keep wifi running in powersave/screenoff? - P3600 General

Hello, is there a way to keep wifi on while device is sleeping?
i use active sync over wifi and i dont receive new mail notifications while screen is in powersave.
i use wm 6.1 coocked. i have seen this behaviour in all roms tried. even original wm5.
tia

Schaps's Advanced Configuration Tool (last versions) in: Menu->Connection settings. I used this once, but battery was dead in short time.

Thanks 4 the info, found it!
However, wifi is still halting when device enter stanby.
I doublechecked settings.
The device got extremly slugish when option is true.
tried reflashing 2 wm6.1 roms but they behaved the same way.
Did i miss something ?
tia

Related

Wifi won't turn on.

Hey guys, I've been having a problem with the wifi on my universal for awhile, it just won't turn on, antenna stays off, no scanning, it's just off.
Going into the Wireless lan settings in the control panel "Wireless LAN OFF" is displayed, click "Turn on WLAN" it thinks for a few moments then returns to off with nothing changed.
Does anyone know if this is fixable? It doesn't appera to be a software issue, as it has continued on 3 diffreent ROMs... so i'm not sure how to proceed
Balur said:
Hey guys, I've been having a problem with the wifi on my universal for awhile, it just won't turn on, antenna stays off, no scanning, it's just off.
Going into the Wireless lan settings in the control panel "Wireless LAN OFF" is displayed, click "Turn on WLAN" it thinks for a few moments then returns to off with nothing changed.
Does anyone know if this is fixable? It doesn't appera to be a software issue, as it has continued on 3 diffreent ROMs... so i'm not sure how to proceed
Click to expand...
Click to collapse
I don't have Universal, But did you test an official rom or a cooked rom ?! because some of the cooked roms don't have the right wifi driver
I don't think its the driver, since 3 different ROMs, and no one else has complained about such thingcs in any of those ROM's, also it does work sometimes but thats maybe 1 in 20 reboots.
Balur said:
I don't think its the driver, since 3 different ROMs, and no one else has complained about such thingcs in any of those ROM's, also it does work sometimes but thats maybe 1 in 20 reboots.
Click to expand...
Click to collapse
i have the same problem...although my universal has an official rom...
but Balur i have another problem please tell me if you have the same thing... sometimes when im lucky and get the wifi on and log into a wifi network sometimes the (new wifi network balloon message) appears 5 to 10 times and other times even after i log into a network i cant use the internet for anything browsin, messenger or anything else....
again that occurs frequently but not all the time....
hope anyone could help...
hi i also have the same problem that sometimes the wifi wont turn on, although i press the wifi button...don#t know why...
i often have to resset and than it works...
Anyone...
Anybody...
we need a solution plz
hello people, fist time poster here. had my uni for about a month now. very useful device, I was loving using the wifi until 10 mins ago when the whole device turned off randomly whilst browsing through wifi. plugged it in to charge, when starting up I get a couple of errors saying certain things won't start. now wifi doesn't start and I get the same problems as others on here. do we have a solution to this?? also, can I actually turn this device off? I've tried holding the power button on for 20+ seconds and had no joy.
Bellers said:
also, can I actually turn this device off? I've tried holding the power button on for 20+ seconds and had no joy.
Click to expand...
Click to collapse
You mean "really" off, like as no battery would be inside?
Nope, you can't
You can switch the active pda part off and set it to silent, but this wouldn't prevent the device from switching back on on phonecalls. Even if you turn off the radio stack it still would power the display's backlight on and show a notifier if a reminder was set up.
Really turning it off is only possible by removing the battery. Yes, it is a windows mobile device.
Concerning your problems after the crash you should be fine by coldbooting after recharging the battery. The latter one often causes some troubles with the Uni.
Balur said:
I don't think its the driver, since 3 different ROMs, and no one else has complained about such thingcs in any of those ROM's, also it does work sometimes but thats maybe 1 in 20 reboots.
Click to expand...
Click to collapse
I had a same problem.
Yep.. I hate this, i have the same problem and i havent found any solutions
WiFi also dead but on a HTC Artemis
Hi Guys,
I have the same problem but on my HTC Artemis aka XDA Orbit. Only occurred when I was flashing with different ROMS. Even when i flashed original ROM still same thing.
I did read on the forum somewhere that the issue was due to the device not having a valid mac address.
Anyone shed any light on this matter?
There are tools out there for other HTC devices to get Wifi back but not sure if they will work on the uni as they dont work for the artemis.
i was able to get my wif working bygoing into the wireless manager then network cards and had to change it so they all were set to connect to the internet
Balur said:
Hey guys, I've been having a problem with the wifi on my universal for awhile, it just won't turn on, antenna stays off, no scanning, it's just off.
Going into the Wireless lan settings in the control panel "Wireless LAN OFF" is displayed, click "Turn on WLAN" it thinks for a few moments then returns to off with nothing changed.
Does anyone know if this is fixable? It doesn't appera to be a software issue, as it has continued on 3 diffreent ROMs... so i'm not sure how to proceed
Click to expand...
Click to collapse
hi @ all
this tread is a bit "past" but now i got the problem mentioned by balur. i used google and the forum search, but i was not able to find a solution. i hope smb. can help me, because i need the wifi on friday!
I solved the problem of Wi-Fi turning off by going to ActiveSync - Connection Settings and enabling "Allow wireless connection on device when connected to the desktop" option.
Wifi Stopped Functioning after flashing Roms
I have had similar wifi problems with my uni,
My uni was working perfectly for a long while when using "Tomal's 7.7" with Radio 1.18 . . . since then I tried testing with "T-Mobile official ROM AKU3.3" where the flash process when without a hitch.
However I had to change roms again since the T-Mobile rom wasn't very good. but i never got as far as testing the wifi
- - - -
I then tried to flash Tomal's 8.5 Beta, I ran into problems, and was stuck at the bootloader, I tried unlocking the uni with mtty, But i had copied and pasted the commands, and it kept on returning errors, after disconnecting and connecting with mtty again i tried typing in the commands and successfully unbricked my uni.
I attempted to flash Tomal's 8.5 Beta again, this time it worked without a hitch, but then I couldn't turn on wifi.
Wifi cannot be turned "on" from the comm manager or from WLAN. It just remains "off".
So I tried flashing back to Tomal 7.7 and wifi still didn't turn on.
Then I tried flashing Tomal 8.5 Beta again and still no wifi.
I've now tried flashing Radio 1.15 and - still no wifi
- - - -
I havn't the foggiest why wifi isn't functioning at all. Have I messed things up when I copied and pasted the commands into mtty?
Or did flashing the T-Mobile rom cause the problem?
No WIFI
Same here. I've tried 2 different upgrades now and the WIFI simply will not turn on. I've tried all the tricks in this thread, still no WIFI. anyone any ideas?
yason said:
I solved the problem of Wi-Fi turning off by going to ActiveSync - Connection Settings and enabling "Allow wireless connection on device when connected to the desktop" option.
Click to expand...
Click to collapse
Thanks a bunch, this works for me.
Hi, I have a Qtek 9000 and a still have the same problem: Wifi wont´t turn on!
Wifi won't turn on - April 2009
Hi, I have a Qtek 9000 and a still have the same problem: Wifi wont´t turn on!
Any one has the solution.
rntip said:
Hi, I have a Qtek 9000 and a still have the same problem: Wifi wont´t turn on!
Any one has the solution.
Click to expand...
Click to collapse
Welcome to the forum
Try doing a hard reset or flashing another ROM
Good luck and don´t forget to vote!

Socket WIFI Companion - or sth similar...

hi
Im, almost proudly, WiFI Companon user. IMHO program is quite nice and helpful, but I've got a problem with one. The thing is - on the main screen there is buton Network Available - it gives me a list of available networks, also networks I was connected before. I can chose network I wont, connect etc. And it works simply and fine ...till I (or itselfs after e.g. 60sek) turn off (sleep). After waking up it program couldn't connect and list of networks is empty although searching and trying etc. There are networks available for sure but WiFI Companion couldn't "wake up" and work corectly and show it. After ordinery reset everything is good again, but it takes some time (windows loadnig) and its quite annoying. What's wrong with this software? Is it problem with one, or my new rom (1.17.707 10G pdaviet), or maybe me... Or someboudy could recomend me similar (maybe better) software?
have you tried closed the program in settings memory running programs and restarting it?
thanks for rapid answer
of corse I've tried it... No results.... Btw. it's quite impossible to completely close it because its quite deep integrated with system - I can't see it in running programes list when it's closed... It seems that software just don't wake up corectly... Also I've tried few versions - no difference...

when screen turns off wifi disconnects

is it possible to maintain wifi connection even when screen is off...I'm usinsg MSN messenger over wifi and every time that screen turns off messenger goes offline....
same here. its really annoying!
I have been searching for a solution for this problem pretty much since I have owned my device (purchased it in December 2007). Have tried many apps that claim to solve this problem for other devices (but they don't for ours) have tried registry hacks (none worked and almost got stuck having to do a hard reset to set things back to factory default settings) There is unfortunately no solution for this problem so far for our devices. One thing that does work though is listening to internet radio. Even if / when the screen goes out the data connection stays alive because of the constant data transmission. Sorry, to give you the bad news. I have officially given up searching for a solution.
Hve you tried out Advanced Configuration tool and its "keep wifi on while asleep" ?
devirc said:
Hve you tried out Advanced Configuration tool and its "keep wifi on while asleep" ?
Click to expand...
Click to collapse
I can't find that option on v3.3....
Doesn't work either on our devices, I have tried

Bluetooth: Not being able to pair / connect

Hey guys,
I have searched for this problem on the forum but I can't find a solution. The problem I have is that my Bluetooth is not working like I would like it to:
When trying to connect from my TD2 to my pc (xp) / laptop (vista) I get the message:
Cannot connect
Your device hasn't been able to connect with 'pc-name'. De connection failed or the password is incorrect.
(I get it in dutch... so if my translation isn't the same as in the english version you know about it).
When using the pc / laptop to connect to the TD2 I get a screen where I can choose between two bluetooth services:
- Dial-up Connection
- Network Access Point
... These are the only two. When I use my old phone I can also use a Serial port connection (and even a few more).
The purpose of the bluetooth connection is to be able to synchronize my contacts with my Microsoft Outlook 2007.
Can someone please help me with this problem? I have already tried a few things, like soft- and hard reset. Updated the ROM, etc. But it is still not working. The only thing which DOES work is connecting the TD2 to my radio in my car...
Thanks in advance
Hi robje,
Ive got same problem with you.. but i managed to solve it ..try enable receive all incoming beams.. u can find it at all settings --> connections --> beam --> then check " receive all incoming beams"... good luck.....
Thanks for the quick help!
I already enabled this setting, but I still have these problems...
I've got exactly the same problem with my bluetooth,are you still using the stock ROM? I've currently got energyrom's standard2.5 installed so I thought that it maybe WinMob 6.5... My wife's phone is fine and she's using the stock ROM. I'm going to go back to HTC's stock ROM, so I'll give you another update after I've done this...
One note to add.. I've seen that on my older Diamond, the bluetooth COM ports menu shows "New outgoing port", whereas my new Diamond2 shows nothing on the same menu...
Update... I've flashed my Diamond2 back to the original HTC ROM and bluetooth is now working correctly. So it looks as though the problem is probably with WinMob 6.5...
Can anyone confirm this at all???
I think I am just using the Stock ROM (as I haven't installed any other). I am also using WM 6.1... as 6.5 is not yet available for the TD2 (if I am correct)...
Robje113 said:
I think I am just using the Stock ROM (as I haven't installed any other). I am also using WM 6.1... as 6.5 is not yet available for the TD2 (if I am correct)...
Click to expand...
Click to collapse
The retail version isn't but a lot of the ROMs on here have been done with beta versions of 6.5 (mines on build 23016)...
Anyway,I've flashed back to my cooked ROM and bluetooth still isn't working correctly. I've been messing around with the "advanced configuration tool" and found that OBEX was disabled. However once I turned this on, it still wouldn't work correctly...
Yeah I also found the OBEX using Advanced Config. But that didn't seem to matter... I hope anyone knows a solution for this, because it's really annoying! I have contacted the HTC Helpdesk... but didn't get much help. After giving all details about the problem they send me a manual of how to turn on the bluetooth radio on a mobile device :|...
Have you tried reflashing with the latest update from the HTC website?
This problem is getting weirder... I've now found that I can send files from my TD2, it's just the recieving of them that won't work. So I think it must be a possible compatibility issue between WinMob 6.5 & the older version on my TD...
Has anyone got an idea to solve this problem...?
No intention of being a smartass though...
Have you checked the box "visible"?
magnus66 said:
No intention of being a smartass though...
Have you checked the box "visible"?
Click to expand...
Click to collapse
Hey Magnus,
I do have checked that box and it's visible. I have done all there can be done (the easy way) on the TD2, but all settings are correct. I can also see a list of available bluetooth services on the phone, which also describes the one I need. But when I then try to connect my pc with my phone, I can only choose on my pc between:
- Dial-up Connection
- Network Access Point
Only those 2... when there are much more available according to the list on the phone...
Have you tried to connect to your "old phone" as you mentioned?
Sending receiving between those phones

Battery improvement by putting data connection auto-off in standby

Hello,
As I have always done in my previous HTC models (Touch, Diamond, HD), I have set up the registry key HKLM/Drivers/BuiltIn/RIL/EnableDeactivatePDP to 1.
This allows to automatically turn data connection off when the phone enters into standby mode.
The problem is that, with my HD2, the connection goes off correctly but activesync is unable to automatically synchronize with the exchange server while the screen is off.
I have tried different ROMS and different radios. All with the same issue.
It always worked with my previous HTCs.
Has anybody a solution to this issue?
Thanks!
Carlos
No idea bro, I dont sync with exchange so i wouldn't know, anyways, I did not knew that registry key, is great!, thanks for the info, try asking under general>networking forums... they may help a little bit more.

Categories

Resources