27 said:
Munyuk81 said:
O yeah, i like this program that dopod uses, "usb switch" cause it seems that when in serial mode it sync better and connect faster unlike in RNDIS mode. is there anyway to make it permanently in serial mode?
Click to expand...
Click to collapse
Anybody?
Click to expand...
Click to collapse
Is there a way to do this?
I don't recommend doing this, so do a backup first because it can be a pain to undo. Let me know if it works or not.
V
vijay555 said:
I don't recommend doing this, so do a backup first because it can be a pain to undo. Let me know if it works or not.
V
Click to expand...
Click to collapse
Vijay.
I have one instance of USB switch installed.
It temporarily sets the switch to Serial but needs to be re-set after every soft reset.
Does this version make it permanent?
vijay555 said:
I don't recommend doing this, so do a backup first because it can be a pain to undo. Let me know if it works or not.
V
Click to expand...
Click to collapse
This is no different to the version I had installed beforehand.
Is there a way to permanently set it to serial?
???????????????????????????????????????
No idea - it's pulled out of the Tornado rom. I used it once, it screwed my activesync, I never used it again.
I can't really see the benefit of the idea though. RNDIS works well, when it works.
If there's a registry setting that it forces (which it probably does), you could extract it and I could make you a program to make it a permanent setting. But, I'm not trying the program again as it is, because of my previous bad experiences with it.
V
vijay555 said:
I can't really see the benefit of the idea though. RNDIS works well, when it works.
V
Click to expand...
Click to collapse
Exactly, as you say 'when it works' since i installed a new wifi card and started using higher encryption RNDIS no longer works
so the benifit is the fact that i can actually sync with my laptop, which previously i had to either do it server based, of fire up my desktop pc (which i dont really use anymore)
i have had a good search through the registry and not managed to find a key that will permanently set to serial mode
Yes!!! i was having problem with activesync too and this USB Switch solved the problem for me! thanks!!!
Is there anything to do on the computer to get this working?
After I switched my Qtek S200 to serial, a new peripheral was detected... but nothing new with activesync... no sync at all…
In RNDIS mode, it syncs correctly with outlook, but not with my exchange server… and I can not surf the net while connected to usb…
In HLM/Drivers/USB/FunctionDrivers you can find the "DefaultClientDriver = RNDIS". I think here you can change the default setting. (Not tested ...)
Related
I got my XDA Exec last week and was impressed apart from the speed of the unit when switching screen modes. I thought that the O2 active would be to blame, so found out how to stop it running, and voila my Exec was instantly faster.
After further reading I found that a hard reset and selecting corp (or corporate) mode would install the bare minimum, so I decided to try this to see if it was better. Unfortunately, the phone and gprs/3g now do not work, as the settings are not installed. Does anybody know how to set these up? The Exec does appear to be much faster so I would quite like to get it running in corp mode.
Thanks
Allan
AFAIK, Basic mode is identical to Corp mode, except that it does pre-configure the connection settings. The O2 Active interface doesn't appear in Basic mode.
However, I think Basic mode does include an O2 icon in the Start bar and a battery monitor thingy there too. It's relatively easy to stop them appearing by deleting the relevant links from the \Windows\Startup folder though, and then you have a clean Exec like God intended
The one thing did like about corp mode was that it didnt say "running in basic mode" when resetting, and it had a battery monitor on the today screen. But I guess I can live without those...
Allan
Remember: The "Search" button is your friend
SiliconS said:
AFAIK, Basic mode is identical to Corp mode, except that it does pre-configure the connection settings. The O2 Active interface doesn't appear in Basic mode.
Click to expand...
Click to collapse
The Basic mode also uses the O2 Phone Dialer skin, which is removed in the Corp install.
Dave Baumann said:
Remember: The "Search" button is your friend
Click to expand...
Click to collapse
Erm, I have already used the search and couln't find anything thats why i made a new post!
Allan
Dave Baumann said:
SiliconS said:
AFAIK, Basic mode is identical to Corp mode, except that it does pre-configure the connection settings. The O2 Active interface doesn't appear in Basic mode.
Click to expand...
Click to collapse
The Basic mode also uses the O2 Phone Dialer skin, which is removed in the Corp install.
Click to expand...
Click to collapse
Oh. Just tried selecting Corp and did a soft reset and the phone looks exactly the same to me. Ah well. It's not exactly an ugly skin so I don't care if it is the O2 one.
What does the non-O2 skin look like?
allanmb said:
Dave Baumann said:
Remember: The "Search" button is your friend
Click to expand...
Click to collapse
Erm, I have already used the search and couln't find anything thats why i made a new post!
Allan
Click to expand...
Click to collapse
Try clicking that link, it leads you to your answers!
SiliconS said:
What does the non-O2 skin look like?
Click to expand...
Click to collapse
Similar, but less "flashy", but more in-keeping with the default WM5.0 theme.
Doh! Thanks Dave, didnt notice that was a link before!
Is there anything else I would need to setup in corp mode that would otherwise be setup in basic mode? I cant think of anything off-hand.
Also, if you know anything about this it may be useful. I connect to 3g but the connection often hangs. In IE I see either "connecting..." or "locating..." in the status bar and nothing else. The only way to fix this once it gets to this state is to reset the unit. Merely restarting the connection doesnt seem to work. I get similar probs in any prog that uses the 3g connection, they just stop working. (I am in good reception areas too).
Do you think this is a setup issue, a simcard or phone issue? I am inclined to think it might be a simcard issue.
Thanks
Allan
allanmb said:
Doh! Thanks Dave, didnt notice that was a link before!
Click to expand...
Click to collapse
Hehe - No worries.
Is there anything else I would need to setup in corp mode that would otherwise be setup in basic mode? I cant think of anything off-hand.
Click to expand...
Click to collapse
I've just done this myself yesterday, and all the services I've tried appear to be working - I can send and recieve calls, text and use the web. The only thing I've not tried yet is MMS. The only thing missing from the Corp mode that I would like is a decent battery bar, but I'd imagine that I'll be able to find a little utility that will do that.
Also, if you know anything about this it may be useful. I connect to 3g but the connection often hangs. In IE I see either "connecting..." or "locating..." in the status bar and nothing else. The only way to fix this once it gets to this state is to reset the unit. Merely restarting the connection doesnt seem to work. I get similar probs in any prog that uses the 3g connection, they just stop working. (I am in good reception areas too).
Do you think this is a setup issue, a simcard or phone issue? I am inclined to think it might be a simcard issue.
Click to expand...
Click to collapse
To tell you the truth, I don't know. This is the first time I've used a 3G phone myself (been a user of all previous XDA's, none of which were 3G) so I had to get my SIM switched over. All I did notice is that one my account was switched to the new SIM connectivity seemed to be very bad in the 3G areas - I phone O2 about it and they said they had some issues with their network then. That was last week, but now everything seems to be fine.
To you restore your battery meter in corporate mode you need to make sure that batterNFO.exe is here
\Windows\Mobile Solutions\O2ActiveUI\Modules\BatteryNFO\batteryNFO.exe
and makesure that batteryNFO.lnk is here
\windows\startup\batteryNFO.lnk
if anyone needs a copy of the file let me know and I will post a link
If you install the gprs monitor from the o2 app disc, it has a nice little battery info built in to the gprs monitor icon.
Allan
ice_coffee said:
if anyone needs a copy of the file let me know and I will post a link
Click to expand...
Click to collapse
Yes, please - the files haven't been extracted on my XDA since I did a hard reset and started in Corp mode.
Cheers.
Dave Baumann said:
ice_coffee said:
if anyone needs a copy of the file let me know and I will post a link
Click to expand...
Click to collapse
Yes, please - the files haven't been extracted on my XDA since I did a hard reset and started in Corp mode.
Cheers.
Click to expand...
Click to collapse
Im sorry I got it wrong, I thought I had got it because there was an on screen battery indicator in corporate mode, but I have come to realise that it might have been their already (the one next to the wireless manager)
I'm waiting to receive my Jamin and I'd like to know if is it simple to use it as pendrive...
It requires any additional sw or is it a WM5 features?
search for WM5Storage (I think).
WM5torage attached for you.
Thanks!!! ;-)
Koksie said:
WM5torage attached for you.
Click to expand...
Click to collapse
wow thanks this is cool.
Can this be turned on automatically as soon as i plug in the USB cable?
without having to Manually click the WMstorare shortcut?
Nope.
Thanks
Thanks for this util...works great.
does this tool support usb2.0?
I think it does, if the device and the desktop support it. It just enables the USB port of the device to be used without using AS. Since the current devices do not support USB 2.0, we cannot know for sure.
I know theres a million posts about activesync but honestly i've never ran into an error i couldn't solve. Now i'm just stuck.
When i connect my device to USB nothing happens. Windows makes that device connected sound and thats it. Activesync doesn't budge. I've restarted my pc, soft reset my device. Repaired activesync, uninstalled and reinstalled it. Ran that ReSync program several times as well as Activesync Toggle. NOTHING
I changed the USB cable even plugged it into a different port. When i do that windows pops up with that little notification new hardware found. Does its little routine but still... activesync is dead.
What do i do all mighty ones?
------------------------------------------------------------------------------------
Just tried to connect with my laptop and same thing. My brother's wizard connects to my activesync.... Does this mean its time for a hard reset?
What's happen ?
Is Activesync wizard client launching when you connect usb cable ?
Is Activesync server (pc) launching when you connect usb cable ?
Have you removed any notification in notification queue on wizard , with memmaid (or sktools) ?
Is the process repllog.exe is launching when on wizard you connect usb cable ?
elrigolo said:
What's happen ?
Is Activesync wizard client launching when you connect usb cable ?
Click to expand...
Click to collapse
no its not popping up nut its running as shown by task manager.
elrigolo said:
Is Activesync server (pc) launching when you connect usb cable ?
Click to expand...
Click to collapse
no, stays dormant in the taskbar
elrigolo said:
Have you removed any notification in notification queue on wizard , with memmaid (or sktools) ?
Click to expand...
Click to collapse
no
elrigolo said:
Is the process repllog.exe is launching when on wizard you connect usb cable ?
Click to expand...
Click to collapse
its located in the notification que twice., first one doesn't have an argument, second one says AppRunAfterRndisFNDetected.
guess its not detectind Rndis... also when i use softic card export in usb mode, it does connect to the pc as a flash drive. but i removed it thinking it might be the culprit.
You need two repllog notification queue :
1- AppRunAfterRndisFnDetected (you have this one)
2- AppRunAtRs232Detect (you must recreate this one with memmaid or sktools for exemple)
thanks for that info, i just added the 2nd one, i'll try it out when i get home.
also one of the 2repllogs i've got has the argument /sched /remote /h thursday, august 03, 2006 - 8:01:40 should i remove this or leave it?
No you can leave it.
Some news ?
Same thing happened to me. I ended up having to uninstall ActiveSync on the PC, then go to Device Manager and remove the SmartPhone USB driver, reboot - and reinstall. Fixed the problem.
The time before that, I had to hard reset the Wizard when I trashed ActiveSync on the device itself.
elrigolo said:
Some news ?
Click to expand...
Click to collapse
worked like a charm, thank u so much, thought i was due for a hard reset but u were right on the money.
but when i first added the one i was missing i had to switch batteries, when i did that it was gone so i just re-added it and now its still in there.
haven't swapped batteries yet but done a couple of soft resets and its fine.
thanks again!
you're welcome
BTW guys - simular prob here... but I'm not going to hard reset... wondered if there where any simularities ?
http://forum.xda-developers.com/viewtopic.php?p=337673#337673
Terran
I recreated the second one but cannot find this option using memmaid.
1- AppRunAfterRndisFnDetected (you have this one)
to [email protected]
try this it will solve your pb.
Thanks to Big Purple Penguin.
Killer!! Thanks
rubbercow said:
uninstall ActiveSync on the PC, then go to Device Manager and remove the SmartPhone USB driver
Click to expand...
Click to collapse
Sorry to be an absolute dufus, but I can't see the driver in the Device Manager. My activesync just says "Retrieving settings" constantly.
Slave1 said:
rubbercow said:
uninstall ActiveSync on the PC, then go to Device Manager and remove the SmartPhone USB driver
Click to expand...
Click to collapse
Sorry to be an absolute dufus, but I can't see the driver in the Device Manager. My activesync just says "Retrieving settings" constantly.
Click to expand...
Click to collapse
I posted the solution for that problem in:
http://forum.xda-developers.com/viewtopic.php?t=56223
My 1st post gives a cab file, my second post in that topic gives a solution using regedit.
Thanks mate!
Slave1 said:
Thanks mate!
Click to expand...
Click to collapse
you're welcome
elrigolo said:
You need two repllog notification queue :
1- AppRunAfterRndisFnDetected (you have this one)
2- AppRunAtRs232Detect (you must recreate this one with memmaid or sktools for exemple)
Click to expand...
Click to collapse
I got stuck with ActiveSync to. Used MemMaid to change/add this... now it works again...
Thanks !! you saved my day... :lol:
I have a Trinity Htc ppc. I'm wondering if is possible to >KILL< automatically activesync on my ppc when i disconnect the cable fron pc.
Thank You.
This is the best ppc forum in the world!
Search the forums for QuickMenu it has an option to close activesync on disconnect works perfectly for me
cornelha said:
Search the forums for QuickMenu it has an option to close activesync on disconnect works perfectly for me
Click to expand...
Click to collapse
thank you. but i don't want to use quickmenu (great program) i'm looking for a script or something similar, or registry tips.....
Thanks...
disconnectwhendone in the registry is set to 1.... there's anyone that know the meaning.... and if i can change?
Thanks
lucausee said:
disconnectwhendone in the registry is set to 1.... there's anyone that know the meaning.... and if i can change?
Thanks
Click to expand...
Click to collapse
Where in the registry did you found this ?
I'll test it then and let you know the results
texarcana said:
Where in the registry did you found this ?
I'll test it then and let you know the results
Click to expand...
Click to collapse
HKCU_Software_Microsoft_Activesync_Disconnectwhendone = 1
Thanks-a-lot
http://msdn2.microsoft.com/en-us/library/aa458005.aspx
This might help...
lucausee said:
HKCU_Software_Microsoft_Activesync_Disconnectwhendone = 1
Thanks-a-lot
Click to expand...
Click to collapse
I tested it with some numbers, but no luck. Too bad
Even if You kill activesync after disconnect (I'm using quickmenu to do this) after some minutes activesync starts again.
Anyone has a solution for this?
bye
Crash - Try this:
http://forum.xda-developers.com/showpost.php?p=1749695&postcount=12
AppSentry
AppSentry was made just for this reason. It can kill activesync and other apps on a regular basis. The link is in my signature.
It doesn't require you to run it, it runs itself. And it does not run in background so takes no memeory when it is not running.
solution?
ASyncKiller
This application allows to kill the ActiveSync process when it's in idle state but it just hold in memory...
http://forum.xda-developers.com/showpost.php?p=2135727&postcount=1
lucausee said:
solution?
ASyncKiller
This application allows to kill the ActiveSync process when it's in idle state but it just hold in memory...
http://forum.xda-developers.com/showpost.php?p=2135727&postcount=1
Click to expand...
Click to collapse
I can approve that. Asynkiller does the job well
well...as the title already indicates, I am currently locked out of my Touch HD. For some reason throttle lock has picked a pattern after installing version 0.5 which is not similar to the one that I was using. An obvious solution would be to delete lockcode.txt by using ActiveSync, I am familiar with this method. The problem however is that the last time I hooked my phone to my laptop it was set to DISKDRIVE which does not let me enter the phone memory. So my question was if I could maybe force ActiveSync to start somehow, or overwrite throttle lock of if there is an other solution for my problem...
I really don't know what to do anymore and I actually don't want to perform a hard reset. Please help xda
kind regards
Timewise said:
well...as the title already indicates, I am currently locked out of my Touch HD. For some reason throttle lock has picked a pattern after installing version 0.5 which is not similar to the one that I was using. An obvious solution would be to delete lockcode.txt by using ActiveSync, I am familiar with this method. The problem however is that the last time I hooked my phone to my laptop it was set to DISKDRIVE which does not let me enter the phone memory. So my question was if I could maybe force ActiveSync to start somehow, or overwrite throttle lock of if there is an other solution for my problem...
I really don't know what to do anymore and I actually don't want to perform a hard reset. Please help xda
kind regards
Click to expand...
Click to collapse
maybe to install another sync software?? just guessing.. I don't know...
Okay my friend, Here's the solution
remove your mem stick. then the diskdrive mode is disabled and ActiveSync automatically chosen.
theq86 said:
Okay my friend, Here's the solution
remove your mem stick. then the diskdrive mode is disabled and ActiveSync automatically chosen.
Click to expand...
Click to collapse
That did the trick!! thank you very much for your rapid response!!
theq86 said:
Okay my friend, Here's the solution
remove your mem stick. then the diskdrive mode is disabled and ActiveSync automatically chosen.
Click to expand...
Click to collapse
clever thinking
great tip
super vague Subject (by the OP)
theq86 said:
Okay my friend, Here's the solution
remove your mem stick. then the diskdrive mode is disabled and ActiveSync automatically chosen.
Click to expand...
Click to collapse
Very smart and very kind of you to join the forum in order to help him.
This first post of yours was a very helpful one.