Database Users

FLASH FAILED

Hello every 1
I am trying to upgrade my Radi STack (RSU)
I have an excutable file with the new RSU. When I ran, it takes me through few steps where at the end my XDA is rebooted and I get a button on my screen that says "Start" to start the upgrade process. When I press it, after few seconds I get a get an error message saying "Falsh Failed". When I press Ok (what else?!), The XDA is rebooted again and the process is repeated. If I do a format for the XDA, things go to normal.
DOes any 1 know what is going wrong here and how to fix this?
THX

Which ROM do you have? Which ROM are you trying to install? Etc.

I have 3.18.04 and R3.23.01 for the RSU and bootloader 5.22
I am trying to install the RSU 4.16
Also, when I have tried to install the XDA speciall ROM, it didn't work where after I see the screen "Upgrading" on my screen and the upgrading window on my computer asking me to wait for about 5 minutes, the activsync link is disconnected.
It is not clear to me what is the problem, is it the ROm, the bootloader or what?

Cannot flash my SPV M650 anymore :(

Hello,
I have an unblocked SPV M560 (HTC3300).
Few weeks ago I have installed the B&B rom with WM6 on it. Now I would like to install the adinfinitum rom (http://www.adinfinitum.fr/wm6_gps_m6...d_and_the_ugly) to solve the GPS problem we can have with the M650 but I cannot flash anymore.
Here are some explanations:
After starting "start_uspl.exe" I get the Linux screen then the RUU application starts on my PC. RUU is trying to connect to the device but after few seconds it displays the error "ERROR[260]: Update error".
After this I tried to restart the pda, wait for Activesync connection and try to restart RUU.
This time RUU can connect, I can see the grey screen on the PDA and it starts updating... but after 2% I get a black screen on the PDA and RUU displays the error "ERROR[270] Update error".
I'm now reading this forum since 2 days and saw that other people already had this problem but I did not find any working solution.
Does anyone of you have an idea of what can I do to solve this problem?s
Thanks in advance for your help.
Alain.

REad this...
Remove sim and mem card from phone use clear storage to clean phone memory then again try start_uspl.exe wait to 100% finsh do not disconect phone and run then romupdateutility i hope that this can help mine problem is resolved and i flash spv m650 many times.

Hi, i have similary problem, when i try re-install WM on my xda orbit 3.15.118 i have alert : flashing error check your update utility..when i try install another WM6 i have alert : error 270:update error
battery full charged
anyone help me ;-)

Hi,
I finally managed to do the update. The only difference is that when RUU has started after getting the black screen I clicked on the cancel button.
After this I let the terminal with this black screen for few minutes (about 5 minutes) and starts again the RUU application.
And this time is works... don't ask my why, maybe it takes some time to the terminal to be ready to accept connections. At least now SPL 1.1 is installed and I can upgrade. My GPS is now working
Thanks
Alain

Spv m650 arte100
when i run the start_uspl.exe i have this window after the run
No Device Connected
Would You like to try copy again?
YES NO CANCEL
boy my SPV is in bootloader mode and i can't riun it in different mode
i have IPL 3.15.0001 and SPL 3.15.0000
What i have to do ???
PLEASE HELP ME

Cant upgrade to cooked roms (have tried no-nonsence 4 and 6)

I have the official HTC_P3300_WWE_3.13.405.1 installed, it was upgraded from wm5 months ago. Everything works as it should, but when I try to install a cooked rom, the scroll bar gets to 3% then the pda flashes off just like it does seconds before it starts installing.
I then get ERROR [270] : UPDATE ERROR. The image file is corrupted. Please check your update Utility.
Click Exit to quit
I have tried both no-nonsence 4 and 6 with the same problem.
What am I doing wrong? Do I need to install USPL or somthing else???

Same here... After 3% the message ERROR [270] is shown...
Anyone...?

http://forum.xda-developers.com/showpost.php?p=4377664&postcount=7

Error Upgrading P3600

Hello,
I Flashed my P3600 starting from WM 5 with Trinity_Rom_NiAl_Build_23504.
It worked but not at all (pine nuts) so I decided to upgrade again.
The second one, the upgrade stopped while he was runnung and I did the recovery procedure as suggested by the upgrade.
Now when I connect in bootloader mode to pc USB connection is activated.
But every rom version i try to flash I got the Message Error[270] Update Error
Ur Image file is corrupted.
The bar % run till 1% and the device swich off immediatly.
In >Bootloader<
TRIN100
IPL-0.50
Trin100
SPL-1.06.0000
Please Help me.
Thank You

msmbrt said:
Hello,
I Flashed my P3600 starting from WM 5 with Trinity_Rom_NiAl_Build_23504.
It worked but not at all (pine nuts) so I decided to upgrade again.
The second one, the upgrade stopped while he was runnung and I did the recovery procedure as suggested by the upgrade.
Now when I connect in bootloader mode to pc USB connection is activated.
But every rom version i try to flash I got the Message Error[270] Update Error
Ur Image file is corrupted.
The bar % run till 1% and the device swich off immediatly.
In >Bootloader<
TRIN100
IPL-0.50
Trin100
SPL-1.06.0000
Please Help me.
Thank You
Click to expand...
Click to collapse
Error may appear due to corrupt image ROM. download the entire RUU and try again.
In General for archive with firmware.

I've already tried with another RUU but it works the same; really it means not to recognize the ROM installed because if I run the utility and click update to read the ROM just installed and the ROM to update, the utility recognizes only the new but not the present ROM.
The first time I ran it, the utility recognized the installed ROM too and it finished well.

msmbrt said:
I've already tried with another RUU but it works the same; really it means not to recognize the ROM installed because if I run the utility and click update to read the ROM just installed and the ROM to update, the utility recognizes only the new but not the present ROM.
The first time I ran it, the utility recognized the installed ROM too and it finished well.
Click to expand...
Click to collapse
Well.
In an active sinc disconnect connection on USB
- Download splxploit_HTC_Trinity
- Unpack and start
- Then stitch...
Should work

[Q] Problems with updating radio

I have problem with updating my Radio
It wil stop at 12%
I've tried to resume it, but it doesn't work
Then I try to hard reset it, but after the hard reset, it will go back to the 3 colours screen anyway.
What to do now?
p.s. I get "Error [302]: update error" everytime

Come on, you got to give a little more information than that. What radio are you upgrading to. Did you rename the the radio file to RUU_Signed.zip did you run as administrator, is your phone charged past 50%, is your radio a .50 and not a .51?