Related
Hi all.
I just a got a HD2 today. And the first thing that came in my mind was "Let's go to xdaDev to get a nice custom rom". I downloaded one.
After that I put the usb and try to make it syncronize. And the problem is here : ActiveSync dont reconize the phone. I spent the last 4 hours to google why it shall not work. I tried to unstick option at "Start=>Settings=> Usb to PC" but it dont work. Nothing more after perfoming a hard reset and reinstall ActivSync.
But something is strange : When I go in the bootloader, there is the 3 color screen and the phone Display "Serial" at the bottom of the screen ; and when I start it again with USB plugged, it doesnt display "USB" instead of "Serial" it's just void and if I remove the USB "Serial" is displayed.
Plz help me to make the phone syncronize .
I use Windows XP (no firewall, no antivirus) and an official Orange Rom. My SPL is 1.42.0000. I just hope there is no hardware problem ...
Some news ...
The HD2 isnt detected on 2 other PC (Both Win XP). I managed to syncronize my old Diamond too, and it worked well. Same with a HTC Touch and a Touch Cruise, the 3 ones works.
I also tried to use Bluetooth to get an Activesync connection and this time, it noticed the HD2 but no way to get a synchronization.
Any ideas ?
Try this: goto Settings, Other (Miscellaneous settings), USB to PC, Enable faster data data synchronization. Try to tick and untick the last setting.
It doesnt work . I'm trying to follow a "GoldCard" tutorial to flash to an official HTC rom. Maybe it's Orange operator rom ... But if you have any other suggestion, let me know
I can't believe that it's such a s*** to just connect the last HTC phone to a computer. The tutorial need ActiveSync to get the SD card ID so I will not succes in this way.
Is there another software that can be used instead of ActiveSync ?
Did you flash any rom at all or are you still stock?
If you have flashed already, Have you tried to go back to the default shipped rom using sd card (not goldcard)?
Find the rom that shipped with your device, extract the RUU_Signed.nbh file from it, copy it to your fat32 formatted sd card, rename leoimg.nbh, put card in phone, boot phone with down volume held, hopefully you get the message on the three colour screen saying something like 'press volume up to start' or somesuch.
THis should not only flash the rom, but also fix spl if it has become corruptted(which appart from hardware errors is the only reason i can see that it wouldn't recognise a USB connection)
Make sure it is the correct rom for your phone, though, correct vendor and region id.
I must say if you havent flashed yet it sounds like a hardware fault with teh usb cable/connector
I'm currently running a stock Rom from a french operator nammed "Orange". I haven't flashed anything since ActiveSync just dont want to know anything about my HD2.
Maybe I shall send it back to the seller. That's so frustating ...
If i dont find a way to solve this problem until the end of the day, I will return the phone.
Anyway thx for trying to help me
To me either the cable or the phone is faulty. Try another cable if you have one, if not just have the phone exchanged.
Phoque_You said:
I'm currently running a stock Rom from a french operator nammed "Orange". I haven't flashed anything since ActiveSync just dont want to know anything about my HD2.
Maybe I shall send it back to the seller. That's so frustating ...
If i dont find a way to solve this problem until the end of the day, I will return the phone.
Anyway thx for trying to help me
Click to expand...
Click to collapse
Ah in that case then i'd seriously consider taking it back /sending it back. Especially if you have tried more than one computer, sounds to me like faulty cable or USB socket.
kilrah said:
To me either the cable or the phone is faulty. Try another cable if you have one, if not just have the phone exchanged.
Click to expand...
Click to collapse
You must be right. I tried everything and I never had so much pain with my others HTC to get syncronization
I had the same problem not beeing able to connect to the internet via computer. After playing with the activesync settings on the Computer -> conection settings-> ticking on and off some of the boxes->ok, it worked again.
I have connected to three of these phones ( 2 french 1 english) and no problem whatsoever, everything happens without needing to touch any of the settings...is your pc even recognising that something is being plugged in on the USB?
Have you installed the latest version of activesync?
If you have done all the obvious things and it still does not work, the phone or the cable is defective...It should connect straight out of the box with a standard, un changed version of activesync.
Send it back!
Hey, small problem here. I was charging my HD2 earlier today with no problems at all, I flashed the 1.72 stock ROM back onto my phone, and it seemed to be charging fine for a small while after that. But now, after I tried charging my phone, it doesn't seem to recognise there's a USB connection at all. The LED at the speaker-grille isn't doing anything, and the the phone tells me it isn't connected by USB when it's plugged into a computer.
I tried a tonne of things, checked the cable and switched it, soft-reset it, took the battery out, hard reset it, and even blown inside the socket to try and get rid of anything that might be blocking it, but it just isn't showing it's plugged in AT ALL any more... and now the battery is dead, so I can't do anything with it now to try and help it. :/
The only sign I have that the phone realises it has any sort of USB connection, is when I tried to hard reset the device, (I used the hold volUp+volDown+Power method) and it shows the message 'press volUp to hard reset,' usually when I do this, pressing volume up doesn't do anything when the phone is connected by USB for some weird reason - and I have to disconnect USB for the phone to hard reset. I figured this wouldn't happen if the phone doesn't realise it has a USB connection, but when the cable was plugged in, it still wouldn't hard reset until I took it out. So it shows there must be some way the phone knows it's connected.
I'm running the WWE 1.72 ROM with radio 2.10. 50.08_2 if it helps.
Any suggestions?
*Bump*
Sorry for the bump, but it would really help if anyone could help explain this.
I think a bit of trial and error would be best here to establish whats at fault.
phone, cable, or usb port.
-try plugging into a different usb port
-try a different cable (if you have one)
appologies if you have tried these allready.
Tried another cable again just incase, still nothing though. My iPods connected via that USB port I tried using, and that's working fine, so it doesn't seem like that's it, either...
Hi:
I'm having a similar problem. I had plugged in a new retractable usb cable, and when I did, the phone shut off. I rebooted, and tried my original cable, but the phone doesn't charge or sync. I've also tried hard/soft reset, wall charger, usb charger, and none of that seems to work.
Any suggestions?
Thanks.
No idea if this is related or not but my USB connection stopped working after I got the "bttrayce.exe is not a valid pocket pc application" problem (Thanks TomTom! ) so it would appear the USB port has some weird dependencies!
Fixed it by renaming the windows\btsdkce30.dll file (added "[temp]" to the name just in case!) and soft-resetting.
Might be worth a try?
r u using activsync or windows mobile centre ???
USB Issue
I've got exactly the same issue, running HyperROM 3.01.405.T1 and Radio 2.06.51.07.
Suddenly USB isn't working, tried various cables and I suspect it's a software issue somewhere.
Charging isn't a problem at the moment, I have a charging station (ebay from Hong Kong) so I can access the phone and try and resovle this.
I'm going to go back to the stock rom (I assume I'll find that somewhere on XDA) and upddate the Radio version and see if that sorts it.
If anyone has worked out what's casuing this generally let me know as I can imagine this will take a lot of trial and error to solve!
Thanks
have you fixed it?
i am having a similar issue:
I have recently updated my HTC HD2 rom to version 3.14.410.2.
After that i have installed tomtom navigator, but when i turn on the device it returned a message 'BTTRAYCE' is not a valid Pocket PC application'.
I looked at the forums and it was recommended to delete files Windows\BtSdkCE30.dll and
\Windows\BtCoreIf.dll, so i did.
Unfortunately my usb connection is now not working, and i think it could be related to the deletion of those 2 files.
I made a hard reset, but the problem still persists.
can anyone help me please?
My problem solved
Hi i got the same problem , i use ARTEMIS 48 rom 3.14. so my phone suddenly droped to the ground last night but i was charging after that .... next days morning i wanted to connect it to my pc via activesync but it dose not connect .... even disk drive did not work and i could not charge it via AC CHARGER and PC , i toyed around with it here is what i did
1- tried on another pc (result wass the same it did not worked)
2-i hard reseted it (result = the problem was not solved )
3-i went to setting>>>>system>>>power>>>battery and unchecked the option "when phone is on , do not charge ...."
4- i connected it to pc it was not recognozed by pc but it was charging !!!!!!
5-after that i connected it to AC ADAPTOR and it was charging !!!!!!
6- i decided to flash my rom and do a HSPL so my phone will not brick so i connected it to activesync via bluetooth and it was as sucess
7-mean while i was searching this forums
8- i checked my SPL ver
9- i soft-reset and stuning it was recognized by pc and everything was back to normal
in my XP i think it was due to BAD ASS ANDROID ROM and some custom roms bugs....
fpcraveiro said:
have you fixed it?
i am having a similar issue:
I have recently updated my HTC HD2 rom to version 3.14.410.2.
After that i have installed tomtom navigator, but when i turn on the device it returned a message 'BTTRAYCE' is not a valid Pocket PC application'.
I looked at the forums and it was recommended to delete files Windows\BtSdkCE30.dll and
\Windows\BtCoreIf.dll, so i did.
Unfortunately my usb connection is now not working, and i think it could be related to the deletion of those 2 files.
I made a hard reset, but the problem still persists.
can anyone help me please?
Click to expand...
Click to collapse
Uninstall TomTom and the problem goes away.
You can download versions on TomTom Navigator 7 with the Bluetooth files removed - like * HERE *
I don't have an OS installed...
This is due to aMAGLDR being installed and when I had the device open.. I created a 'temp' folder and my next task was to create a 'create_to_sd_root', well I renamed the temp folder to that... bad move? I think so. My system acknowledges the device, however I'm unable to access it. I.e. my computer(no icon), windows mobile center(not connected), etc. Please help! I need my phone!
MrHellas said:
This is due to aMAGLDR being installed and when I had the device open.. I created a 'temp' folder and my next task was to create a 'create_to_sd_root', well I renamed the temp folder to that... bad move? I think so. My system acknowledges the device, however I'm unable to access it. I.e. my computer(no icon), windows mobile center(not connected), etc. Please help! I need my phone!
Click to expand...
Click to collapse
I you were trying to flash Android you just need to flash Clock Work Mod (CWM) and then place the .zip file for the Android ROM on your SD card and use CWM to flash the Android ROM. It is links to Youtube videos in the OP of the thread showing you how to flash CWM and the ROM.
Are you could flash back to Win MO through USB and bootloader or SD card and bootloaderr.. If you go for USB and bootloader make sure you see USB in the white bar of bootloader befor tryng to flash the ROM. Also thew SD card metrhod will remove HSPL if you use a Official and not a custom ROM.
Well I've figured out how to get the android os on there, however I'm unable to locate the drivers for AD8? I'm still unsure about what folder/files need to be on my microSD if I'm running the Desire HD Froyo(current) I cannot access any internal/external(microSD). Help?
MrHellas said:
Well I've figured out how to get the android os on there, however I'm unable to locate the drivers for AD8? I'm still unsure about what folder/files need to be on my microSD if I'm running the Desire HD Froyo(current) I cannot access any internal/external(microSD). Help?
Click to expand...
Click to collapse
You have to use MAGLDR's mass storage option to get access to your SD card, or use the mount storage option in Clock Work Mod. I recomemd usingvthecnass storagecin MAGLDR though as I have had trouble gettingvthecdrivers for mount storage in CWM to install but have never had a problem with the mass storage option in MAGLDR.
T-Macgnolia said:
You have to use MAGLDR's mass storage option to get access to your SD card, or use the mount storage option in Clock Work Mod. I recomemd usingvthecnass storagecin MAGLDR though as I have had trouble gettingvthecdrivers for mount storage in CWM to install but have never had a problem with the mass storage option in MAGLDR.
Click to expand...
Click to collapse
How do I get back the loader without booting up? Obviously haven't been able to copy the rar files. Could this be why my GPS and other functions could not be working properly?
imanh said:
3-i went to setting>>>>system>>>power>>>battery and unchecked the option "when phone is on , do not charge ...."
Click to expand...
Click to collapse
Thanks this sorted my problem!
imanh said:
Hi i got the same problem , i use ARTEMIS 48 rom 3.14. so my phone suddenly droped to the ground last night but i was charging after that .... next days morning i wanted to connect it to my pc via activesync but it dose not connect .... even disk drive did not work and i could not charge it via AC CHARGER and PC , i toyed around with it here is what i did
1- tried on another pc (result wass the same it did not worked)
2-i hard reseted it (result = the problem was not solved )
3-i went to setting>>>>system>>>power>>>battery and unchecked the option "when phone is on , do not charge ...."
4- i connected it to pc it was not recognozed by pc but it was charging !!!!!!
5-after that i connected it to AC ADAPTOR and it was charging !!!!!!
6- i decided to flash my rom and do a HSPL so my phone will not brick so i connected it to activesync via bluetooth and it was as sucess
7-mean while i was searching this forums
8- i checked my SPL ver
9- i soft-reset and stuning it was recognized by pc and everything was back to normal
in my XP i think it was due to BAD ASS ANDROID ROM and some custom roms bugs....
Click to expand...
Click to collapse
I did the same but no work. I have issue #USB not recognized# after installed Android Transformer SD ver.
In three color screen I have USB connection working fine. I could install HSPL4, update Radio, but Win 6.5 has a USB problem.
I don't think this is a hardware issue or I am wrong?
Still confused. Should I take my phone to service?
Hi,
I have the similar problem with my hd2, but worse. Out of 3 different comouters I tried none can see the phone connected and gives me the error saying one of the USB device connected to this computer has malfunctioned and cannot be recognized. I have tried two different cables. I cannot connect my phone through latest magldr using USB flasher or USB mass storage modes. Moreover, when I connect my phone in rainbow screen (hspl screen where you install magldr), it should change to USB from serial but even that does not happen. ANy solutions?? I think its my phone.... Is there any way to revert this back to normal. I don't want a brick.
mcdoc said:
I did the same but no work. I have issue #USB not recognized# after installed Android Transformer SD ver.
In three color screen I have USB connection working fine. I could install HSPL4, update Radio, but Win 6.5 has a USB problem.
I don't think this is a hardware issue or I am wrong?
Still confused. Should I take my phone to service?
Click to expand...
Click to collapse
Your USB drivers for the defualt bootloader (multicolor screen) seem to be working fine, so no you do not have a hardware problem. You might want to uninstall Windows Mobile Device Center or Active Sync, which ever one your computer uses. Then re install it. Also go to device manager in your comtrol panel while you have hour HD2 booted up and connected via USB and clck on update drivers for hour phone, it should be listed in device manager.
kushki said:
Hi,
I have the similar problem with my hd2, but worse. Out of 3 different comouters I tried none can see the phone connected and gives me the error saying one of the USB device connected to this computer has malfunctioned and cannot be recognized. I have tried two different cables. I cannot connect my phone through latest magldr using USB flasher or USB mass storage modes. Moreover, when I connect my phone in rainbow screen (hspl screen where you install magldr), it should change to USB from serial but even that does not happen. ANy solutions?? I think its my phone.... Is there any way to revert this back to normal. I don't want a brick.
Click to expand...
Click to collapse
When you say your Serial in boorloader does not change to USB this tells me you are having driver issues or hardware issues with your micro USB port on your HD2. My bet is it is just driver issues. I sugest you uninstall and rei nstall Wimdows Mobile Device Center or Active Sync which ever one your computer uses. These programs contain the USB drivers for the HD2 and MAGLDR partialy relies on those drivers to. So maybe that will solve your problem.
Hello,
here is the situation.
i have a hd2 with magldr 1.13
android in nand
android in sd
both are working fine.
im trying to flash wp7 but my pc wont even pick up the connection (device not listed in devmgmt) however the phone is charging no problem.
i have installed, uninstalled and re-installed:
android sdk tools
windows mobile device center
windows phone sdk
i have manually removed each drivers after uninstalling all these through devmgmt.msc
i have also tried all this on 2 other PCs, with the same results so far.
i will try on a 4th PC later tonight.
i havent had the opportunity to try another cable yet.
what is causing this?
Thanks,
In wmdc did you untick "allow USB connections"?
That doesn't make any sense. If you flashed Android to NAND it should Flash WP7 to NAND with the same ease.
Make sure you hate .net 4.0 installed too, I know that helped me.
on the phone do you have it set to charge only from USB?
menu button - settings - Connect to pc - Default connection type
yep "allow USB" is unticked
i have .NET 4.0 installed...
i dont even have that in android:
"menu button - settings - Connect to pc - Default connection type"
do i have a faulty phone? the last time i flashed was about 2.5 weeks ago
willrider said:
yep "allow USB" is unticked
i have .NET 4.0 installed...
i dont even have that in android:
"menu button - settings - Connect to pc - Default connection type"
do i have a faulty phone? the last time i flashed was about 2.5 weeks ago
Click to expand...
Click to collapse
I don't understand what the problem is exactly:
You connect your HD2 to your PC, load up MAGLDR and select usb flash mode.
then you're running the DAF WP7 flasher and then it fails to connect or what?
orangekid said:
I don't understand what the problem is exactly:
You connect your HD2 to your PC, load up MAGLDR and select usb flash mode.
then you're running the DAF WP7 flasher and then it fails to connect or what?
Click to expand...
Click to collapse
on the phone, nothing happens.
on pc flasher fails after a while.
also on the tri-colour HSLP boot, i can see "serial"
but i cant seem to put in "USB" mode.
i tried booting into HSPL with the USB connected but then it wont display "serial" or "USB"... it stays blank
willrider said:
on the phone, nothing happens.
on pc flasher fails after a while.
also on the tri-colour HSLP boot, i can see "serial"
but i cant seem to put in "USB" mode.
i tried booting into HSPL with the USB connected but then it wont display "serial" or "USB"... it stays blank
Click to expand...
Click to collapse
oh well if bootloader stays on serial its almost certainly hardware, cos it should switch to USB regardless of whether flashing works and drivers and what not. You say you can charge so I would suspect a broken data pin inthe socket,perhaps dirty, perhaps bad solder, perhaps faulty cable.
samsamuel said:
oh well if bootloader stays on serial its almost certainly hardware, cos it should switch to USB regardless of whether flashing works and drivers and what not. You say you can charge so I would suspect a broken data pin inthe socket,perhaps dirty, perhaps bad solder, perhaps faulty cable.
Click to expand...
Click to collapse
He's saying it doesn't say serial or USB, so it might be some software issue, "it stays blank"
I would flash stock via SD, then flash HSPL, task29, then flash magldr, then try again.
yea, but since it does say serial when usb isn't connected, means it is detecting something, because it can tell the difference. You may be right in a corrupted bootloader, but id bet its more likely hardware, shorted data pins, or a break on either the phone or the cable. (all just guesswork, of course, , , hurry up and find out, OP! minds with nothing better to do need to know! hehe)
orangekid said:
I would flash stock via SD, then flash HSPL, task29, then flash magldr, then try again.
Click to expand...
Click to collapse
@OP
+1 on that, but of course it will all stop at "stock via SD" if that doesnt fix it,because hspl gone, no usb to reapply it, no radio flashing, so no more android, just stock winmo roms,, so think carefully what you want, if you can live with what you have, id be tempted to leave it alone until you need to.
samsamuel said:
yea, but since it does say serial when usb isn't connected, means it is detecting something, because it can tell the difference. You may be right in a corrupted bootloader, but id bet its more likely hardware, shorted data pins, or a break on either the phone or the cable. (all just guesswork, of course, , , hurry up and find out, OP! minds with nothing better to do need to know! hehe)
@OP
+1 on that, but of course it will all stop at "stock via SD" if that doesnt fix it,because hspl gone, no usb to reapply it, no radio flashing, so no more android, so think carefullyu what you want.
Click to expand...
Click to collapse
That's true, if you flash stock via sd then you're back to SPL 3.03, but reflashing HSPL might be what you need to do, so it's hit or miss.
If it's hardware then you will find out this way and since you'll hopefully be back to stock SPL you could do warranty on it.
I hate to say it but that's most likely a dead physical USB port. I work on the HD2's daily and have seen this problem several times and it was 100% not software related which I have verified after a fully memory sweep and write of a JTAG dump from a working phone to the defective one. In these case the phone would also charge but had no PC connectivity either. You can however flash all the WinMO ROM's you would like over the SD-Card and definitely still benefit from the SD-Card style of booting Android ROM's so the phone is not a total wash. You can also still hope that Cotulla or some DEV will come up with a way to flash CWM Recovery from the SD-Card to the NAND. Then you could even still have NAND based Android ROM's as the CWM step is the only part of MAGLDR to Android that involves PC > Phone flashing.
The port is cheap at about $6.00 USD but the skill required to put one on is high. I don't offer it as a service yet but I'm planning on it soon as I solder frequently on JTAG ports smaller than the usb ports themselves and have the skill to do this.
EDIT: I'm also not 100% sure it's the port to blame but most likely it is. However, it could still be something inline with the USB data bus on the phone to blame.
connexion2005 said:
I hate to say it but that's most likely a dead physical USB port. I work on the HD2's daily and have seen this problem several times and it was 100% not software related which I have verified after a fully memory sweep and write of a JTAG dump from a working phone to the defective one. In these case the phone would also charge but had no PC connectivity either. You can however flash all the WinMO ROM's you would like over the SD-Card and definitely still benefit from the SD-Card style of booting Android ROM's so the phone is not a total wash. You can also still hope that Cotulla or some DEV will come up with a way to flash CWM Recovery from the SD-Card to the NAND. Then you could even still have NAND based Android ROM's as the CWM step is the only part of MAGLDR to Android that involves PC > Phone flashing.
The port is cheap at about $6.00 USD but the skill required to put one on is high. I don't offer it as a service yet but I'm planning on it soon as I solder frequently on JTAG ports smaller than the usb ports themselves and have the skill to do this.
EDIT: I'm also not 100% sure it's the port to blame but most likely it is. However, it could still be something inline with the USB data bus on the phone to blame.
Click to expand...
Click to collapse
If this is the case I wouldn't flash stock via SD since you have no way to flash HSPL after that.
Just bought a used HD2 (TMOUS). I checked the bootloader and it already had HSPL installed. However, I wanted to flash stock ROM and do task29 prior to installing HSPL again myself.
I flashed the stock ROM v3.14.531.1 via microSD card method. Then I tried to run task29 and it failed. Bootloader wouldn't detected the USB connection. I also try to install HSPL but it doesn't work. I get an error: USB COnnect Failed!
When I connect to PC or wall charger, the phone charges perfectly fine. I even see the icon that says its connected.
When I am on the bootloader and connect the phone to my PC via USB, the white background area says "Serial" and it doesn't change to "USB".
I tried using different USB cables and also different PC, but still no luck.
What is wrong? Why can't I connect via USB? Help please.
Have you tried droidexployer? Doubt that'll work but worth a shot. What might be wrong is you don't have the proper drivers installed.
Sent from my Desire HD-2 using XDA App
htccraze said:
Have you tried droidexployer? Doubt that'll work but worth a shot. What might be wrong is you don't have the proper drivers installed.
Sent from my Desire HD-2 using XDA App
Click to expand...
Click to collapse
Droidexployer is for devices running rooted android. mine is still stuck on windows, i can't install hspl in order to run android...
i am sure its not a driver problem because i have another hd2 which connects perfectly fine.
Have you tried it on a different usb port on the pc? Sometimes one will work while another won't for some reason. Also remember to check the options in ActiveSync or WMDC to ensure usb connections are allowed, seems a stupid mistake, but one I have made myself before. If all that fails, maybe try on a different pc or with a different usb cable. Sorry for the super simple answers, I see you're not a brand new user, but its often these simple little things that hang us up
Change the battery
Change the battery ?
I seen your comment that said you already had hspl so I just assumed it was on android, sorry. Yea the different usb ports is a great idea if it wasn't for the fact that you even tried it on a different computer as well. Since you said you bought it used would you mind saying where from? I've known people who have problems with they're phone & can't find out how to fix it so they try and sell it on ebay. If you did get it from there the best thing to do is contact the seller and explain your problem. Ask if it had this problem before and say you don't want this phone if it's not repairable. With ebay you only have a short time to file a complaint if it leads to that.
Sent from my Desire HD using XDA App
another "simple" thing..
check for dirt or fluff in usb port
same here but I have EU version of HTC HD2...
also i Have MIUI 1.8.5. Gibgerbread 2.3.5 and same thing with bootloader...when start phone everything works fine !!!
If you find any solutions please write it to me so i can solve problem! Thanks
Are you able to charge the phone? if not, it's possible the microusb port is broken.
yes able to charge phone....i think its manufacture something cause tryed to connect to other PC with other USB and still same prob.
sportman123 said:
yes able to charge phone....i think its manufacture something cause tryed to connect to other PC with other USB and still same prob.
Click to expand...
Click to collapse
Have you installed windows mobile device center?
I am having the same issue. It worked a couple weeks ago. Now I can not get USB connection in MAGLDR or Bootloader...
Any help?
Yeah, me too.
Get your self a new sparkly xoom and wanna put android on my hd2. Oh well no mobile internet for my xoom. Unless any one knows of any wm6.5 app/prog that'll do it?
Arty U.K.
Hello,
Today i have tryed to flash a new CWM on my HD2.
But i get always an error "USB init. Failed" so i've searched in google an in this forum for an solution but i haven't find any.
I've tryed to flash CWM in Bootloader mode but my pc's (2 XP ones and 1 Win7) don't detect my phone.
Please Help
install windows mobile device center to your pc.otherwise it doesn't recognize it.
I have installed WMDC. But it doesn't recognize it at all.
but cwm isnt flashed from bootloader? r u using magldr or clk?
MAGLDR but also in Flasher mode nothing happend. In WMDC i have already disabled USB Connections but also -.- nothing
try another pc. and last solution format pc(i did so a few weeks ago when i met the same problem)
after last time i formated my computer imy phone wasnt detected in computer ...in bootloader i couldnt see USB just serial ...i just installed activesync ...and right after phone was detected ...so try to install activesync and see
[q] htc hd2 flashing rom issue
Can anybody help me.I have MAGDLR and the Bootloader installed by a previous chap who owned the phone, all the correct versions. THe phone HD2 (T-Mobile), when I got it, had Gingerbread on,but the FM radio was not working,
so I thought an Upgrade was in order. I went to the MIUI website and downloaded the latest stable rom and followed the instructions as best as possible, but I had problems with the
Bootloader going from Serial to USB and being able to flash the rom like that. I then tried the loading the rom ZIP file to the SD card, and then using Clockwork orange recovery to
to install the ZIP file from SD card. That being said, I rebooted and the phone just stayed hung on the HTC logo screen. (And I didn't do a back up, before I started.)
I eventualy found a Jaws MIUI rom, that instaling via Clockwork Orange, worked, but it is Froyo and not a lot of stuff works very well. What is the correct procedure to install
from SD card, with Clockwork Mod Recovery? The Roms that I download, do I have to unpack the zip, do something on the files? I have read that depending on the rom that you have, when
doing a ClockWorkMod Recovery installation, that you need to have the right Size partition or image disk version of the Clockwork recovery MOD, But I can't swap and change this as my USB does not work between the phone and the PC.
I have installed active sysnc, does not work and I have tried this both on my Desktop and Laptop. As the one response suggests, Formatting your PC seems a bit extreme.
Help, Pleeeeeeeeez!
Thanks
Asdoos said:
Hello,
Today i have tryed to flash a new CWM on my HD2.
But i get always an error "USB init. Failed" so i've searched in google an in this forum for an solution but i haven't find any.
I've tryed to flash CWM in Bootloader mode but my pc's (2 XP ones and 1 Win7) don't detect my phone.
Please Help
Click to expand...
Click to collapse
try with another usb cable
After many tests with other PC´s and USB cables and different Windows / Linux installations I have noticed that my phone doesn't charge -.-
I think its an Hardware Porblem of my Phone. Does anyone know how to fix it?
Usb port is gone on your phone get it replaced.
Sent from my HTC HD2 using XDA App
Hello, I'd love to mention one thing bec I got the same problem like some fri. No need to worry fri.My problem troubleshooting is " Just install Windows Mobile Device Center". Thanks all and I love xda.