Database Users

Hard-SPL - or How to Not Brick your Phone DOWNLOAD HERE, FLASHING LIGHTS!

MOD WARNING: There are reports of this damaging phones, DO NOT USE until a fix is provided.
Further edit:
A member has reported :
"those with a SPL lower than 4.0.0.0 or something like that gets bricked. I just wanted to get this first post edited to reflect that so that people don't keep bricking their phones."
(Moderator: whether this is accurate or not I do not know - but use your own discretion)2nd Jan 2008
Hard-SPL for Herald is released!
if you somehow manage to kill your phone in the process of doing this then tough, it's not my fault.
once the SPL is on, it will protect itself from being overwritten.
the SPL is hardcoded to allow unsigned code and ignore your CID.
someone reported it somehow simunlocked their device after flashing an HTC brand ROM which is possible, but I doubt it.
When flashing, the RUU will go to 100% and your device will restart but the RUU will give an error; ignore this and close the RUU. to confirm, just reset into bootloader and check the version
PLEASE NOTE: THE DEVICE MUST BE SYNCED WITH ACTIVESYNC, DO NOT PUT THE DEVICE IN BOOTLOADER MODE MANUALLY

Olipro
Differences g4 and h3 only for IPL.
SPL one for all chip.
USPL for Herald is made but is not published while.
Ask pof.
While we prepare new version - SPL and haret in one file.
Much problems when files apart -see thread USPL for Artemis and ELF.

the device has a DoC, so you can read/write it with the appropriate pdoc tools.
any takers?

sorry mate am quite busy atm, although if there aren't any volunteers in the immediate future I am sure I could work something out with some instructions
cheers

Here's the beta version of USPL for herald, I did it a while ago but received few feedback: only 1 wing user (Paul from modaco) reported it working.
As beta, this does not flash SPL on device, to use just put the NBH you want to flash on the RUU folder and start herald-uspl.exe
Please report success or failure, remember it's beta, use at your own risk
I leave the final "Hard-SPL" version to you Olipro

pof said:
Here's the beta version of USPL for herald, I did it a while ago but received few feedback: only 1 wing user (Paul from modaco) reported it working.
As beta, this does not flash SPL on device, to use just put the NBH you want to flash on the RUU folder and start herald-uspl.exe
Please report success or failure, remember it's beta, use at your own risk
I leave the final "Hard-SPL" version to you Olipro
Click to expand...
Click to collapse
This is the method I used for installing the PDAVIET v14 Rom and have used it successfully twice with my Wing.

Olipro said:
the device has a DoC, so you can read/write it with the appropriate pdoc tools.
any takers?
Click to expand...
Click to collapse
I prefer more safe method flash - original.
The Original flash allows to avoid the many problems -a choice of the addresses, model DOC etc and more correct.
Also any developers can use uspl.nbh and select spl for use in their own ROM.
In any event you may take for base spl and use in your tools.

arc said:
I prefer more safe method flash - original.
The Original flash allows to avoid the many problems -a choice of the addresses, model DOC etc and more correct.
Also any developers can use uspl.nbh and select spl for use in their own ROM.
In any event you may take for base spl and use in your tools.
Click to expand...
Click to collapse
flashing a few hundred KB to the DOC is really not a bloody issue. and could you please explain what the sodding hell "original flash" means, since I would like to point out that the idea is to generate an SPL for the two separate DoC types.

pof said:
Here's the beta version of USPL for herald, I did it a while ago but received few feedback: only 1 wing user (Paul from modaco) reported it working.
As beta, this does not flash SPL on device, to use just put the NBH you want to flash on the RUU folder and start herald-uspl.exe
Please report success or failure, remember it's beta, use at your own risk
I leave the final "Hard-SPL" version to you Olipro
Click to expand...
Click to collapse
Thanks Pof !!!
Great tool !!!

You load corrected spl in RAM and jump to it.
Hereinafter usual flash through RUU.
Details to ask pof

arc said:
You load corrected spl in RAM and jump to it.
Hereinafter usual flash through RUU.
Details to ask pof
Click to expand...
Click to collapse
I've been speaking to pof, he put that post up for me in fact.
I looked at the file and noticed it contained haret, so I know exactly what the game is there.
I'll get an unpatched bootloader off pof and then deliver a bug-free patched SPL.

Olipro said:
I've been speaking to pof, he put that post up for me in fact.
I looked at the file and noticed it contained haret, so I know exactly what the game is there.
Click to expand...
Click to collapse
Yes .We presently have a more new program for loading and jump.

pof said:
Here's the beta version of USPL for herald, I did it a while ago but received few feedback: only 1 wing user (Paul from modaco) reported it working.
As beta, this does not flash SPL on device, to use just put the NBH you want to flash on the RUU folder and start herald-uspl.exe
Please report success or failure, remember it's beta, use at your own risk
I leave the final "Hard-SPL" version to you Olipro
Click to expand...
Click to collapse
POF,thanks to you,after I used your tool to flash my own ruu file,it really work.how successful you are.It work!!!!!
but I still have some question,
this beta still can't unbrick devices that bricked,since it have to work beyond activeSYNC,can you make it work under the bootloader.because they only can run on bootloader screen. many thanks to you.
thanks again.

arc said:
Yes .We presently have a more new program for loading and jump.
Click to expand...
Click to collapse
that's wonderful, but I need specifics

Olipro said:
that's wonderful, but I need specifics
Click to expand...
Click to collapse
I sent you spl (not patched ) .

bricked......
pof
Olipro
help with this.
I used pof's beta tool,I change wm6 to wm5,now....it brick.
last it unbrick since I only change the os.nb to ruu file.but this I change all to wm5 vision,
it only can go into bootloader.and ipl is 4.17.0002 spl is 1.09.0001!!!!!
it bricked.
I try offical ruu wm6,it doesn't work and displayed "This update utility cannot be used for your pda phone. please get newer update utility."
what can I do now?

Olipro, willing to help you if you could get me any info how to, I got the time

OK, I've created a patched ROM.
as I noted, it can be loaded with haret, so is anyone willing to test out 1.10.Olinex?

The Dutchman said:
Olipro, willing to help you if you could get me any info how to, I got the time
Click to expand...
Click to collapse
Got some time now also, just send us both pm's with some instructions and i'll test it out.
cheers

Olipro said:
OK, I've created a patched ROM.
as I noted, it can be loaded with haret, so is anyone willing to test out 1.10.Olinex?
Click to expand...
Click to collapse
Olinex GIVE me the rom,I would like to try since my herald was bricked.
[email protected] please send me one.

Upgrade Instructions!

Hi,
Just wondered if anyone could please give even some brief instructions on how to go about flashing an XDA Orbit with Artemis_Touch_4.01_Full.
I have searched but there just doesn't seem to be any step by step guide. I'm running WM6 and have a Vista based pc with the above ROM downloaded, but can't figure out how to go about flashing and don't want to brick my phone.
Any help woud be greatly appreciated!
Cheers

Ok its pretty easy enough. First u gotta make your Orbit "unlocked". This is done by flashing USPL to it (which I guess stands for "Upgraded Service Provider Lock" or something like that). This will also make it CID unlocked (which I guess stands for "Country ID" or whatever). Anyway doesnt really matter what they stand for.
Once this is done, you can now flash your ROM to your Orbit because there shouldnt be any locks in the way stopping you.
....Meschle has made these steps pretty simple in all of his ROMs.
1 - connect your Orbit to your PC and make sure it connects to ActiveSync OK
2 - if the ROM is in a .rar then extract it and run "STEP 1 - activesync then uspl cid unlocking.bat"
3 - once thats done and you have followed the instructions that appear and your Orbit has been reset (or rebooted, whatever), reconnect to PC and ActiveSync again, then run "STEP 2 - activesync then flash artemis touch rom.bat"
....and there you go, once everything is finished and your Orbit is rebooted, you now have a brand new ROM on your Orbit. This will wipe your data (much like formatting your hard drive with a new operating system) so make sure to backup. And maybe try running "STEP 2 - activesync then flash artemis touch rom.bat" two or three times, sometimes it helps.

thanks fubofo for easy instruction, i have orbit with wm5 and to unlock i use this
http://forum.xda-developers.com/showthread.php?t=311403
but how i can be sure that it is CID unlocked and USPL what is this? and how to unlock it?,
i just dont want to risk my xda as if its not cid unlocked it can be
once again thanks for your help.

wasim21k said:
thanks fubofo for easy instruction, i have orbit with wm5 and to unlock i use this
http://forum.xda-developers.com/showthread.php?t=311403
but how i can be sure that it is CID unlocked and USPL what is this? and how to unlock it?,
i just dont want to risk my xda as if its not cid unlocked it can be
once again thanks for your help.
Click to expand...
Click to collapse
I think SPL means Service Provider Lock (like O2 or Orange) or something like that. USPL is basically a patched SPL that you write to your Orbit. Just follow the instructions on that post and when your Orbit restarts, just check (at the very start, in top left corner in red font) that the SPL displays 1.11. If it does then your unlocked and ready for flashing new ROMs

thanks fubofo for your instructions,
i done that and its working perfect, just one more question, what if i want to change with some other rom can i do this?

wasim21k said:
thanks fubofo for your instructions,
i done that and its working perfect, just one more question, what if i want to change with some other rom can i do this?
Click to expand...
Click to collapse
Hey, glad everything worked out OK. Yeah, now that your USPL is 1.11 you flash whatever ROMs you like whenever you like. Trust me it gets a bit hectic at times, so many new ROMs every week or so lol.

fubofo said:
Hey, glad everything worked out OK. Yeah, now that your USPL is 1.11 you flash whatever ROMs you like whenever you like. Trust me it gets a bit hectic at times, so many new ROMs every week or so lol.
Click to expand...
Click to collapse
this only thread i seen tonight that tells you so simply how you know if yuor CID unlocked the only otherone i saw you had to run NHtool that didnt work for me anyway so thanks alot that was such a useful bit of info

LOL thanks, although there are definately alot of other posts that describe flashing ROMs

Bricked Cruise? Need Help.

Okay, so I'm an idiot. I'm completely lost now. Here's the basic facts:
Hard-SPL install was unsuccessful, but I didn't notice. So I'm still with original SPL.
I started upgrading the ROM with original SPL, which of course crashes at 3 percent.
Now I can't get back into WM. It's stuck at the 'smart mobility screen'.
So the problem is: it won't let me install any ROMs because original SPL is still on there. I can't change to hard-SPL anymore either. The ROM that's on the machine doesn't seem to work anymore. When I try to install an original ROM it says I can't use this utility. I think I need to download an official ROM + installer, but I can't find any from HTC.
Alright, so skip all the noob and idiot comments please, I already know. But where do I go from here?
Please help!

Bricked Cruise
hansdekker said:
Okay, so I'm an idiot. I'm completely lost now. Here's the basic facts:
Hard-SPL install was unsuccessful, but I didn't notice. So I'm still with original SPL.
I started upgrading the ROM with original SPL, which of course crashes at 3 percent.
Now I can't get back into WM. It's stuck at the 'smart mobility screen'.
So the problem is: it won't let me install any ROMs because original SPL is still on there. I can't change to hard-SPL anymore either. The ROM that's on the machine doesn't seem to work anymore. When I try to install an original ROM it says I can't use this utility. I think I need to download an official ROM + installer, but I can't find any from HTC.
Alright, so skip all the noob and idiot comments please, I already know. But where do I go from here?
Please help!
Click to expand...
Click to collapse
First you can try a hard reset!
Here you can download the original shipped rom with installer.
ftp://xda:[email protected]_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
kr.,
Frepke

Update
Update
Okay, so I did the hard reset as described here. No luck.
So I went back to the bootloader screen (original SPL) and tried the original rom and installer from the download link. Again, no luck. It says "Error [294] Invalid Vender ID. This utility cannot be used for your PDA phone. Please check your update utility." The phone was unlocked when I bought it, it's HTC branded. Is there another installer out there?
I've also tried loading several roms by putting them on SD, renamed as POLAIMG.nbh. (including the orginal rom, extracted from the downloaded installer). For the original Rom, it will say 'loading...', then 'checking...' and then it will tell me: "00028002 - not allow". Then it goes back to the three colour spl screen.
There's also a link here on the forum which I'm not sure is good advice.

Three colour screen info
Pola100
Spl-1.25.0000
Cpld-2

hansdekker said:
Update
Okay, so I did the hard reset as described here. No luck.
So I went back to the bootloader screen (original SPL) and tried the original rom and installer from the download link. Again, no luck. It says "Error [294] Invalid Vender ID. This utility cannot be used for your PDA phone. Please check your update utility." The phone was unlocked when I bought it, it's HTC branded. Is there another installer out there?
I've also tried loading several roms by putting them on SD, renamed as POLAIMG.nbh. (including the orginal rom, extracted from the downloaded installer). For the original Rom, it will say 'loading...', then 'checking...' and then it will tell me: "00028002 - not allow". Then it goes back to the three colour spl screen.
There's also a link here on the forum which I'm not sure is good advice.
Click to expand...
Click to collapse
Hi
Ths info I posted relates to the Kaiser (kaiser [nearly] equals Polaris in terms of hardware) and the MTTY is from the ELF forum.
"set 16 0" to tell bootloader to boot the OS after reset.
"task 8" to get your device formatted
I suggest the set 16 0 and a reset to see if that helps, I do advocate you searching for these commands and checking they are applicable.
The info was from this KAISER thread
http://forum.xda-developers.com/showthread.php?p=2103884
HTH
Leon

MTTY
Thanks for your advice guys.
I tried the "set 16 0" command + reset. Still same situation.
Any other tips anyone?

Darn
No more reponses?
It is probably bricked then.
So what's my next move...trash it?

hansdekker said:
No more reponses?
It is probably bricked then.
So what's my next move...trash it?
Click to expand...
Click to collapse
try flashing using sd card

Tupac_Shakur said:
try flashing using sd card
Click to expand...
Click to collapse
I think he wrote already that he tried to flash some ROMS using SD card... (POLAIMG.NBH). Not sure though if he tried re Hard-SPL'ing using the SD flash method...
So I would suggest to retry the HardSPL using the POLAIMG.NBH method (just as if the HardSPL's .NBH file was a normal ROM) if this hasn't been tried yet...

Hey you must careffuly read mtty in kaiser thread.....mtty can brick your device for entire life.....my advice to you is pm GSLEON3
he's the master of using mtty and lot of kaiser user saved by him...
Hope this can help you
cheers

The Facts
When I try to hard-spl through the SD-card, it just says "Loading..." and that's where it stays - Even if I leave it till the battery dies. I tried the 2.10 and 1.10 versions on this page.

Are you sure? This Hard SPL suit for Hermes. You have to use this: http://forum.xda-developers.com/showthread.php?t=375338
TB

Hard-SPL through SD
You're right; I did notice that - however
I had to take an nbh from this page. The reason is that the HTC Cruise Hard-SPL program I found on this page won't let me extract the rom.
I need the rom file to put in on SD!
The Hermes one probably wouldn't work anyway though, thats a good point Where to get the Polaris separate rom nbh? I haven't found it on the forums. Maybe I'm going blind...

How to flash your Polaris using the microSD card [Guide]
hansdekker said:
You're right; I did notice that - however
I had to take an nbh from this page. The reason is that the HTC Cruise Hard-SPL program I found on this page won't let me extract the rom.
I need the rom file to put in on SD!
The Hermes one probably wouldn't work anyway though, thats a good point Where to get the Polaris separate rom nbh? I haven't found it on the forums. Maybe I'm going blind...
Click to expand...
Click to collapse
Hi,
Try this thread :
http://forum.xda-developers.com/showthread.php?t=384084
How to flash your Polaris using the microSD card [Guide]
TB

It's starting to seem really hopeless
Thanks.
Same result. The screen just says "Loading..." and stays there.

hansdekker said:
Thanks.
Same result. The screen just says "Loading..." and stays there.
Click to expand...
Click to collapse
unplug usb and replug it

hansdekker said:
You're right; I did notice that - however
I had to take an nbh from this page. The reason is that the HTC Cruise Hard-SPL program I found on this page won't let me extract the rom.
I need the rom file to put in on SD!
The Hermes one probably wouldn't work anyway though, thats a good point Where to get the Polaris separate rom nbh? I haven't found it on the forums. Maybe I'm going blind...
Click to expand...
Click to collapse
1. You can not flash hard-spl with microSD method! (hard-spl flash use jumpspl to ignore cid-lock. But with microSD card method you will not use jumpspl, so you can not flash hard-spl! (and to use microSD method you have to have hard-spl on your pda)
2. If you unzip hard-spl on your pc will be an RUU_signed.nbh. This is the rom file, but you can not to flash it with microSD.
3. Your device is bricked, I think. Take it to repair!

after an unsuccessful flash, u shud never try to flash again, high chance of permanently bricking your pda. go contact GSLEON3, he saved my kaiser from bricking when i made the same mistake as u. helpful fellow. make sure u donate lol

Accepted Defeat
Hi
I accepted defeat and exchanged the unit.
Thanks for all the help.
H

format failed .. stuck on splash screen..

hey guys.. i need some help
i installed an app an asked me to restart the device.. i did
and now it's stuck on the splash screen
IPL 2.27
SPL 2.27
GSM 02.44.11
OS 2.27.1.1
and the orange brand wallpaper
what can i do? i tried to reset it and format it
but an error shows up
"Press Send to restore factory default,
Other keys to quit"
ok.. send it is
"Format FAT Partition
Format failed"
i can enter RGB bootloader (cam button+power), but i don't know what i can do??
ps: i just got it from a friend, i don't think my phone is cid-unlocked..
and i'm stuck at the splash screen and nothing to do
please help me.. tell me what can i do

Ouch.
Sounds like the built-in flash memory is bad. I'm not sure what you can do about that, short of replacing it.

No offense Reverend, but where did you hear that? Its just bad flash man! Simply enter the bootloader mode, and re-flash a new rom to your device. What program where you trying to install?

ashasaur said:
Its just bad flash man! Simply enter the bootloader mode, and re-flash a new rom to your device. What program where you trying to install?
Click to expand...
Click to collapse
something from a pocket freeware site.. "XDA-Team_Manilla2D.CAB"
it's a touchflo 2d app for today screen.. after installing it, the sistem wouldn't boot up anymore. so i tried to format, soft reset, to restore the system..
the formatting started and then gave an error and shut down immediately. i didn't even catch a glimps of that error 'cause it restarted.. and then the problem. it won't go past the operator splash screen
tried to reformat.. would't start.. format failure
..simply wow.. don't get me wrong , but i didn't knew there was a bootloader screen until this happened.. i dug up about this problem on the forum, but i can't solve it.. i don't know that much about flashing.. isn't the wizard supposed to be cid-unlocked to be able to flash it with a new rom?
or there's a rom that doesn't require the pda to be unlocked?.. cause' i think mine isn't. and, since i can't get it to boot up the os, i can't cid-unlock it after the tutorials i've found here..
and i don't want to bury it, yet

Oh you poor sole...that program that you tried to flash is notorious...I did the very same thing to mine just the other day. It doesnt work with the Wizard yet for some reason.
Now, onto your problem, yes-I think that your Wizard IS INDEED CID locked, and if that is the case, search for the Wizard LOVE ROM and flash it. It can be flashed with a CID unlocked device. Head into your bootloader mode, then start up the RUU flashing program on your PC that is included with the ROM. After it flashes, you can use the Wizard Service Tool, which is also availible via searching to CID and SIM unlock your device, and then you can put any ROM that you like onto it. I hope that helps somewhat!

If you can get it into bootloader mode, you can recover. If the phone is not unlocked, you will have to load the original service ROM for that phone.
You MIGHT get lucky by just flashing the IPL/SPL back though, now that I think about it...look at the "How to Remove HardSPL" thread for the most popular IPL/SPL sets. If this works, you won't have to put all of your custom settings and programs back on.

Myrddin Wyllt
Plz note all the IP/SPL posted in the thread 'How To Remove HardSPL' are for G4 devices and they are not meant to be flashed to a G3 device,if flashed will certainly 'Brick' the G3 device.
Whereas,here ,he has a G3 device with IPL/SPL 2.27,flashing those IPL/SPL (Bootloaders) means instant death of the phone.
koolariz
Simply,download the official stock rom of the carrier and flash it in Bootloader mode to recover back to its default status,than downgrade to IPL/SPL 1.xx to CID unlock the phone,how to CID unlock the phone, read and follow this guide carefully :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies

zabardast_1 said:
koolariz
Simply,download the official stock rom of the carrier and flash it in Bootloader mode to recover back to its default status
Click to expand...
Click to collapse
i can't find anywhere the original one.. my wizard is in orange.ro carrier [orange spv m3000].. i tried on varios romanian discussion site's but only found radio rom's i'll keep searching...
any ideea what other kind might work with cid-locked?
i found this one on xda ftp:
Orange_SPV_M3000-FRA
Orange SPV M3000 ROM update 2.18.1.3
on ftp://[email protected]/Wizard/Roms/Orange/

If it is truth....
koolariz said:
i can't find anywhere the original one.. my wizard is in orange.ro carrier [orange spv m3000].. i tried on varios romanian discussion site's but only found radio rom's i'll keep searching...
any ideea what other kind might work with cid-locked?
i found this one on xda ftp:
Orange_SPV_M3000-FRA
Orange SPV M3000 ROM update 2.18.1.3
on ftp://[email protected]/Wizard/Roms/Orange/
Click to expand...
Click to collapse
If you have said the truth... you've got a G3 device cause your ipl spl are 2.27.
So try to install this original ROM... is for Tmobile WWE so try it.... http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html
Or search on tutorials tu unlock and upgrade the wizard Love ok?
Good luck men...
And please please please read and ask before do anything, BTW now the only you can do is to runn this ROMs cause you cant get your original carriers ROM.
If this dont works... please read the thread from upgrading forum in this wizard subforum that said something like Stuck on splash screen solution DYI or something the tuttorial DEV is called Drug_store.

zabardast_1 said:
Myrddin Wyllt
Plz note all the IP/SPL posted in the thread 'How To Remove HardSPL' are for G4 devices and they are not meant to be flashed to a G3 device,if flashed will certainly 'Brick' the G3 device.
Whereas,here ,he has a G3 device with IPL/SPL 2.27,flashing those IPL/SPL (Bootloaders) means instant death of the phone.
Click to expand...
Click to collapse
Good catch. Sorry about that!

Myrddin Wyllt said:
Good catch. Sorry about that!
Click to expand...
Click to collapse
Nah! buddy,you are doing fine,its just we sometime overlook the post,it happens to all of us,so no harm done !

koolariz said:
i can't find anywhere the original one.. my wizard is in orange.ro carrier [orange spv m3000].. i tried on varios romanian discussion site's but only found radio rom's i'll keep searching...
any ideea what other kind might work with cid-locked?
i found this one on xda ftp:
Orange_SPV_M3000-FRA
Orange SPV M3000 ROM update 2.18.1.3
on ftp://[email protected]/Wizard/Roms/Orange/
Click to expand...
Click to collapse
YES ! you can try this rom or download the WWE (English) version of Orange SPV M3000 Official WM5 Rom from here :
http://www.megaupload.com/?d=5OZEILXK

zabardast_1 said:
YES ! you can try this rom or download the WWE (English) version of Orange SPV M3000 Official WM5 Rom from here :
http://www.megaupload.com/?d=5OZEILXK
Click to expand...
Click to collapse
10x a lot.. i hope it won't die on me..
LE:
i tried the O2 rom [12.18.3.103] u gave me. it doesn't start flashing.. 0% and then
quoting:ERROR "This NBF file cannot be used for your PDA phone. Please get newer NBF file."
ps: The orange one on the xda ftp server doesn't work .. it's archived and parts are missing..

Hmmm,ok,lets try this out,download 'Button's Rom 1.05' from the link posted below and check if this works out.
Otherwise,you'll have to look for official Stock Rom (Romanian),which was running on the phone before.
http://wiki.xda-developers.com/index...0for newbies

i'll try this one.. for now.. ps:your link is broken?
i just have another question.. i have a friend with the same wizard as mine, i mean in the same carrier.. is it possible cu get his rom? to dump it on SD card.. or something?
so that i may flash that rom?
LE:
i found another thing on a DIY
If you got IPL/SPL 1.xx go to G3.3. If you got 2.xx go to G3.4
G3.3 Download button rom and flash it to your device. Your device should startup again after doing this. Go to G3.5.
G3.4 Download wizard_love rom and flash it to your device. Your device should startup again after doing this. Go to G3.5.
Click to expand...
Click to collapse
should i try the wizard_love rom?

ok,download Button's Rom 1.05 from here:-
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
also try this one :-
xda_miniS_LaunchRom
http://rapidshare.com/files/43423464/Xda_MiniS_LaunchROM_v154102.exe
and yes! you can also try Wizard_Love _Rom.
Now,its possible to back up the rom from your friend's phone,but it also have to be CID unlocked first and your device shud also be CID unlocked to flash it from the sdcard (MTTY) method.

pfff (
i've updated the rom with the Wizard_Love_2.26.10.2_WWE_Novii_CF2 and now i have a blue sci-fi splash screen with "AKU 2.3" in the top-right corner..
IPL 2.27
SPL 2.27
GSM 02.25.11
OS 2.26.10.2
same ****
won't boot up
and if i try to format, same error.. Format Failed.. so here i am again

hmmmm,try a Hard Reset,hope it works or try other roms I have posted above.
Do you have any sdcard inserted in the phone right now,take it out before flashing any rom.

koolariz said:
won't boot up
and if i try to format, same error.. Format Failed.. so here i am again
Click to expand...
Click to collapse
dude.. that's what i've been trying hard reseting it.. and i get the same error each time i try it "Format Failed"
no sd inserted.. i took it out a while ago.. cause i read on the forum to flash without it.
i begining to get desperate over here
i'll try other roms..
what else can i do than hope this works

Also take out if any sdcard or mini sd is inserted in the phone before flashing,it also causes this Format Failed problem.

Help!! Uninstall HARDSPL goes wrong.

Hello!
Like the title says: HARDSPL goes wrong.
I need to uninstall hardspl so i can use my warranty.
I have follow the tutorial in this thread how to uninstall it http://forum.xda-developers.com/showthread.php?t=611433
When the flash is compleated and its time for reboot i got this message http://www.youtube.com/watch?v=hWWpBbQTPb8
If i take out the memorycard and reboot i got this message http://www.youtube.com/watch?v=O4S-Rcqwlsc
If i try to reflash i getting the same message as the firs plus it says "upgrade ROM code error please try agen"
Can some one please help me out with this?
And yes i have done a hard reset.
And yes i have try to boot via usb to reflash.
If its to any help i used a ROM from this thread http://forum.xda-developers.com/showthread.php?t=577717 tha one called "LEO2.07"

I think you have to find official ROM which was installed on you HD2 before you changed HARDSPL and installed cooked ROM. You'll find all official ROM's in Leo Official ROMs thread. When you find the right one install it from your SD card. Hope this helps

mitja12 said:
I think you have to find official ROM which was installed on you HD2 before you changed HARDSPL and installed cooked ROM. You'll find all official ROM's in Leo Official ROMs thread. When you find the right one install it from your SD card. Hope this helps
Click to expand...
Click to collapse
Like I said. I have used a rom from official rom thread=) I also tryed the rom from htc.com with same resoult.
Can I uninstall a bad flash or something and start from the beginning ? Cuz now im stockt in my situation.

Like I said you have to find the "right" one. It's not just any official ROM. I my case I had to install some really old ROM. Unfortunately I don't know how to find the right one, just use the trial and error method.

mitja12 said:
Like I said you have to find the "right" one. It's not just any official ROM. I my case I had to install some really old ROM. Unfortunately I don't know how to find the right one, just use the trial and error method.
Click to expand...
Click to collapse
Okej! Sorry for missunderstanding. So the only way out is to try everyone ?
I was lucky to get the first released hd2 in my city, so i bett its a old one =)
Does it have to be the same language release to ?

In official ROMs thread is link to Shared folder for shipped Leo ROMs. In there are very well organised ROMs by country and carrier, you should find it quick enough. Just start with 1.43 and 1.48 and only those which matches your country and/or carrier.

or just to HTCs website and get it from there (assuming its not a vendor locked device)

mitja12 said:
In official ROMs thread is link to Shared folder for shipped Leo ROMs. In there are very well organised ROMs by country and carrier, you should find it quick enough. Just start with 1.43 and 1.48 and only those which matches your country and/or carrier.
Click to expand...
Click to collapse
I have trayd every rom that compatibility with my region "SVE" and its not working. I still get the message "upgrade rom code error please try agen". In the 1.43 i cant find my region, does that meens that is it impossible that i could have been that release of rom ?
Does sombody knows if there any way to cheack the stock ROM from a serialnumber or somthning like that?

lovenvik said:
I have trayd every rom that compatibility with my region "SVE" and its not working. I still get the message "upgrade rom code error please try agen". In the 1.43 i cant find my region, does that meens that is it impossible that i could have been that release of rom ?
Does sombody knows if there any way to cheack the stock ROM from a serialnumber or somthning like that?
Click to expand...
Click to collapse
Thinks getting better!
I find a new SD card, so i use this insted of the stock SD card.
No a white screen with a blue "Loading..." text appers.
BUT. its always a BUT. In this screen the phone freeze.

lovenvik said:
Thinks getting better!
I find a new SD card, so i use this insted of the stock SD card.
No a white screen with a blue "Loading..." text appers.
BUT. its always a BUT. In this screen the phone freeze.
Click to expand...
Click to collapse
does it freeze on the HTC splash screen?

djchubbs said:
does it freeze on the HTC splash screen?
Click to expand...
Click to collapse
Dont realy know what that its. But I press vol down and start bottom. Then the tri-colored screen shows up "bootloader" for about 1 second. Then i got this screen http://img405.imageshack.us/i/20090607028.jpg/
I have let it load for about 20min, then i gave up.

I'm afraid to say this, but you have SPL 2.07, which means you are on 'official SPL' and can only flash TMOS Official ROM (since the only SPL 2.07 is tied to US ROM)
I think the only way is to use goldcard, to flash your country's official ROM via sdcard (although I'm not sure if that will work, because I read some folks have problem with that)

Its seems i also have a problem flashing a stock rom for warranty reasons.
I did the following steps:
1. Get an official stock rom. (in my case it would me a NLD ROm 1.48)
2. Put it on storage card en change to LEOIMG.nbh
3. Turn of phone, press volume down en power up unntil tri color screen apears.
4. Follow steps on sreen.
But. I dont get step 4. On step it says for 1 sec ''loading''. After that, it goes back to the trii colour HARDSPL screen.
Does anyone know what im doing wrong?
I tried two different SD cards. A 2 gb version and a 4 gb version (both from Scandisk formatted as FAT32)
Is there a way/possible to flash a stock rom using activesync?

zenkinz said:
I'm afraid to say this, but you have SPL 2.07, which means you are on 'official SPL' and can only flash TMOS Official ROM (since the only SPL 2.07 is tied to US ROM)
I think the only way is to use goldcard, to flash your country's official ROM via sdcard (although I'm not sure if that will work, because I read some folks have problem with that)
Click to expand...
Click to collapse
Okej :O. Im not 100% sure what you meen, but is my warranty valid then?
Im gona send my hd2 in to htc cuz my display is broke. So i perhaps get a new phone. So the only thing im intrested in is to get my warranty valid.

lovenvik said:
Okej :O. Im not 100% sure what you meen, but is my warranty valid then?
Im gona send my hd2 in to htc cuz my display is broke. So i perhaps get a new phone. So the only thing im intrested in is to get my warranty valid.
Click to expand...
Click to collapse
hehe thats the same reason i want to sent my phone back.. its probably cost 213,- euro for me

You flashed it using the SD card method?
People with the same problem in this thread:
http://forum.xda-developers.com/showthread.php?t=630843
In post #64 fards helped XMOO get the device working again, only with SPL 2.07... maybe the rest of the thread provides more info or solutions. I didn't read any further.

lovenvik said:
Hello!
Like the title says: HARDSPL goes wrong.
I need to uninstall hardspl so i can use my warranty.
I have follow the tutorial in this thread how to uninstall it http://forum.xda-developers.com/showthread.php?t=611433
When the flash is compleated and its time for reboot i got this message http://www.youtube.com/watch?v=hWWpBbQTPb8
If i take out the memorycard and reboot i got this message http://www.youtube.com/watch?v=O4S-Rcqwlsc
If i try to reflash i getting the same message as the firs plus it says "upgrade ROM code error please try agen"
Can some one please help me out with this?
And yes i have done a hard reset.
And yes i have try to boot via usb to reflash.
If its to any help i used a ROM from this thread http://forum.xda-developers.com/showthread.php?t=577717 tha one called "LEO2.07"
Click to expand...
Click to collapse
why dont you try out from this thread ,it has videos to how uninstall hspl
http://forum.xda-developers.com/showthread.php?t=621930

lovenvik said:
Okej :O. Im not 100% sure what you meen, but is my warranty valid then?
Im gona send my hd2 in to htc cuz my display is broke. So i perhaps get a new phone. So the only thing im intrested in is to get my warranty valid.
Click to expand...
Click to collapse
No, your warranty is invalid as you're using an SPL/ROM not for your region - hence why you shouldn't flash a ROM from the SD card as this is the issue you have. You're now stuck with a broken HD2 until HSPL can be used on SPL 2.x

EddyOS said:
No, your warranty is invalid as you're using an SPL/ROM not for your region - hence why you shouldn't flash a ROM from the SD card as this is the issue you have. You're now stuck with a broken HD2 until HSPL can be used on SPL 2.x
Click to expand...
Click to collapse
Okej. Thats not good Hope some one release a HSPL 2.xx then =) But now i can't even use my phone anymore.

(just to double check)when you boot to bootloader, what does it say next to spl?
if it says spl 2.x then the above posts are correct, and you are stuck with spl2 until hspl2 is released.
You CAN get your phone working again, even with spl 2.
You need a goldcard, and you can then flash the 2.x official rom which will at least get your phone working. Once it is working, you can then flash custom roms using sspl BUT ONLY roms based on the 2.x official rom, and you won't be able to change radios using sspl. The only way you can change your radio is flashing a 2.x official rom with the goldcard.