Database Users

cook your own rom = no sync

installed a cook your own rom of 2003 the other day and after a few syncs active sync now doesn't detect the xda at all, the xda thinks theres a usb connection but active sync can't see it, anyone have any ideas on how to fix this
i've already tried reinstalling the HTC dock

Hi, yesturday i faced the same problem, after a soft reset everything is ok now.

that fixed it, silly thing

I have the same problem with active sync. I did a soft reset and it does work. . . but the screen on my Siemens SX56 comes out of the soft reset with HTC SAT running. It is a blank screen with a couple of rectangles. If I close this out then active sync stops working.
Any ideas?
Eric

Make sure you delete your old partnership in ActiveSync. May be too obvious, but not always.

ech56 said:
I have the same problem with active sync. I did a soft reset and it does work. . . but the screen on my Siemens SX56 comes out of the soft reset with HTC SAT running. It is a blank screen with a couple of rectangles. If I close this out then active sync stops working.
Any ideas?
Eric
Click to expand...
Click to collapse
Delete the stk.lnk from your startup folder and the annoying HTCSAT will no longer be an issue. You dont need this to use your device. Just causes problems for people. Try it. Also, see my post about your ring volume problem. http://www.xda-developers.com/forum/viewtopic.php?t=2205

s200 won't boot into windows anymore

hi,
i recently wanted to simply restart my qtek s200 (g3), it stops at the blue windows mobile boot screen and just hangs and does nothing (i've waited for hours).
I am not using any mods, simply the original rom/software. The only thing extra installed is 3rd party software and the home screen from the new htc touch (i've have been using it for some time now, and yes, i have been able to reboot several times during that period).
I have no idea why it isn't working anymore since I have been using it in an ordinary fashion and have not installed any software lately...
What I have tried so far:
- soft reset
- removing battery, sd card, sim card
- hard reset is impossible due to the fact that my comm button no longer functions.
Any ideas how I can get this phone to boot in windows again?
If there is no "normal" way, then a hard reset would also work for me as the phone contains no important data.
Let me know if you need more info.
Thanks!

thierry86 said:
hi,
i recently wanted to simply restart my qtek s200 (g3), it stops at the blue windows mobile boot screen and just hangs and does nothing (i've waited for hours).
I am not using any mods, simply the original rom/software. The only thing extra installed is 3rd party software and the home screen from the new htc touch (i've have been using it for some time now, and yes, i have been able to reboot several times during that period).
I have no idea why it isn't working anymore since I have been using it in an ordinary fashion and have not installed any software lately...
What I have tried so far:
- soft reset
- removing battery, sd card, sim card
- hard reset is impossible due to the fact that my comm button no longer functions.
Any ideas how I can get this phone to boot in windows again?
If there is no "normal" way, then a hard reset would also work for me as the phone contains no important data.
Let me know if you need more info.
Thanks!
Click to expand...
Click to collapse
Since no hard reset is available... try removing the battery for the whole night.
If you do manage to get to windows then watch out for the startup folder, you're probably overloading the memory at startup.(htc home and psxut eat a lot at startup and windows as well)

i have removed the battery, sim and sd, and just left it there the whole night, but it still won't go further than the windows boot screen...
any suggestions ?
is is possible to do a hard reset by connecting it to usb and enter the bootloader somehow ? if yes, how ?
thanks!

hi,
have you tryed entering bootloader by the normal process?
"Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camera + Soft Reset, then release soft reset and keep pressing camera button till appear the Boot Loader.)"
regards

yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...

thierry86 said:
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
Click to expand...
Click to collapse
Okay then there is still hope.. When you have connected the device run an opdate tool like the NVID WM5 Rom.. that should work as a hard reset..

are there any working links available for this ? rapidshare seems to have disabled this...
thanks!

thierry86 said:
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
Click to expand...
Click to collapse
As long as you are able to enter bootloader then you can flash it with any old prophet rom. I had the same issue after installing WM6 rom. I used a Spanish rom on wiki to bring it back and then installed WM6 VII touch. So far it has worked well for a week.

HTC 6tab Home screen killed my 818pro!!!!!!
Here is what happened a few days back. My 818pro (aka prophet) suddenly heat up while not in use 3 days ago. I thought it was caused by the hot weather in my country (I was driving with aircond in full blast). The heating up eventually go away. Then 2 day later, after I put down a call, my phone just frozen / hung. Hence, I do a soft reset & guess what It never recovered & stop at the black screen with the dopod logo while restarting. Some service centre I visited told me that the main memory chip need replacement & reflash!!! I can't even see the window screen. I have use the HTC 6tab for 2 months & I am very sure it's the culprit here. Hopefully you are not having the same problem like me
Try plug in the ac charger before u do soft reset. My phone need it in order to restart after soft reset (after I started using the HTC 6tab Home Screen).
That is before my phone die yesterday

my HD froze, hard reset not working

Hi all, first time poster long time browser I checked the wiki and did a search but couldn't find a similar post. Here goes..
Yesterday i tried to connect to this protected wifi at a coffeeshop, but my HD did not manage to connect even after entering the network password. In the end it froze. The home screen was showing, i could feel the vib when pressing the screen, but no action happened. I did a soft reset, but that didnt make a difference... nothing working still, while it is still trying to connect to wifi.
Then I first did one hard reset. I managed to get to the screen where i am asked to touch the screen in order to configure the device. While i could feel the vib, nothing happened. I did a second hard reset, ended up at the same screen, but this time there is no vib when pressing the screen... and still nothing is happening. Same situation when doing a third hard reset.
I am lost for ideas.... Have anyone of you ever experienced something similar and what did you do to resolve it? Or have anyone any suggestions as to what I should try next??

Very bad dude,
what you can do (i dont know if this will work).....Flash your original rom again. it is a kind of a hard reset, but maybe this will work.
can you boot to boatloader (three color screen), and see the text USB when connected to pc?

Hi Kadir,
thanks for your answer.
I am trying to flash my rom using the excellent tool Hard-SPL package from OliNex, but to no avail.... i keep getting error message 202 meaning that it can't connect with the device...

This may sound obvious, but just in case... have you tried to remove the battery when the device is turned off? Is the only way to ensure you are fully turning it off, in case you have some kind of 'static' acting up. I had a similar issue on a PDA and also in my notebook, and was solved by removing battery.

hi,
thanks for the advice. I wish this was all it took, but alas no, i am not that lucky. I am starting to think this is a hardware issue....

can you see the 3 color screen?(when phone is off push power on + volume down button and keep volume down pushed).
if yes can you see it you are now in the bootloader. just chech if you see text usb, this means its connected.
and then flash, no 202 anymore.
do not use hard spl if you want HTC to repair your phone(warranty issue)

Don't you have to disable USB connection in ActiveSync too? Or was that just me?

I found the Flash program killed active sync anyway, but you're right all the guides say to disable it.

HD not recognised on any PC

Hi Guys, hopefully someone can help me here it is driving me crazy - well, here is my issue.
Doesnt matter what PC I plug my HD into it doesnt get picked up, i looked in device manager and still nothing. Its like its not connected, but it shows on the phone that it is charging. And does charge.
Can someone please help?
Thanks!

Settings - Connection - USB to PC - uncheck 'enable advanced network functionality'

All that was there is ' Enable faster data synchronization '
No advanced network functionality. Im on Telstra NextG Network Australia with there crappy stock rom if that helps.

I'm looking at a stock Touch HD and you're right- they changed the name of the box. So uncheck 'enable faster data synchronization'.

I did but it is still not working.

I have also done a hard reset and restore to manufacturers default and still not working.

What kind of PC are you using? Is it XP? If so you need to download ActiveSync.

Using XP.. I have downloaded and installed Activesync. It used to be picked up on every pc and suddenly now it doesnt.

Opened Activesync ports in your firewall settings?

Yeah its all fine, its as though the PC doesnt even recognise it. Doesnt show up in Disk Management.

hi lucky
you're already the 3rd one with this problem.
if you plug-in the usb connector, is there a dialog popping up on your hd which let's you choose between synch or hd mode?
if not, welcome to the group of disapointed htc owners.
there is already a thread somewhere about this problem. i have exactly the same, but no one could help me until now.
at least i found a way to flash a rom. the usb connection was working for about 20 minutes. afterwards it broke down again...
try the following:
1. shut down hd
2. remove SD and Sim Card
3. plug in the usb cable
4. do a hard reset by holding vol up and vol down while you press the power button
5. confirm the hardware reset
6. when the hd is booting up again, it will do some kind of customization process. during this process active sync should come up on your pc. cancel the device setup in acive sync and wait until your hd is completely configured.
7. afterwards reconnect the usb cable and active sync should work for a while...
let me know if it helped. i'm still searching for a permanent solution for this problem...

Nope, didnt work at all.
Not even the choice to decide what I want to do pops up on the phone.
Do you think it could be a hardware fault?

I think it is a hardware fault because i did a SPL boot and instead of 'USB' showing in the white box "Serial" did.
It just seems wierd because it was working fine for 2 weeks and then it all the sudden stopped and I did no ROM flashing or anything.

Should I try reflashing my device through the SD card and see how I go from there?

did you try a different cable???
I have about 20 different USB -> mini USB and only about 2/3 of them work with phones !!!

Yeah ive tried all different cables, ive tried ones that work with my diamond but still dosent work with my hd.

luckyluke1137 said:
Hi Guys, hopefully someone can help me here it is driving me crazy - well, here is my issue.
Doesnt matter what PC I plug my HD into it doesnt get picked up, i looked in device manager and still nothing. Its like its not connected, but it shows on the phone that it is charging. And does charge.
Can someone please help?
Thanks!
Click to expand...
Click to collapse
Are you getting anything popping up in device manager when you plug it in, in other words does the list refresh like it has detected a new hardware device or is it completely silent? I have seen it a couple of times where a device gets stuck as being recognized as something else. If the list does scroll (responds to the HD being plugged in) do a screen shot of everything in DM then plug the HD in and compare the lists to see if it is showing up as something else. If so, delete the device then unplug and plug in the HD again and have it reinstall the driver.
Good luck,
Gordo

I did what you said Gordo, and it doesnt show up inDevice Manager. Its as though its not even plugged in but for some reason it still recharges off the USB.

I guess about the only other thing I can think of is to plug it in on another PC and see if that computer tries to load a driver. If it does then it is something strange with your computer. If it doesn't then there is something bad with the USB port on the HD (maybe).
Gordo

Yeah I tried that but still nothing, im sending it back to Telstra, since its within 14 days of me getting it I get a whole brand new one!
thanks for your help guys

Please HELP!!

Hi Guys,
My touch screen and LCD screen NOt working! Phone Switches ON and comes to standby mode. (i hear all the booting dings and dong melodies)
I neeed to take a backup of my device. to do so i thought i'll use my mobiler and see the phone screen through the PC! unfortunately the last time i used i used the phone as the 'storage device' option. so every time i connec the phone to the pc windows open up my phone's storage card.
Is there a possibility i can change this back to active sync without using the phone's screen.
Or are there any other suggestions for me to take a full backup??

This might be overly complicated but all I can think of at the moment is to write a mortscript or something similar, stick on on your SD card and create an autorun on the card to run the script when it's inserted. The script could change the registry key associated with activesync/usb storage when the device is connected.
Yagetme?

You might be able to get it to work if you do a hard reset or perhaps flash another rom, as if I remember correctly, the default connection setting is set to Activesync.
However, if you're planning to solve the touchscreen, LCD problem, try to flash another rom. If that doesn't work, maybe it's a ribbon connection problem? I had a problem similar to this on my Diamond.

well, atm i see alot of ppl haveing problem with the display, dunno why this happens but it does.
my display turns black sometimes, to get it back working i turn out the battery for 10 seks, put it in again, and try to turn device on till it works. i will bring it to the service.
a hardreset won't help u, because ur data will be lost after hard reset.