Database Users

Please help me and my MDA!!!!!

I was updating my MDA to WM6 when my computer froze in the middle of updating, so i unhooked the MDA and resset it, now its stuck on the splash screen!!!! no matter what I do! and activesync will not recogizine it also!! ive tried hard reset be all its saying issomething about a FAT partition, it can still go into bootloader mode so i know its not bricked, its a G3 model...SOmeone PLEASE help!!!!!

Nolimit1211 said:
I was updating my MDA to WM6 when my computer froze in the middle of updating, so i unhooked the MDA and resset it, now its stuck on the splash screen!!!! no matter what I do! and activesync will not recogizine it also!! ive tried hard reset be all its saying issomething about a FAT partition, it can still go into bootloader mode so i know its not bricked, its a G3 model...SOmeone PLEASE help!!!!!
Click to expand...
Click to collapse
Read the wiki for wizard, I am sure God will help u if u help urself. I think it can be restored by going into the bootloader.

NEww problem
Thanks, did some reading and solved it, but than i wanted a new rom and when i installed it I started and it stuck at splashscreen again, only now hard reset fails and now matter what original tmobile rom i flash it to its still stuck!!! Please help!

Nolimit1211 said:
Thanks, did some reading and solved it, but than i wanted a new rom and when i installed it I started and it stuck at splashscreen again, only now hard reset fails and now matter what original tmobile rom i flash it to its still stuck!!! Please help!
Click to expand...
Click to collapse
What steps have you taken, and where are you stuck at now? Can you bring it into bootloader mode? What IPL/SPL? You said its G3, is it CID unlocked?

So far i have flashed it with the original Tmobile rom and some others through the bootloader mode, but even after it says flash completed I still get stuck on the splash screen, my ip/spl are both 2.26, and it is CID locked, and at the time i dont had a mini sd card to perform an sd rom upgrade, god i wish i just stuck with my original rom, please help!

Nolimit1211 said:
So far i have flashed it with the original Tmobile rom and some others through the bootloader mode, but even after it says flash completed I still get stuck on the splash screen, my ip/spl are both 2.26, and it is CID locked, and at the time i dont had a mini sd card to perform an sd rom upgrade, god i wish i just stuck with my original rom, please help!
Click to expand...
Click to collapse
So you've flashed back the oroginal tmobile rom, is that also 2.26? I presume you are using the standard update util for the flash and it says completed? I've seen the update util do that (say 100% complete but not actually update anything) .. this behaviour is documented somewhere in this forum (took me about 8 flashes and a lot of confusion and frustration before I found the forum threads!) this only happened on a CID locked phone flashing a custom rom.. i don't think that happens with original vendor roms..
Can't say I have had the same problem. From looking at the forum, most people who get stuck like this can flash the wizard love rom and get back on. For me, I have mostly been able to get back to the original rom when needed, except when I bricked my G4 phone (before G3/G4 was well understood)...

Yes sir that is also a 2.26 and yes im using the standerd methodhat is this wiazrd love rom your talking about though? Maybe i should flash it to that instead of the original tmobile rom?

p.s if this only happens on cid locked phones, is there anyway to unlock my cid while in bootloader mode?

Nolimit1211 said:
Yes sir that is also a 2.26 and yes im using the standerd methodhat is this wiazrd love rom your talking about though? Maybe i should flash it to that instead of the original tmobile rom?
Click to expand...
Click to collapse
Like I said I had not used it myself, but there are many references to it in the forums.
When you say you are stuck, does it load the Windows splash screen or does it get stuck on the IPL/SPL screen?

It gets stuck on the IPL/SPL screen

Nolimit1211 said:
p.s if this only happens on cid locked phones, is there anyway to unlock my cid while in bootloader mode?
Click to expand...
Click to collapse
No you can't CID unlock in bootloader mode.. there are a number of threads on how to CID unlock...

Thanks for you assisting me sooo much, im going to try and flash with the love rom, do you have any other tips?

Nolimit1211 said:
Thanks for you assisting me sooo much, im going to try and flash with the love rom, do you have any other tips?
Click to expand...
Click to collapse
Only that by all accounts, you should be able to get a working phone again if you can get into bootloader mode.. unless you have hardware issues. The other item that may be of problem is the extended rom which can get corrupted.
Sorry I couldn't be of more help. Good luck.

Can anyone else please help, youll be a god to me if you can help me get my MDA up and running again!!!!

HELP NEEDED Please - 8525 brick!

hello, i have read and read all the wiki's, but ive not been able to fix my phone.
i use a cingular 8525 (herm100) phone, and cannot install any rom on the phone. I have two versions of the At&t ROM with radio's and tried them both, but they all stop at 11-12 %.
i have tried usind the sd-card method, and it does not pass the "GSM - " portion.
i guess the radio is not working or is corrupt or something..
my phone is now in bootloader and just says
HERM100
IPL-1.04
HERM100
SPL-2.03
please any help will be appreciated. thank you!!!!

wow.. can anyone even say "sorry"
geez.. 35 views, and not even one reply, or consolation message, or anything??

I would update your copy of Windows Mobile Device Center first (especially if you're using Vista). Flash SPL and the radio, then flash any rom to see what happens. I mean really at this point, it's already a brick... try some crazy stuff, you can't hurt it anymore than it already is. I did the same thing to mine a couple of months ago, and after trying these things, I got it working again without a problem.

update to hard spl ver.7.
try to flash
a). stock rom (sometimes this works)
b). radio only rom.
Also make sure you unlock your phone with this : http://forum.xda-developers.com/showthread.php?t=293665
Hope this helps...

ultramag69 said:
update to hard spl ver.7.
try to flash
a). stock rom (sometimes this works)
b). radio only rom.
Also make sure you unlock your phone with this : http://forum.xda-developers.com/showthread.php?t=293665
Hope this helps...
Click to expand...
Click to collapse
Just to make sure I understand, the unlocker you linked is to SIM and CID unlock, correct ?? And then on top of that - you should update to HardSpl also ??
I have an 8525 on its way that I will be looking to upgrade - just want to make sure I am understanding correctly.

roomtek*8525 said:
geez.. 35 views, and not even one reply, or consolation message, or anything??
Click to expand...
Click to collapse
sorry for the late reply
i have been dealing with this for 3 days and finally managed to run official AT&T rom for 4 days wout hard reset.
there is a method dumping an official himalaya rom to hermes. az pof explained in one of his posts all commands except radio commands are different in himalaya so it is safe to use dumping method.
it basically deletes everything in radio rom so you can install official rom.
PS: at first install official rom stucked %12 i said damn but in second try %15 third try success
i am at work now i dont have the link of method but try googling or searching my posts (not too much )
i hope it solves your problem
bartan

thanks guys, i've tried some things
i have tried using Hard SPL v.7 it does not work.
i have tried using official cingular roms too. stops at 11% no success.
i have tried upgraing radio only, stops a 0% and restarts the device.
i have also used mtty, with some text inputs, no success
i have even tried selling the brick on e-bay .... as you can guess no success.!

bill_in_mtl, sorry bout lateness of my reply ( net problems), yes you do unlock sim and cid. Sim unlock means you can use ANY simcard from any carrier and Cid unlock means you can flash ANY hermes rom (both official or cooked). It needs to be unlocked first as the spl is downgraded to 1.40 (I think) and you should REALLY be running with 2.10 olipro (hard SPL ver 7). I wouldnt bother upgrading to Hard SPL ver 9 a this is essentially only ver 7 with some neat features for developers but it does throw up an error message when you finish flashing a rom(no problems t just feels like it).
Hard SPL WON'T stop you from bricking your phone BUT it will make it easier to recover.
roomtek*8525, sorry to hear that but have you tried flashing with a cooked rom? This unfortunately wont fix the phone part but you will have a working PDA...If you've tried MTTY with info 8 and task 2a commands then thats the best to hope for, Sorry bout that..

Bricked Cruise? Need Help.

Okay, so I'm an idiot. I'm completely lost now. Here's the basic facts:
Hard-SPL install was unsuccessful, but I didn't notice. So I'm still with original SPL.
I started upgrading the ROM with original SPL, which of course crashes at 3 percent.
Now I can't get back into WM. It's stuck at the 'smart mobility screen'.
So the problem is: it won't let me install any ROMs because original SPL is still on there. I can't change to hard-SPL anymore either. The ROM that's on the machine doesn't seem to work anymore. When I try to install an original ROM it says I can't use this utility. I think I need to download an official ROM + installer, but I can't find any from HTC.
Alright, so skip all the noob and idiot comments please, I already know. But where do I go from here?
Please help!

Bricked Cruise
hansdekker said:
Okay, so I'm an idiot. I'm completely lost now. Here's the basic facts:
Hard-SPL install was unsuccessful, but I didn't notice. So I'm still with original SPL.
I started upgrading the ROM with original SPL, which of course crashes at 3 percent.
Now I can't get back into WM. It's stuck at the 'smart mobility screen'.
So the problem is: it won't let me install any ROMs because original SPL is still on there. I can't change to hard-SPL anymore either. The ROM that's on the machine doesn't seem to work anymore. When I try to install an original ROM it says I can't use this utility. I think I need to download an official ROM + installer, but I can't find any from HTC.
Alright, so skip all the noob and idiot comments please, I already know. But where do I go from here?
Please help!
Click to expand...
Click to collapse
First you can try a hard reset!
Here you can download the original shipped rom with installer.
ftp://xda:[email protected]_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
kr.,
Frepke

Update
Update
Okay, so I did the hard reset as described here. No luck.
So I went back to the bootloader screen (original SPL) and tried the original rom and installer from the download link. Again, no luck. It says "Error [294] Invalid Vender ID. This utility cannot be used for your PDA phone. Please check your update utility." The phone was unlocked when I bought it, it's HTC branded. Is there another installer out there?
I've also tried loading several roms by putting them on SD, renamed as POLAIMG.nbh. (including the orginal rom, extracted from the downloaded installer). For the original Rom, it will say 'loading...', then 'checking...' and then it will tell me: "00028002 - not allow". Then it goes back to the three colour spl screen.
There's also a link here on the forum which I'm not sure is good advice.

Three colour screen info
Pola100
Spl-1.25.0000
Cpld-2

hansdekker said:
Update
Okay, so I did the hard reset as described here. No luck.
So I went back to the bootloader screen (original SPL) and tried the original rom and installer from the download link. Again, no luck. It says "Error [294] Invalid Vender ID. This utility cannot be used for your PDA phone. Please check your update utility." The phone was unlocked when I bought it, it's HTC branded. Is there another installer out there?
I've also tried loading several roms by putting them on SD, renamed as POLAIMG.nbh. (including the orginal rom, extracted from the downloaded installer). For the original Rom, it will say 'loading...', then 'checking...' and then it will tell me: "00028002 - not allow". Then it goes back to the three colour spl screen.
There's also a link here on the forum which I'm not sure is good advice.
Click to expand...
Click to collapse
Hi
Ths info I posted relates to the Kaiser (kaiser [nearly] equals Polaris in terms of hardware) and the MTTY is from the ELF forum.
"set 16 0" to tell bootloader to boot the OS after reset.
"task 8" to get your device formatted
I suggest the set 16 0 and a reset to see if that helps, I do advocate you searching for these commands and checking they are applicable.
The info was from this KAISER thread
http://forum.xda-developers.com/showthread.php?p=2103884
HTH
Leon

MTTY
Thanks for your advice guys.
I tried the "set 16 0" command + reset. Still same situation.
Any other tips anyone?

Darn
No more reponses?
It is probably bricked then.
So what's my next move...trash it?

hansdekker said:
No more reponses?
It is probably bricked then.
So what's my next move...trash it?
Click to expand...
Click to collapse
try flashing using sd card

Tupac_Shakur said:
try flashing using sd card
Click to expand...
Click to collapse
I think he wrote already that he tried to flash some ROMS using SD card... (POLAIMG.NBH). Not sure though if he tried re Hard-SPL'ing using the SD flash method...
So I would suggest to retry the HardSPL using the POLAIMG.NBH method (just as if the HardSPL's .NBH file was a normal ROM) if this hasn't been tried yet...

Hey you must careffuly read mtty in kaiser thread.....mtty can brick your device for entire life.....my advice to you is pm GSLEON3
he's the master of using mtty and lot of kaiser user saved by him...
Hope this can help you
cheers

The Facts
When I try to hard-spl through the SD-card, it just says "Loading..." and that's where it stays - Even if I leave it till the battery dies. I tried the 2.10 and 1.10 versions on this page.

Are you sure? This Hard SPL suit for Hermes. You have to use this: http://forum.xda-developers.com/showthread.php?t=375338
TB

Hard-SPL through SD
You're right; I did notice that - however
I had to take an nbh from this page. The reason is that the HTC Cruise Hard-SPL program I found on this page won't let me extract the rom.
I need the rom file to put in on SD!
The Hermes one probably wouldn't work anyway though, thats a good point Where to get the Polaris separate rom nbh? I haven't found it on the forums. Maybe I'm going blind...

How to flash your Polaris using the microSD card [Guide]
hansdekker said:
You're right; I did notice that - however
I had to take an nbh from this page. The reason is that the HTC Cruise Hard-SPL program I found on this page won't let me extract the rom.
I need the rom file to put in on SD!
The Hermes one probably wouldn't work anyway though, thats a good point Where to get the Polaris separate rom nbh? I haven't found it on the forums. Maybe I'm going blind...
Click to expand...
Click to collapse
Hi,
Try this thread :
http://forum.xda-developers.com/showthread.php?t=384084
How to flash your Polaris using the microSD card [Guide]
TB

It's starting to seem really hopeless
Thanks.
Same result. The screen just says "Loading..." and stays there.

hansdekker said:
Thanks.
Same result. The screen just says "Loading..." and stays there.
Click to expand...
Click to collapse
unplug usb and replug it

hansdekker said:
You're right; I did notice that - however
I had to take an nbh from this page. The reason is that the HTC Cruise Hard-SPL program I found on this page won't let me extract the rom.
I need the rom file to put in on SD!
The Hermes one probably wouldn't work anyway though, thats a good point Where to get the Polaris separate rom nbh? I haven't found it on the forums. Maybe I'm going blind...
Click to expand...
Click to collapse
1. You can not flash hard-spl with microSD method! (hard-spl flash use jumpspl to ignore cid-lock. But with microSD card method you will not use jumpspl, so you can not flash hard-spl! (and to use microSD method you have to have hard-spl on your pda)
2. If you unzip hard-spl on your pc will be an RUU_signed.nbh. This is the rom file, but you can not to flash it with microSD.
3. Your device is bricked, I think. Take it to repair!

after an unsuccessful flash, u shud never try to flash again, high chance of permanently bricking your pda. go contact GSLEON3, he saved my kaiser from bricking when i made the same mistake as u. helpful fellow. make sure u donate lol

Accepted Defeat
Hi
I accepted defeat and exchanged the unit.
Thanks for all the help.
H

Can't flash from SD, ship ROM from BL - err. 240 or 270

Hi,
Artemis (not branded, CID locked), boots only to BootLoader.
Flashing official ROMs (either old or new one) from BL ends at 3% with errors #270 or #244.
Tried flashing _official_ ROMs from mSD card (2GB Sandisk, FAT32 formatted, ARTEIMG.nbh renamed, in root of the card) - "Checking SD contents" and straight to tri-color BL screen.
BL screen shows :
IPL 1.12.0001
SPL1.12.0000
Can connect with mtty, but I don't know what to do with it
Any help/ideas much appreciated, thanks.
t.

hey
maybe the rom you are trying to is not the one for it
try to get one from the the htc site it self
cuz you need to flash the rom with the original carrier and language as i think
and since you can inter to the boot loader maybe you can run the USPL
just an idea

trudny said:
Hi,
Artemis (not branded, CID locked), boots only to BootLoader.
Flashing official ROMs (either old or new one) from BL ends at 3% with errors #270 or #244.
Tried flashing _official_ ROMs from mSD card (2GB Sandisk, FAT32 formatted, ARTEIMG.nbh renamed, in root of the card) - "Checking SD contents" and straight to tri-color BL screen.
BL screen shows :
IPL 1.12.0001
SPL1.12.0000
Can connect with mtty, but I don't know what to do with it
Any help/ideas much appreciated, thanks.
t.
Click to expand...
Click to collapse
CID unlock first...
Your SPL must be 1.11.0000 for you to flash any ROM you like.
See here: http://forum.xda-developers.com/showthread.php?t=311403
Cheers

CID unlock first...
Click to expand...
Click to collapse
It boots ONLY to BL, doesn't start normally, so I can't USPL/CID unlock it (would need ActiveSync connection for this, unless there's some other method).
That's why I try to load an official, signed rom (from HTC site) - but for some reason Artemis does not like it, neither from card, neither from BL, even though it is the official "unlocked" ROM.
t.

But you said that your Artemis is not official, so that's a problem.
Being a official ROM doesn't mean that you can flash it in all Artemis.
For example, if the language is different, then it can't be flashed either.

By "not branded" I meant it's plain HTC, not Orange, O2 or other operator.
That's the problem - a HTC unit does not accept HTC ROM (but used to, without problems).
t.

Did u find a solution to this? i have the same isue

>Did u find a solution to this? i have the same isue
Nope. Spent several evenings searching for a hint, found nothing.
I hope somebody will find and share a way to unbrick it, but since Artemis is quite an old piece, and the gurus are busy with newer toys, I guess we need plenty of luck
imei-check.co.uk was mentioned few times, that they can provide rebuilt boot-data (?) to be flashed but there're no info about it on their www.
It seems that software version information is broken/lost in the device, so ANY attempt to flash ANY software into it will result in some kind of "wrong version" error.
br

I dropped the ROM on SD
Try that..and be patient..you should see upload status that way. I waited 30 minutes at the RGB Screen before rebooting. Also..make sure you unlock your phone 1st.

there is hundereds of %2 %3 cut off flashing artemis on earth. No solution even mtty and goldcard.

Worked???
Did it worked anyway? I have same issue..So Im just wondering if I have brick or I have to triyed to fix it

just flash it
i think u just flash it with the original rom.
this for dopod M700 official rom.
http://www.4shared.com/file/1337563...Ngsm411330_026990_Cmp_Ship_R.html?err=no-sess
what type of artemis do u have?
just go to the official web.
www.htc.com
but u need to insert SN number to download it.
just run the exe file to upgrade.

Help!! Uninstall HARDSPL goes wrong.

Hello!
Like the title says: HARDSPL goes wrong.
I need to uninstall hardspl so i can use my warranty.
I have follow the tutorial in this thread how to uninstall it http://forum.xda-developers.com/showthread.php?t=611433
When the flash is compleated and its time for reboot i got this message http://www.youtube.com/watch?v=hWWpBbQTPb8
If i take out the memorycard and reboot i got this message http://www.youtube.com/watch?v=O4S-Rcqwlsc
If i try to reflash i getting the same message as the firs plus it says "upgrade ROM code error please try agen"
Can some one please help me out with this?
And yes i have done a hard reset.
And yes i have try to boot via usb to reflash.
If its to any help i used a ROM from this thread http://forum.xda-developers.com/showthread.php?t=577717 tha one called "LEO2.07"

I think you have to find official ROM which was installed on you HD2 before you changed HARDSPL and installed cooked ROM. You'll find all official ROM's in Leo Official ROMs thread. When you find the right one install it from your SD card. Hope this helps

mitja12 said:
I think you have to find official ROM which was installed on you HD2 before you changed HARDSPL and installed cooked ROM. You'll find all official ROM's in Leo Official ROMs thread. When you find the right one install it from your SD card. Hope this helps
Click to expand...
Click to collapse
Like I said. I have used a rom from official rom thread=) I also tryed the rom from htc.com with same resoult.
Can I uninstall a bad flash or something and start from the beginning ? Cuz now im stockt in my situation.

Like I said you have to find the "right" one. It's not just any official ROM. I my case I had to install some really old ROM. Unfortunately I don't know how to find the right one, just use the trial and error method.

mitja12 said:
Like I said you have to find the "right" one. It's not just any official ROM. I my case I had to install some really old ROM. Unfortunately I don't know how to find the right one, just use the trial and error method.
Click to expand...
Click to collapse
Okej! Sorry for missunderstanding. So the only way out is to try everyone ?
I was lucky to get the first released hd2 in my city, so i bett its a old one =)
Does it have to be the same language release to ?

In official ROMs thread is link to Shared folder for shipped Leo ROMs. In there are very well organised ROMs by country and carrier, you should find it quick enough. Just start with 1.43 and 1.48 and only those which matches your country and/or carrier.

or just to HTCs website and get it from there (assuming its not a vendor locked device)

mitja12 said:
In official ROMs thread is link to Shared folder for shipped Leo ROMs. In there are very well organised ROMs by country and carrier, you should find it quick enough. Just start with 1.43 and 1.48 and only those which matches your country and/or carrier.
Click to expand...
Click to collapse
I have trayd every rom that compatibility with my region "SVE" and its not working. I still get the message "upgrade rom code error please try agen". In the 1.43 i cant find my region, does that meens that is it impossible that i could have been that release of rom ?
Does sombody knows if there any way to cheack the stock ROM from a serialnumber or somthning like that?

lovenvik said:
I have trayd every rom that compatibility with my region "SVE" and its not working. I still get the message "upgrade rom code error please try agen". In the 1.43 i cant find my region, does that meens that is it impossible that i could have been that release of rom ?
Does sombody knows if there any way to cheack the stock ROM from a serialnumber or somthning like that?
Click to expand...
Click to collapse
Thinks getting better!
I find a new SD card, so i use this insted of the stock SD card.
No a white screen with a blue "Loading..." text appers.
BUT. its always a BUT. In this screen the phone freeze.

lovenvik said:
Thinks getting better!
I find a new SD card, so i use this insted of the stock SD card.
No a white screen with a blue "Loading..." text appers.
BUT. its always a BUT. In this screen the phone freeze.
Click to expand...
Click to collapse
does it freeze on the HTC splash screen?

djchubbs said:
does it freeze on the HTC splash screen?
Click to expand...
Click to collapse
Dont realy know what that its. But I press vol down and start bottom. Then the tri-colored screen shows up "bootloader" for about 1 second. Then i got this screen http://img405.imageshack.us/i/20090607028.jpg/
I have let it load for about 20min, then i gave up.

I'm afraid to say this, but you have SPL 2.07, which means you are on 'official SPL' and can only flash TMOS Official ROM (since the only SPL 2.07 is tied to US ROM)
I think the only way is to use goldcard, to flash your country's official ROM via sdcard (although I'm not sure if that will work, because I read some folks have problem with that)

Its seems i also have a problem flashing a stock rom for warranty reasons.
I did the following steps:
1. Get an official stock rom. (in my case it would me a NLD ROm 1.48)
2. Put it on storage card en change to LEOIMG.nbh
3. Turn of phone, press volume down en power up unntil tri color screen apears.
4. Follow steps on sreen.
But. I dont get step 4. On step it says for 1 sec ''loading''. After that, it goes back to the trii colour HARDSPL screen.
Does anyone know what im doing wrong?
I tried two different SD cards. A 2 gb version and a 4 gb version (both from Scandisk formatted as FAT32)
Is there a way/possible to flash a stock rom using activesync?

zenkinz said:
I'm afraid to say this, but you have SPL 2.07, which means you are on 'official SPL' and can only flash TMOS Official ROM (since the only SPL 2.07 is tied to US ROM)
I think the only way is to use goldcard, to flash your country's official ROM via sdcard (although I'm not sure if that will work, because I read some folks have problem with that)
Click to expand...
Click to collapse
Okej :O. Im not 100% sure what you meen, but is my warranty valid then?
Im gona send my hd2 in to htc cuz my display is broke. So i perhaps get a new phone. So the only thing im intrested in is to get my warranty valid.

lovenvik said:
Okej :O. Im not 100% sure what you meen, but is my warranty valid then?
Im gona send my hd2 in to htc cuz my display is broke. So i perhaps get a new phone. So the only thing im intrested in is to get my warranty valid.
Click to expand...
Click to collapse
hehe thats the same reason i want to sent my phone back.. its probably cost 213,- euro for me

You flashed it using the SD card method?
People with the same problem in this thread:
http://forum.xda-developers.com/showthread.php?t=630843
In post #64 fards helped XMOO get the device working again, only with SPL 2.07... maybe the rest of the thread provides more info or solutions. I didn't read any further.

lovenvik said:
Hello!
Like the title says: HARDSPL goes wrong.
I need to uninstall hardspl so i can use my warranty.
I have follow the tutorial in this thread how to uninstall it http://forum.xda-developers.com/showthread.php?t=611433
When the flash is compleated and its time for reboot i got this message http://www.youtube.com/watch?v=hWWpBbQTPb8
If i take out the memorycard and reboot i got this message http://www.youtube.com/watch?v=O4S-Rcqwlsc
If i try to reflash i getting the same message as the firs plus it says "upgrade ROM code error please try agen"
Can some one please help me out with this?
And yes i have done a hard reset.
And yes i have try to boot via usb to reflash.
If its to any help i used a ROM from this thread http://forum.xda-developers.com/showthread.php?t=577717 tha one called "LEO2.07"
Click to expand...
Click to collapse
why dont you try out from this thread ,it has videos to how uninstall hspl
http://forum.xda-developers.com/showthread.php?t=621930

lovenvik said:
Okej :O. Im not 100% sure what you meen, but is my warranty valid then?
Im gona send my hd2 in to htc cuz my display is broke. So i perhaps get a new phone. So the only thing im intrested in is to get my warranty valid.
Click to expand...
Click to collapse
No, your warranty is invalid as you're using an SPL/ROM not for your region - hence why you shouldn't flash a ROM from the SD card as this is the issue you have. You're now stuck with a broken HD2 until HSPL can be used on SPL 2.x

EddyOS said:
No, your warranty is invalid as you're using an SPL/ROM not for your region - hence why you shouldn't flash a ROM from the SD card as this is the issue you have. You're now stuck with a broken HD2 until HSPL can be used on SPL 2.x
Click to expand...
Click to collapse
Okej. Thats not good Hope some one release a HSPL 2.xx then =) But now i can't even use my phone anymore.

(just to double check)when you boot to bootloader, what does it say next to spl?
if it says spl 2.x then the above posts are correct, and you are stuck with spl2 until hspl2 is released.
You CAN get your phone working again, even with spl 2.
You need a goldcard, and you can then flash the 2.x official rom which will at least get your phone working. Once it is working, you can then flash custom roms using sspl BUT ONLY roms based on the 2.x official rom, and you won't be able to change radios using sspl. The only way you can change your radio is flashing a 2.x official rom with the goldcard.