Database Users

Got a bricked X2, please help.

Ok, so i got fed up with my phone freezing so i thought i would get SEUS to
re install the rom, (mr1, mr2 is not available to me yet).
The indicator got to about an inch along when a message popped up saying
update failed.
Now i cannot enter bootloader to try again, the phone will not turn on, SE refuse
to help saying it is not released in the UK so i am not entitled to support.
I have not yet had a reply from where i got it from.
Is there any way to get this piece of junk going again?
Thanks.

Try to charge your battery on another phone / external charger.
I encountered a similar problem when trying to flash the X2. I received the UPDATED FAILED error, pulled out the battery, Volume Down + Power and gave it another try.
SEUS shouldn't brick your phone, maybe it's a problem with your battery.

The battery is at about 80%, i have tried it in my X1 as it is the same battery.
I tried the X1's battery in the X2 as well.
When i press the volume down and power buttons it vibrates for a fraction of a
second and then just stays on a black screen.

Let's try then a forced bootmode connection.
1. Insert the data cable into the phone without the battery plugged in.
2. Open SEUS and go to the connection screen.
3. While the software is searching for the phone, keep VOL DOWN + POWER and insert the battery.
After the phone vibrates, the software should recognize the X2.
This procedure generally applies to dead phones and sometimes works.
Post the result.

Still nothing, i kept the buttons pressed for about 30 seconds, then vista popped up a message 'usb device not recognised' the phone stayed as it did before and SEUS did nothing.

Sadly the support excuse they are using is what a lot of manufacturers do if you are in an area where they don't support it. This is the downside of buying a device on eBay etc. before it is "officially" released in your area. Contact the point of sale and hopefully they can send it in for you. You might have to pay shipping costs.
Leave your battery out and unplugged for an hour and then try again after that to revive it.

I did not even realise it had not been released in the UK, i got it from a UK website.
I am still waiting for them to get back to me, as it is Sunday they won't be getting back to me till Mon Tue i would think.
SE were fast though, less than an hour to reply, about the only credit they get though.
I have had the battery out for more than an hour a few times so that does not work.
Thanks for the suggestions though, keep em coming if there are any more.

WINE GLASS said:
Ok, so i got fed up with my phone freezing so i thought i would get SEUS to
re install the rom, (mr1, mr2 is not available to me yet).
The indicator got to about an inch along when a message popped up saying
update failed.
Now i cannot enter bootloader to try again, the phone will not turn on...
Click to expand...
Click to collapse
The exact same thing happened to me today, but I did not even get the update failed message (but I got the inch )
The phone is now bricked. No bootloader no nothing.

I guess you guys have the Singapore English versions? A lot of those retailers in the UK were getting them through Malaysia and so on. Then selling in the UK but not informing buyers that SE wont support it in the UK yet. It's really sad

It's a French X2, and I got it in France. I think I will have no issue with getting my X2 unbricked (or replaced), SE support is pretty good over here.
But if in the mean time someone has an idea or a trick on how to unbrick a X2 (other than the tips already listed in this thread), I would be happy to test it

HI!!
I have a T3238+ with a K3 Proccessor, I flash it with a wrong ROM, when I try to reflash again the K3Aid tool display the following error message : "Read FTM State Error" after i click the download mode button, Anyone can help me??? thank you!!!

-kOS- said:
HI!!
I have a T3238+ with a K3 Proccessor, I flash it with a wrong ROM, when I try to reflash again the K3Aid tool display the following error message : "Read FTM State Error" after i click the download mode button, Anyone can help me??? thank you!!!
Click to expand...
Click to collapse
Wrong phone, wrong forum, wrong idea.

-kOS- said:
HI!!
I have a T3238+ with a K3 Proccessor, I flash it with a wrong ROM, when I try to reflash again the K3Aid tool display the following error message : "Read FTM State Error" after i click the download mode button, Anyone can help me??? thank you!!!
Click to expand...
Click to collapse
Learn to "Read" and use the "Search" function newb.

Hi!
This has happened to me also. The solution was to connect the original charger (I usually charge from the USB port on my PC).
Try this:
1. Disconnect all cables from phone.
2. Remove battery.
3. Insert battery.
4. Connect original SE charger and charge for 5 minutes.
5. With the charger still connected, press volume down and then power on simultaneously - hold until SE logo appears.
If not working, repeat from step 1 several times (i tried 3 times before it finally worked).
6. Connect PC USB and run SEUS update.
Seems to me like the phone does not always charg from USB, and that when it enters the "black-screen-after-short-vibration-after-power-on"-mode it does not charge while in this mode.

Mod edit: not rom dev related, moved to general

well... when it say update fail but if save the new rom to ur phone then its fine, take the battery out and restart ur phone.. it should load the new OS.. my one says fail everytime.. so no problem for me

Odin flash crash, black screen

My galaxy s was hanging on boot (at the big S logo). This wasn't the first time and last time I had tried everything and reflashed. Yet this time odin crashed (windows gave me the 'Odin.exe stopped working' notification) and my phone powered off...
Now it won't give me anything, not download mode, OS or recovery (screen stays black, not even sure if the phone boots at all, hardware buttons also stay off)
Couldn't find anything usefull, any thoughts?
Cheers

Try the JIG to force it into download mode and try again. If odin crashes again, try flashin within windows safe mode. Sometimes it prevents crashing

mrjraider said:
Try the JIG to force it into download mode and try again. If odin crashes again, try flashin within windows safe mode. Sometimes it prevents crashing
Click to expand...
Click to collapse
Will that force the device to boot too? If thats true I will give it a shot this week, hopefully. See if i can get hold of one somewhere.
Thanks for the quick reply

tinyhitman said:
my phone powered off...
Click to expand...
Click to collapse
I Think this is the problem, you may have tried flashing when you had little battery charge and that will cause serious problems as bootloader would have failed.
your only option would be read the My Android Solutions about Problem:- Cannot enter Download or Recovery Mode

xsenman said:
I Think this is the problem, you may have tried flashing when you had little battery charge and that will cause serious problems as bootloader would have failed.
your only option would be read the My Android Solutions about Problem:- Cannot enter Download or Recovery Mode
Click to expand...
Click to collapse
EDIT: I thought it was weird indeed that my phone powered off, since it had a full/near full battery (at least it told me)
Great thread ! Yet unfortunately none of the steps work for me up untill the JIG, I'll have to get hold onto one or make a homemade one (only got a single micro-usb at the moment, so that'll be a sacrifice) Havn't really got a lot of time on my hands but eventually i'll have to give the JIG a shot.
Realize that it seems like the phone isn't powered at all.
EDIT: no "usb device detected" notifications/sounds in windows when plugged in (for adb)
Also: My volt-o-meter told me that my battery outputted 6+ volts... can't seem to reproduce at the time of writing this though....

tinyhitman said:
EDIT: no "usb device detected" notifications/sounds in windows when plugged in (for adb)
Click to expand...
Click to collapse
could be a USB cable failure (guessing) try
2) Problem:- Cannot connect to PC or Unknown Device, getting Code 43 or any other code or NO response when using USB cable in My Android Solutions

did you tried to remove the battery several seconds holding down the powerbutton and put it back again?
btw i also had issues with a galaxy note and a broken usb cable. screen was black because of an empty battery, you should try an other battery maybe a friends one

Lenovo A3500-HV Bricked while flashing ROM ( Cable disconnected )

OS : Windows 8.1 (With drivers successfully installed ) X64
Also tried on Windows 7 (With drivers successfully installed ) X86
Using SP flash tool
The device had this ROM : A3500HV_A442_01_37_140920_ROW
and it is the same I was trying to flash
Hi all , My lenovo A3500-HV went crazy and I had to re-install the rom ..
but while flashing using SP ( all drivers are OK ) the goddamn cable disconnected at about 15% - 20% from total progress
CURRENT STATE :
DEAD :'(
can't power up , nothing happens after pressing power button
can't go into recovery mode or download mode ( nothing happens when pressing VOL UP & Power , VOL UP & DOWN & Power or any other sequence )
it is not charging when I put it on the charger or the USB
is not being recognized when I plug it in ( see attachments please ) !!
device manager screen shot attached please have a look
-----
any hope it can revive ?? , how ??
or just go to the warranty ( really few days left ) .. note that it was rooted device .. ( ( will they ever detect the root if the device is dead ? ) )​

up

up

Help my update
ebram96 said:
up
Click to expand...
Click to collapse
I Have same problem. Did you have ANY SOLVE ?:angel:

I have same problem too,,Did you find any solution??

p.m.6 said:
I have same problem too,,Did you find any solution??
Click to expand...
Click to collapse
Look the device was stuck at boot but showing nothing on screen .. so I waited till it has 0% battery and re-flashed the rom successfully .. if you still having problems text me I may help

i have the samy problem
i have the same problem but i dont know how to fix it

ebram96 said:
Look the device was stuck at boot but showing nothing on screen .. so I waited till it has 0% battery and re-flashed the rom successfully .. if you still having problems text me I may help
Click to expand...
Click to collapse
is it really works? but i cant even see the screen backlight is turned on. was it the same with yours? how would you know when the battery level is 0%?
then after (we believe) the battery level is 0% you just connect your tab to your computer to make it show up with COM X connection, correct?
hope it really works and not a coincident (':

kakung said:
is it really works? but i cant even see the screen backlight is turned on. was it the same with yours? how would you know when the battery level is 0%?
then after (we believe) the battery level is 0% you just connect your tab to your computer to make it show up with COM X connection, correct?
hope it really works and not a coincident (':
Click to expand...
Click to collapse
YES , the tab backlight was off and there was not any sign of it working and then I lost hope and left it for a while and then I tried the charger and it was recharging so I tried flashing and it worked just fine

Lenovo A3500 bricked, "USB device not recognized"
ebram96 said:
YES , the tab backlight was off and there was not any sign of it working and then I lost hope and left it for a while and then I tried the charger and it was recharging so I tried flashing and it worked just fine
Click to expand...
Click to collapse
Lenovo A3500FL_A422 bricked, "USB device not recognized" when connected to windows, could not flash it using SP Flash Tool.
After disconnected the battery, flash process begun and was OK.
Thanks !

i have the same problem as yours
after i disconnect battry and flash rom it gets error while flashing on 20%
what should i do ?
:crying:
error : S_FT_DOWNLOAD_FAILD (4008)

arshiyah53 said:
i have the same problem as yours
after i disconnect battry and flash rom it gets error while flashing on 20%
what should i do ?
:crying:
error : S_FT_DOWNLOAD_FAILD (4008)
Click to expand...
Click to collapse
i'm manage to get on 40%
but it stuck in that.
error : S_FT_DOWNLOAD_FAILD (4008)
show up.
change the cable, change pc to laptop,
noting happen.
any sugestion?

Bricked my LG L5-E610 or have I?

Hey ^^
I recently tried to install a custom rom on my LG L5-E610 so I rooted the device, unlocked the bootloader and installed CWM Recovery on it. So far so good.
Btw I was going to use this custom rom: http://forum.xda-developers.com/optimus-l3-l5-l7/development/l5-l7-cyanhacker-v2-0-sbp-t3061734
Beeing in CWM I flashed GApps, SuperSU and the rom of course AS WELL AS some sort of baseband (which I think is something that I was not supposed to do as it's not claimed in the custom rom thread)
And now everytime I try to power up the phone this happens: (video on my dropbox) https://www.dropbox.com/s/eifhw0pk1kwz2fd/LG L5 problem.mp4?dl=0
However sometimes after beeing stuck on that screen (and the screen turns off) i can (after pressing the home button) use the phone normally with the custom rom on it. Although sometimes the touchscreen or the speakers won't work.
But usually it's stuck like shown in the video.
I also can't enter CWM Recovery anymore.
Nothing helps so I hope some kind person on XDA can help me
Thanks in advance,
Schubi_1 ^^

Schubi_1 said:
Hey ^^
I recently tried to install a custom rom on my LG L5-E610 so I rooted the device, unlocked the bootloader and installed CWM Recovery on it. So far so good.
Btw I was going to use this custom rom: http://forum.xda-developers.com/optimus-l3-l5-l7/development/l5-l7-cyanhacker-v2-0-sbp-t3061734
Beeing in CWM I flashed GApps, SuperSU and the rom of course AS WELL AS some sort of baseband (which I think is something that I was not supposed to do as it's not claimed in the custom rom thread)
And now everytime I try to power up the phone this happens: (video on my dropbox) https://www.dropbox.com/s/eifhw0pk1kwz2fd/LG L5 problem.mp4?dl=0
However sometimes after beeing stuck on that screen (and the screen turns off) i can (after pressing the home button) use the phone normally with the custom rom on it. Although sometimes the touchscreen or the speakers won't work.
But usually it's stuck like shown in the video.
I also can't enter CWM Recovery anymore.
Nothing helps so I hope some kind person on XDA can help me
Thanks in advance,
Schubi_1 ^^
Click to expand...
Click to collapse
Don't be desperate
You installed the baseband of aidasaidas75. I don't know why he made this new baseband, but several people have passed or are going through this situation you are going through right now. Download this file which contains a tutorial that I did (with videos) and follow in the order. Here is the link to download: http://www.mediafire.com/download/puibfc3chbrw2zs/tutorial.rar

Phone was not found!
Thank you very much
i just have a problem
whenever i try to use kdz updater it says "PHONE WAS NOT FOUND" although i tryed to install all the drivers i could find
does anyone know how to fix this?

Schubi_1 said:
Thank you very much
i just have a problem
whenever i try to use kdz updater it says "PHONE WAS NOT FOUND" although i tryed to install all the drivers i could find
does anyone know how to fix this?
Click to expand...
Click to collapse
Edit: Have you putted the phone in emergency mode?

iTzMeB1tch3s said:
Edit: Have you putted the phone in emergency mode?
Click to expand...
Click to collapse
yes
at least i guess i'm in emergency mode as the screen then turns from the way it looked in the video to gray
but still it doesn't work

Schubi_1 said:
yes
at least i guess i'm in emergency mode as the screen then turns from the way it looked in the video to gray
but still it doesn't work
Click to expand...
Click to collapse
The screen is gray? It should show the LG Logo and a message like "Don't remove the USB cable" or something...
Have u done this procedure? ---> 1st - Remove the battery and insert again | 2nd - Click the Volume Up (or Down, try both and see which one works) button and connect USB cable to PC | 3rd - Open KDZ and flash the stock ROM (or whatever .KDZ file you have for the e610) | 4th - If it shows an error in KDZ like Wparam or Lparam (0) just ignore it and wait till it reaches (100) | 5th - Let the phone reboot... You have to be patient here because it takes a really long time! | 6th - Enjoy your phone

iTzMeB1tch3s said:
The screen is gray? It should show the LG Logo and a message like "Don't remove the USB cable" or something...
Have u done this procedure? ---> 1st - Remove the battery and insert again | 2nd - Click the Volume Up (or Down, try both and see which one works) button and connect USB cable to PC | 3rd - Open KDZ and flash the stock ROM (or whatever .KDZ file you have for the e610) | 4th - If it shows an error in KDZ like Wparam or Lparam (0) just ignore it and wait till it reaches (100) | 5th - Let the phone reboot... You have to be patient here because it takes a really long time! | 6th - Enjoy your phone
Click to expand...
Click to collapse
my phone doesn't show any logos
the moment it turns on the screen the screen just stays as shown in the video
whenever i connect the phone to the computer (whilst pressing both volume up+down) and then start the kdz updater the only thing that shows up is:
PHONE WAS NOT FOUND!
i tried most of the things you suggested but nothing works
i think the problem is that i'm missing some sort of driver as my phone doesn't get detected by the computer as a LG L5 but instead as "android" wich my computer thinks to be a Mass Storage Device.

Schubi_1 said:
my phone doesn't show any logos
the moment it turns on the screen the screen just stays as shown in the video
whenever i connect the phone to the computer (whilst pressing both volume up+down) and then start the kdz updater the only thing that shows up is:
PHONE WAS NOT FOUND!
i tried most of the things you suggested but nothing works
i think the problem is that i'm missing some sort of driver as my phone doesn't get detected by the computer as a LG L5 but instead as "android" wich my computer thinks to be a Mass Storage Device.
Click to expand...
Click to collapse
you have to leave the screen like this:
View attachment 3716606
If you get put in this way, just connect to your PC and have them install the Stock ROM.
Now, if you could not leave it, try other key combinations to try to enter download mode.
do not give up!!!

Phone shows no sign| Seems like a dead phone

So everything was working fine a few minutes ago until i put my oneplus2 in my pocket, after sometime when i removed it there was no sign, nothing seems to work, it wouldn't boot neither into bootloader nor into recovery, and when i charge there is no indication either, anyone knows what would the problem be? or is there any way to make it work?

have you tried to enter QHS HS-USB mode?

lockmunk said:
have you tried to enter QHS HS-USB mode?
Click to expand...
Click to collapse
how to do that?

hold press volume up+volume down and plug in usb cable..see whether it detected something like QHS USB in device manager

lockmunk said:
hold press volume up+volume down and plug in usb cable..see whether it detected something like QHS USB in device manager
Click to expand...
Click to collapse
bro it ain't detecting anything, everything was working fine then how suddenly it looked like it's dead?

Did you have a custom ROM on it? Did you install a custom kernel? Were you tweaking around voltage/CPU etc..values?
Some more information about the "crime scene" would be nice..

rajatdixit said:
Did you have a custom ROM on it? Did you install a custom kernel? Were you tweaking around voltage/CPU etc..values?
Some more information about the "crime scene" would be nice..
Click to expand...
Click to collapse
ok so i had flashed h2os a week ago everything was working fine until yesterday when suddenly it stopped showing signs, neither does it shows charging signs nor does it boots into bootloader or into fastboot mode, i did not tweak anything either, i charged it the whole night but it ain't showing any signs yet, battery was working fine the other day so can it just die so suddenly?

phorcus said:
ok so i had flashed h2os a week ago everything was working fine until yesterday when suddenly it stopped showing signs, neither does it shows charging signs nor does it boots into bootloader or into fastboot mode, i did not tweak anything either, i charged it the whole night but it ain't showing any signs yet, battery was working fine the other day so can it just die so suddenly?
Click to expand...
Click to collapse
may be you should try hard reset.
check if it gets detected by your pc in auto restore tool software. your phone won't show any signs even if it gets detected by your pc in such situation.
http://forum.xda-developers.com/oneplus-2/general/oneplus-solution-hard-bricked-device-t3183449

Aniket_IITM said:
may be you should try hard reset.
check if it gets detected by your pc in auto restore tool software. your phone won't show any signs even if it gets detected by your pc in such situation.
http://forum.xda-developers.com/oneplus-2/general/oneplus-solution-hard-bricked-device-t3183449
Click to expand...
Click to collapse
but the phone is not detected at all