha
Now I just need to figure out how to make Chevron communicate with my phone so I can activate WP7
Click to expand...
Click to collapse
i suggest u use windows 7 (PC) and connect to internet when you are plugging phone to pc ,so it will download the usb driver and all of your problems will disapear

imanh said:
i suggest u use windows 7 (PC) and connect to internet when you are plugging phone to pc ,so it will download the usb driver and all of your problems will disapear
Click to expand...
Click to collapse
Hmmm I actually havent tried that yet, Ive done pretty much everything aside from reinstalling windows and stuff. I shut off my wireless during the process though because I turned off my antivirus and firewall. Hopefully that will work. WP7 is nice even without being activated, but it certainly doesnt come with many apps.

ROM code error and unrecognised USB connection...urgent help!

Guys,
im in extremely deep **** now.I accidentally tried flashing a stock ROM via SD card and now ive gt a ROM code error and 00028002 'Not Allow" error.What makes this worse is that my Vista computer is not recognizing any USB connection when i connect my HD2 to the computer.If i need to flash a stock rom via RUU wrapper to get through this stupid ROM code error, i need a USB connection on the first place...which IS NOT WORKING NOW!!!...im using a 512MBLeo,which is now stuck at SPL-1.42(previously HSPL)...im sitting duck here guys...i really really need your help on this one.i cant boot normally into 6.5,i cant flash a new ROM,i cant use bootloader and flash a LEOIMG using SD card cus it returns the above errors and i cant use my PHONE!!!...im extremely frustrated and helpless.please help guys...thanks alot...

If I understand you can still get to bootloader correct?
Exactly what official ROM did you try to flash?
Where did you get the ROM from?
Just so you know you can still flash HSPL with the 1.42.0000 SPL you have.
ROM code error usually means that official ROM is not for that HD2.

I flashed '1.48.405.2' which i downloaded from the net(http://theunlockr.com/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/)...I tried flashing LEOIMG(SD card method) from Elegancia GTX v5.0 ROM,but thats returning the same error plus...it gets stuck on the white 'loading screen'.I know i can flash HSPL or any other stock rom with my current SPL,but my USB connection is not working...thats exactly the problem now...any idea where to get the actual stock ROM for my HD2?...Maybe that might prevail...Thanks.

kawshigan said:
I flashed '1.48.405.2' which i downloaded from the net...I tried flashing LEOIMG(SD card method) from Elegancia GTX v5.0 ROM,but thats returning the same error.I know i can flash HSPL or any other stock rom with my current SPL,but my USB connection is not working...thats exactly the problem now...any idea where to get the actual stock ROM for my HD2?...Maybe that might prevail...Thanks.
Click to expand...
Click to collapse
Yes go to htc.com amd enter the serial number of your HD2 (can be found under the battery) and it will only let you download the ROMs that are for your HD2. Also make sure the HTC site you go to is for your part of the world, It has links on the site to go to HTC sites for other countries.
As for your no USB go to your device manager in control panel and find your HD2 ther while it is connected via USB it will be listed as unknown, mobile device, or something like that but it will be there. Just click on it once to get it to drop down to the actual device and then right click it and select update drivers and then select from internet. If this does not work download the latest version of Windows Mobile Device Center (WMDC) and install it to your computer and this should give you the drivers you need.

Alright ill try all that and get back to you.Thanks alot for your advice!

Error Resolved
First,i would like to say thanks to you, T-Macgnolia.The ROM downloaded from the HTC website, which i flashed via sd card worked like a dream...However, the same cant be said for my USB connection though(I tried everything you said).My computer still keeps dropping USB connections intermittently...i miraculously managed to flash HSPL 3 on my HD2 just before the USB connection dropped.I was running WM 6.5 and android previously and i want to dual boot wp7 and android...which needs a USB connection(for MAGLDR and WP7)...Charging works fine via AC charger and via USB port(its just USB connection itself...any ideas where the fault lies?).i personally think the problem lies with my USB cable(as other devices work fine with the USB ports in my laptop). Guess i just have to buy a new micro usb cable(...thanks for your advice again.

kawshigan said:
First,i would like to say thanks to you, T-Macgnolia.The ROM downloaded from the HTC website, which i flashed via sd card worked like a dream...However, the same cant be said for my USB connection though(I tried everything you said).My computer still keeps dropping USB connections intermittently...i miraculously managed to flash HSPL 3 on my HD2 just before the USB connection dropped.I was running WM 6.5 and android previously and i want to dual boot wp7 and android...which needs a USB connection(for MAGLDR and WP7)...Charging works fine via AC charger and via USB port(its just USB connection itself...any ideas where the fault lies?).i personally think the problem lies with my USB cable(as other devices work fine with the USB ports in my laptop). Guess i just have to buy a new micro usb cable(...thanks for your advice again.
Click to expand...
Click to collapse
Yeah buy a new cable and see if that helps. If the problem pursists then you probably have a problem with the pins in your micro USB port of your HD2 that are randomly loosing connection to the main board because the solder points for the USB port is become cracked, loose, or just seperating for some reason. You might can find a cell phone repair shop that can resolder the connections for you are just Chang the intierior main board out for you ifcthis is the problem.