Database Users

Help with my Bricked 8125

I think my 8125 is bricked. I've never had a problem flashing roms until yesterday I tried Farias Kitchen ROM. I flashing went through ok like normal, but when it restarted, it gets a little bit after the second splash screen. The green windows mobile with farias names at the bottom loads, then the topbar of windows mobile loads with the start button, but then nothing else.
I've tried reflashing it in forced bootload mode as well as doing a hard reset. no luck. The update utility keeps telling me that it is an invalid update tool, please get a newer update utility. I've tried taking the battery out for a while and from there doing forced bootloader. Still no luck
Any suggestions?

daddy_yankee1980 said:
I think my 8125 is bricked. I've never had a problem flashing roms until yesterday I tried Farias Kitchen ROM. I flashing went through ok like normal, but when it restarted, it gets a little bit after the second splash screen. The green windows mobile with farias names at the bottom loads, then the topbar of windows mobile loads with the start button, but then nothing else.
I've tried reflashing it in forced bootload mode as well as doing a hard reset. no luck. The update utility keeps telling me that it is an invalid update tool, please get a newer update utility. I've tried taking the battery out for a while and from there doing forced bootloader. Still no luck
Any suggestions?
Click to expand...
Click to collapse
What are you trying to re-flash it with in the BL?
You should be able to flash the loverom without a problem.

TaurusBullba said:
What are you trying to re-flash it with in the BL?
You should be able to flash the loverom without a problem.
Click to expand...
Click to collapse
Thanks, I'm gonna download it right now and try it. What is different about this ROM than any of the cooked roms I have already as well as and official one. All of them in past have worked for me without a problem until now.

daddy_yankee1980 said:
Thanks, I'm gonna download it right now and try it. What is different about this ROM than any of the cooked roms I have already as well as and official one. All of them in past have worked for me without a problem until now.
Click to expand...
Click to collapse
Well, it sounds like it may have just been a bad casserole you cooked.
But, you could probably even re-flash using your carrier ROM. This one is just a fool-proof way to get you back on your feet. This ROM is just G3/G4 independent and doesn't include a radio, ipl/spl, or extrom.

TaurusBullba said:
Well, it sounds like it may have just been a bad casserole you cooked.
But, you could probably even re-flash using your carrier ROM. This one is just a fool-proof way to get you back on your feet. This ROM is just G3/G4 independent and doesn't include a radio, ipl/spl, or extrom.
Click to expand...
Click to collapse
Nope, just tried flashing that ROM mentioned above, and still the same answer. It keeps telling me that I need to get a new update utility. That is so weird because I never had that problem. I have already tried flashing the official as well with no luck.

daddy_yankee1980 said:
Nope, just tried flashing that ROM mentioned above, and still the same answer. It keeps telling me that I need to get a new update utility. That is so weird because I never had that problem. I have already tried flashing the official as well with no luck.
Click to expand...
Click to collapse
So, how exactly are you updating it in the bootloader? (just curious)

TaurusBullba said:
So, how exactly are you updating it in the bootloader? (just curious)
Click to expand...
Click to collapse
I put the phone in bootload mode by pressing and holding the camera button, then resetting by pushing the reset hole which then loads it to a colorful screen which I assume is the bootloader screen. Then I just connect it and try to flash it using one of the ROMS i have. Thats how I did it the past couple of times.

What upgrade utility are you using? You might wanna try the one attached! It is the 'NO_ID' version and up to now it flashed everything! Simply extract the zip file to a folder on your desktop, then copy your nbf file in to it too and run the "ROMUpdateUtility_Wizard_NoID.exe"

hello
im having the same problem, i just tried it, didnt work for me

Did you CID unlock your phone before trying to flash it? Did you also try to flash it with your shipped ROM again?

My phone also appears to be bricked. It locked at 99%, and after trying the steps indicated in the core2.0 installer, it closed, and I'm having difficulty figuring out the next step. As is, I get ERROR [264] CONNECTION. Is there a way to get the phone functional enough to load an OS? I've been searching these forums for about 30 minutes and haven't found what I'm looking for. There should be a recovery wiki.

I have the same problem...
Junner2003 said:
Did you CID unlock your phone before trying to flash it? Did you also try to flash it with your shipped ROM again?
Click to expand...
Click to collapse
Hi Junner, i have the same problem too...i did a unlock CID before i try to put the core 2...but after the boot its freeze on splash screen and nothing happend...what can i do? help me please...tks a lot.

alissonguedes said:
Hi Junner, i have the same problem too...i did a unlock CID before i try to put the core 2...but after the boot its freeze on splash screen and nothing happend...what can i do? help me please...tks a lot.
Click to expand...
Click to collapse
First thing you could try is to flash it with your shipped ROM again (the one you had on there originally). If that does not work you might want to search the forum for the LOVE ROM ??? I never tried that one but people say it should worke on any device (G3 /G4).

I thing more
alissonguedes said:
Hi Junner, i have the same problem too...i did a unlock CID before i try to put the core 2...but after the boot its freeze on splash screen and nothing happend...what can i do? help me please...tks a lot.
Click to expand...
Click to collapse
Every rom that i put in the phone is the same...always freeze on the splash screen...

Junner2003 said:
First thing you could try is to flash it with your shipped ROM again (the one you had on there originally). If that does not work you might want to search the forum for the LOVE ROM ??? I never tried that one but people say it should worke on any device (G3 /G4).
Click to expand...
Click to collapse
I try LOVE too and nothing...the phone is G3 with ipl/spl 1.01

alissonguedes said:
I try LOVE too and nothing...the phone is G3 with ipl/spl 1.01
Click to expand...
Click to collapse
Did you try already to flash your shipped ROM?

I dont have one
Junner2003 said:
Did you try already to flash your shipped ROM?
Click to expand...
Click to collapse
I dont have one...

You can download the Official ROM directly from HTC's site.

alissonguedes said:
I dont have one...
Click to expand...
Click to collapse
Yeah, download that one if Cingular was the original one! If not: let me know what was on there originally!

Junner2003 said:
Yeah, download that one if Cingular was the original one! If not: let me know what was on there originally!
Click to expand...
Click to collapse
A mda vario tmobile from germany...

HELPP!! my 9100 gets stuck after the tmobile startup

I need help please, my phone gets stuck after the tmobile startup screen. I installed the WM6 Titanium correctly, after that I installed some spanish translations and everything was perfectly fine, then I deleted the spanish translations and after that my MDA gets stuck!!! What can I do, I cant even get it started!! PLEASE HELPPPPP !
THANKS

Soft Reset or Hard Reset,see if it helps,otherwise, as the extended rom has become corrupted due to installation/deletion of files.The only way out is to reflash the rom again.
Cheers!

and how can I reflash again?? I am sorry, Im just a noob in this.
If you could tell me the steps, that would be great!! Because I really dont know what to do because it doesnt let me! It just gives me the tmobile screen and after that it blacks out. I cant even soft or hard reset.
I really appreciate it!!

charro_mc said:
and how can I reflash again?? I am sorry, Im just a noob in this.
If you could tell me the steps, that would be great!! Because I really dont know what to do because it doesnt let me! It just gives me the tmobile screen and after that it blacks out. I cant even soft or hard reset.
I really appreciate it!!
Click to expand...
Click to collapse
Oh C'mon !!!
Don't give me this "and how can I reflash again?? I am sorry, Im just a noob in this. "
Just above in your post you said "I installed the WM6 Titanium correctly"
How did you flash it ? and then you installed Spanish translations.
Oops!
BTW, how come,if you flashed the 'wm6 Titaniun' rom and still stuck on T-mobile splash screen.Strange ? if your flash went successful ,your splash screen shud change to the newer wm6 rom and shud not be T-mobile.So,either you were not able to flash the wm6 Titanium or you reverted back to T-mobile official rom.
Is your phone SIM/CID unlocked ?
Cheers!

Ok, here is my problem again.
I CANT GET TO THE WINDOWS MOBILE STARTUP!!!
I turn the phone on, I get the IPL/SPL 2.26 screen and after that BOOM, the screen gets black and I cant do anything!!!
What can I do if i cant even see the Windows Mobile Screen!!??

[REQ]Rogers HTC Bricked - Please Help (Advanced User)

Hello Everybody,
Let me start off by saying that this is the worst phone I've ever used. I had great expectations from this phone but never mind - I'm going to stick to my Excalibur.
This is the first time in my life that i actually bricked a phone. I installed a couple of cooked ROMs and everything went fine. I have experience with CID Unlocking and flashing ROMs. Anyways, all I did was try to flash back to the original Rogers ROM from the Original Shipped ROMS thread and that's when my phone got bricked.
I have searched and done everything possible so far and NOTHING WORKS!
So far I've done this:
1) I have tried flashing the Chinese ROM/Dopod WWE Asia ROM as their official HTC ROM's.
2) Done a hard reset
3) Loads into Boot Loader and the boot loader version is
IPL - 2.21.0002
SPL - 2.21.0000
4) Ran MTTY and i got gsecuritylevel=FF (which means install shipped ROM)
5) Tried running USPL but no luck
6) Tried installing Rogers ROM from the original shipped ROMS thread, still no luck as it gets to 3% and reboots
I seriously don't know what else to do. This is just ANNOYING!! Ive been sitting here for the past 4-5 hours trying to get this damn thing to work.
Is there a way to downgrade the SPL so I could flash a ROM?
Is there a free permanent CID Unock available?
Is there ANY WAY out there to unbrick a Rogers HTC TOUCH
(DAMN ROGERS !!!)
Finally, I'm trying the SD Card ROM Update method and hoping it works.
Mods, if you see this and know of a way to help me out, please do or anyone else who knows what to do so my life is back to normal, please help. Thanks in advance.
EDIT: Ok, I tried the SD Card method, it says Checking SD Card Contents and nothing happened, all i see is a tri color screen. The SD Card is 2 GB, is the only file present on the card and it was renamed accordingly (the .nbh file).
Please help as I'm going nuts trying to fix this.
Best Regards,
lukybandit

Anyone at all?
I've done all the searching I could and everything I've tried so far has failed on me.
I can get into the bootloader, get into the hard reset and even can run a mtty session and no matter what I do, it gets stuck at the HTC logo.
In addition to this, all ROM's that I have tried so far keep getting the Error 270 (Obviously due to not being able to even temporarily CID unlocking it).
I did notice a lot of people have bricked their devices and I figure if i can get into the boot loader screen then at least SOMETHING can be done.

Here is what i have learned.
I have the Rogers Touch, and i said SCREW IT, and going to pick up an AT&T Tilt.. I already have 2 S621's, 1 Tytn 2, and i need another phone for my dad.
I had the touch for 1 week and had the same problem as you. Here is what i gather.
1. YOU CANNOT - install the original ROM if you flashed the incorrect ROM
2. Because there is no HARD SPL, i used the USPL, which on reset will result in a CID relock.
3. In this condition, the only way to reflash if you can't get back into the regular today screen is a custom SPL, by Olipro or something.
But Olipro (i keep forgetting his name), charges 75 GBP which equates to $160CDN or so. I bought my HTC Touch used for $200CDN. Makes no sense to fix it. So i am going to try and sell this phone to someone who wants to fix it for cheap.
Sorry man, i looked EVERYWHERE for a fix, and there was NONE to be found, unless you use this guy , who has succesfully fixed everyone elses phone.
Honestly, if my phone was worth alot more than $200, i would pay him with no issue, but because the fix is the same as buying the same phone again, it makes no sense.

Are you serious?!!!
So there's no way for me to fix this piece of ****? frig man.
I paid for this and now I can't fix it?
Can Rogers find out that I tried playing around with the phone or not? I hope not because It's been only 3 days since I got this and it's been barely used.
If there's a fix, please let me know.
That's not even worth it. If there's someone out there that can fix it, please help - Thanks
P.S: Thanks for your response.

Did you to a reformat/Hard Reset on phone first and then tried to reflash?
Worked for me once when i ****ed up badly.
Reset Button and hold down Both call Buttons.
And maybe i should not ask this but you have removed both SD and SIM card?
I'm uploading a 2.26 Rom at the moment.
Doesn't Canada have Vogue devices like the US? (this is a real question i don't know)
Attached is a 2.26 SPL only.
How far does it get in the Flashing screen (45%)?
And here's Full T-Mobile NL Rom with 2.26 http://rapidshare.com/files/122419910/RUU_signed.nbh.html

http://forum.xda-developers.com/showthread.php?t=347700
treid that?

Noonski said:
Did you to a reformat/Hard Reset on phone first and then tried to reflash?
Worked for me once when i ****ed up badly.
Reset Button and hold down Both call Buttons.
And maybe i should not ask this but you have removed both SD and SIM card?
I'm uploading a 2.26 Rom at the moment.
Doesn't Canada have Vogue devices like the US? (this is a real question i don't know)
Attached is a 2.26 SPL only.
How far does it get in the Flashing screen (45%)?
And here's Full T-Mobile NL Rom with 2.26 http://rapidshare.com/files/122419910/RUU_signed.nbh.html
Click to expand...
Click to collapse
Yes, I think I did do a hard reset but I will try again in 5 mins. It was a bad flash cause it stopped in the middle I think.
Yup Both SD Card & SIM Card Removed.
Im guessing the only way I could fix this would be - get the original shipped ROM but so far I was only able to find a dump and not an actual update installer.
My SPL & USPL is 2.21 - So what do you recommend. upgrading the SPL and then trying to re-flash..
Would the TMobile ROM work because my phones Rogers branded and no Canada does not have the Vogue.
In answer to your question, it doesn`t go more than 2-3 % and then gives me an Update Error (270)
ahhh...this is driving me insane.
Thanks so much for the help so far. Really hope you guys can help me out here.

The main thing is if it flashes SPL only in general or if it does the same thing.
You might even try just flashing the SPL 1.11.11 from Pof from bootloader.
Or just flash the original SPL.
If it doesn't I don't know a way of unlocking in Bootloader.
But more heads will pop up with some Flashing Nightmares experiences soon.

Noonski said:
Did you to a reformat/Hard Reset on phone first and then tried to reflash?
Worked for me once when i ****ed up badly.
Reset Button and hold down Both call Buttons.
And maybe i should not ask this but you have removed both SD and SIM card?
I'm uploading a 2.26 Rom at the moment.
Doesn't Canada have Vogue devices like the US? (this is a real question i don't know)
Attached is a 2.26 SPL only.
How far does it get in the Flashing screen (45%)?
And here's Full T-Mobile NL Rom with 2.26 http://rapidshare.com/files/122419910/RUU_signed.nbh.html
Click to expand...
Click to collapse
I just performed a hard reset and tried reflashing but still no luck. It gets to 3% then reboots.
In regards to what you attached, how do I go about doing it? Let me know. I downloaded the 2.26 SPL and the NL ROM.

Noonski said:
The main thing is if it flashes SPL only in general or if it does the same thing.
You might even try just flashing the SPL 1.11.11 from Pof from bootloader.
Or just flash the original SPL.
If it doesn't I don't know a way of unlocking in Bootloader.
But more heads will pop up with some Flashing Nightmares experiences soon.
Click to expand...
Click to collapse
Original SPL being Rogers (Can't find it anywhere except a dump)?
k I'll try flashing the SPL 1.11
- Any other thoughts, bro? Thanks!

Did u tried SD card flashing??

Yeah, I did.
I tried the .nbh from the Rogers Dump and it says Invalid Certificate. I tried this other .nbh which said Dead_Elfin, still no luck and the Dopod Asia
I'm so mad/upset and I've tried so many methods to fix it. Is there no way I can get the Rogers dump to work in any way?

Hey man!
Somewhere in this thread (2nd page) a guy refers to a ROM that revives your half-dead Touch, "if you trust him"!
But you don't have anything to lose at this point,
so check it out! The link to the ROM is still alive.
Good Luck!
Regards!

kokotas said:
Hey man!
Somewhere in this thread (2nd page) a guy refers to a ROM that revives your half-dead Touch, "if you trust him"!
But you don't have anything to lose at this point,
so check it out! The link to the ROM is still alive.
Good Luck!
Regards!
Click to expand...
Click to collapse
I tried that but it didn't work but I'm trying once more now. Hopefully it'll work.

lukybandit said:
I tried that but it didn't work but I'm trying once more now. Hopefully it'll work.
Click to expand...
Click to collapse
EDIT: Didn't work, updates to 3% then reboots. Just Great !!! This is so annoying.

Erro 270, wasn't that image corrupt error.
Damn Olipro can't you help a Mod out yous.
Threaten to ban his ass.
When you say Dumped Roger's rom, you prolly mean dumped Roger's rom, then repacked with HTCRT right?
And not the official full Exe installer.

Noonski said:
Erro 270, wasn't that image corrupt error.
Damn Olipro can't you help a Mod out yous.
Threaten to ban his ass.
When you say Dumped Roger's rom, you prolly mean dumped Roger's rom, then repacked with HTCRT right?
And not the official full Exe installer.
Click to expand...
Click to collapse
yeah, i meant the dumped Roger's ROM.
This is the most annoying thing I've ever had to deal with in terms of owning all my phones. I am selling this phone or returning it back the moment I fix it.
And I'd threaten but he hasn't done anything lol
I hope he does help me out.

Noonski said:
Erro 270, wasn't that image corrupt error.
Damn Olipro can't you help a Mod out yous.
Threaten to ban his ass.
When you say Dumped Roger's rom, you prolly mean dumped Roger's rom, then repacked with HTCRT right?
And not the official full Exe installer.
Click to expand...
Click to collapse
i think its time we make it clear to everybody that XDA means SHARING to help everyone out and not to ask for money in return for something. XDA should only be for those ppl who can work hard for everyone without asking for money.

This phone was the biggest mistake I ever made in my life. I'm sick and tired of this already and I still haven't been able to get it fixed.

LukyBandit
I tried everything that these guys told you to do, NOTHING WORKS.
We have an operator branded device and do not have an ORIGINAL ROM to load in other than a DUMP.
Thats why we are stuck.
I am looking for someone local GTA that might charge less, but yes your TOUCH is fukked unless you are willing to pay OLIPRO $160CDN to fix a phone thats worth $200ish.
I am buying a TILT today, its not worth the stupid touch to fix.
What a waste of money that was. I am so happy my TYTN2 and my soon to purchase TILT has a HARD SPL to it.

format failed .. stuck on splash screen..

hey guys.. i need some help
i installed an app an asked me to restart the device.. i did
and now it's stuck on the splash screen
IPL 2.27
SPL 2.27
GSM 02.44.11
OS 2.27.1.1
and the orange brand wallpaper
what can i do? i tried to reset it and format it
but an error shows up
"Press Send to restore factory default,
Other keys to quit"
ok.. send it is
"Format FAT Partition
Format failed"
i can enter RGB bootloader (cam button+power), but i don't know what i can do??
ps: i just got it from a friend, i don't think my phone is cid-unlocked..
and i'm stuck at the splash screen and nothing to do
please help me.. tell me what can i do

Ouch.
Sounds like the built-in flash memory is bad. I'm not sure what you can do about that, short of replacing it.

No offense Reverend, but where did you hear that? Its just bad flash man! Simply enter the bootloader mode, and re-flash a new rom to your device. What program where you trying to install?

ashasaur said:
Its just bad flash man! Simply enter the bootloader mode, and re-flash a new rom to your device. What program where you trying to install?
Click to expand...
Click to collapse
something from a pocket freeware site.. "XDA-Team_Manilla2D.CAB"
it's a touchflo 2d app for today screen.. after installing it, the sistem wouldn't boot up anymore. so i tried to format, soft reset, to restore the system..
the formatting started and then gave an error and shut down immediately. i didn't even catch a glimps of that error 'cause it restarted.. and then the problem. it won't go past the operator splash screen
tried to reformat.. would't start.. format failure
..simply wow.. don't get me wrong , but i didn't knew there was a bootloader screen until this happened.. i dug up about this problem on the forum, but i can't solve it.. i don't know that much about flashing.. isn't the wizard supposed to be cid-unlocked to be able to flash it with a new rom?
or there's a rom that doesn't require the pda to be unlocked?.. cause' i think mine isn't. and, since i can't get it to boot up the os, i can't cid-unlock it after the tutorials i've found here..
and i don't want to bury it, yet

Oh you poor sole...that program that you tried to flash is notorious...I did the very same thing to mine just the other day. It doesnt work with the Wizard yet for some reason.
Now, onto your problem, yes-I think that your Wizard IS INDEED CID locked, and if that is the case, search for the Wizard LOVE ROM and flash it. It can be flashed with a CID unlocked device. Head into your bootloader mode, then start up the RUU flashing program on your PC that is included with the ROM. After it flashes, you can use the Wizard Service Tool, which is also availible via searching to CID and SIM unlock your device, and then you can put any ROM that you like onto it. I hope that helps somewhat!

If you can get it into bootloader mode, you can recover. If the phone is not unlocked, you will have to load the original service ROM for that phone.
You MIGHT get lucky by just flashing the IPL/SPL back though, now that I think about it...look at the "How to Remove HardSPL" thread for the most popular IPL/SPL sets. If this works, you won't have to put all of your custom settings and programs back on.

Myrddin Wyllt
Plz note all the IP/SPL posted in the thread 'How To Remove HardSPL' are for G4 devices and they are not meant to be flashed to a G3 device,if flashed will certainly 'Brick' the G3 device.
Whereas,here ,he has a G3 device with IPL/SPL 2.27,flashing those IPL/SPL (Bootloaders) means instant death of the phone.
koolariz
Simply,download the official stock rom of the carrier and flash it in Bootloader mode to recover back to its default status,than downgrade to IPL/SPL 1.xx to CID unlock the phone,how to CID unlock the phone, read and follow this guide carefully :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies

zabardast_1 said:
koolariz
Simply,download the official stock rom of the carrier and flash it in Bootloader mode to recover back to its default status
Click to expand...
Click to collapse
i can't find anywhere the original one.. my wizard is in orange.ro carrier [orange spv m3000].. i tried on varios romanian discussion site's but only found radio rom's i'll keep searching...
any ideea what other kind might work with cid-locked?
i found this one on xda ftp:
Orange_SPV_M3000-FRA
Orange SPV M3000 ROM update 2.18.1.3
on ftp://[email protected]/Wizard/Roms/Orange/

If it is truth....
koolariz said:
i can't find anywhere the original one.. my wizard is in orange.ro carrier [orange spv m3000].. i tried on varios romanian discussion site's but only found radio rom's i'll keep searching...
any ideea what other kind might work with cid-locked?
i found this one on xda ftp:
Orange_SPV_M3000-FRA
Orange SPV M3000 ROM update 2.18.1.3
on ftp://[email protected]/Wizard/Roms/Orange/
Click to expand...
Click to collapse
If you have said the truth... you've got a G3 device cause your ipl spl are 2.27.
So try to install this original ROM... is for Tmobile WWE so try it.... http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html
Or search on tutorials tu unlock and upgrade the wizard Love ok?
Good luck men...
And please please please read and ask before do anything, BTW now the only you can do is to runn this ROMs cause you cant get your original carriers ROM.
If this dont works... please read the thread from upgrading forum in this wizard subforum that said something like Stuck on splash screen solution DYI or something the tuttorial DEV is called Drug_store.

zabardast_1 said:
Myrddin Wyllt
Plz note all the IP/SPL posted in the thread 'How To Remove HardSPL' are for G4 devices and they are not meant to be flashed to a G3 device,if flashed will certainly 'Brick' the G3 device.
Whereas,here ,he has a G3 device with IPL/SPL 2.27,flashing those IPL/SPL (Bootloaders) means instant death of the phone.
Click to expand...
Click to collapse
Good catch. Sorry about that!

Myrddin Wyllt said:
Good catch. Sorry about that!
Click to expand...
Click to collapse
Nah! buddy,you are doing fine,its just we sometime overlook the post,it happens to all of us,so no harm done !

koolariz said:
i can't find anywhere the original one.. my wizard is in orange.ro carrier [orange spv m3000].. i tried on varios romanian discussion site's but only found radio rom's i'll keep searching...
any ideea what other kind might work with cid-locked?
i found this one on xda ftp:
Orange_SPV_M3000-FRA
Orange SPV M3000 ROM update 2.18.1.3
on ftp://[email protected]/Wizard/Roms/Orange/
Click to expand...
Click to collapse
YES ! you can try this rom or download the WWE (English) version of Orange SPV M3000 Official WM5 Rom from here :
http://www.megaupload.com/?d=5OZEILXK

zabardast_1 said:
YES ! you can try this rom or download the WWE (English) version of Orange SPV M3000 Official WM5 Rom from here :
http://www.megaupload.com/?d=5OZEILXK
Click to expand...
Click to collapse
10x a lot.. i hope it won't die on me..
LE:
i tried the O2 rom [12.18.3.103] u gave me. it doesn't start flashing.. 0% and then
quoting:ERROR "This NBF file cannot be used for your PDA phone. Please get newer NBF file."
ps: The orange one on the xda ftp server doesn't work .. it's archived and parts are missing..

Hmmm,ok,lets try this out,download 'Button's Rom 1.05' from the link posted below and check if this works out.
Otherwise,you'll have to look for official Stock Rom (Romanian),which was running on the phone before.
http://wiki.xda-developers.com/index...0for newbies

i'll try this one.. for now.. ps:your link is broken?
i just have another question.. i have a friend with the same wizard as mine, i mean in the same carrier.. is it possible cu get his rom? to dump it on SD card.. or something?
so that i may flash that rom?
LE:
i found another thing on a DIY
If you got IPL/SPL 1.xx go to G3.3. If you got 2.xx go to G3.4
G3.3 Download button rom and flash it to your device. Your device should startup again after doing this. Go to G3.5.
G3.4 Download wizard_love rom and flash it to your device. Your device should startup again after doing this. Go to G3.5.
Click to expand...
Click to collapse
should i try the wizard_love rom?

ok,download Button's Rom 1.05 from here:-
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
also try this one :-
xda_miniS_LaunchRom
http://rapidshare.com/files/43423464/Xda_MiniS_LaunchROM_v154102.exe
and yes! you can also try Wizard_Love _Rom.
Now,its possible to back up the rom from your friend's phone,but it also have to be CID unlocked first and your device shud also be CID unlocked to flash it from the sdcard (MTTY) method.

pfff (
i've updated the rom with the Wizard_Love_2.26.10.2_WWE_Novii_CF2 and now i have a blue sci-fi splash screen with "AKU 2.3" in the top-right corner..
IPL 2.27
SPL 2.27
GSM 02.25.11
OS 2.26.10.2
same ****
won't boot up
and if i try to format, same error.. Format Failed.. so here i am again

hmmmm,try a Hard Reset,hope it works or try other roms I have posted above.
Do you have any sdcard inserted in the phone right now,take it out before flashing any rom.

koolariz said:
won't boot up
and if i try to format, same error.. Format Failed.. so here i am again
Click to expand...
Click to collapse
dude.. that's what i've been trying hard reseting it.. and i get the same error each time i try it "Format Failed"
no sd inserted.. i took it out a while ago.. cause i read on the forum to flash without it.
i begining to get desperate over here
i'll try other roms..
what else can i do than hope this works

Also take out if any sdcard or mini sd is inserted in the phone before flashing,it also causes this Format Failed problem.

***HELP*** Stuck while updating then got image corrupt error now stuck on bootloader

In urgent help I was updating my herald to NEW Simply Everything 6.5.1 Build 23420 when the update got stuck on 28% and then got error image corrupt. my herald restarted in bootloader mode and since its been like this my IPL AND SPL ARE 4.17. Please someone help. i will be really thankfull to you guys if you can give me an easy way out. i really dont want to do the goldcard thing again as its really difficult to get other WM phone to write the security thing in the memory card. at the moment any rom well do i just sold my other phone and the same day this happen so i dont have any phone. please help

Have you got a Herald or a T-Mobile Wing? If you have a Wing, just go into bootloader and install the T-Mobile ROM. Seems to me like you didn't HardSPL before you tried to upgrade. If you have a Herald then I am not sure what to tell you to be honest:/

ebel said:
In urgent help I was updating my herald to NEW Simply Everything 6.5.1 Build 23420 when the update got stuck on 28% and then got error image corrupt. my herald restarted in bootloader mode and since its been like this my IPL AND SPL ARE 4.17. Please someone help. i will be really thankfull to you guys if you can give me an easy way out. i really dont want to do the goldcard thing again as its really difficult to get other WM phone to write the security thing in the memory card. at the moment any rom well do i just sold my other phone and the same day this happen so i dont have any phone. please help
Click to expand...
Click to collapse
You should be able to flash while being in that mode.
Connect the phone through USB, and try flashing again. Try flashing to a different ROM, if necessary.

Well i have a HTC P4350 so i guess it Herald. well and yes i didnt Hardspl it's my bad was just too happy that i could update to the coustomised roms that u briliant guys are making here, but i have flashed like so many roms wm 6.1 to now adays the latest wm 6.5.1. but this never really happened. yes i am able to start the RUU it checks the device the when i click update it goes to either 2% or 3% and thats it gives me the image corrupt error.

ebel said:
Well i have a HTC P4350 so i guess it Herald. well and yes i didnt Hardspl it's my bad was just too happy that i could update to the coustomised roms that u briliant guys are making here, but i have flashed like so many roms wm 6.1 to now adays the latest wm 6.5.1. but this never really happened. yes i am able to start the RUU it checks the device the when i click update it goes to either 2% or 3% and thats it gives me the image corrupt error.
Click to expand...
Click to collapse
Yea, it means that you're trying to flash a ROM that requires you to be HardSPLed and flashed through SD Card, since the .NBH file is too small to be flashed through PC.
Either HardSPL your phone and follow the instructions for flashing through SD, OR find another ROM that doesn't require you to flash through SD card.

i have tride many roms but they r doing the go to 1 or 2 percent and the device resets. i will be really thankfull if you can tell me which rom to use exactly