Related
First of all THANK YOU all of the Great Minds of XDA Developers for all the support and great work you do for us!
a lot of your work, support and software and advice has been priceless help!
Any way no ass kissing here, just wanted to say thank you. ...and ask for help. As you probably know, there has been a lot of problems and issues with Prophet. (and very little or NO support and from manufacture and from providers. and there is not much available from xda developers forum users on this device. Though there has been great amount of support on any other devices. which has made me a happy user of Magician. But to cut it short, PLEASE HELPPPPPPP with Prophet!!! I can't reflash my XDA Neo with new WWE rom due to CID (vendor ID) error! It comes with german rom and I don't read german but love the phone! (and stuck with 2 year contract!) I tried aWisard utility numerus times in hopes that it would work despite the design for different device. I tried all kinds of roms available out there with no luck. and ofcourse HTC or O2 wouldn't help in any way! (different O2 support
techs said to me that I couldn't flash my Magician with WWE rom becouse it would kill the device! And I had it flashed in all the possible languages!) Any way, my magician is now a history (sold) and my new prophet is great pain in a ass!
Do you guys think you could help all of the xda community (and unlucky suckers) out here and help us overcome CID error so we can update/change our roms? (and screw the HTC, Qtek, Imate and O2 for such a poor support!)
I would greatly appreciate it! and it goes from all of us!
hi aleksandr
Just go the link below and follow the instruction to unlock the CID.
I just upgraded my 818 Pro to JAMin ROM, run very smoothly.
http://forum.xda-developers.com/viewtopic.php?t=37386
Hi, thank you very much for the reply! I did try this option but I have a little problem with Wisard program. I ran all the commands, enabled rapi,backed up my rom, ran unlock CID command, it returned "success" line, but when I try option -w- to write new rom into my prophet and get to "select OS rom file" where it saids to enter numbers only I don't know what to enter in the command line since the program doesn't have any roms listed in the command line screen. I've tried entering the rom release number, I even tried renaming rom to a number and I have placed the rom nk.nbf file in all the possible folders including "rom" in the program directory. but stil, once I hit enter, the command line window shuts down. could you advise?
and I did put the aWizard folder and rom file in the root directory on c:... tried d: too... stil, no result
Hi Alek,
Try this....
You now have a device that is CID unlocked, exit aWizard and locate the downloaded RUU update you now wish to load to your device. You should not need to use aWizard to do the flashing, just use the aWizard program to unlock the CID from the device.
I too have a Dopod 818Pro and I successfully flashed it to the new I-Mate JAMin ROM. All I used aWizard for was to unlock the CID on the Dopod 818Pro then exited aWizard and just used the downloaded RUU update.
Regards,
voyager
Thanks voyager, I guess you're very fast typist :lol:
Hi aleksandr,
Did you did an ActiveSync with your Prophet first then run the aWizard? For me I just run aWizard to enable RAPI and unlock the CID on my 818 Pro. Then I just double click on the latest JAMin ROM exe file, it detect my 818 Pro without any problem.
ualvoyager said:
Hi Alek,
Try this....
You now have a device that is CID unlocked, exit aWizard and locate the downloaded RUU update you now wish to load to your device. You should not need to use aWizard to do the flashing, just use the aWizard program to unlock the CID from the device.
I too have a Dopod 818Pro and I successfully flashed it to the new I-Mate JAMin ROM. All I used aWizard for was to unlock the CID on the Dopod 818Pro then exited aWizard and just used the downloaded RUU update.
Regards,
voyager
Click to expand...
Click to collapse
First of all thank you guys for getting involved and helping! I really appreciate it!
well, I tried just to CID unlock it with aWisard, got "successful" message and then I ran about 10 different upgrades from different providers, qtek, Imate, etc, and still got the wrong vender message!
hey mamakap,
you're right on the fast typing, my fingers are still burning...hee hee
voyager
mamakap said:
Thanks voyager, I guess you're very fast typist :lol:
Hi aleksandr,
Did you did an ActiveSync with your Prophet first then run the aWizard? For me I just run aWizard to enable RAPI and unlock the CID on my 818 Pro. Then I just double click on the latest JAMin ROM exe file, it detect my 818 Pro without any problem.
Click to expand...
Click to collapse
I usualy ran after sync, since the aWisard said it has to be fully ran. I will try it now!
Thank you! hopefully with all of your support I'll get the nedded results! Thanx!!
ok, just tried enable rapi with active sync off, the aWisard reopened and reastablished connection, but it still not finding the rom file.
wait a minute, does the rom file has to be in .nbf format or .nba?!
I'm looking right now for Extend Tool (64HTC Extended ROM Tool) and will convert the rom rom to nba file and see what happends.
man, I wonder how it worked for you just running unlock CID command and upgrading with the upgrade file!
Alek,
You already unlocked the CID from your device did you not? Your first post said you got a success message.
Put your device on the cradle or plug in the usb cable. Let ActiveSync do its thing then after the sync just double click on the RUU update you want to install. Follow the install wizard (NOT aWIZARD) of the RUU update. You do not need aWizard any longer to update the ROM, just use the RUU update you downloaded.
post if you need further help.
voyager
ualvoyager said:
Alek,
You already unlocked the CID from your device did you not? Your first post said you got a success message.
Put your device on the cradle or plug in the usb cable. Let ActiveSync do its thing then after the sync just double click on the RUU update you want to install. Follow the install wizard (NOT aWIZARD) of the RUU update. You do not need aWizard any longer to update the ROM, just use the RUU update you downloaded.
post if you need further help.
voyager
Click to expand...
Click to collapse
I've tried that several times and its still returnes the error!
Alek, one more thing ... you do realize that by doing this, you will wipe your device clean (hard reset) and you will need to load everything from scratch. If you use a back up program like Sprite or SPB backup YOU CAN NOT USE THAT BACKUP once you do this!!! You will be loading everything from scratch.
Just letting you know!!
voyager
OK Alek,
Tell me EVERYTHING you have done up to this point. I need to know what device you have, what ROM is currently on it and what ROM you want to flash with. Give me 5-10mins and I'll check back....lets try to get this resolved for you tonight.
voyager
yep! I do know this.. thank you though! I had an experience with Magician on that but I guess it's not much help with prophet though!
I haven't installed anything on this device yet.. just played with ExtRom, unlocked it and deleted O2 staff out of it just to see if I can do it But I do want to get the right OS in here first and then I'll worry about the rest of programs..
you guys wouldn't happen to have Extend Tool (64HTC Extended ROM Tool)would you? I'm visiting my family and I'm on my brothers PC dont have all my staff with me,and can't seem to find it on the XDA FTP
:?: What 64HTC Extended ROM tool are you referring to? If you're on your brothers computer do you have an ActiveSync connection to YOUR device? If so, is all synced up with your Outlook profile etc...?
First I need to know which Prophet you have (Dopod 818Pro, I-Mate JAMin or Q-Tek S200).
First let me say this, if you have a Q-Tek S200, I don't think you are going to be able to upgrade the ROM. I have seen several threads here that indicate that somehow Q-Tek S200 is permanently locked and that the aWizard program will NOT work on it no matter what, (or at least until some geneius here figures it out
Please let me know
voyager
ualvoyager said:
OK Alek,
Tell me EVERYTHING you have done up to this point. I need to know what device you have, what ROM is currently on it and what ROM you want to flash with. Give me 5-10mins and I'll check back....lets try to get this resolved for you tonight.
voyager
Click to expand...
Click to collapse
Hey, thank you so much! I really appreciate it!
ok, I have XDA Neo, German Version
rom 2.9.4.30 GER
rom date 2.14.06
protocol 413.1.03
ExtRom 2.9.4.120
First I have unlocked ExtRom with Wizards Utility
Then I tried to reflash the device to WWE rom with different upgrade utilities from different venders, tried Qtek s200,it didn't work, reterned wrong Vender ID error, then Imate- same result, then Dopod, using diferent RUU wizards, including Wizard Rom Upgrade Utility NoID.
still, no luck..
then I tried aWizard,
first I ran Rapi enable
second I made a back up of my own rom,
then Unlock CID,
then tried writing rom using aWisard, didnt work, aWizard doesn't finds any roms(and the program and rom are in the root directory of c
then tried just unlocking the CID and use Upgrade Wizards again, still, no luck!
tried praying, that didn't help either!
thinking about beer now! But I don't think that would help either
I did sync with PC and outlook.. activeSync4.1
I even tried flashing it with Danish rom, that I couldn't install it either..(I've read on XDA that flashing danish rom first than and only than I could try it to put WWE in to it. well, that didn't work either)
I tried running all possible rom upgrades that are available, and always got wrong vender id error.
even after aWizard reported that my rom was unlocked!
so I have no Idea what else I can try!
may be getting drunk and "sync it in the toilet"!
If we get this to work, you owe me a beer!!! OK, here's what I need you to do...
1) I tried researching this board for any signs of the O2 Neo being permanently locked like the Q-Tek S200, could find NOT anything. (edited, could NOT find anything)
2) Do you have a copy of the I-Mate JAMin RUU update on your brothers computer? If so great, if not, go get it. Try the latest one that came out yesterday.
3) Once you have this I-Mate JAMin ROM (save it to the Desktop for easy finding later) let me know.
4) Also, make sure you have ActiveSync 4.1 and it is set up and you have synced at least once with it. It doesn;t matter at this point what PIM info is on it since its going buh bye ina while, I just need it synced with a REAL partnership, not Guest.
Let me know when you have all these things done...
voyager
you've got the deal on bear! all you can drink! I'll bring you the german staff on my next visit to states!
any way, got it all! Imate jamin rom and sync has been done!
OK,
1) do a soft reset on the device. Once the device is fully up again, plug the usb cable in and let ActiveSync do its thing.
2) Open aWizard. Run the Rapi deal again. After that run the unlock CID.
3) If you get a success message after the unlock CID, CLOSE aWizard.
DO NOT UNPLUG THE NEO FROM THE USB!!! Let me know when this is done.
I found your 64HTC Tool:
http://buzzdev.net/component/option,com_remository/Itemid,100/func,fileinfo/id,196/
Hi all. I appologize for starting a new thread, but I wasn't sure which topic to post under as this problem seems to span a few. In short, here's my problem: I'm trying to upgrade my Tmobile UK MDA Vario to 2.26.10.2 from 1.6.2.4 WWE. I'm using the stock Tmobile USA ROM updater available from the tmobileapps site.
When I run the upgrade file I get a failure with an Error 294 - Invalid Vender ID. While I don't understand why UK and USA would have different locks, I figured fine, I'll use lokiwiz to unlock my phone.
I've tried lokiwiz 0.2b to unlock the CID, but I get the itsutils.dll error (that it can't update the file).
So now I'm stuck. I can't upgrade the ROM using the US ROM, and I can't seem to CID unlock the phone to allow me to use another ROM. The official UK ROM is sitting a few versions back, and I don't want to have to upgrade twice, so that's out (unless someone can point me to a site where I can get the newer UK ROM).
Anyone know what I should try? I'm kinda stumped. The only think I can think of is that I'm only activesynced to this computer as a Guest, not as a real activesync pairing. Could that effect either the ROM upgrade or the unlocker?
For reference, here's more info about my phone:
IPL 1.06
SPL 1.01
GSM 1.12.10
OS 1.6.2.4
Any help or pointers would be appreciated!
Did u install the EnableRAPI CAB in your phone before starting lokiwiz?
Also, i remember that i had to run lokiwiz 0.2b twice to unlock my phone and my friend's one.
So try this: soft reset the phone, install enableRapi.cab, run lokiwiz and then run it again.
Good luck!
bye!
Yup, that was it. I thought I only needed the EnableRAPI CAB if I was SIM unlocking. Silly me.
Thank you!
hey guys.. i need some help
i installed an app an asked me to restart the device.. i did
and now it's stuck on the splash screen
IPL 2.27
SPL 2.27
GSM 02.44.11
OS 2.27.1.1
and the orange brand wallpaper
what can i do? i tried to reset it and format it
but an error shows up
"Press Send to restore factory default,
Other keys to quit"
ok.. send it is
"Format FAT Partition
Format failed"
i can enter RGB bootloader (cam button+power), but i don't know what i can do??
ps: i just got it from a friend, i don't think my phone is cid-unlocked..
and i'm stuck at the splash screen and nothing to do
please help me.. tell me what can i do
Ouch.
Sounds like the built-in flash memory is bad. I'm not sure what you can do about that, short of replacing it.
No offense Reverend, but where did you hear that? Its just bad flash man! Simply enter the bootloader mode, and re-flash a new rom to your device. What program where you trying to install?
ashasaur said:
Its just bad flash man! Simply enter the bootloader mode, and re-flash a new rom to your device. What program where you trying to install?
Click to expand...
Click to collapse
something from a pocket freeware site.. "XDA-Team_Manilla2D.CAB"
it's a touchflo 2d app for today screen.. after installing it, the sistem wouldn't boot up anymore. so i tried to format, soft reset, to restore the system..
the formatting started and then gave an error and shut down immediately. i didn't even catch a glimps of that error 'cause it restarted.. and then the problem. it won't go past the operator splash screen
tried to reformat.. would't start.. format failure
..simply wow.. don't get me wrong , but i didn't knew there was a bootloader screen until this happened.. i dug up about this problem on the forum, but i can't solve it.. i don't know that much about flashing.. isn't the wizard supposed to be cid-unlocked to be able to flash it with a new rom?
or there's a rom that doesn't require the pda to be unlocked?.. cause' i think mine isn't. and, since i can't get it to boot up the os, i can't cid-unlock it after the tutorials i've found here..
and i don't want to bury it, yet
Oh you poor sole...that program that you tried to flash is notorious...I did the very same thing to mine just the other day. It doesnt work with the Wizard yet for some reason.
Now, onto your problem, yes-I think that your Wizard IS INDEED CID locked, and if that is the case, search for the Wizard LOVE ROM and flash it. It can be flashed with a CID unlocked device. Head into your bootloader mode, then start up the RUU flashing program on your PC that is included with the ROM. After it flashes, you can use the Wizard Service Tool, which is also availible via searching to CID and SIM unlock your device, and then you can put any ROM that you like onto it. I hope that helps somewhat!
If you can get it into bootloader mode, you can recover. If the phone is not unlocked, you will have to load the original service ROM for that phone.
You MIGHT get lucky by just flashing the IPL/SPL back though, now that I think about it...look at the "How to Remove HardSPL" thread for the most popular IPL/SPL sets. If this works, you won't have to put all of your custom settings and programs back on.
Myrddin Wyllt
Plz note all the IP/SPL posted in the thread 'How To Remove HardSPL' are for G4 devices and they are not meant to be flashed to a G3 device,if flashed will certainly 'Brick' the G3 device.
Whereas,here ,he has a G3 device with IPL/SPL 2.27,flashing those IPL/SPL (Bootloaders) means instant death of the phone.
koolariz
Simply,download the official stock rom of the carrier and flash it in Bootloader mode to recover back to its default status,than downgrade to IPL/SPL 1.xx to CID unlock the phone,how to CID unlock the phone, read and follow this guide carefully :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
zabardast_1 said:
koolariz
Simply,download the official stock rom of the carrier and flash it in Bootloader mode to recover back to its default status
Click to expand...
Click to collapse
i can't find anywhere the original one.. my wizard is in orange.ro carrier [orange spv m3000].. i tried on varios romanian discussion site's but only found radio rom's i'll keep searching...
any ideea what other kind might work with cid-locked?
i found this one on xda ftp:
Orange_SPV_M3000-FRA
Orange SPV M3000 ROM update 2.18.1.3
on ftp://[email protected]/Wizard/Roms/Orange/
If it is truth....
koolariz said:
i can't find anywhere the original one.. my wizard is in orange.ro carrier [orange spv m3000].. i tried on varios romanian discussion site's but only found radio rom's i'll keep searching...
any ideea what other kind might work with cid-locked?
i found this one on xda ftp:
Orange_SPV_M3000-FRA
Orange SPV M3000 ROM update 2.18.1.3
on ftp://[email protected]/Wizard/Roms/Orange/
Click to expand...
Click to collapse
If you have said the truth... you've got a G3 device cause your ipl spl are 2.27.
So try to install this original ROM... is for Tmobile WWE so try it.... http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html
Or search on tutorials tu unlock and upgrade the wizard Love ok?
Good luck men...
And please please please read and ask before do anything, BTW now the only you can do is to runn this ROMs cause you cant get your original carriers ROM.
If this dont works... please read the thread from upgrading forum in this wizard subforum that said something like Stuck on splash screen solution DYI or something the tuttorial DEV is called Drug_store.
zabardast_1 said:
Myrddin Wyllt
Plz note all the IP/SPL posted in the thread 'How To Remove HardSPL' are for G4 devices and they are not meant to be flashed to a G3 device,if flashed will certainly 'Brick' the G3 device.
Whereas,here ,he has a G3 device with IPL/SPL 2.27,flashing those IPL/SPL (Bootloaders) means instant death of the phone.
Click to expand...
Click to collapse
Good catch. Sorry about that!
Myrddin Wyllt said:
Good catch. Sorry about that!
Click to expand...
Click to collapse
Nah! buddy,you are doing fine,its just we sometime overlook the post,it happens to all of us,so no harm done !
koolariz said:
i can't find anywhere the original one.. my wizard is in orange.ro carrier [orange spv m3000].. i tried on varios romanian discussion site's but only found radio rom's i'll keep searching...
any ideea what other kind might work with cid-locked?
i found this one on xda ftp:
Orange_SPV_M3000-FRA
Orange SPV M3000 ROM update 2.18.1.3
on ftp://[email protected]/Wizard/Roms/Orange/
Click to expand...
Click to collapse
YES ! you can try this rom or download the WWE (English) version of Orange SPV M3000 Official WM5 Rom from here :
http://www.megaupload.com/?d=5OZEILXK
zabardast_1 said:
YES ! you can try this rom or download the WWE (English) version of Orange SPV M3000 Official WM5 Rom from here :
http://www.megaupload.com/?d=5OZEILXK
Click to expand...
Click to collapse
10x a lot.. i hope it won't die on me..
LE:
i tried the O2 rom [12.18.3.103] u gave me. it doesn't start flashing.. 0% and then
quoting:ERROR "This NBF file cannot be used for your PDA phone. Please get newer NBF file."
ps: The orange one on the xda ftp server doesn't work .. it's archived and parts are missing..
Hmmm,ok,lets try this out,download 'Button's Rom 1.05' from the link posted below and check if this works out.
Otherwise,you'll have to look for official Stock Rom (Romanian),which was running on the phone before.
http://wiki.xda-developers.com/index...0for newbies
i'll try this one.. for now.. ps:your link is broken?
i just have another question.. i have a friend with the same wizard as mine, i mean in the same carrier.. is it possible cu get his rom? to dump it on SD card.. or something?
so that i may flash that rom?
LE:
i found another thing on a DIY
If you got IPL/SPL 1.xx go to G3.3. If you got 2.xx go to G3.4
G3.3 Download button rom and flash it to your device. Your device should startup again after doing this. Go to G3.5.
G3.4 Download wizard_love rom and flash it to your device. Your device should startup again after doing this. Go to G3.5.
Click to expand...
Click to collapse
should i try the wizard_love rom?
ok,download Button's Rom 1.05 from here:-
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
also try this one :-
xda_miniS_LaunchRom
http://rapidshare.com/files/43423464/Xda_MiniS_LaunchROM_v154102.exe
and yes! you can also try Wizard_Love _Rom.
Now,its possible to back up the rom from your friend's phone,but it also have to be CID unlocked first and your device shud also be CID unlocked to flash it from the sdcard (MTTY) method.
pfff (
i've updated the rom with the Wizard_Love_2.26.10.2_WWE_Novii_CF2 and now i have a blue sci-fi splash screen with "AKU 2.3" in the top-right corner..
IPL 2.27
SPL 2.27
GSM 02.25.11
OS 2.26.10.2
same ****
won't boot up
and if i try to format, same error.. Format Failed.. so here i am again
hmmmm,try a Hard Reset,hope it works or try other roms I have posted above.
Do you have any sdcard inserted in the phone right now,take it out before flashing any rom.
koolariz said:
won't boot up
and if i try to format, same error.. Format Failed.. so here i am again
Click to expand...
Click to collapse
dude.. that's what i've been trying hard reseting it.. and i get the same error each time i try it "Format Failed"
no sd inserted.. i took it out a while ago.. cause i read on the forum to flash without it.
i begining to get desperate over here
i'll try other roms..
what else can i do than hope this works
Also take out if any sdcard or mini sd is inserted in the phone before flashing,it also causes this Format Failed problem.
Hi All,
I am new to windows Mob interface and read several threads on how to install cooked roms.
I have 1.48 ROM on my HTC HD2 Leo and need to upgrade it to 1.66.
Can someone please guide me through in how to go about it or post the link (if i have missed any) of any thread that has the tutorial?
Most of the threads talk about flashing a cooked rom but i simply want 1.48 migrated to 1.66?
Any pointers be appreciated.
the process is the same for cooked or official.
is there an upgrade for your phone? you failed to mention is it provider locked?
1 - instal hspl2
2 - run the 1.66 .exe
3 - done.
if you have a provider locked phone, and have the correct update, you can skip step 1, if you have a rom unlocked phone (not network unlocked) then get the htc wwe 1.66 .exe and also skip step 1.
read the stikies for how to do it,. but really all you do is run the progs, press ok when it says.
Hey thanks Sam.
My phone is not SIM LOCKED, tht implies i need not install any HSPL/HSPL2.
All I need to do is ,
1. Download the 1.66 ROM
2. Active Sync my phone
3. Run the exe downloaded.
4. Hard Reset my phone.
Please correct me if i am wrong anywhere!
oops675 said:
Hey thanks Sam.
My phone is not SIM LOCKED, tht implies i need not install any HSPL/HSPL2.
Click to expand...
Click to collapse
It ony implies it, it doesn't confirm it.
sim lock and rom lock are unconnected.
If you sim unlocked it yourself, by buying/getting a code, then the rom is still provider locked.
If the phone came sim unlocked, then it is a good bet it is rom unlocked too.
All I need to do is ,
1. Download the 1.66 ROM
2. Active Sync my phone
3. Run the exe downloaded.
4. Hard Reset my phone.
Please correct me if i am wrong anywhere!
Click to expand...
Click to collapse
yep, thats right. Because you are flashing over usb, it wont affect the SPL, but it will change the radio, so if you want a different radio, you will need to do that afterwards.
Thanks for the info.
My phone was unlocked when it came and was not any provider locked.
All i am looking for is a higher ROM version. Wann try HTC Leo with 1.66 ROM.
Bingo.....
I have upgraded it to 1.66. Thanks for your help
Mods can close this thread if required
I'm sick and tired of not having tethering or custom alerts, so I want to install a custom rom on my surround. I'm trying to downgrade my SPL to 1.52 so I can install HSPL, but I can't find a TELUS one anywhre.
The only one I have seen is Ansar's, but his links are dead. I can't post the links yet as i don't have 10 posts.
Does anyone know of where I can get the stock TELUS 1.52 SPL from, or where I can get Ansar's?
Thanks in advance!
I have two Telus Surrounds and I used this rom from Cingular to roll back the spl so that I could unlock it with DFT HSPL Version 3, and then you can load any custom rom you want. If you can't load the rom you might have to use the gold card with a memory stick.
http://www.filefactory.com/file/b48...S_1.03.502.07_5.51.09.06_22.30.50_RELEASE.exe
http://forum.xda-developers.com/showthread.php?t=1597837
CrazyTegger said:
I'm sick and tired of not having tethering or custom alerts, so I want to install a custom rom on my surround. I'm trying to downgrade my SPL to 1.52 so I can install HSPL, but I can't find a TELUS one anywhre.
The only one I have seen is Ansar's, but his links are dead. I can't post the links yet as i don't have 10 posts.
Does anyone know of where I can get the stock TELUS 1.52 SPL from, or where I can get Ansar's?
Thanks in advance!
Click to expand...
Click to collapse
http://dl.vmall.com/c0m2gktk1f
mcsc said:
I have two Telus Surrounds and I used this rom from Cingular to roll back the spl so that I could unlock it with DFT HSPL Version 3, and then you can load any custom rom you want. If you can't load the rom you might have to use the gold card with a memory stick.
http://www.filefactory.com/file/b48...S_1.03.502.07_5.51.09.06_22.30.50_RELEASE.exe
http://forum.xda-developers.com/showthread.php?t=1597837
Click to expand...
Click to collapse
I tried that one but it said invalid vendor id. I assumed that was because I had a Telus phone and not a Cingular one.
I should mention that I'm running 7.8 with bootloader 4.22.2250.0(129185) and firmware 2250.21.40200.661
ofIIns and
jimmy110 said:
link
Click to expand...
Click to collapse
I was successfully able to download and install the rom onto my phone. Now it's readying SPL 1.4.2250.2(113577) and then tried to install RSPL, but the phone would not reboot. I tried resetting the phone as some others indicated, but to no avail.
I then upgraded the phone to NODO using cab sender successfully and tried to RSPL, again the phone wouldn't reboot after completion.
Any ideas?
CrazyTegger said:
I was successfully able to download and install the rom onto my phone. Now it's readying SPL 1.4.2250.2(113577) and then tried to install RSPL, but the phone would not reboot. I tried resetting the phone as some others indicated, but to no avail.
I then upgraded the phone to NODO using cab sender successfully and tried to RSPL, again the phone wouldn't reboot after completion.
Any ideas?
Click to expand...
Click to collapse
Great, now I can't even upgrade my phone using zune or cab sender anymore... I'm stuck on NODO.
Does anyone have the STOCK Telus ROM, and not the modified one like the one provided?
yup I have it
CrazyTegger said:
Great, now I can't even upgrade my phone using zune or cab sender anymore... I'm stuck on NODO.
Does anyone have the STOCK Telus ROM, and not the modified one like the one provided?
Click to expand...
Click to collapse
I am uploading it now
Hold that thought...got a free file host that doesn't suck? if not PM me I will stick it on my private FTP
rob243 said:
I am uploading it now
Hold that thought...got a free file host that doesn't suck? if not PM me I will stick it on my private FTP
Click to expand...
Click to collapse
PM Sent.
CrazyTegger said:
I was successfully able to download and install the rom onto my phone. Now it's readying SPL 1.4.2250.2(113577) and then tried to install RSPL, but the phone would not reboot. I tried resetting the phone as some others indicated, but to no avail.
I then upgraded the phone to NODO using cab sender successfully and tried to RSPL, again the phone wouldn't reboot after completion.
Any ideas?
Click to expand...
Click to collapse
Telus rom is a test rom
you flash telus just to take its touch driver and radio
then you flash default shipped rom (delete SPL_Signed.nbh from shipped rom to save the drivers you got from telus)
then you can go with spl tools
thnx
jimmy110 said:
Telus rom is a test rom
you flash telus just to take its touch driver and radio
then you flash default shipped rom (delete SPL_Signed.nbh from shipped rom to save the drivers you got from telus)
then you can go with spl tools
thnx
Click to expand...
Click to collapse
When you say Flash Default Shipped ROM, are you meaning the TELUS one, or the Cingular one?
I then update using RUU or GoldCard?
CrazyTegger said:
When you say Flash Default Shipped ROM, are you meaning the TELUS one, or the Cingular one?
I then update using RUU or GoldCard?
Click to expand...
Click to collapse
The Default rom that you can name it shipped is Cingular
u use TELUS ROM when you have a trouble with touch driver ( like lock screen bug ) , or when u have trouble in call transmission driver ( making , reciving call problems )
note: u can't flash telus rom with goldcard method else you have a security unlocked bootloader !!
u can flash TELUS ROM with rom utility that come with it
after you take benefit of flashing telus, u cannot go with it, u have to return to Cingular one, note: delete SPL_signed.nbh from Cingular Rom to save drivers that u installed from TELUS, then you go with spl tools
sorry for my bad english
jimmy110 said:
The Default rom that you can name it shipped is Cingular
u use TELUS ROM when you have a trouble with touch driver ( like lock screen bug ) , or when u have trouble in call transmission driver ( making , reciving call problems )
note: u can't flash telus rom with goldcard method else you have a security unlocked bootloader !!
u can flash TELUS ROM with rom utility that come with it
after you take benefit of flashing telus, u cannot go with it, u have to return to Cingular one, note: delete SPL_signed.nbh from Cingular Rom to save drivers that u installed from TELUS, then you go with spl tools
sorry for my bad english
Click to expand...
Click to collapse
I don't quite understand. My phone was bought for, and is on the TELUS network. I had upgraded it to 7.8 using cab sender, but really wanted some features (Wifi Tethering, Custom Alerts), so I tried the custom ROM route.
The only thing I've been able to successfully install on it is the TELUS Test ROM, and upgrade it to NODO using Zune (Mango updates failed - I think because it wants a newer firmware, which I have the cab files, but they fail installing)
The Telus Test ROM that I had downloaded uses firmware 22.50.09.10402.661 and bootloader: 1.4.2250.2 (113577).
If I try to install RSPL/HSPL right now, the phone does not restart after completion, thus never gets into RSPL mode to do HSPL.
I recall trying to use RUU to put on Cingular ROM, however it always failed, I believe saying that Vendor ID is invalid.
I'm really frustrated with this, but I don't know how to move forward to install RSPL/HSPL.
CrazyTegger said:
I don't quite understand. My phone was bought for, and is on the TELUS network. I had upgraded it to 7.8 using cab sender, but really wanted some features (Wifi Tethering, Custom Alerts), so I tried the custom ROM route.
The only thing I've been able to successfully install on it is the TELUS Test ROM, and upgrade it to NODO using Zune (Mango updates failed - I think because it wants a newer firmware, which I have the cab files, but they fail installing)
The Telus Test ROM that I had downloaded uses firmware 22.50.09.10402.661 and bootloader: 1.4.2250.2 (113577).
If I try to install RSPL/HSPL right now, the phone does not restart after completion, thus never gets into RSPL mode to do HSPL.
I recall trying to use RUU to put on Cingular ROM, however it always failed, I believe saying that Vendor ID is invalid.
I'm really frustrated with this, but I don't know how to move forward to install RSPL/HSPL.
Click to expand...
Click to collapse
steps to solve all of your problem
cus your device originally on telus network , you cannot install Cingular while you have locked bootlooader
solution :
1- search in forums about , unlocking boot loder
2- unlock your bootloader ( you know that your bootloader is unlocked when u see on the top of your screen , "security unlocked" when you enter the boot screen (4 colored screen)
3- install Cingular ROM and you will succeed in that after u unlock your bootloader\
4- using spl tools now u can unlock spl to get HSPL
5- install cerebellum 7.8 ROM that will find all features enabled on it ( internet sharing , etc)
and you don't need zune update anymore
note: you will find it hard to unlock your bootloader but it worth try
search in other devices forums , all are same
jimmy110 said:
steps to solve all of your problem
cus your device originally on telus network , you cannot install Cingular while you have locked bootlooader
solution :
1- search in forums about , unlocking boot loder
2- unlock your bootloader ( you know that your bootloader is unlocked when u see on the top of your screen , "security unlocked" when you enter the boot screen (4 colored screen)
3- install Cingular ROM and you will succeed in that after u unlock your bootloader\
4- using spl tools now u can unlock spl to get HSPL
5- install cerebellum 7.8 ROM that will find all features enabled on it ( internet sharing , etc)
and you don't need zune update anymore
note: you will find it hard to unlock your bootloader but it worth try
search in other devices forums , all are same
Click to expand...
Click to collapse
I was under the impression that installing RSPL/HSPL was used to unlock the bootloader. Is this something different entirely?
CrazyTegger said:
I was under the impression that installing RSPL/HSPL was used to unlock the bootloader. Is this something different entirely?
Click to expand...
Click to collapse
RSPL/HSPL is unlock bootloader not deeply enough to allow you to change the hole operator ROM , (change from telus to cingular)
you have to full unlock bootloader
jimmy110 said:
RSPL/HSPL is unlock bootloader not deeply enough to allow you to change the hole operator ROM , (change from telus to cingular)
you have to full unlock bootloader
Click to expand...
Click to collapse
Are there any good keywords I can use? unlock bootloader htc surround isn't working for me.
CrazyTegger said:
Are there any good keywords I can use? unlock bootloader htc surround isn't working for me.
Click to expand...
Click to collapse
search for unlock bootloader generally not for htc surround ( surround is poorest forum )
and all are the same way
jimmy110 said:
search for unlock bootloader generally not for htc surround ( surround is poorest forum )
and all are the same way
Click to expand...
Click to collapse
I'm really not finding anything useful here... I see a lot for Android, but nothing for an HTC Windows Phone. Are you referring to an IMEI unlock? ChevronWP7? Unbranding? Interop Unlock? WP7 Root Tools?
Thanks
I've now managed to developer unlock my Surround. What's the next step from here?