Related
HI all
I am be in progessing update Rom from 4.00.11 to T-mobile 4.00.16 At 99% i dont know why it stoped and can not finish ??? Now i think Rom death aready , Can not sync with PC , My Bootloader V5.17 , any one here please tell me how to fix it ? I think now have to downgrade it to Bootloader V5.15 ( I think ) I try to read backup from CE to SD but it warn invalid card key , PLease help it ugent
Thank you
"but it warn invalid card key"
huh ?
Get the XDAtools and run the bootloader fix tool contained within.
Good luck..
XDA developer Peter Poelman said:
Get the XDAtools and run the bootloader fix tool contained within.
Good luck..
Click to expand...
Click to collapse
if the OS not working, you cannot use XDAtools!
you should backup before upgrading.
Hi
Thank you , it work fine now
I need help please, my phone gets stuck after the tmobile startup screen. I installed the WM6 Titanium correctly, after that I installed some spanish translations and everything was perfectly fine, then I deleted the spanish translations and after that my MDA gets stuck!!! What can I do, I cant even get it started!! PLEASE HELPPPPP !
THANKS
Soft Reset or Hard Reset,see if it helps,otherwise, as the extended rom has become corrupted due to installation/deletion of files.The only way out is to reflash the rom again.
Cheers!
and how can I reflash again?? I am sorry, Im just a noob in this.
If you could tell me the steps, that would be great!! Because I really dont know what to do because it doesnt let me! It just gives me the tmobile screen and after that it blacks out. I cant even soft or hard reset.
I really appreciate it!!
charro_mc said:
and how can I reflash again?? I am sorry, Im just a noob in this.
If you could tell me the steps, that would be great!! Because I really dont know what to do because it doesnt let me! It just gives me the tmobile screen and after that it blacks out. I cant even soft or hard reset.
I really appreciate it!!
Click to expand...
Click to collapse
Oh C'mon !!!
Don't give me this "and how can I reflash again?? I am sorry, Im just a noob in this. "
Just above in your post you said "I installed the WM6 Titanium correctly"
How did you flash it ? and then you installed Spanish translations.
Oops!
BTW, how come,if you flashed the 'wm6 Titaniun' rom and still stuck on T-mobile splash screen.Strange ? if your flash went successful ,your splash screen shud change to the newer wm6 rom and shud not be T-mobile.So,either you were not able to flash the wm6 Titanium or you reverted back to T-mobile official rom.
Is your phone SIM/CID unlocked ?
Cheers!
Ok, here is my problem again.
I CANT GET TO THE WINDOWS MOBILE STARTUP!!!
I turn the phone on, I get the IPL/SPL 2.26 screen and after that BOOM, the screen gets black and I cant do anything!!!
What can I do if i cant even see the Windows Mobile Screen!!??
Hi,
I know, I know. I screwed up, and I don't know how to fix it.
I have tried everything on these forums and I am out of ideas.
My wing is stuck at the splash screen.
My IPL is 4.10.0002
My SPL is 4.70.Yang
I am running windows xp.
I have tried to flash using stock rom (I hear the computer making contact with the wing), but when I try to flash no matter what I do, I get a "[FONT='Arial','sans-serif']ERROR [260] : CONNECTION"[/FONT]
[FONT='Arial','sans-serif']I don't know what else to do.[/FONT]
[FONT='Arial','sans-serif']Thanks to anyone who can help me.[/FONT]
fcorom said:
Hi,
I know, I know. I screwed up, and I don't know how to fix it.
I have tried everything on these forums and I am out of ideas.
My wing is stuck at the splash screen.
My IPL is 4.10.0002
My SPL is 4.70.Yang
I am running windows xp.
I have tried to flash using stock rom (I hear the computer making contact with the wing), but when I try to flash no matter what I do, I get a "[FONT='Arial','sans-serif']ERROR [260] : CONNECTION"[/FONT]
[FONT='Arial','sans-serif']I don't know what else to do.[/FONT]
[FONT='Arial','sans-serif']Thanks to anyone who can help me.[/FONT]
Click to expand...
Click to collapse
HAVE YOU TRIED FLASHING ON ANOTHER COMPUTER I DID THAT I WAS ABLE TO GET EVERYTHING WORKING
i did it on 2 computers
it seems like it's going to do it. the flashing process stops at 1% the wing resets and then i get the same error message.
fcorom said:
it seems like it's going to do it. the flashing process stops at 1% the wing resets and then i get the same error message.
Click to expand...
Click to collapse
Have you tried flashing from the MicroSD card?
Flash from SD Card
I tried, it is not working. I followed all the steps. I really don't have any ideas as to what i can do.
fcorom said:
I tried, it is not working. I followed all the steps. I really don't have any ideas as to what i can do.
Click to expand...
Click to collapse
wait... when your device is Hard-spl then there MUST be a possibility to flash a rom.
take one you flashed before and put your phone in bootloader first. then connect and flash...
good luck.
Thanks for your help
The problem was that when i was flashing the wing, it would reboot and the flashing tool, all of them, would lose connection.
what i did is when it reboot, i immediately after that i put it in downloader mode. i was able to flash the stock rom after that.
so thank you all who saw my post and for the advice i got.
hai, i have a problem with my XDA, when i flash it with a new rom in a middle of the process it's stoped. i try to hard n soft reset, but my XDA won't respon. please help me !! i have bootloader v5.17, how to downgrade it to v.5.15 so i can flash from SD. i have read how to downgrade it but i don't understand
i try use XDArit but i get a "Failed to open device \\.\PhysicalDrive5" error
plz, anyone can help me ?? im sorry for my bad english..thx
Broken Wallaby? Want a new one?
Sorry, I can't help you with the specific issue, but if you or someone else wants to get a new Wallaby, send me a PM.
You can also bid on the following: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=200217603790&ssPageName=STRK:MESE:IT&ih=010
learning by doing....try to find & solve your problem at www.romkitchen.de
I need help please my htc is stcuk in bootloader!! This is the first time i was flashing my phone.... And there is not custom rom yet installed its just the process of getting hspl.. The situation was i was connceting it to hspl and when it was connecting i accidentally disconnected it! Now its stuck on bootloader!! And it wont connect to active sync!! The spl is 2.10.000 and white part of the tri coulor saids usb. Now can someone please help me!!! I really like the phone and im trying not to lose it!! Please tell me if my phone is broken or not.. And if it isnt please let me know how i can fix it!!! Please need quick response!! I CANNOT ACCESS MY PHONE AT ALL ITS JUST IN BOOTLOADER!
jash23 said:
I need help please my htc is stcuk in bootloader!! This is the first time i was flashing my phone.... And there is not custom rom yet installed its just the process of getting hspl.. The situation was i was connceting it to hspl and when it was connecting i accidentally disconnected it! Now its stuck on bootloader!! And it wont connect to active sync!! The spl is 2.10.000 and white part of the tri coulor saids usb. Now can someone please help me!!! I really like the phone and im trying not to lose it!! Please tell me if my phone is broken or not.. And if it isnt please let me know how i can fix it!!! Please need quick response!! I CANNOT ACCESS MY PHONE AT ALL ITS JUST IN BOOTLOADER!
Click to expand...
Click to collapse
Flash a stock ROM first, then re-flash the SPL. You, sir, got lucky. If that thing had stopped while it was actually flashing, you'd have a brick.
bro uhm can u like send me instructions for it?? and the files for the stock rom.. cause again this is my first time and id really appreciate it if yu would... and btw i used hspl to try to flash it... and everytime i tried to reflash it without a "stock ROM" it saids error bad spl.... so i dont know what to do.. but u said to try to reflash it with a stock rom so if u can tell me how to do that,, that would be great.. btw my phone is not bricked right???
jash23 said:
bro uhm can u like send me instructions for it?? and the files for the stock rom.. cause again this is my first time and id really appreciate it if yu would... and btw i used hspl to try to flash it... and everytime i tried to reflash it without a "stock ROM" it saids error bad spl.... so i dont know what to do.. but u said to try to reflash it with a stock rom so if u can tell me how to do that,, that would be great.. btw my phone is not bricked right???
Click to expand...
Click to collapse
Nope. As long as you can see the bootloader, you ain't screwed
Ill post a detailed post in a few minutes
What provider is your HD2?
T mobile... And btw I can't connect to my active sync swell is that ok?
uhm can u send my the details?? im t mobile.... my provider is t mobile... and i cant connect to active sync.... just letting u know
it would help everyone help you if you would update your info with cellphone provider, country, etc.
I'm guessing tmobile usa right???
Ok, go here for a stock ROM (you might have to register):
http://forum.ppcgeeks.com/1664046-post1.html
In that post, download the 2.13 stockrom.
Connect your phone via usb to your computer while in bootloader (should say usb at the bottom). Your phone cannot connect via active sync because you probably don't have a ROM on it at the moment.
Unzip and run the Rom Update Utility (RUU) and follow the instructions. This will take you back to stock.
After doing this, I suggest your read here:
http://forum.xda-developers.com/showthread.php?t=653614
If you are not tmobile usa hd2, then disregard above and find stock ROM for your carrier.
uh i am usa t mobile.. btw can u add me on aim??? if u have one so u can like help me.. pls.. my aim is [email protected]
jash23 said:
uh i am usa t mobile.. btw can u add me on aim??? if u have one so u can like help me.. pls.. my aim is [email protected]
Click to expand...
Click to collapse
sorry, I don't instant message. Just follow the instructions and you should be fine.
ok but ur in here just incase i need questions right?? and btw do i need to take my sim and sd card out of the phone when i do this??
btw bro the 2.13 rom downloaded really fast.. is that ok???
uh do i really need to flash it again for it to work?? or after i finish flashing stock rom will i be able to go back to my normal phone again.. cause after all of this im not that interested in custom roms.. i just wanna get my phone back to old wm6.5
hey i did the steps u told me and its still the same ****.. but i can go to bootloader.. now do i have to flash it regular?? cause i still cant access my phone.. but i went through the whole process
bro when i tried to flash it again.. its said that bad spl version.... should i try the process again???
jash23 said:
bro when i tried to flash it again.. its said that bad spl version.... should i try the process again???
Click to expand...
Click to collapse
you may have corrupted the SPL with that bad flash.
nrfitchett4 said:
it would help everyone help you if you would update your info with cellphone provider, country, etc.
I'm guessing tmobile usa right???
Ok, go here for a stock ROM (you might have to register):
http://forum.ppcgeeks.com/1664046-post1.html
In that post, download the 2.13 stockrom.
Connect your phone via usb to your computer while in bootloader (should say usb at the bottom). Your phone cannot connect via active sync because you probably don't have a ROM on it at the moment.
Unzip and run the Rom Update Utility (RUU) and follow the instructions. This will take you back to stock.
After doing this, I suggest your read here:
http://forum.xda-developers.com/showthread.php?t=653614
If you are not tmobile usa hd2, then disregard above and find stock ROM for your carrier.
Click to expand...
Click to collapse
uhm i also did the ruu thing but i dont think it was my spl.. cause my spl that said on the bootloader screen saids 2.10 but you told me to flash it using 2.13 stock rom.... i tried it but it did not fix the problem... my htc is tmobile usa btw... and i tried reflashing it after the stock rom flash and it still doesnt work. it saids error bad spl when i try to reflash it using hardspl... do i need to use a different stock rom? let me know plz.. email me my email is [email protected]
rr5678 said:
you may have corrupted the SPL with that bad flash.
Click to expand...
Click to collapse
uhm is there anyway i can fix that corrupt spl and still get my phone to start working again??? please let me know.. cause like i said this is my first time... and like i accidentally disconnected usb when it was in the middle of connceting in hspl... is there a way i can fix it??? cause u said as long as its in bootloader mode i can fix it still...
I don't know then. When you put it into bootloader and run the RUU what happens? Does it start then error out at a percentage? Not start at all?
nrfitchett4 said:
I don't know then. When you put it into bootloader and run the RUU what happens? Does it start then error out at a percentage? Not start at all?
Click to expand...
Click to collapse
no bro it went through the whole ruu process... without active sync though cause again i cant connect to active sync... then once i went through the RUU process it didnt do anything.. my spl still said 2.10 in the bootloader screen.. and i still cant connect to active sync.. thats why i think the hspl part wont work... should i try a different hspl? cause i think this one isnt compatible with mine... and how come my spl on bootloader is still 2.10??? i thought we updated stock rom to 2.13??? but yah it went through the whole RUU process. i even tried doing the RUU PROCESS LIKE 3 MORE TIMES STILL DIDNT WORK... DO I HAVE TO DO THE SD CARD THING OR WHAT???