well...as the title already indicates, I am currently locked out of my Touch HD. For some reason throttle lock has picked a pattern after installing version 0.5 which is not similar to the one that I was using. An obvious solution would be to delete lockcode.txt by using ActiveSync, I am familiar with this method. The problem however is that the last time I hooked my phone to my laptop it was set to DISKDRIVE which does not let me enter the phone memory. So my question was if I could maybe force ActiveSync to start somehow, or overwrite throttle lock of if there is an other solution for my problem...
I really don't know what to do anymore and I actually don't want to perform a hard reset. Please help xda
kind regards
Timewise said:
well...as the title already indicates, I am currently locked out of my Touch HD. For some reason throttle lock has picked a pattern after installing version 0.5 which is not similar to the one that I was using. An obvious solution would be to delete lockcode.txt by using ActiveSync, I am familiar with this method. The problem however is that the last time I hooked my phone to my laptop it was set to DISKDRIVE which does not let me enter the phone memory. So my question was if I could maybe force ActiveSync to start somehow, or overwrite throttle lock of if there is an other solution for my problem...
I really don't know what to do anymore and I actually don't want to perform a hard reset. Please help xda
kind regards
Click to expand...
Click to collapse
maybe to install another sync software?? just guessing.. I don't know...
Okay my friend, Here's the solution
remove your mem stick. then the diskdrive mode is disabled and ActiveSync automatically chosen.
theq86 said:
Okay my friend, Here's the solution
remove your mem stick. then the diskdrive mode is disabled and ActiveSync automatically chosen.
Click to expand...
Click to collapse
That did the trick!! thank you very much for your rapid response!!
theq86 said:
Okay my friend, Here's the solution
remove your mem stick. then the diskdrive mode is disabled and ActiveSync automatically chosen.
Click to expand...
Click to collapse
clever thinking
great tip
super vague Subject (by the OP)
theq86 said:
Okay my friend, Here's the solution
remove your mem stick. then the diskdrive mode is disabled and ActiveSync automatically chosen.
Click to expand...
Click to collapse
Very smart and very kind of you to join the forum in order to help him.
This first post of yours was a very helpful one.
Related
27 said:
Munyuk81 said:
O yeah, i like this program that dopod uses, "usb switch" cause it seems that when in serial mode it sync better and connect faster unlike in RNDIS mode. is there anyway to make it permanently in serial mode?
Click to expand...
Click to collapse
Anybody?
Click to expand...
Click to collapse
Is there a way to do this?
I don't recommend doing this, so do a backup first because it can be a pain to undo. Let me know if it works or not.
V
vijay555 said:
I don't recommend doing this, so do a backup first because it can be a pain to undo. Let me know if it works or not.
V
Click to expand...
Click to collapse
Vijay.
I have one instance of USB switch installed.
It temporarily sets the switch to Serial but needs to be re-set after every soft reset.
Does this version make it permanent?
vijay555 said:
I don't recommend doing this, so do a backup first because it can be a pain to undo. Let me know if it works or not.
V
Click to expand...
Click to collapse
This is no different to the version I had installed beforehand.
Is there a way to permanently set it to serial?
???????????????????????????????????????
No idea - it's pulled out of the Tornado rom. I used it once, it screwed my activesync, I never used it again.
I can't really see the benefit of the idea though. RNDIS works well, when it works.
If there's a registry setting that it forces (which it probably does), you could extract it and I could make you a program to make it a permanent setting. But, I'm not trying the program again as it is, because of my previous bad experiences with it.
V
vijay555 said:
I can't really see the benefit of the idea though. RNDIS works well, when it works.
V
Click to expand...
Click to collapse
Exactly, as you say 'when it works' since i installed a new wifi card and started using higher encryption RNDIS no longer works
so the benifit is the fact that i can actually sync with my laptop, which previously i had to either do it server based, of fire up my desktop pc (which i dont really use anymore)
i have had a good search through the registry and not managed to find a key that will permanently set to serial mode
Yes!!! i was having problem with activesync too and this USB Switch solved the problem for me! thanks!!!
Is there anything to do on the computer to get this working?
After I switched my Qtek S200 to serial, a new peripheral was detected... but nothing new with activesync... no sync at all…
In RNDIS mode, it syncs correctly with outlook, but not with my exchange server… and I can not surf the net while connected to usb…
In HLM/Drivers/USB/FunctionDrivers you can find the "DefaultClientDriver = RNDIS". I think here you can change the default setting. (Not tested ...)
I have a Trinity Htc ppc. I'm wondering if is possible to >KILL< automatically activesync on my ppc when i disconnect the cable fron pc.
Thank You.
This is the best ppc forum in the world!
Search the forums for QuickMenu it has an option to close activesync on disconnect works perfectly for me
cornelha said:
Search the forums for QuickMenu it has an option to close activesync on disconnect works perfectly for me
Click to expand...
Click to collapse
thank you. but i don't want to use quickmenu (great program) i'm looking for a script or something similar, or registry tips.....
Thanks...
disconnectwhendone in the registry is set to 1.... there's anyone that know the meaning.... and if i can change?
Thanks
lucausee said:
disconnectwhendone in the registry is set to 1.... there's anyone that know the meaning.... and if i can change?
Thanks
Click to expand...
Click to collapse
Where in the registry did you found this ?
I'll test it then and let you know the results
texarcana said:
Where in the registry did you found this ?
I'll test it then and let you know the results
Click to expand...
Click to collapse
HKCU_Software_Microsoft_Activesync_Disconnectwhendone = 1
Thanks-a-lot
http://msdn2.microsoft.com/en-us/library/aa458005.aspx
This might help...
lucausee said:
HKCU_Software_Microsoft_Activesync_Disconnectwhendone = 1
Thanks-a-lot
Click to expand...
Click to collapse
I tested it with some numbers, but no luck. Too bad
Even if You kill activesync after disconnect (I'm using quickmenu to do this) after some minutes activesync starts again.
Anyone has a solution for this?
bye
Crash - Try this:
http://forum.xda-developers.com/showpost.php?p=1749695&postcount=12
AppSentry
AppSentry was made just for this reason. It can kill activesync and other apps on a regular basis. The link is in my signature.
It doesn't require you to run it, it runs itself. And it does not run in background so takes no memeory when it is not running.
solution?
ASyncKiller
This application allows to kill the ActiveSync process when it's in idle state but it just hold in memory...
http://forum.xda-developers.com/showpost.php?p=2135727&postcount=1
lucausee said:
solution?
ASyncKiller
This application allows to kill the ActiveSync process when it's in idle state but it just hold in memory...
http://forum.xda-developers.com/showpost.php?p=2135727&postcount=1
Click to expand...
Click to collapse
I can approve that. Asynkiller does the job well
hey guys...just looking for some help. its not a big problem but i just got my hands on my HD yesterday and everytime i check whats running in the backround...theres Active Sync.
i close it and check back 2 minutes later and there it is again!
i noticed this on my diamond after i update it with the latest WWE ROM but didn't take to much notice of it because i was giving it to the girlfriend.
is it meant to run in the backround??
i haven't even connected it to the laptop yet
cheers,
Phil
Same problem for me !
eire77 said:
hey guys...just looking for some help. its not a big problem but i just got my hands on my HD yesterday and everytime i check whats running in the backround...theres Active Sync.
i close it and check back 2 minutes later and there it is again!
i noticed this on my diamond after i update it with the latest WWE ROM but didn't take to much notice of it because i was giving it to the girlfriend.
is it meant to run in the backround??
i haven't even connected it to the laptop yet
cheers,
Phil
Click to expand...
Click to collapse
I tried this http://forum.xda-developers.com/showthread.php?t=423540 from the Diamond forum, but it doesn't seem to work.
cheers mate,
i'm gonna give that a go and i'll let you know how i get on
eire77 said:
hey guys...just looking for some help. its not a big problem but i just got my hands on my HD yesterday and everytime i check whats running in the backround...theres Active Sync.
i close it and check back 2 minutes later and there it is again!
i noticed this on my diamond after i update it with the latest WWE ROM but didn't take to much notice of it because i was giving it to the girlfriend.
is it meant to run in the backround??
i haven't even connected it to the laptop yet
cheers,
Phil
Click to expand...
Click to collapse
I have the same on my old device, Mitac Mio A701. This is probably normal for Windows mobile device. Check out this thread too. there are solutions for this...
the most simple and elegant solution:
just add activesync to exclusive list in the task manager...
1. when you'll check and get activesync on (uninvited)
2. go to task manager.
3. Click and hold on the word Activesync and then select from the pop-up "add to exclusive".
4. go to exclusive tab and thick activesync (repllog.exe).
done. worked for me many times (many ROMs)
i've tried this one (thanks to KukurikU) ...and so far so good.
i think its still running in the backround somewhere but i can't see it.
will try the other ones suggested...for a permanent fix later
cheers
eire77 said:
the most simple and elegant solution:
just add activesync to exclusive list in the task manager...
1. when you'll check and get activesync on (uninvited)
2. go to task manager.
3. Click and hold on the word Activesync and then select from the pop-up "add to exclusive".
4. go to exclusive tab and thick activesync (repllog.exe).
done. worked for me many times (many ROMs)
i've tried this one (thanks to KukurikU) ...and so far so good.
i think its still running in the backround somewhere but i can't see it.
will try the other ones suggested...for a permanent fix later
cheers
Click to expand...
Click to collapse
yes you are right, you only prevented the application UI from running, the processes that's related to activesync are still running. there are several of them, so you may only have killed 1 or 2.
i don't understand why you want to kill activesync permanently. how do you sync your contacts and calendars and all that? :S
buggybug0 said:
yes you are right, you only prevented the application UI from running, the processes that's related to activesync are still running. there are several of them, so you may only have killed 1 or 2.
i don't understand why you want to kill activesync permanently. how do you sync your contacts and calendars and all that? :S
Click to expand...
Click to collapse
i don't wanna kill it permanently...i just don't want it running in the backround and the fix that i applied works fine for me but i don't understand why its running??
Kill ActiveSync Process when idle
Please see this...which I believe is an elegant solution to ActiveSync continous running...
http://forum.xda-developers.com/showpost.php?p=2135727&postcount=1
hi guys new to this site. i have seen lots of your threads, looks great.
now i have a problem with my htc hd2...
story:
i have used a site allot too download som pretty cool stuff its called mobile9.
but today i downloaded a new screen lock its called HD2 Mini lock screen, from mobile9. this is a newly develoed software. i download all software by using the phone.
sow when i install the program it asks me if i want to ree-boot the phone for proper install. i do sow and the phone starts up. but the screen lock is the first thing i see. now i haven't given it any password. but to get past it i need some sort of password. i have no idea what to do... help me please
mr.nik89 said:
hi guys new to this site. i have seen lots of your threads, looks great.
now i have a problem with my htc hd2...
story:
i have used a site allot too download som pretty cool stuff its called mobile9.
but today i downloaded a new screen lock its called HD2 Mini lock screen, from mobile9. this is a newly develoed software. i download all software by using the phone.
sow when i install the program it asks me if i want to ree-boot the phone for proper install. i do sow and the phone starts up. but the screen lock is the first thing i see. now i haven't given it any password. but to get past it i need some sort of password. i have no idea what to do... help me please
Click to expand...
Click to collapse
Try this brilliant workaround:
http://forum.xda-developers.com/showpost.php?p=5820300&postcount=162
this is a good way to get around the sceen lock, but i have not
established a partnership between your phone and a Windows PC via active sync
mr.nik89 said:
this is a good way to get around the sceen lock, but i have not
established a partnership between your phone and a Windows PC via active sync
Click to expand...
Click to collapse
sorry to hear that. Can you establish a guest connection with your pc? If so, maybe you can install the original HD2 lockscreen again.
(or do a hard reset.)
how do i establish a guest connection with mi pc?
mr.nik89 said:
how do i establish a guest connection with mi pc?
Click to expand...
Click to collapse
connect to your pc and answer "no" if activesync of mobiledevices thingy ask if you want to establish a partnership
when i connect to my pc it only seys that the device is locked. so i have no opsions.
any new suggestions?
i realy need help with this one
i just hard reset my htc hd2 and now everything is running smooth... thanks for the help
My phone is unaccessible since wrong registry changing. (Black Screen after BIOS Screen) and I want to fix the registry.
Is there any program to access my PDA's registry in my PDA's condition???
NEED HELP, so urgent.
PDA= WM 6.1 pro
Try with the program in the attachement. It can change the registry with activesync.
EmZvr said:
Try with the program in the attachement. It can change the registry with activesync.
Click to expand...
Click to collapse
Hi, EmZvr, thank you for your response and application, I appreciate it much.
Unfortunately it doesn't work because, My PDA could not boot into the OS (it hangs after BIOS Screen) so my PDA has no active partnertship (activeSync) to my PC.
Any Idea?
Hi MyMailx,
i appreciate there would be no possibility to access your device. I think the only way to fix it will be a hardreset.
Bernhard12345 said:
Hi MyMailx,
i appreciate there would be no possibility to access your device. I think the only way to fix it will be a hardreset.
Click to expand...
Click to collapse
Hi Bernhard, Thank you for your reply.
I read mostly the situation like this, performing HardReset is the best solution but I'll try to fix the problem before option HardReset I do, because I really want to save my email and especially my SMS before hardreset. It's worthed more than thousands dollar.
Could it possible through performing bootloader???
Hi,
I don't think that there s any way to get your date. You don't have backups?
I'd lost data soem years ago. Since that day i do daily backups on sd and never lost data again.
good luck anyway
Bernhard
Bernhard12345 said:
Hi,
I don't think that there s any way to get your date. You don't have backups?
I'd lost data soem years ago. Since that day i do daily backups on sd and never lost data again.
good luck anyway
Bernhard
Click to expand...
Click to collapse
Okay Bernhard, I'll try in searching a day again.
unfortunately I don't usually make a backup since the problem has never been happens to me.
By the next day if there is no solution could fix this problem maybe I'll perform a hardreset...
Thank you for having this convenient conversation.
Ciao...