Related
(Was: Help me... Help me... Help me... Anyone help me !!!)
Hi all!
I stuck in WM2003PE v. 4.00.10. Since I have been updated to it, my XDA cannot use phone function. Cannot receive calls and while I make a call... appear a popup menu from signal: "The operation failed". I so sad, I don't know what to do now :x . Anyone help me ???
My XDA is:
Wallaby Bootloader: 5.17
ROM version: 4.00.10 (I feel a vindictive hatred for it :x :x :x )
Radio Stack: 4.21
I'm from ASIA
As you known I can not downgrade from this ROM version by exe file.
I can not downgrade from this ROM version by SD card because my Bootloader is 5.17
XDAtools is a new tool. Can I use it to downgrade my XDA? Tell me method by detail, please (sorry, I don't want to sad again).
Thank for all
You CAN downgrade to say, 3.17 (Thats my TMobile version) if you have the nk.nbf file and use the XDA Tools.
You have to do it via the Wallaby Boot loader method... by placing the ROM on an SD card (via XDA Tools). To do this, I think that you need an SD card reader, as XDA Tools does not seem to do it via the phone...
There are instructions on how to do this as well as
A BIG WARNING about 5.17 boot loader.
I did it on my TMobile phone, with Bootloader 5.15.
So, do NOT follow the instructions I have stated here, read on this site and in the forum about how to flash your rom via the SD CARD Method.
That should do it for you..
BTW, when you write the ROM to the SD CArd, it WILL erase the SDCard data, so save off your stuff before you do this.
J
Thank jta
But, How do I have to downgrade my Bootloader from 5.17 to 5.15?
I tried XDAtools but no success
Anyone idea?
Hi VHS,
My XDA had bootloader 5.17 like yours, and I was stuck with T-Mo 4.00.10 also. I was able to correct the situation though, by doing the following:
I changed the bootloader with XDAtools from Jeff (it has 5.15 included), by running the “Fix broken bootloader” part of the program.
Then, I used SDcard/bootloader method to go back to 4.00.05, and successful. I knew I could use XDAtools also for doing this, but I preferred the SDcard/bootloader’s way then. Mind you that, using SDcard/bootloader’s way was very easy after you downgrade from 5.17 to 5.15. Since then, I could flash whichever rom I want, but not 4.00.10.
If you want to do the same, please read as much for the detail from the various forum here and carefully.
I hope this helps.
Hi beeheij!
Can you tell me the way in order to downgrade my bootloader from 5.17 to 5.15 by detail? I tried a lot of time but no success. I don't know why. And you tell me go back v.4.00.05 by SD Card.
I'm grateful to you very much
Has it occured to you that
"Help me... Help me... Help me... Anyone help me !!!"
is a really, really, really bad subject line ? I changed it to something which may get many more people to take a look and possibly help you...
If you can still use ActiveSync, you could try to use Jeff's version of the XDAtools to downdgrade the bootloader to 5.15, and work your way out from there...
Hi guys i really hope u guys can help me with my DEAD xda. The problem with it now is it does start or on at all after i tried to downgrade the bootloader from 6.22 to 5.15 using the sd card method. Here is a detailed description of what i did....
First i downloaded the Updated wallaby patch tool for bootloader 6.22 from 1 of the links i found on this forum then i wrote it to a sd card using xdarit.exe It worked fine and patched my bootloader 6.22 so i could access the extra functions... Then i removed the sd card and went on to write the 5.15 bootloader file to it using the xdarit also... i selected at least 5.17 for the header cos my currect bootloader was still 6.22 (Maybe this is the cause of the whole problem?) and i went on to write the file to the sd card... after that i insert it back to my xda and select restore sd and was prompted with an invalid rom image but i selected continue since i thought i didn't write any rom images to the sd card and so the invalid rom image error.. after that i was greeted with a bootloader image heading and i pressed action to start the overwriting of the bootloader... All went well and the checksum was ok... Lastly i was asked to cold reset the xda and my xda never went back on again.... The most i could do was to get the xda to a blank white screen doing a conbinations of holding power, resetting and hard resetting.... Can you guys help me? I know i'm in deep ****.....
Man!
Well I've never messed with the boot loader as far as down nor upgrade but I think you should have used XDATools instead of XDARit to do the job.
Anyhow take a look at the below thread you might finds some useful info. there:
XDATools thread:
http://xda-developers.com/forum/viewtopic.php?t=2189
Download:
http://cuba.calyx.nl/~jsummers/XDA/XDAtools-Jeff.exe
HTH
Jaron said:
Hi guys i really hope u guys can help me with my DEAD xda. The problem with it now is it does start or on at all after i tried to downgrade the bootloader from 6.22 to 5.15 using the sd card method. Here is a detailed description of what i did....
The most i could do was to get the xda to a blank white screen doing a conbinations of holding power, resetting and hard resetting.... Can you guys help me? I know i'm in deep ****.....
Click to expand...
Click to collapse
You phone is dead, only hardware solution could help you!.
U mean changing the whole damn xda? [/b]
Jaron said:
U mean changing the whole damn xda? [/b]
Click to expand...
Click to collapse
yes!
if you don't have working OS or working bootloader, only hardware solution could help you!
Hey Jaron
Send your xda to cgigate.
He can repair it for you (of course u have to pay him).
He just fix my own one and I am waiting for the returned MDA.
BTW, I've done the same silly thing that you did.
Hope it's help.
Hi guys.
I tried unlocking the CID with Lokiwiz0.2b but keep getting the error249 invalid vendor ID problem.
I updated my KJam with the latest iMate ROM thinking it had A2DP, but found it doesn't. I now want to flash the Qtek test WWE ROM which does. BUT after running Lokiwiz and selecting option C and then trying to update the ROM I keep getting the message.
I have tried unbundling Lokiwiz again in case it was a problem there, but no joy.
Any ideas anyone? or has it anything to do with the new ROM that maybe Lokiwiz can't address yet?
sangasanga said:
Hi guys.
I tried unlocking the CID with Lokiwiz0.2b but keep getting the error249 invalid vendor ID problem.
I updated my KJam with the latest iMate ROM thinking it had A2DP, but found it doesn't. I now want to flash the Qtek test WWE ROM which does. BUT after running Lokiwiz and selecting option C and then trying to update the ROM I keep getting the message.
I have tried unbundling Lokiwiz again in case it was a problem there, but no joy.
Any ideas anyone? or has it anything to do with the new ROM that maybe Lokiwiz can't address yet?
Click to expand...
Click to collapse
Your solution is to downgrade to the previous kjam rom, then cid unlock, then flash the Qtek rom.
Just run the K-JAM_WWE_1010903_106_10110_ship.exe upgrader to err downgrade. ;-)
summiter said:
sangasanga said:
Hi guys.
I tried unlocking the CID with Lokiwiz0.2b but keep getting the error249 invalid vendor ID problem.
I updated my KJam with the latest iMate ROM thinking it had A2DP, but found it doesn't. I now want to flash the Qtek test WWE ROM which does. BUT after running Lokiwiz and selecting option C and then trying to update the ROM I keep getting the message.
I have tried unbundling Lokiwiz again in case it was a problem there, but no joy.
Any ideas anyone? or has it anything to do with the new ROM that maybe Lokiwiz can't address yet?
Click to expand...
Click to collapse
Your solution is to downgrade to the previous kjam rom, then cid unlock, then flash the Qtek rom.
Just run the K-JAM_WWE_1010903_106_10110_ship.exe upgrader to err downgrade. ;-)
Click to expand...
Click to collapse
Tried doing that but I can't downgrade. The RUU says says I must get an up to date version. I recall when I loaded the new ROM it said I can't go backwards afterwards.
Does anyone know how can I do that?
don't know if this would work but have you tried bootloader mode?
unable to unlock CID for my Imate Kjam
Can any one help me to unlock CID for my Imate Kjam.
I am unable to install WM6.
Will appreciate the help.
what is your ipl-spl
chg1282002 said:
what is your ipl-spl
Click to expand...
Click to collapse
mine its 2.16.0001 , can anyone help me? iv already search and see many threads about this but with no result for me =\ i think first i have to unlock the CID then update the rom... but still no result =\
johnnybazukatone said:
mine its 2.16.0001 , can anyone help me? iv already search and see many threads about this but with no result for me =\ i think first i have to unlock the CID then update the rom... but still no result =\
Click to expand...
Click to collapse
Hi i see yours is G4.
the way i CID Unlocked my wizard to install WM6.5 is:
I Downloaded SoftSPL ( it Temp removes the lock )
--- http://forum.xda-developers.com/attachment.php?attachmentid=50344&d=1189619527 --
So after you downloaded that unZip it and inside there will be 2 CAB files.
move the CABs to your phone:
Cert_SPCS.cab )install on Phone 1st(
EnableRapi.cab )install on phone 2nd(
:
After you have installed them
Move The Rom you want to install into the SoftSPL Folder And Rename the ROM
nk.nbf
Then make sure the Phone is connected to Pc via Cradle/Cable
Then Just Run START-sSPL.exe (inside SoftSPL folder on pc)
tick and next on the screens that come up and then you mobile screen goes White (Dont Worry) then it will load rom you will have a bar on Desktop that loads to 100% .. just Let it finish then mobile reboots and you should be fully loaded with your copy of WM6
Hope This Helped
johnnybazukatone said:
mine its 2.16.0001 , can anyone help me? iv already search and see many threads about this but with no result for me =\ i think first i have to unlock the CID then update the rom... but still no result =\
Click to expand...
Click to collapse
Hi i see yours is G4.
the way i CID Unlocked my wizard to install WM6.5 is:
I Downloaded SoftSPL ( it Temp removes the lock )
--- http://forum.xda-developers.com/attachment.php?attachmentid=50344&d=1189619527 --
So after you downloaded that unZip it and inside there will be 2 CAB files.
move the CABs to your phone:
Cert_SPCS.cab )install on Phone 1st(
EnableRapi.cab )install on phone 2nd(
:
After you have installed them
Move The Rom you want to install into the SoftSPL Folder And Rename the ROM
nk.nbf
Then make sure the Phone is connected to Pc via Cradle/Cable
Then Just Run START-sSPL.exe (inside SoftSPL folder on pc)
tick and next on the screens that come up and then you mobile screen goes White (Dont Worry) then it will load rom you will have a bar on Desktop that loads to 100% .. just Let it finish then mobile reboots and you should be fully loaded with your copy of WM6
Hope This Helped
hey guys.. i need some help
i installed an app an asked me to restart the device.. i did
and now it's stuck on the splash screen
IPL 2.27
SPL 2.27
GSM 02.44.11
OS 2.27.1.1
and the orange brand wallpaper
what can i do? i tried to reset it and format it
but an error shows up
"Press Send to restore factory default,
Other keys to quit"
ok.. send it is
"Format FAT Partition
Format failed"
i can enter RGB bootloader (cam button+power), but i don't know what i can do??
ps: i just got it from a friend, i don't think my phone is cid-unlocked..
and i'm stuck at the splash screen and nothing to do
please help me.. tell me what can i do
Ouch.
Sounds like the built-in flash memory is bad. I'm not sure what you can do about that, short of replacing it.
No offense Reverend, but where did you hear that? Its just bad flash man! Simply enter the bootloader mode, and re-flash a new rom to your device. What program where you trying to install?
ashasaur said:
Its just bad flash man! Simply enter the bootloader mode, and re-flash a new rom to your device. What program where you trying to install?
Click to expand...
Click to collapse
something from a pocket freeware site.. "XDA-Team_Manilla2D.CAB"
it's a touchflo 2d app for today screen.. after installing it, the sistem wouldn't boot up anymore. so i tried to format, soft reset, to restore the system..
the formatting started and then gave an error and shut down immediately. i didn't even catch a glimps of that error 'cause it restarted.. and then the problem. it won't go past the operator splash screen
tried to reformat.. would't start.. format failure
..simply wow.. don't get me wrong , but i didn't knew there was a bootloader screen until this happened.. i dug up about this problem on the forum, but i can't solve it.. i don't know that much about flashing.. isn't the wizard supposed to be cid-unlocked to be able to flash it with a new rom?
or there's a rom that doesn't require the pda to be unlocked?.. cause' i think mine isn't. and, since i can't get it to boot up the os, i can't cid-unlock it after the tutorials i've found here..
and i don't want to bury it, yet
Oh you poor sole...that program that you tried to flash is notorious...I did the very same thing to mine just the other day. It doesnt work with the Wizard yet for some reason.
Now, onto your problem, yes-I think that your Wizard IS INDEED CID locked, and if that is the case, search for the Wizard LOVE ROM and flash it. It can be flashed with a CID unlocked device. Head into your bootloader mode, then start up the RUU flashing program on your PC that is included with the ROM. After it flashes, you can use the Wizard Service Tool, which is also availible via searching to CID and SIM unlock your device, and then you can put any ROM that you like onto it. I hope that helps somewhat!
If you can get it into bootloader mode, you can recover. If the phone is not unlocked, you will have to load the original service ROM for that phone.
You MIGHT get lucky by just flashing the IPL/SPL back though, now that I think about it...look at the "How to Remove HardSPL" thread for the most popular IPL/SPL sets. If this works, you won't have to put all of your custom settings and programs back on.
Myrddin Wyllt
Plz note all the IP/SPL posted in the thread 'How To Remove HardSPL' are for G4 devices and they are not meant to be flashed to a G3 device,if flashed will certainly 'Brick' the G3 device.
Whereas,here ,he has a G3 device with IPL/SPL 2.27,flashing those IPL/SPL (Bootloaders) means instant death of the phone.
koolariz
Simply,download the official stock rom of the carrier and flash it in Bootloader mode to recover back to its default status,than downgrade to IPL/SPL 1.xx to CID unlock the phone,how to CID unlock the phone, read and follow this guide carefully :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
zabardast_1 said:
koolariz
Simply,download the official stock rom of the carrier and flash it in Bootloader mode to recover back to its default status
Click to expand...
Click to collapse
i can't find anywhere the original one.. my wizard is in orange.ro carrier [orange spv m3000].. i tried on varios romanian discussion site's but only found radio rom's i'll keep searching...
any ideea what other kind might work with cid-locked?
i found this one on xda ftp:
Orange_SPV_M3000-FRA
Orange SPV M3000 ROM update 2.18.1.3
on ftp://[email protected]/Wizard/Roms/Orange/
If it is truth....
koolariz said:
i can't find anywhere the original one.. my wizard is in orange.ro carrier [orange spv m3000].. i tried on varios romanian discussion site's but only found radio rom's i'll keep searching...
any ideea what other kind might work with cid-locked?
i found this one on xda ftp:
Orange_SPV_M3000-FRA
Orange SPV M3000 ROM update 2.18.1.3
on ftp://[email protected]/Wizard/Roms/Orange/
Click to expand...
Click to collapse
If you have said the truth... you've got a G3 device cause your ipl spl are 2.27.
So try to install this original ROM... is for Tmobile WWE so try it.... http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html
Or search on tutorials tu unlock and upgrade the wizard Love ok?
Good luck men...
And please please please read and ask before do anything, BTW now the only you can do is to runn this ROMs cause you cant get your original carriers ROM.
If this dont works... please read the thread from upgrading forum in this wizard subforum that said something like Stuck on splash screen solution DYI or something the tuttorial DEV is called Drug_store.
zabardast_1 said:
Myrddin Wyllt
Plz note all the IP/SPL posted in the thread 'How To Remove HardSPL' are for G4 devices and they are not meant to be flashed to a G3 device,if flashed will certainly 'Brick' the G3 device.
Whereas,here ,he has a G3 device with IPL/SPL 2.27,flashing those IPL/SPL (Bootloaders) means instant death of the phone.
Click to expand...
Click to collapse
Good catch. Sorry about that!
Myrddin Wyllt said:
Good catch. Sorry about that!
Click to expand...
Click to collapse
Nah! buddy,you are doing fine,its just we sometime overlook the post,it happens to all of us,so no harm done !
koolariz said:
i can't find anywhere the original one.. my wizard is in orange.ro carrier [orange spv m3000].. i tried on varios romanian discussion site's but only found radio rom's i'll keep searching...
any ideea what other kind might work with cid-locked?
i found this one on xda ftp:
Orange_SPV_M3000-FRA
Orange SPV M3000 ROM update 2.18.1.3
on ftp://[email protected]/Wizard/Roms/Orange/
Click to expand...
Click to collapse
YES ! you can try this rom or download the WWE (English) version of Orange SPV M3000 Official WM5 Rom from here :
http://www.megaupload.com/?d=5OZEILXK
zabardast_1 said:
YES ! you can try this rom or download the WWE (English) version of Orange SPV M3000 Official WM5 Rom from here :
http://www.megaupload.com/?d=5OZEILXK
Click to expand...
Click to collapse
10x a lot.. i hope it won't die on me..
LE:
i tried the O2 rom [12.18.3.103] u gave me. it doesn't start flashing.. 0% and then
quoting:ERROR "This NBF file cannot be used for your PDA phone. Please get newer NBF file."
ps: The orange one on the xda ftp server doesn't work .. it's archived and parts are missing..
Hmmm,ok,lets try this out,download 'Button's Rom 1.05' from the link posted below and check if this works out.
Otherwise,you'll have to look for official Stock Rom (Romanian),which was running on the phone before.
http://wiki.xda-developers.com/index...0for newbies
i'll try this one.. for now.. ps:your link is broken?
i just have another question.. i have a friend with the same wizard as mine, i mean in the same carrier.. is it possible cu get his rom? to dump it on SD card.. or something?
so that i may flash that rom?
LE:
i found another thing on a DIY
If you got IPL/SPL 1.xx go to G3.3. If you got 2.xx go to G3.4
G3.3 Download button rom and flash it to your device. Your device should startup again after doing this. Go to G3.5.
G3.4 Download wizard_love rom and flash it to your device. Your device should startup again after doing this. Go to G3.5.
Click to expand...
Click to collapse
should i try the wizard_love rom?
ok,download Button's Rom 1.05 from here:-
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
also try this one :-
xda_miniS_LaunchRom
http://rapidshare.com/files/43423464/Xda_MiniS_LaunchROM_v154102.exe
and yes! you can also try Wizard_Love _Rom.
Now,its possible to back up the rom from your friend's phone,but it also have to be CID unlocked first and your device shud also be CID unlocked to flash it from the sdcard (MTTY) method.
pfff (
i've updated the rom with the Wizard_Love_2.26.10.2_WWE_Novii_CF2 and now i have a blue sci-fi splash screen with "AKU 2.3" in the top-right corner..
IPL 2.27
SPL 2.27
GSM 02.25.11
OS 2.26.10.2
same ****
won't boot up
and if i try to format, same error.. Format Failed.. so here i am again
hmmmm,try a Hard Reset,hope it works or try other roms I have posted above.
Do you have any sdcard inserted in the phone right now,take it out before flashing any rom.
koolariz said:
won't boot up
and if i try to format, same error.. Format Failed.. so here i am again
Click to expand...
Click to collapse
dude.. that's what i've been trying hard reseting it.. and i get the same error each time i try it "Format Failed"
no sd inserted.. i took it out a while ago.. cause i read on the forum to flash without it.
i begining to get desperate over here
i'll try other roms..
what else can i do than hope this works
Also take out if any sdcard or mini sd is inserted in the phone before flashing,it also causes this Format Failed problem.
I was asked to patch USPL for ROM size checking when flashing via RUU, so this version does not check size even when flashing via USB. (original SPL skips the size checks only when SD flashing.)
I did this a few days ago, but didn't get around to posting it
download from attachment, enjoy! donations are always appreciated to the "To Cmonex" link in my signature
how to use it: if you already have a version of artemis USPL installed, simply flash this new version using RUU or from SD (ARTEIMG.NBH on FAT32 formatted SD)
in bootloader (tricolour mode) it should then say version: 1.11.cmon
for instructions on installing any USPL if you have no USPL yet - check out: http://forum.xda-developers.com/showthread.php?t=311403 until I have more time/motivation for userfriendly packaging
more plans: if I get time/motivation I might upgrade this to be full HSPL (overwrite protection)
Well done Cmonex..!
Thanks so much.
Peoples of Artemis forum wait it long times already.
Thread Sticked.
Cheers ..!
cmonex said:
.......
more plans: if I get time/motivation I might upgrade this to be full HSPL (overwrite protection)
Click to expand...
Click to collapse
Then with full HSPL, i see a lot of bricks coming to "life".
Hope u get motivated enough.
Thanks Cmonex, excelent stuff.
Thanks !
But I dont really understand. Can Flash under vista ou seven with no drivers ?
it's the same process.
The difference is that you can flash any rom without size limits.
Before you only could do this with SD Card method.
not working
its not working
it gives the same error : invalid size
canu explain step by step plzzzz
Is you bootloader showing SPL 1.11.cmon?
i have replaced the nbh file of artemis uspl with this one
then started uspl after that once it gets over i started
ruu upgrade utility
thats the way how it is done or something else
during this process no bootloader screen comes
And where is the response to my question? ....
drlalitbida said:
i have replaced the nbh file of artemis uspl with this one
then started uspl after that once it gets over i started
ruu upgrade utility
thats the way how it is done or something else
during this process no bootloader screen comes
Click to expand...
Click to collapse
you need to enter the tricolour screen to check version.
fhcoolos said:
Thanks !
But I dont really understand. Can Flash under vista ou seven with no drivers ?
Click to expand...
Click to collapse
does artemis have an issue with vista? tell me what kind of problem please
thats what i have written
no bootloader screen comes in between the upgrade process
drlalitbida said:
thats what i have written
no bootloader screen comes in between the upgrade process
Click to expand...
Click to collapse
you have to manually go to bootloader to flash the image
cmonex said:
does artemis have an issue with vista? tell me what kind of problem please
Click to expand...
Click to collapse
Usb drivers while u enter bootloader.
http://forum.xda-developers.com/showpost.php?p=1312109&postcount=118
Cheers.
I want to thank you very much for this useful work. However I couldn't try it yet Because at the end of the rom update utility application (I mean %100) it gives a error 270 udate error image file corrupted. Please check your update utility I have tried all these attempts while my phone is at the bootloader mode.
Thank you in advance
Can I just replace the RUU_USPL_signed.nbh file with the one from the "Artemis Update SPL (USPL) v.01 - Another way to flash *ANY* rom to your device" thread?
oh！thanx！it's funny！
sean777 said:
Can I just replace the RUU_USPL_signed.nbh file with the one from the "Artemis Update SPL (USPL) v.01 - Another way to flash *ANY* rom to your device" thread?
Click to expand...
Click to collapse
Yes. All other files are the same.. infact you need to because zip does not have start_uspl.exe
need urgent help........
hello everyone ....i want to upgrade my o2 orbit wm6 to wm 6.1 or any cooked rom currently i am using wm6 but the problem is my active syncro is not working is there any other to start uspl without acive syncro.....give some suggestions ...thank for ur time...
Hello!
Is there any way to load USPL from bootloader (without ActiveSync)?
Regards!