I've got a IMATE JAM with 1.03 Italian ROM
I would like to know if there is a 1.11 rom in italian.
Do you think 1.11 is really better than 1.03?
hi
I have a MDA Compact and I used for long time the same ROM (JAM) as yours, and then I decided to try out the Qtek one (with radio 1.06). That's what I think:
- the qtek rom leave me more free RAM even with full extended rom customization installed
- the jam rom has a fax software that is missing in qtek one, but qtek hase pdf and ppt viewers that are missing in qtek rom
- qtek rom has BIG problem with bluetooth. I mean that if you disable it (by switching on airplane mode or by bluetooth icon and/or by some software as PocketZenPhone) it is NOT sure that you'll be able to switch bluetooth on again, even after a soft reset. You'll need a very annoying hard reset.
About Italian ROM 1.11 I have not found it yet, but I did this:
I got Italian MA_DANG_ITA_10604_119_10500_Ship.EXE , I expanded it in a folder (if you have winrar installed, just right click on EXE file) and then I did the same for MA_Dangaard_WWE_11100_129_11100_Ship. Now take radio_.nbf from WWE_11100 folder and put it in ITA_10604 folder. Find MaUpgradeUt_noID.exe around in the forum, and use this file to upgrade your Magician from ITA_10604 folder. The first time you run it it will take your Magician to serial mode and give and error. Launch a second time and it will work.
Telling the truth, if you think you'll switch on/off bluetooth a lot of time, I don't recommend you this upgrade, also because I've NOT been able to come back to JAM ROM.
Regards,
RiCCiO
Do you think i can upgrade just the 1.11 radio stacks?
I mean to use 1.03 ITA (Imatejam) + 1.11 radio stacks (Qtek).
Is it Possible?
Related
Please help if SX 56 Siemens Upgarde can be used for Qtek 1010.I need to upgarde my Qtek 1010 to WM 2003
Thanks
yes the rom of one Wallaby can be used on any Wallaby device
but make sure you dont upgrade the radeio stack unless you use
the same gsm network that the radiostack from SX 56
which i'm pretty sure is 900/1900
if you dont use that gsm network you have to change
the exe file to zip and copy the nbf fil inside it out and update it
using xdatools
if you just use the selfflash exe then you'll end up with a xda which only work on the US gsm network
SX56 WM2003 update aupgrades the radio stack automatically, so you may not get an option to forego radiostack upgrade
well not sure about the 56 Siemens upgrade
but with the tmobile upgrade i just renamed the extention
to zip and extracted the nbf file as i would have from any other
zip file
it were no problem at all
of cause i dont have a clue about how siemens handled their upgrade
SX56 Upgrade for Qtek 1010
Taimur said:
SX56 WM2003 update aupgrades the radio stack automatically, so you may not get an option to forego radiostack upgrade
Click to expand...
Click to collapse
Taimur,
I did it for my Qtek 1010 (I live in the UAE). You are right, if you run the application SX56 Upgrade it will try to upgrade both RSU and RUU. I didn't want to upgrade Radio Stack. I used WinZip and extracted NK.NBF file, used Jeff's XDATOOLS (available somewhere on this forum) and transferred it to the SD Card. Then safely used Bootloader method to flash the ROM.
I am very very satisfied with the SX56 wm2003 upgrade. Except for the multiple reset bug, I have not come across any other problem, and I don't need to reset the device often. It's quite stable. It is the upgrade that I have stuck with for the longest
By the way, using Activesync method to flash ROM is very dangerous (Thanks to Windows), and I almost killed my Qtek while attempting it once! Thankfully with the help from ntabikha I managed to salvage it and never since used activesync to flash Rom.
hi all ..first you are wonderful for creating this site
thanks for all information
My device is HTC made xda 1 which in Turkey sold by escort computer and they build their cooked rom 3.20.03 eng and radio version 3.25.00 900/1800 freq.
Other than rom ver. it is equal of qtek 1010 .
I want to upgrade rom to win2003 .. when I begin the upgrade by activesync my device automatically soft reset itself and on my pc activesync 3.7 ver. shut itself.
I ve tried 3 times but nothing changed . Can you help me please.
Try it with a lower version of ActiveSync. Like V3.5 or V3.6
Regards
Mark
If your current radio stack works ok I would suggest leaving it alone, if your connection to activesync is likely to fail I suggest you use sd card flashing, much more reliable. If you are upgrading radio stack over activesync and the connection fails, you may end up with a pda but no phone. :shock:
I have tired with activesync 3.5 but also my device soft restarts and connection broken.
How do I use wm2003 by my 128 mb sandik SD card. and install the wm2003 to it with bootloader.??
Please make me understand in detail....
Search the forum for "sd flash rom"
For example the following link: http://forum.xda-developers.com/viewtopic.php?t=3274&highlight=sd+rom+flash
Regards,
Mark
I have a sx56 and I recently updated the rom to 2003 via the kitchen. I now would like to update my radio stack. I don't have an active sync cable so i need to do it through my sd card. Is this possible? Can someone tell me the best RS to use. I also need directions on how to go about downloading and installing the new radio stack. Also is there any way to upgrade to 2003se without active sync. My phone info is as follows:
unlocked AT&T sx 56 used on t-mobile
pw10b1
ROM 4.01.16 ENG
Radio version A.33.02
protocal version 1.3.3
thanks
Why do you want to upgrade your RadioStack? If it´s all working, i would stay....
Anyway, on the FTP are some RadioStacks, that are designed to run directly on your device.
# Extract the downloaded ZIP-File and copy all files to the /Windows directory of your device.
# Copy the RSUpgrade.exe additional to the /windows/startup directory.
# Make an soft reset of your device.
Without ActiveSync, there is no possibility to upgrade to WM2003SE....
Stefan
Thanks for the quick reply. I don't get great signal strength on my phone and figured a new radiostack might help. But before I take chances upgrading, will a new radiostack help with signal strength?
It may help, but it must not.
You have to choose one of the 6.xx Radio Stacks.
If the upgrade fails, your phone might end as paper weight. That's the risc you have to handle with....
Stefan
DON'T TRY TO UPGRADE RADIO STACKS!!! DANGEROUS!!!
Guys, don't even think of it. Today I killed my wallaby. I had a radio 6.24.00 and I wasn't glad because of poor signal strength in places where other phones work great. I downloaded from xda ftp a radio stack upgrade soft to a version 6.25. Followed the instructions and started the procedure. On 60% it said do try again. I tryed and second time it stopped the procedure of upgrade at the very beginning. So, my phone doesn't work any more. I dont know what is that soft for if it kills the wallby phones. I wish I didn't do that.
hi.
I use the programm ozvga to get realvga on the HTC universal.
but everytime I get to the realvga modus pocketmsn disappears. it really does. no hotmail account anymore, no today plugin, no settings. nothing.
when i go back to the normal VGA modus via ozvga it appears again as normal.
I don't know why. so why?
is there a possibility to make it work? tweak, registry?
thx.
do you guys not have the problem or don't use ozvga?
no one an idea?
I can't get ozvga to run properly at all on my MDA at the moment, which ROM are you using?
When I apply OzVGA my icons across the top disappear, and other icons appear oddly (wrong place etc).
Just tried MSN in this screwed-up realVGA mode, the result is
It don't start!
My rom is:
1.20.32 wwe
1.06.00 radio
42.40.P8 Protocol
TMobile EXTRom 1.20.120
hi,
i use the latest english imate rom. but it also works with the german t-mobile rom and the german qtek roms and i guess every rom available.
i downloaded it from the ppc-welt.info forum ( http://www.ppc-welt.info/community/showpost.php?p=605676&postcount=93 ) and put all files but the cab and the programm itself to the windows directory.
than copy the cab to the temp folder and a shortcut of the programm to the starmenu.
then install the cab and go to realvga modus. mine always worked with this.
here is the file:
http://rapidshare.de/files/7212409/welldone.rar.html
I would like to flash my mda vario with the qtek rom, to solve the issue with the device resetting itself due to having a sd card installed, and to generally speed things up etc. I have visited the wizard ftp site on here, and navigated to the qtek folder, but there are about a million files listed. I am currently a UK user running an mda vario with t-mobile. Which file should I use? Once I have the correct file how do I then install it to my device? After the update will I be able to restore my previous files and settings with my SPB backup file?
Thanks!
bump
as a newbie myself maybe i can lend you a hand.
first of all...in order for you to flash your mda to other rom, you need to sim and cid unlock ur phone. then you download the latest ROM with WWE to your desktop.
connect your wizard to your pc via activesync 4.1, make sure your device is fully charge at all time. after you have sim/cid unlock ur phone, soft reset your device. then run the ROM exe file and follow on screen instruction.
before you start unlock and flasing ur phone, please use the search function and try to look for step by step instruction. thats wht i have done for a few days and manage to flash my mda vario with the latest qtek rom and a custom radio rom. cant say how happy i am with the phone now.
This is the latest qtek wwe rom ftp://xda:[email protected]/Wi...digy_2170702_21707102_20710_QTEK_WWE_Ship.exe
with spb backup no you will not be able to do a full restore because it will overwrite the registry etc..
Do a custom backup and tick all boxes except system data