installed a cook your own rom of 2003 the other day and after a few syncs active sync now doesn't detect the xda at all, the xda thinks theres a usb connection but active sync can't see it, anyone have any ideas on how to fix this
i've already tried reinstalling the HTC dock
Hi, yesturday i faced the same problem, after a soft reset everything is ok now.
that fixed it, silly thing
I have the same problem with active sync. I did a soft reset and it does work. . . but the screen on my Siemens SX56 comes out of the soft reset with HTC SAT running. It is a blank screen with a couple of rectangles. If I close this out then active sync stops working.
Any ideas?
Eric
Make sure you delete your old partnership in ActiveSync. May be too obvious, but not always.
ech56 said:
I have the same problem with active sync. I did a soft reset and it does work. . . but the screen on my Siemens SX56 comes out of the soft reset with HTC SAT running. It is a blank screen with a couple of rectangles. If I close this out then active sync stops working.
Any ideas?
Eric
Click to expand...
Click to collapse
Delete the stk.lnk from your startup folder and the annoying HTCSAT will no longer be an issue. You dont need this to use your device. Just causes problems for people. Try it. Also, see my post about your ring volume problem. http://www.xda-developers.com/forum/viewtopic.php?t=2205
Related
URGENT HELP PLEASE, I DECIDED TO UPGRADE MY IMATE USING THE RUU172126WWE_IMATE APP AND AS IT STARTED I LOST THE SYNC, NOW IT JUST SITS AT THE USB/V1.02 DARK SCREEN, I RESTARTED THE RUU....AGAIN BUT IT JUST SITS THERE...PLEASE HELP URGENTLY
THANKS GRAHAM
just start over the procedure : put the imate in the cradle and run the *.exe from your computer, relax for a couple of minutes (the program needs to find the usb connection) and then you will see on the imate that the upgrade is starting (where the backlight will remain off and there is an orange bar and the % of the upgrade), in this situation the activesync will not recognize the imate, but the program does.
you can also go to the imate support center, some time there is a person available that you can chat to
Thanks, i did try that initially with no luck have just kicked it off again and it has gone further and now apears to be working PHEW!!!!! :lol: does that reload the boot rom and the full windows op sys? will let you know of the outcome...thanks again....
:lol: finally all working ok, just one little funny over the weekend lost all my contacts and calender entries, did a soft reset but no joy. got it all back this morning with a sync. any one seen this before, any ideas?
Thanks for all the help
Hi my phone was playing up the last few days needing reset all the time so I reinstalled the rom and the phone was running great until yesterday I insalled sim city 2000 which worked no probs but I couldnt exit the program so done a soft reset and now all I get is a pure white screen it does nothing at all. any ideas ???
cheers
Also the dpad buttons are getting very hot . its as if the phone is working as when I connect to usb active sync will do its stuff and I can browse the software on the phone using windows. But just cant see anything but a white sceen on the device itself.
Anyone any ideas
Please :?
I tried installing spb pocket plus and, just after it installed, my Wizard didn't seem to be responding so I tried soft resetting it. On booting up it showed the O2 splash screen and then the Windows Mobile screen but nothing else. The screen goes dark as the backlight is turned off but you can still see the Windows Mobile screen showing. Each time I soft reset the same thing happens.
I've tried soft resetting about 4-5 times now and the same thing happens again. I've even taken the battery out and put it back in and the same thing happens. I was going to try reinstalling the O2 XDA firmware but as I can't get the Wizard to connect to ActiveSync I can't do that.
Has anyone got any ideas? At the moment I'm without my phone & all the PDA functions on the phone and I really want it back.
Thanks for any advice.
Matthew
Think you may need to do a hard reset to put it back to it's factory state. Should work then.
Thanks, I'd been trying to do a hard reset but it didn't seem to work - then it occurred to me that I was actually pressing the wrong button to confirm the reset!
Hard reset works and gets it up and running again although, from checking, it seems that there's some problem between sdp pocket plus (3.0.0.3888) as I've now installed that about 3-4 times and each time, after doing a soft reset, the Wizard crashes and won't respond.
I'm not sure exactly why it's happening, the last thing i remember doing before this problem occurred was uninstall some programs, and decrease the text size in settings.
But everytime I power on the handset, it will boot up fine. But then the activesync information screen (the one that shows your recent syncronizations) will pop up, and my phone freezes up right there. It's pretty much unavoidable at this point, everytime I reset my phone its the same problem. I'm able to do a soft reset at this point, but that's pretty much it.
If it's any help, one of the programs I removed was pTravelAlarm (Burr oak software) i got rid of that because i was getting a "Cannot execute \Windows\pTAmgr.exe" Notification Error during startup, which now that I mention it, the error still pops up even after i removed it.
Is there anyway to perform a hard reset without having to be in windows, or connected through activesync?
Or am i pretty much boned at this point.
You don't need or want to be connected to Active sync when doing a hard reset!
Hard reset is pressing both soft keys at the same time as poking the stlus in the soft reset hole. This takes device (after some menu screens) back to the way you got it originally.
Mike
ah, ok, i was under the impression that the "Reset" key was actually on the screen. yes im a silly newbie . Thanks!
tyfin85 said:
ah, ok, i was under the impression that the "Reset" key was actually on the screen. yes im a silly newbie . Thanks!
Click to expand...
Click to collapse
We're all newbies to start with and we're all still newbies with some aspect or other of Hermes or WM5.
Use this thread if you have problems with hard reset.
Mike
I did a hard reset, and its working just fine. Though i do think i'll be updating the ROM, seeing as i've had many problems with the phone freezing up and recycling itself under the OEM ROM. Thanks again
tyfin85 said:
I did a hard reset, and its working just fine. Though i do think i'll be updating the ROM, seeing as i've had many problems with the phone freezing up and recycling itself under the OEM ROM. Thanks again
Click to expand...
Click to collapse
For many freezing up problems see my post on active sync here:
http://forum.xda-developers.com/showthread.php?t=288352
Mike
Hello guys and gals. I messed up the phone again, but this time hard reset is not an option so I need a way to fix it. I installed the activesync killer (I believe that app caused my problems) from here:
http://forum.xda-developers.com/showthread.php?t=386948
At first i thought it worked fine, but then every time i disconnected my phone from the PC the phone froze. I uninstalled it, but the problem was still there.
Today it got even worse. I cannot connect to my PC neither via activesync nor using the x1 as a flash drive. !!!!!!
Has anyone of you encountered such a problem and is there a way to fix this without hard resetting the device. Maybe a way to reinstall the async on the Xperia?
Help pl0x???
did u try resetting it via the small button at the battery?
leobox1 said:
did u try resetting it via the small button at the battery?
Click to expand...
Click to collapse
That is a restart of the phone. A soft-reset. I do it 10 times a day .
Anyone?
(hidden bump)
Ok, i got some development with it. I reinstalled wktask and the freezing is gone. Now the only problem left is that i cannot connect neither with the activesync (the phones says connecting forever), nor with the microSD (the PC says invalid location drive:I). I'm pretty sure i messed up some drivers. Is there a way to reinstall the connectivity drivers?