i received a bricked shadow t mobile !! (phoe100) and i m not sure if its sw or hw problem !! if i try to power on i get no reaction at all ! do this phone has special emergency boot mode or something like ? or is it hw problem ?
thx for help
br
Did you charge it first?
tonyc0642 said:
Did you charge it first?
Click to expand...
Click to collapse
yes but it won t charge !
br
1) remove a battery
2) connect device without battery to a charger, or a PC via USB-cable
3) insert a battery
also try
1) remove battery
2) press ans hold a Camera buttin and connect to a PC via usb cable
3) tricolor screen should appear
please feedback
tri color screen
Hello i have a shadow on the Tri Color Screen, how can i flash the firmware to it.
thanks
just download T-Mobile SHadow rom and follow steps. You'll be able to recover your device without problems
ThanKs
I follow the instructions of the menber and was successful. Thanks!
Related
Hello,i try to update my samsung s8530 to latest bada 2.0 with multiloader 5.65 in the middle of whole updaiting proces multiloader shows me some error and just stop working, now phone is dead, no charging, no booting up, no download mode, nothing! My wife have same phone so i get her fully charged baterry,but still not working. Any solution?? (except service)
...so i get her fully charged baterry,but still not working. Any solution?? (except service)
Click to expand...
Click to collapse
As you are sure battery is not the problem, so it could be Bootloader is damaged...
As no Download Mode possible... (only if your Key is damaged... no joke)
So only Samsung Service...
Alternate is only JTAG like this:
http://forum.xda-developers.com/showpost.php?p=13582911&postcount=13
Sorry.
This info is free.
Best Regards
adfree said:
this info is free.
Click to expand...
Click to collapse
:d :d
szymi22 said:
Hello,i try to update my samsung s8530 to latest bada 2.0 with multiloader 5.65 in the middle of whole updaiting proces multiloader shows me some error and just stop working, now phone is dead, no charging, no booting up, no download mode, nothing! My wife have same phone so i get her fully charged baterry,but still not working. Any solution?? (except service)
Click to expand...
Click to collapse
when you're charging the phone, handle the battery and try to start the download mode.
I had the same problem with my S8500 Wave. It would not go to download mode or emit a pixel colour. But try to plug in usb to your pc with Multiloader being open and then try going into download mode or press the key combination and then connect it to pc. Anyone of this should work and another thing,this might be stupid but turn off your lights in your room and them try to go in download mode and if you see the device waking with mild white light it means it can be recovered with anyone of the mentioned above. Good Luck
After i install HSPL4, my phone just vibrate 3 times and never turn on again . Now is ,dead what i can do????? Pleaseee help
Hi guy,
You can try to pull off the battery then connect your phone to usb in your pc (or for charging) and insert just after the battery. Normaly the phone boot in boot screen...
Hope this can help you
giovanni2212 said:
After i install HSPL4, my phone just vibrate 3 times and never turn on again . Now is ,dead what i can do????? Pleaseee help
Click to expand...
Click to collapse
Nothing, it's still dead
manu33xtro said:
Hi guy,
You can try to pull off the battery then connect your phone to usb in your pc (or for charging) and insert just after the battery. Normaly the phone boot in boot screen...
Hope this can help you
Click to expand...
Click to collapse
charging light not working...how to flash bricked phone???
well maybe you have to wait une night without battery. After just insert cable for charging. wait few minutes and after insert battery : if nothing appends :crying:
hope that can help you....
giovanni2212 said:
charging light not working...how to flash bricked phone???
Click to expand...
Click to collapse
OS : Windows 8.1 (With drivers successfully installed ) X64
Also tried on Windows 7 (With drivers successfully installed ) X86
Using SP flash tool
The device had this ROM : A3500HV_A442_01_37_140920_ROW
and it is the same I was trying to flash
Hi all , My lenovo A3500-HV went crazy and I had to re-install the rom ..
but while flashing using SP ( all drivers are OK ) the goddamn cable disconnected at about 15% - 20% from total progress
CURRENT STATE :
DEAD :'(
can't power up , nothing happens after pressing power button
can't go into recovery mode or download mode ( nothing happens when pressing VOL UP & Power , VOL UP & DOWN & Power or any other sequence )
it is not charging when I put it on the charger or the USB
is not being recognized when I plug it in ( see attachments please ) !!
device manager screen shot attached please have a look
-----
any hope it can revive ?? , how ??
or just go to the warranty ( really few days left ) .. note that it was rooted device .. ( ( will they ever detect the root if the device is dead ? ) )
up
up
Help my update
ebram96 said:
up
Click to expand...
Click to collapse
I Have same problem. Did you have ANY SOLVE ?:angel:
I have same problem too,,Did you find any solution??
p.m.6 said:
I have same problem too,,Did you find any solution??
Click to expand...
Click to collapse
Look the device was stuck at boot but showing nothing on screen .. so I waited till it has 0% battery and re-flashed the rom successfully .. if you still having problems text me I may help
i have the samy problem
i have the same problem but i dont know how to fix it
ebram96 said:
Look the device was stuck at boot but showing nothing on screen .. so I waited till it has 0% battery and re-flashed the rom successfully .. if you still having problems text me I may help
Click to expand...
Click to collapse
is it really works? but i cant even see the screen backlight is turned on. was it the same with yours? how would you know when the battery level is 0%?
then after (we believe) the battery level is 0% you just connect your tab to your computer to make it show up with COM X connection, correct?
hope it really works and not a coincident (':
kakung said:
is it really works? but i cant even see the screen backlight is turned on. was it the same with yours? how would you know when the battery level is 0%?
then after (we believe) the battery level is 0% you just connect your tab to your computer to make it show up with COM X connection, correct?
hope it really works and not a coincident (':
Click to expand...
Click to collapse
YES , the tab backlight was off and there was not any sign of it working and then I lost hope and left it for a while and then I tried the charger and it was recharging so I tried flashing and it worked just fine
Lenovo A3500 bricked, "USB device not recognized"
ebram96 said:
YES , the tab backlight was off and there was not any sign of it working and then I lost hope and left it for a while and then I tried the charger and it was recharging so I tried flashing and it worked just fine
Click to expand...
Click to collapse
Lenovo A3500FL_A422 bricked, "USB device not recognized" when connected to windows, could not flash it using SP Flash Tool.
After disconnected the battery, flash process begun and was OK.
Thanks !
i have the same problem as yours
after i disconnect battry and flash rom it gets error while flashing on 20%
what should i do ?
:crying:
error : S_FT_DOWNLOAD_FAILD (4008)
arshiyah53 said:
i have the same problem as yours
after i disconnect battry and flash rom it gets error while flashing on 20%
what should i do ?
:crying:
error : S_FT_DOWNLOAD_FAILD (4008)
Click to expand...
Click to collapse
i'm manage to get on 40%
but it stuck in that.
error : S_FT_DOWNLOAD_FAILD (4008)
show up.
change the cable, change pc to laptop,
noting happen.
any sugestion?
Hi I'm new for this forum II have a lenovo vibe k4 note that will be bricked during upgrade session...I'm already used RR version 5.8.5. when I tried to next update my phone stuck up at and not finish to flash but I'm waiting to long,then my phone has reach a battery low and will it be turn off.I'm try to open but stuck at logo LENOVO.to solved I'm flash a firmware s232 using sp flash tool but I'm worst I have no luck when my phone connect to USB its automatically open up and vibrate when I pressed DOWNLOAD button in sp flash tool.Please help me how to re flash or downgrage my phone when its come like this
PS. Sorry my bad english
Press Download button fist, then connect your phone after. Charging your phone to full, then try again. Maybe you should to change the usb port or download the other rom (I downloaded from firmwarefile.com)
chuate92 said:
Press Download button fist, then connect your phone after. Charging your phone to full, then try again. Maybe you should to change the usb port or download the other rom (I downloaded from firmwarefile.com)
Click to expand...
Click to collapse
Thank you for your time sir but I have no luck when I pressed Download button then connect USB phone to computer its vibrate and screen open lenovo logo display that's why sp flash tool didn't work
jblonz said:
Thank you for your time sir but I have no luck when I pressed Download button then connect USB phone to computer its vibrate and screen open lenovo logo display that's why sp flash tool didn't work
Click to expand...
Click to collapse
Did you install driver for you smartphone? And try this: on flash tool go Options --> option ... --> connection, choose "with battery".
Replace Cable for Mobile not Other Cable
chuate92 said:
Did you install driver for you smartphone? And try this: on flash tool go Options --> option ... --> connection, choose "with battery".
Click to expand...
Click to collapse
Maybe cable didn't work caused cable be used is for jbl.
First install Mediatek USB Drivers and then click on download button and after that connect your phone. And that should help you.
Assuming that your pc has already been installed with mediatek usb drivers,you have to click download first and then connect usb to mobile(must be in shutdown mode) by holding both volume buttons,then after at max 2 min downloading will be done. This process has worked fine with me...hope it helps...
chuate92 said:
Did you install driver for you smartphone? And try this: on flash tool go Options --> option ... --> connection, choose "with battery".
Click to expand...
Click to collapse
I had choose with battery option , latest lenovo usb driver installed then after pressing download and then connecting my phone it does Nothing it shows logo and starts charging in power off mode please do something???????
Waiting for your reply
Did u get it to work
How about now ? Have you found a solution to your problem? I also need the same solution because I can't flash with the error that always appears s_ft_enable_dram_failed.
hello,
my honor note 8 has broken screen (black screen and touch not working) ,is there any method to recover the data from the phone ,phone is not rooted ,boot loader locked and USB debugging/developer mode is not turned OFF.
i know it seems impossible but any small suggestion could help...
Can you conect to the Pc and Backup with Hi Suite?
letschky said:
Can you conect to the Pc and Backup with Hi Suite?
Click to expand...
Click to collapse
not possible ,once you connect to Hi suite you need to press a confirmation box on the phone ,but i can't do that as the screen is black.
hashkan said:
not possible ,once you connect to Hi suite you need to press a confirmation box on the phone ,but i can't do that as the screen is black.
Click to expand...
Click to collapse
Did you find out any way to unlock because i have the same problem