Database Users

XDA II Update Failed and now STUCK

Hi.. I used this program (ISO-8859-1__xda_ii_172187_final) which I downloaded here to update my XDA II and then for some reason, the update failed. I didn't know why then my screen showed "Serial" on top and "v1.06" on the bottom of the screen. Then when I connect it to the cradle, it says "USB" on top and same goes for the bottom. Help me, I can't use my XDA...

just rerun the update

Sir, I can't rerun the update because I'm stuck in the bootloader. To run the update, I need to perform a restart which I am not able to do..

no to run the upgrade all that is needed is connecting the usb as soon as it change from serial to usb or is it the other way around i forget one can just rerun the update
don it a million times that way
windows detect the device as ms usb da device or something and when it's finished with the driver one can run the udate again without any problems

when i tried that i got an error "101" like that.
now i can't even power up my XDA ... can u also help with that? tnx so much.. i think i have charged it long enough.. but it still doesnt go on..

deyrnizeshed said:
when i tried that i got an error "101" like that.
now i can't even power up my XDA ... can u also help with that? tnx so much.. i think i have charged it long enough.. but it still doesnt go on..
Click to expand...
Click to collapse
It is actually the disconnection error
1 - first fully charged battery.
2 - install mobile device center or active sync ( as per your OS )
3 - Enter in to the bootloader mode
4 - connect USB cable with ppc device.
5 - wait for detection of the device
6 - drivers are automatically installed if you are using windows7 it shows
driver installed successfully & device is ready to use.
7 - extract the rom update utility from the posts whichever you like ( remember choose it carefully as per your device )
8 - just double click on upgrade icon in extracted folder and yeah you done.
if still any problem persists then fell free to contact me on [email protected]

I donate 20 pound with paypal to person who help!!!

Hello,i try to update my samsung s8530 to latest bada 2.0 with multiloader 5.65 in the middle of whole updaiting proces multiloader shows me some error and just stop working, now phone is dead, no charging, no booting up, no download mode, nothing! My wife have same phone so i get her fully charged baterry,but still not working. Any solution?? (except service)

...so i get her fully charged baterry,but still not working. Any solution?? (except service)
Click to expand...
Click to collapse
As you are sure battery is not the problem, so it could be Bootloader is damaged...
As no Download Mode possible... (only if your Key is damaged... no joke)
So only Samsung Service...
Alternate is only JTAG like this:
http://forum.xda-developers.com/showpost.php?p=13582911&postcount=13
Sorry.
This info is free.
Best Regards

adfree said:
this info is free.
Click to expand...
Click to collapse
:d :d

szymi22 said:
Hello,i try to update my samsung s8530 to latest bada 2.0 with multiloader 5.65 in the middle of whole updaiting proces multiloader shows me some error and just stop working, now phone is dead, no charging, no booting up, no download mode, nothing! My wife have same phone so i get her fully charged baterry,but still not working. Any solution?? (except service)
Click to expand...
Click to collapse
when you're charging the phone, handle the battery and try to start the download mode.

I had the same problem with my S8500 Wave. It would not go to download mode or emit a pixel colour. But try to plug in usb to your pc with Multiloader being open and then try going into download mode or press the key combination and then connect it to pc. Anyone of this should work and another thing,this might be stupid but turn off your lights in your room and them try to go in download mode and if you see the device waking with mild white light it means it can be recovered with anyone of the mentioned above. Good Luck

[Q] xolo 8x 1000 bricked

hey folks..
today i tried to root my xolo 8x 1000..
with sp flash tools i tried to flash TWRP recovery
something went wrong..
and my mobile is not turning on..
i tried to flash again.
but when im trying to connect my mobile to my pc
it is saying that
"usb not recognized"
please help me

sudharshan said:
hey folks..
today i tried to root my xolo 8x 1000..
with sp flash tools i tried to flash TWRP recovery
something went wrong..
and my mobile is not turning on..
i tried to flash again.
but when im trying to connect my mobile to my pc
it is saying that
"usb not recognized"
please help me
Click to expand...
Click to collapse
Don't worry. Just charge your device overnight and then switch it on. Same thing happend to me and I ran to service center to get it fixed where it was just not charged :silly:
Just do it and follow this guide to root Xolo Hive 8x-1000 How to Root Xolo Hive

sudharshan said:
hey folks..
today i tried to root my xolo 8x 1000..
with sp flash tools i tried to flash TWRP recovery
something went wrong..
and my mobile is not turning on..
i tried to flash again.
but when im trying to connect my mobile to my pc
it is saying that
"usb not recognized"
please help me
Click to expand...
Click to collapse
Hi did you solve the problem as i am facing the same problem now

Tech N You said:
Don't worry. Just charge your device overnight and then switch it on. Same thing happend to me and I ran to service center to get it fixed where it was just not charged :silly:
Just do it and follow this guide to root Xolo Hive 8x-1000 How to Root Xolo Hive
Click to expand...
Click to collapse
Hi ,,i am having the same problem ,,,,when i try to plug the phone it gives usb not recognized ,,,so are you sure its only a charging problem as my phone was 85% charged when this problem happened ,,,kindly advice me

samouha20041 said:
Hi ,,i am having the same problem ,,,,when i try to plug the phone it gives usb not recognized ,,,so are you sure its only a charging problem as my phone was 85% charged when this problem happened ,,,kindly advice me
Click to expand...
Click to collapse
Problem is with USB Port change the port/USB Cable and try again and root now without PC using "kingroot.apk" make sure to turn off wifi/data before rooting. Thanks to @bgos10 for this method.

but its not turning on or charging ,,,,its completely dead and when i plug the usb it immediately gives usb not recognized
---------- Post added at 07:48 PM ---------- Previous post was at 07:43 PM ----------
sudharshan said:
hey folks..
today i tried to root my xolo 8x 1000..
with sp flash tools i tried to flash TWRP recovery
something went wrong..
and my mobile is not turning on..
i tried to flash again.
but when im trying to connect my mobile to my pc
it is saying that
"usb not recognized"
please help me
Click to expand...
Click to collapse
Tech N You said:
Problem is with USB Port change the port/USB Cable and try again and root now without PC using "kingroot.apk" make sure to turn off wifi/data before rooting. Thanks to @bgos10 for this method.
Click to expand...
Click to collapse
but its completely dead and not charging at all and when i plug the usb it immediately gives usb not recognized<<<and i tried it on 2 different pc with different os

Bricked xolo 8x 1000.....
i just cleaned 1st rom & tried to install HIVE rom again,it said installation aborted...
So i just rebooted my phone
the problem is now i haven't any rom or OS in phone,so it just cant start and can't do anything...
I got my mistake and problem, but is there any chance to get my phone back???????

8x 1000 recovery
At first download clockword recovery from xda for xolo 8x 1000
Pur the downloaded file in memory card , not in any folder
Then download mobile uncle tool and install clock word recovery mode
It will change ur recovery mod . then download stock ROM of xolo 8x 1000 from xda
Go to ur phone recovery page install the xolo8x 1000 stock ROM from ur memory card and then switch on ur phone it will work.:good:

Xolo 8x 1000 bricked while SPtool flashing
aniket_here said:
i just cleaned 1st rom & tried to install HIVE rom again,it said installation aborted...
So i just rebooted my phone
the problem is now i haven't any rom or OS in phone,so it just cant start and can't do anything...
I got my mistake and problem, but is there any chance to get my phone back???????
Click to expand...
Click to collapse
did your problem resolved?
mine is also bricked while flashing stock rom.

Hi I can solve the problem just follow it
1) Do not charge the device,if charged then leave it for 2 days (press the power button for 20sec) do not touch the mobile OK
2) after that install the adb drivers try to install from varioussite
3) now take the mobile when the battery is fully drained
4) charge it for 10minutes or 15min
5) after download the so tool and firmwaxdafor xxda
6) now follow the procedure given by xda
7) do not connect the mobile to PC ,connect it after pressing the download button
8)remember device should charged for 10 to 15 minutes
Congrats the device will get sta:laugh:rted

hi,
are you guys still facing issues with your xolo devices ?
If yes then you can download stock rom for xolo devices from following link: http://androidxda.com/download-xolo-stock-rom-model

Bricked
Pls help me:crying:

xolo 8x 1000 clone Hard bricked, dead, not charging, nothing
Ravindra123 said:
Hi I can solve the problem just follow it
1) Do not charge the device,if charged then leave it for 2 days (press the power button for 20sec) do not touch the mobile OK
2) after that install the adb drivers try to install from varioussite
3) now take the mobile when the battery is fully drained
4) charge it for 10minutes or 15min
5) after download the so tool and firmwaxdafor xxda
6) now follow the procedure given by xda
7) do not connect the mobile to PC ,connect it after pressing the download button
8)remember device should charged for 10 to 15 minutes
Congrats the device will get sta:laugh:rted
Click to expand...
Click to collapse
good day, pls my infinix zero, which is a xolo 8x 1000 clone is bricked, long story, i used sp tool, clicked download, plugged in phone, pressed volume, and then the download was 100%, but got a message cant remember the message. tried flashing again with same method but no response. currently the phone does not charge, cant come on, no recovery mode, the only thing is wen plugged to pc, i hear that usb device soun. and i can find the VCOM port stuff in device manager, please i need help

Plzz help me
Tech N You said:
Don't worry. Just charge your device overnight and then switch it on. Same thing happend to me and I ran to service center to get it fixed where it was just not charged :silly:
Just do it and follow this guide to root Xolo Hive 8x-1000 How to Root Xolo Hive
Click to expand...
Click to collapse
I have xolo 8x 1000
so i was trying to flash a stock rom on my xolo
but unfortunately I selected wrong scatter file ie MIcromax a117
then sp flash tool started & red progress bar with 100% appeared then it stopped
and my xolo bricked
but then I selected the correct scatter file now when I am trying to flash it sp flash wont detect at all I mean I wont startup even though my pc alerts me that a device is connected
as vcom driver my phone is connected but I am not getting what to do plzz help me

LENOVO A3000 flash error , dead boot

my device : lenovo tab A3000H , the box says the CPU is MTK8389 , dead boot , cannot power on.
detected in windows as " MTK USB PORT 3" , cannot install DA USB VA COM.
baterry is built in , cannot be de attached without opening inner casing and screws.
- SP Flash Tool v3.1316.0.150 / SP_Flash_Tool_v5.1604
- ROM : A3000_A422_011_022_140127_WW_CALL_FUSE / A3000_A421_000_029_130327_CN_3G by Azam / A1000F_A412_01_23_130822_ROW_USER by Azam
1. i run flashtool , any version is same results
2. i load scatter file : MT6589_Android_scatter_emmc.txt , try few scatter file that available on xda forum
3. i tick marck DA DL Checksum
4. i load FAC IMG file
5. i click DOWNLOAD
6. Flash tool searching , then i connect the Lenovo TAB , at COM3
7. DA Agent running (RED BAR)
8. after 5 seconds idle , pop up shows thats says " BROM ERROR : ENABLE DRAM FAILED (4032) "
also same result with " firmware upgrade ", also with " format all + download"
please help , i am so grateful if someone can give solution

same here

Hello anyone have solution on this? I have same problem

I need help too.. please dear experts..
I flashed my A3000, but it stopped at 87% at stay there all evening ans night. So today I try to switch it on - nothing happens, long pressing buttons: nothing, dead device.
I connected it to PC, and in device manager it shows "unknown device" (not: mt65xx unknown device!) So it seems it is not completely dead!
I try to install the mt65xx driver, but I cant.
So any hint what I can try to revive it? I would apreciate anything very much, that you!
----
EDIT: Windows shows CODE 43 for the A3000. What can I do?

Solved..
I let the battery drain for some day, then after pushing reset button, It starts to load the battery again. Then it repeatly starts to boot every 3 seconds. Switching it off and try to flash it again - bingo! Everything is fine again
biokeks said:
I flashed my A3000, but it stopped at 87% at stay there all evening ans night. So today I try to switch it on - nothing happens, long pressing buttons: nothing, dead device.
I connected it to PC, and in device manager it shows "unknown device" (not: mt65xx unknown device!) So it seems it is not completely dead!
I try to install the mt65xx driver, but I cant.
So any hint what I can try to revive it? I would apreciate anything very much, that you!
----
EDIT: Windows shows CODE 43 for the A3000. What can I do?
Click to expand...
Click to collapse

hi
biokeks said:
I let the battery drain for some day, then after pushing reset button, It starts to load the battery again. Then it repeatly starts to boot every 3 seconds. Switching it off and try to flash it again - bingo! Everything is fine again
Click to expand...
Click to collapse
can you give me link of your rom

Phone shows no sign| Seems like a dead phone

So everything was working fine a few minutes ago until i put my oneplus2 in my pocket, after sometime when i removed it there was no sign, nothing seems to work, it wouldn't boot neither into bootloader nor into recovery, and when i charge there is no indication either, anyone knows what would the problem be? or is there any way to make it work?

have you tried to enter QHS HS-USB mode?

lockmunk said:
have you tried to enter QHS HS-USB mode?
Click to expand...
Click to collapse
how to do that?

hold press volume up+volume down and plug in usb cable..see whether it detected something like QHS USB in device manager

lockmunk said:
hold press volume up+volume down and plug in usb cable..see whether it detected something like QHS USB in device manager
Click to expand...
Click to collapse
bro it ain't detecting anything, everything was working fine then how suddenly it looked like it's dead?

Did you have a custom ROM on it? Did you install a custom kernel? Were you tweaking around voltage/CPU etc..values?
Some more information about the "crime scene" would be nice..

rajatdixit said:
Did you have a custom ROM on it? Did you install a custom kernel? Were you tweaking around voltage/CPU etc..values?
Some more information about the "crime scene" would be nice..
Click to expand...
Click to collapse
ok so i had flashed h2os a week ago everything was working fine until yesterday when suddenly it stopped showing signs, neither does it shows charging signs nor does it boots into bootloader or into fastboot mode, i did not tweak anything either, i charged it the whole night but it ain't showing any signs yet, battery was working fine the other day so can it just die so suddenly?

phorcus said:
ok so i had flashed h2os a week ago everything was working fine until yesterday when suddenly it stopped showing signs, neither does it shows charging signs nor does it boots into bootloader or into fastboot mode, i did not tweak anything either, i charged it the whole night but it ain't showing any signs yet, battery was working fine the other day so can it just die so suddenly?
Click to expand...
Click to collapse
may be you should try hard reset.
check if it gets detected by your pc in auto restore tool software. your phone won't show any signs even if it gets detected by your pc in such situation.
http://forum.xda-developers.com/oneplus-2/general/oneplus-solution-hard-bricked-device-t3183449

Aniket_IITM said:
may be you should try hard reset.
check if it gets detected by your pc in auto restore tool software. your phone won't show any signs even if it gets detected by your pc in such situation.
http://forum.xda-developers.com/oneplus-2/general/oneplus-solution-hard-bricked-device-t3183449
Click to expand...
Click to collapse
but the phone is not detected at all