Hallo,
sorry for my bad English, i'm from germany.
My XDA-II has crashed and i must flash a new rom.
Bevore the PDA crashed, it runs fine with WM2005-german, Widcomm BT-Stack, Navigon 5. The PDA was connectet with a BT-Headset and a BT-GPS-Mouse with TMC from GNS.
After the Crash i have flash a new ROM, WM6.1-German with 32MB Storage, 32MB Ramdisk, 64MB for Programs. It works fine! The Problem is the MS-BT-Stack. With this Stack i can't use my GPS-Mouse. So i have changed the Stack to the Broadcom Stack. But there is to low Memory, i cant start it.
So i have downgrade to WM2005. Its a german Version. An now the next Problem, i have loosed my widcomm-BT-Stack for WM2005. Helmis-BT-Stack for Himalya WM2k5 is to big. There is enough Memory. And all Links to Buzzdev, with other Versions not work.
I search a widcomm BT-Stack Version 1.5 or 1.6. with install Instruction
Can anybody help me
Thanks
Related
Can somebody be fair to say in which condition they succeed to make it work with XDA II / QTEK 2020. I have tried to install widcomm stack as explained in other thread http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=0
But with 2.2 or 2.06 rom I only get not enough memory when I try to start it.
So which version of Rom, Radio and Extend can be used with widcomm BT stack. and does it really work with HD ipaq BT Headhones ?
Thank you
i dont believe that any of the bluetooth stacks support a2dp which is as far as i know required to get stereo sound to such a headset
Ipaq Bluetooth headphones does work with XDAII
I have made it worked with XDAII, but you have to use either Widcomm stack version 1.0.0.3500 or 1.5.0.2000.
My ROM version is 1.72, Radio 1.17 and my own Customized Ext. ROM. I did try it with 2.2 ROM but the BT stack is a bit unstable (every now and then it reported not enough memory, especially when you have lots of thing loaded on Today screen) so I downgraded back to 1.72.
I also had this headphone worked with PC using IVT Bluesoleil stack.
Thank you I will try to downgrade again to 1.72. rom.
Is it possible to post me the complete reg modification I am not sure that in the thread wher I got the widcomm stack http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=0
it is a complete and I expect to be the reason of the memory trouble ?
Another fact is that I am using a french version of 1.72 ??
Thanks for any help
The complete reg modification is on this page:
http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=50
Cheers,
I finally succeed to install the widcomm stack with Stero Profile . The way I used is :
1) Remove [HKEY_LOCAL_MACHINE\Services\BTIcon]
2) Remove [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Transports\BuiltIn\3]
3) Reset
4) install "Broadcom Widcomm 1.5.0.0801 PPC.cab" which is somewhere in the forum
5) copy all the files of Widcomm 1.5.0.200 in windows directory
6) Install Platformxxx.reg
7) reset
8) Install "Broadcom Corporation BT-PPC AV.cab" included in the file I found in the forum in "Broadcom Corporation BT-PPC AV.zip"
And now I can pair and use HP BT stereo Headphones whitout anyproblem on any version of the Rom.....
Just buttons of the headphones are not working is it the same for all ?
and Headset profile doesn't work anymore whith my BT Headset.
I will try with my BT GPS and BT Stowaway Keyoard and Mouse.
I've got a IMATE JAM with 1.03 Italian ROM
I would like to know if there is a 1.11 rom in italian.
Do you think 1.11 is really better than 1.03?
hi
I have a MDA Compact and I used for long time the same ROM (JAM) as yours, and then I decided to try out the Qtek one (with radio 1.06). That's what I think:
- the qtek rom leave me more free RAM even with full extended rom customization installed
- the jam rom has a fax software that is missing in qtek one, but qtek hase pdf and ppt viewers that are missing in qtek rom
- qtek rom has BIG problem with bluetooth. I mean that if you disable it (by switching on airplane mode or by bluetooth icon and/or by some software as PocketZenPhone) it is NOT sure that you'll be able to switch bluetooth on again, even after a soft reset. You'll need a very annoying hard reset.
About Italian ROM 1.11 I have not found it yet, but I did this:
I got Italian MA_DANG_ITA_10604_119_10500_Ship.EXE , I expanded it in a folder (if you have winrar installed, just right click on EXE file) and then I did the same for MA_Dangaard_WWE_11100_129_11100_Ship. Now take radio_.nbf from WWE_11100 folder and put it in ITA_10604 folder. Find MaUpgradeUt_noID.exe around in the forum, and use this file to upgrade your Magician from ITA_10604 folder. The first time you run it it will take your Magician to serial mode and give and error. Launch a second time and it will work.
Telling the truth, if you think you'll switch on/off bluetooth a lot of time, I don't recommend you this upgrade, also because I've NOT been able to come back to JAM ROM.
Regards,
RiCCiO
Do you think i can upgrade just the 1.11 radio stacks?
I mean to use 1.03 ITA (Imatejam) + 1.11 radio stacks (Qtek).
Is it Possible?
Hello,
I was pleased to hear about the new 5.21 version of TomTom, looking foward to install it on my Magician. But there is a problem i've with that new that's the same like all the older versions. I'm not able to install it on my PPC.
There is no difference installing it by the Tomtom Setup from the Desktop or installing the cabs on the Magician. I'm able to install all modules like PIMaddin, GPS and Today but the Setup hangs while performing the ttn.cab so I have to do a soft-reset. I tried several ROM-versions and did hard-reset my PPC xxx times. Don't know what to do. There is no help from Tomtom or t-mobile. They all say it must be a software problem by the other one. Thank you.
Please help me.
Looking foward for a solution
BugzBunny
TTN 5.xx install solved
Downgraded to 1.06.01 and everything seems to be fine.
Bye
BugzBunny
Werid I am using rom 1.12 and have installed the tomtom updtae 5.21 no issues. Except for wizrd which hangs at maps.
hi guys i'm a newby (this forum is great!)
i'm from Italy
i've a problem for my S100-Jam-Magician smartphone.
The Bluetooth doesn't work...
i tried before to connect a my friend's phone via bluetooth, the magician recognize the phone (i can read the name of the phone in the bluetooth settings) but the communication doesn't work.
i cant't upgrade the phone on clubuimate, (i don't have the time to explain) so i'm here.
now i've bought this GPS receiver (Sirf STAR III) http://www.handnav.co.uk/product_details.php?id=228
and i've installed the tomtom navigator 5 software (it works) with italian Map.
as for the phone The Magician relevate the name of the receiver, but it doesn't work, there are problems and the bluetooth connection go down automatically. (i've tried normal ways e all normal settings combination - port 4 , 5 , but nothing-9
Appears continuosly the message
"Desligue o modo de voo em primeiro lugar!"
i think it's spanish or portoguese, but i don't undestand why, because i have the italian rom. U(maybe because i had installed before another version of tomtom navigator with portoguese map?)
i've read other post about bluetooth but the tools doesnìt work and i haven't founded the .cab file that maybe solve bluetooth problems.
Can you help me ?
i'm in troubles !
SOLUTIONS :
1) some patch to install that resolve bluetooth problems
it should better because the phone works good...
2) upgrade magician ROM
i don't know which is my rom version
during the magician rebooting appear
R 1.05.00 G 1337.39 D 1.06.04 ita
however i think it is old...
with an official (on clubimate) newer version are there bletooth improvings ?
IMPORTANT
a - i'd like a working italian version
b - i have seen the upgrading post for magician and i HAVE NOT UNDERSTOOD ANITHING...because i'm not a tecnich or expert...only a normal user ... forgive me
there is a easier and more detailed tutorial?
is there some italian user that can help me?
my msn accont is [email protected]
thankyou
The ?best? bt patch can be found here: O2 MINI NEW BLUETOOTH STOCK.
http://forum.xda-developers.com/viewtopic.php?t=33532&highlight=magician+stock+bt
Login to be able to download.
Find yourself a rom on the ftp, either shipped-rom (.exe) or image file (.nb1) and give me signal what you've chosen. I'll send you the instructions for the necessary steps.
Cheers, M
Hello!
Before upgrading your Magician, You should test your bt GPS connection with an other little GPS software like cemonitor ( download link--> http://www.gpspassion.com/fr/download.asp?dl=1 )
Try to find your BT GPS com Port normally is com 5. If not I give you a little soft that map the com5 automatically at start. It is "tomtom5patch.exe" that must be on your "\windows\Startup\" folder.
SoftReset your Magician after this install.
In CEmonitor, set the com 5 and look if your GPS communicate.
I forgot to tell you to set the BT GPS on the windows settings, with the correct password. You probably made it before.
Try it and ask again...
nothing to do
the first patch is good but doesn't resolve my problem
that damned write in spanish continues to appaer when i try to make bluetooth work and bluetooth shut down.
the second patch doesn't work, when
i think i have installed a wrong or damnaged software on the PDA in the past that has ruined something...
THANK YOU for the helping,
now i'll try to install a new rom with your help.
have you got any suggestion for the rom to install?
do they work all fine, even in italy? wìhich is the best one in your opinion?
is there the risk to damnage the magician?
There's a 1.12ITA shipped-rom on the ftp under magacian. This is the safest upgrade.
- make a backup of every piece of data you want to keep, especially contacts, calendar, tasks. Everything will be lost & programs need to be reibstalled
- synchronize with outlook via Act.Sync
- Download the ITA1.12 shipped-rom
- execute the downloaded file
- follow instructions on your PC & watch the progress on the magician as well
- when finished, you'll be asked to hard-reset
- hard-reset & enjoy the upgraded magician
- synchronize the outlook data
- reinstall your programs
That's it.
Regards, M
it seems simple...
now i try
grazie !!
thank you all
now al things work perfectly.
You're welcome.
Hi,that message(desligue o modo de....)compare from a few time on my magician.The rom is the same from 8 month,and the messagge compare from 1 month.The only things that I change are the 2 giga sandisk,and I installed 3 different navigator on my device.I don't think the problem comes from rom(1.12 ita),maybe from sd or other navigator?
Hi everybody
Some posts ago I asked questions to find right parameters to connect with my BT 77 bluetooth GPS.
Using VisualGPSce I finally found COM5/38400 as parameters to connect with. Knowing that, I used Via Michelin 4.4 with those parameters and wait ...
Some minutes later I obtained the satellits signals in the GPS test screen of ViaMichelin but after that ViaMichelin got frozen.
I'm near the goal but something is missing.
Thanks for your help.
Appareil QTEK 2020
ROM 1.72.02FRA
RADIO : 1.14.00
PROTOCOLE : 1337.24
EXTROM : 1.72.603
Bluetooth driver Microsoft or Widcomm
I'ts me again
I tried to replace the Microsoft drivers by the Widcomm ones with a .cab found on the net.
1 : Delete of key HKLM\Services\BTIcon to uninstall Microsoft drivers
2 : Install of BluetoothGPS.cab to install Widcomm drivers
It has been great during one hour.
Via Michelin 4.4 was OK with my GPS BT77 on port 7
After that I got "Bttray : "the BT radio failed to turn on due to insufficient driver memory available" and "BTTrayCE BT could not be correctly initialized".
Of course memory is actualy not concerned.
Then it has been impossible to turn bluetooth ON without obtain the message "BTTrayCE BT could not be correctly initialized"
I think the .cab to install Widcomm was not good because during installation I got messages about the fact that e-PocketSetup was not a valid official version.
Is it possible to find a good installation for Widcomm drivers (or others) for Windows CE 2003 ?
The problem is this Microsoft driver for Bluetooth.
How to find another one ?
Thanks