Database Users

GT540 doesn't boot

Helo,
I've got a big proplem, my GT540 doesn't boot anymore it always freezes when the LG sign appears. I have this proplem since I'd tried to change the statusbar font into whiteby changing the services.jar. Hardreset and KDZ Updater aren't working. And I also tried to change the new services.jar to the old with adb but I don't get root permissions.
My phone runs with 2.1 Eclair.
Thanks for your help,
Lucas

Wait, arent the status bar white by defoult ?

No i don't mean the bar I mean the clock, but do you have any ideas to solve my proplem?

Do The Hard Reset With Press The
Vol Up + Search Key (on the right side of the phome) + home button

When I Trie to do the hardreset it Happens nothing! Is there no other possibillity to reset?

You could try fresh install with KDZ updater, that worked for me when I broked the radio and my network didn't worked. If you have troubles geting in to download mode you could try removing the battery and press volume up + camera + power button Just be carefull! Good luck
Sent from my GT540 using XDA App

I tried this too, but it crashed always after I choose the kdz file
Here is the log file of KDZ Updater, rename it to Fail.log

Luc-As said:
I tried this too, but it crashed always after I choose the kdz file
Here is the log file of KDZ Updater, rename it to Fail.log
Click to expand...
Click to collapse
OK, you could try this :
If you have problems with KDZ_FW_UPD - Download and install from Microsoft two files "MSXML 4.0 SP3 Parser" and "VisualC Redist"
1 LG_Android_Driver Ver 1.0 must be installed
2 In the Device Manager disable LGE Android USB Modem
3 Run Windows Enabler (on Windows 7 as administrator) and left click on the icon in System tray ( it should be ON )
4 Run "KDZ_FW_UPD.exe" (on Windows 7 as administrator)
5 In the "Type" select "3GQCT", then choose the firmware file
6 Expand the window of the KZD flasher ( more options will emerge )
7 In the "PhoneMode" section choose "CS_EMERGENCY"
DIAG - standard flashing mode of ON state
EMERGENCY - in extreme cases!
CS_EMERGENCY - the same thing, CS - crash systems
8 Click "Start update" will process the firmware
You could also disable your anti virus and use only the back USB ports of your PC. Good luck !

Oh THANKS! I love you guy, I thought I killed my brand new mobile!

Luc-As said:
Oh THANKS! I love you guy, I thought I killed my brand new mobile!
Click to expand...
Click to collapse
You are welcomed

hi all!
my phone was root, instant a2sd, then it work very slow, i was factory reset, it worked.
but when i reset it again, and it can not log on. stop at "android" screen log on. In " download mode" ,i update rom again (v20B_00 and CIS V20B_00), some time, done, but not change, it can not log on. stand by at "android" screen.
any body help me? what can i do? any way to factory reset by window? script? els..
ps: it not hard reset, "Volume up + HOME + SEARCH" buttons not work, maybe my phone GT made by LG vietnamese.
IMEI :352***-04-31***3-1
tks for read!

GT540 does not boot
I have followed
I tried this too, but it crashed always after I choose the kdz file
Here is the log file of KDZ Updater, rename it to Fail.log
OK, you could try this :
If you have problems with KDZ_FW_UPD - Download and install from Microsoft two files "MSXML 4.0 SP3 Parser" and "VisualC Redist"
1 LG_Android_Driver Ver 1.0 must be installed
2 In the Device Manager disable LGE Android USB Modem
3 Run Windows Enabler (on Windows 7 as administrator) and left click on the icon in System tray ( it should be ON )
4 Run "KDZ_FW_UPD.exe" (on Windows 7 as administrator)
5 In the "Type" select "3GQCT", then choose the firmware file
6 Expand the window of the KZD flasher ( more options will emerge )
7 In the "PhoneMode" section choose "CS_EMERGENCY"
DIAG - standard flashing mode of ON state
EMERGENCY - in extreme cases!
CS_EMERGENCY - the same thing, CS - crash systems
8 Click "Start update" will process the firmware
BUT I get error:
Upgrade error
Wparam:100
lparam: 4008

try booting and then when it is stuck at the lg logo plug it in to your pc and begin the upgrade in diag mode.
It worked for me when i wiped my phone.

Cant get it to start reloading the firmware
Can you please tell me from where to get the file KDZ_FW_UPD.exe in english I have it in Russian.
I have tried in DIAG mode but failed...
Please help..

The upgrade does not start...
Very GOOD now it did it like this.
Start your phone in recovery. Volume down+camera+power, see if the pc sees the device. Start the update tool max it and select emergency and flash again.
This fixed...
Now I need to add spanish to it. Do you know how??

cmora22 said:
Can you please tell me from where to get the file KDZ_FW_UPD.exe in english I have it in Russian.
I have tried in DIAG mode but failed...
Please help..
Click to expand...
Click to collapse
Download this file http://forum.xda-developers.com/showthread.php?t=812308
and in folder u see the "updater" file. doubleclick and u have the english KDZ version.

Oh. I need this Fail.rar too.
I have the same Problem. Can anybody reupload?
THX

The Updater allways tells me, that the Phone is not found. What should I do?
I have all the drivers installed.
tehbone

tehbone said:
The Updater allways tells me, that the Phone is not found. What should I do?
I have all the drivers installed.
tehbone
Click to expand...
Click to collapse
yeah, i've got the same problem, i don't know what i can do...
Pleaz help us =(
My PC don't see my phone, my phone stay on 'lg' boot, and can't boot on emergency or hard reset... =/
EDIT: i did it!
You only need to desactivate the LG Android USB Modem (i didn't saw 'Modem' on Device Manager, so i could not desactivate it).
If like me you don't see Modem, you will see it during the period of time during which the device is recognized mod download, ie for about 5 seconds after you plugged in...
I hope it will help someone
PS: Sorry for my english..

Look under modem and you see your phone
At property under tab look your com number remember it
Take teraterm create a connection with your phone you can connect it normally
When you are connected write
AT
( if you see nothing go to setting general and activate ''echo typed only'' )
If your getting OK
AT%FRST%
and the phone does a factory reset
( i'm french so i'm sorry for my english )
Sent from my GT540 using XDA App

[Q] A500 - "Android logo" loop

hello everyone ,
my Iconia A500 , just broke down or i don't know exactly what's wrong with it ,
it's rooted stock -ICS-4.0.3 , 6 months ago
and the last thing happened in the past 3-4 days :
1- "Air Playit" was downloaded 2 days ago
2- reading news /Facebook/messenger , occasional games
3- opera browsing
that's it , no physical impacts , nothing abnormal else
now for no reasons , the tablet shut down ..
and stuck on "Android" logo ...and never past that for an hour , then it shut down
any help please with "preserving data"?

I would connect Micro USB cable to PC and device...
and see if PC recognizes device...then if you can see it in ADB or APX mode..
at least you can modify stuff with PC recognizing it..
Maybe take out External SDCARD and click it back in.
try to boot into recovery mode
mess with it when power cord is plugged into it and NOT plugged in
*** IF you are ever are able to enter into a RECOVERY mode, I'd wipe Cache + Dalvik (so it can refresh files and apps) (it doesn't erase anything, settings, apps, etc)
hope you have your CPUID #
Dought this is very helpful, APX mode saved me after my tablet was bricked for 2 months

ktmdave7 said:
1- connect Micro USB cable to PC and device...
DONE
2- see if PC recognizes device...then if you can see it in ADB or APX mode..
at least you can modify stuff with PC recognizing it..
the computer sounds like something plugged over USB however , nothing appear in my computer or device manger
3- Maybe take out External SDCARD and click it back in.
Done
4- try to boot into recovery mode
a dead robot appear with red triangular mark over his chest
5- mess with it when power cord is plugged into it and NOT plugged in
tried both ...nothing
6- *** IF you are ever are able to enter into a RECOVERY mode, I'd wipe Cache + Dalvik (so it can refresh files and apps) (it doesn't erase anything, settings, apps, etc)
how ?
7- hope you have your CPUID #
sorry , but i didn't think i'd need it , since my ONLY thing i'm doing with the tablet is reading news and browsing internet
anyway , how to get it now ?
Dought this is very helpful, APX mode saved me after my tablet was bricked for 2 months
Click to expand...
Click to collapse
help

things been done till now :
1- CPUID extraction
(1) From a PC using Blackthund3rs A500 manager
not readable
(2) From your device using Terminal Emulator App
not accessible
(3) From USBDeview must have previously used the Tab under HC with the PC you're using
only 11 digits were founds under the exact given criteria
(4) From a uid.txt in any Honeycomb-cwm backup in external_sd/clockworkmod/backup/"your_HC_backup" folder
not available
(5) From adb devices if you're running honeycomb
not available
(6) From cwm 1.7.2 via on screen display and a text file - great if you are on ICS already
not accessible
(7) From a working system in /sys/firmware/fuse/acer_cpuid
?!!?
** USB doesn't recognize the device , tried multiple ports , USB 2 , 2.1 and 3 (USB driver installed)
any more ideas ??
---------
2- tried flashing updates stock ICS
((http://forum.xda-developers.com/showthread.php?t=1874345&page=2))
41-203-01-update.zip = failed
41-206-01-update.zip = failed
41-124-01-update.zip
41-125-03-update.zip
both are not downloadable ,,, so please if anyone can upload them somewhere else ??
((http://forum.xda-developers.com/showthread.php?t=1816560))
Acer_A500_1.031.00_WW_GEN1 : http://d-h.st/uAy = failed
---------
3- tried access through these apps
A500 APX Flash Tool = failed (require CPUID)
A500 Manager - Utility Suite for A500 = Failed (can't recognize any sort of communications with the tablet through micro-USB)
===================
Ideas , anybody , help !!!

Acer_A500_1.031.00_WW_GEN1
Acer_A500_1.031.00_PA_CUS1
Acer_A500_1.041.00_WW_CUS1
Acer_AV041_1.054.00_WW_GEN1
all failed !!
come on guys !!

Well I wish that I could help in a way that would let you preserve your data. Hate saying it. It is probably lost. The 'save my data' prerequisite is probably why there are no answers to this point. I won't say that it is impossible, just highly unlikely. Sorry.
So if you get tired of waiting for an answer for that and just want to get your tab up and running I would humbly suggest that you consider these...
http://forum.xda-developers.com/showthread.php?t=1624645
Tons of great information and the support from the OP is legendary.
I think that you will end up at this page...
http://forum.xda-developers.com/showthread.php?t=1751978
This one is not an easy read or an easy process for those who lack Linux experience. But with a little patience you should be fine. Just be sure to read through the first few pages. There's a decent amount of information in that single thread, and not all of it is in the first post.
Once you get through those two threads you will, without a doubt, be able to continue with restoring your tablets software to something useable.
Good Luck.

Dr.GM said:
hello everyone ,
my Iconia A500 , just broke down or i don't know exactly what's wrong with it ,
it's rooted stock -ICS-4.0.3 , 6 months ago
and the last thing happened in the past 3-4 days :
1- "Air Playit" was downloaded 2 days ago
2- reading news /Facebook/messenger , occasional games
3- opera browsing
that's it , no physical impacts , nothing abnormal else
now for no reasons , the tablet shut down ..
and stuck on "Android" logo ...and never past that for an hour , then it shut down
any help please with "preserving data"?
Click to expand...
Click to collapse
I'm in the same boat. The same thing happened to me two days ago. Stock ICS + root are the only mods I've done.
I'm going to finish reading through to see if anything worked. :/
---------- Post added at 03:53 PM ---------- Previous post was at 03:42 PM ----------
In my case, I'm not so interested in preserving any data as I had already relocated everything important to GDrive and my external SD card.
First attempt, I tried booting into recovery which, I'm guessing, tried to grab an update.zip from the SD card that wasn't there. When nothing was found it proceeded to a green android boot screen and then quickly changed to a dead android with a hazard symbol on it. The boot bar below the logo crept slowly for several minutes and then stopped and hung for about an hour until I gave up.
Any quick ways to get me back to a stock blank rom?

ok , i think i'll let go for the data ... although it's VERY annoying -_- considering i did never lose any data since 1990 with dos / windows / symbian , i'm very disappointed with my first experience with Android and Acer ..
anyway here is my thoughts ,
1- first i tried All possible ways for extracting the CPUID in many forums .... except the "Ubentu" one ...which i'll give it a try soon after my surgery exam
2- another VERY annoying point honestly , it's the "inconsistency" ....
i mean , when i pressed the reset , it stopped showing me the "android-logo" , then after couple of resets , it started to show it AGAIN !!
then , doing hard reset (+vol + pwr + the or.lock) and confirmed erasing data and cache , the "android-logo" disappeared , and only ACER !!!
another , one normal reset , and it appeared again !!
ok ok ... let's forget this
i tried all 7 Stock ROMs ...
each SINGLE ROM , gave me at least 2-3 different responses !!
- the loading bar alone
- the robot with rotating thing , no loading bars
- the dead robot , no loading bar
- the robot with rotating crystal , with loading bar which get stuck at 25%-30%
- the dead robot , with loading bar which get stuck at around 20%
- Nothingness !! ( yes , it boot up from update.zip , then nothing happen)
*each trial , i gave it at least 20 min to progress up ... but with no use
anyway ,
3- i'll try again last time extracting CPUID , so i can install EUU ROMs .... but anyway ...
guys , does anyone know any relation between the S/N of the machine and the CPUID ?
just trying to think alittle bit differently , maybe , the S/N is 22 units long , so maybe there is a relation between them ?
4- if all failed , i think i'll have to wait till i get to dubai soon , because no service center in my country -_- !!
5- last resort , i'll use it as cutting table in my kitchen -_-
please guys ... help
IDEAS !!

i know you said the drivers are installed but I'm not sure they are....but try this
put your tab in manual apx mode and hook up to your pc - if theres an apx device listed then run afterOTA Lite version to get your cpuid that way...there is no relationship between the serial no and the cpuid...if nothing else works the only answer is Linux, as all the others have said

ok here what i have done ...
installed Ubuntu 12.10 ... done
installed all developer packages ...done
extracting the UID ... 0x3806148417f4317 ... done
double check ...the same result ...done
trying to convert to SBK ... FAIL
adding extra -as advised- "0" so the UID become ... 0x03806148417f4317 ...done
converting to SBK ... done
back to windows 7 ...done
trying to make "A 500 manger" or "A500 APX" detect the tablet ...fail
windows detection to APX .. done
retry "A500 manger or APX" ...fail
downgrading from "acer USB drive" 1.06 to 1.00 ....done
trying "A500 manger or APX" ...done
on "A500 APX" ... chose package 13 , put the SBK , APX detected , the tablet show "Acer" in green color with "Acer Iconia APX Mode" ... (finally something different)
"A500 APX" asks me if i saw the new "APX mode" ... yes
and then
it continued in all steps with success
till reaching " Exiting the bootloader..."
and it hangs for 30 min on that stage with no respond not what so ever !!! -_-
any ideas , guys ?? :fingers-crossed:

Dr.GM said:
ok here what i have done ...
installed Ubuntu 12.10 ... done
installed all developer packages ...done
extracting the UID ... 0x3806148417f4317 ... done
double check ...the same result ...done
trying to convert to SBK ... FAIL
adding extra -as advised- "0" so the UID become ... 0x03806148417f4317 ...done
converting to SBK ... done
Click to expand...
Click to collapse
Cpuid - take off 0x
Sent from my GT-I9300 using Tapatalk 2

3806148417f4317
and
03806148417f4317
gives me the same SBK ...
how long time should the flashing tool take till it complete its job ?

ok ...
now that's where i reached ....
and nothing happens after that
i flashed this bundle :
Bundle 13: A500 ICS BL v7 / Thor Recovery 1.7
ICS Unlocked / Skrilax Bootloader v7 and Thor Touch Recovery 1.7 (Legacy version for those with issues with 1.7.3) for the A500
using the "APX a500 flash utility" ...
then i ended up with this screen (see the attached image)
and can't pass it at all
trying SD card update.zip ...failed
trying secondary kernel ...failed
trying hard reset ...failed
so ??

ok ... back on track .... UP and RUNNING

Dr.GM said:
ok ... back on track .... UP and RUNNING
Click to expand...
Click to collapse
Hello! What did you do in the end? I have something not exactly the same, but a similar situation to yours. Your final solution could be my salvation too...... :crying:
Thanks in advance for any help.
Regards.

The tool he used flashes a custom recovery as well as the unlocked boot loader..for some reason the recover.img got corrupted...u must use the ones that come with the tool and use the tool to install it. Once u have the unlocked boot loader you're able to use a flash able zip to change it if u want.
So to answer yr question just reflash again. Choosing the bundle market option select bundle 17 its the latest version and seems most stable.
The window in the s/shot is fast boot menu, power volume up. Wiping cache helps if you are stuck on Acer boot logo
Sent from my GT-I9300 using Tapatalk 2

[HELP] How to flash stock ROM on HTC Desire 310 (1 SIM)

Hello.
I get HTC Desire 310( 1 SIM)
Problem is this that man that own it before me delete some file in system and now phone start only to HTC logo.
I can assess two modes:
-> Volume down + Power button == Some Factory screen of phone where can test phone and nothing other
-> Volume Up + Power button == Android system recovery (3e)
This phone seams to use MediaTek chip and here is my problem...Before i flash many HTC phones with normal bootloader but now i face something that i am not sure what to do.
I found few tuts but all is not very clear:
http://forum.xda-developers.com/showthread.php?t=2730031
http://4pda.ru/forum/index.php?showtopic=595511&st=320
Click to expand...
Click to collapse
So can someone tell me how to do it properly! Will be so useful to write clear guide or to contact me an i will help him with writing and testing of him so in the end in XDA to have one clear guide step by step how to fix this problem
Thanks
EDIT:
Now my phone cant start after try to flash it (SP flash tool give me error on process of "Download" )
When get battery off and press Volume Up and connect to PC -> Noting happen
When battery is on the phone and connect to PC just found the device for few second under COM PORT like "MediaTek PreLoader" and disappears after few second and all go from the beginning.
When try to flash it with SP Flash toll give me error "S_BROM_DOWNLOAD_DA_FAIL (2004)"
Phone can`t be turn on
So what to do now ?
Thanks

blade_h said:
Hello.
I get HTC Desire 310( 1 SIM)
Problem is this that man that own it before me delete some file in system and now phone start only to HTC logo.
I can assess two modes:
-> Volume down + Power button == Some Factory screen of phone where can test phone and nothing other
-> Volume Up + Power button == Android system recovery (3e)
This phone seams to use MediaTek chip and here is my problem...Before i flash many HTC phones with normal bootloader but now i face something that i am not sure what to do.
I found few tuts but all is not very clear:
So can someone tell me how to do it properly! Will be so useful to write clear guide or to contact me an i will help him with writing and testing of him so in the end in XDA to have one clear guide step by step how to fix this problem
Thanks
EDIT:
Now my phone cant start after try to flash it (SP flash tool give me error on process of "Download" )
When get battery off and press Volume Up and connect to PC -> Noting happen
When battery is on the phone and connect to PC just found the device for few second under COM PORT like "MediaTek PreLoader" and disappears after few second and all go from the beginning.
When try to flash it with SP Flash toll give me error "S_BROM_DOWNLOAD_DA_FAIL (2004)"
Phone can`t be turn on
So what to do now ?
Thanks
Click to expand...
Click to collapse
same problem...nobody knows what to do???

I ran into the same problem
When I try to flash with SP-FlashTool I get error 2004, even if MediaTek PreLoader USB VCOM Port is connected (it disconnects after 2 seconds, then reconnects...and so on).
Does anyone have an idea of what can we do?
EDIT: Solved by renaming "checksum.ini" to "checksum.old"

Lenovo A3500-HV Bricked while flashing ROM ( Cable disconnected )

OS : Windows 8.1 (With drivers successfully installed ) X64
Also tried on Windows 7 (With drivers successfully installed ) X86
Using SP flash tool
The device had this ROM : A3500HV_A442_01_37_140920_ROW
and it is the same I was trying to flash
Hi all , My lenovo A3500-HV went crazy and I had to re-install the rom ..
but while flashing using SP ( all drivers are OK ) the goddamn cable disconnected at about 15% - 20% from total progress
CURRENT STATE :
DEAD :'(
can't power up , nothing happens after pressing power button
can't go into recovery mode or download mode ( nothing happens when pressing VOL UP & Power , VOL UP & DOWN & Power or any other sequence )
it is not charging when I put it on the charger or the USB
is not being recognized when I plug it in ( see attachments please ) !!
device manager screen shot attached please have a look
-----
any hope it can revive ?? , how ??
or just go to the warranty ( really few days left ) .. note that it was rooted device .. ( ( will they ever detect the root if the device is dead ? ) )​

up

up

Help my update
ebram96 said:
up
Click to expand...
Click to collapse
I Have same problem. Did you have ANY SOLVE ?:angel:

I have same problem too,,Did you find any solution??

p.m.6 said:
I have same problem too,,Did you find any solution??
Click to expand...
Click to collapse
Look the device was stuck at boot but showing nothing on screen .. so I waited till it has 0% battery and re-flashed the rom successfully .. if you still having problems text me I may help

i have the samy problem
i have the same problem but i dont know how to fix it

ebram96 said:
Look the device was stuck at boot but showing nothing on screen .. so I waited till it has 0% battery and re-flashed the rom successfully .. if you still having problems text me I may help
Click to expand...
Click to collapse
is it really works? but i cant even see the screen backlight is turned on. was it the same with yours? how would you know when the battery level is 0%?
then after (we believe) the battery level is 0% you just connect your tab to your computer to make it show up with COM X connection, correct?
hope it really works and not a coincident (':

kakung said:
is it really works? but i cant even see the screen backlight is turned on. was it the same with yours? how would you know when the battery level is 0%?
then after (we believe) the battery level is 0% you just connect your tab to your computer to make it show up with COM X connection, correct?
hope it really works and not a coincident (':
Click to expand...
Click to collapse
YES , the tab backlight was off and there was not any sign of it working and then I lost hope and left it for a while and then I tried the charger and it was recharging so I tried flashing and it worked just fine

Lenovo A3500 bricked, "USB device not recognized"
ebram96 said:
YES , the tab backlight was off and there was not any sign of it working and then I lost hope and left it for a while and then I tried the charger and it was recharging so I tried flashing and it worked just fine
Click to expand...
Click to collapse
Lenovo A3500FL_A422 bricked, "USB device not recognized" when connected to windows, could not flash it using SP Flash Tool.
After disconnected the battery, flash process begun and was OK.
Thanks !

i have the same problem as yours
after i disconnect battry and flash rom it gets error while flashing on 20%
what should i do ?
:crying:
error : S_FT_DOWNLOAD_FAILD (4008)

arshiyah53 said:
i have the same problem as yours
after i disconnect battry and flash rom it gets error while flashing on 20%
what should i do ?
:crying:
error : S_FT_DOWNLOAD_FAILD (4008)
Click to expand...
Click to collapse
i'm manage to get on 40%
but it stuck in that.
error : S_FT_DOWNLOAD_FAILD (4008)
show up.
change the cable, change pc to laptop,
noting happen.
any sugestion?

Meizu m2 note bricked.

I have meizu m2 note. Its now bricked. I was using sp flash tool to unlock the bootloader and install twrp recovery.
i was following the guide giving on youtube. I can't attach an outside link here.
So i did everything this guide said, but on the last step when i switched off my phone and connected to the usb port. The sp flash tool stopped working i waited for 5-10 mins. Finally it crashed. Now when i try to connect my phone it says usb device not recognised (the last device you connected to this computer malfunctioned). I cannot start my phone. I tried pressing the power button for 10 secs, tried pressing volume + with power button, nothing happens.
Anybody have any idea how to solve this.

Go to download old version Flyme os 4+ any but original rom you have must install,
And dow load any latest sp tool,
And also downlaod latest all mtk devices drivers,
If you have system knoledge you can install all of these pc softwares,
Test it once again your phone connecting to computer,
Just detected only nothing. Can do that its just detected your will be alive soon but its very easy if you know a little bit mobile knowledge,
Lets go to process
Step 1 check best and good branded usb connecting cable, test to connect usb cable to your phone,
Step 2 extract Flyme stock rom, and extract mtk sp tool,
Step 3 open sp tool showing error there is no any scatter. Or download file dont worry, da file availble at sptools folder you can go and select, and scatter. File availble at flyme stock rom folder lets check it then select firmware all formate and install that you have to select that option, then you select download and now connect your phone just leave ituntill done then your phone is will alive feel happy like me if you need any more information any other problem connect. To. Me

Can you speak more clearly?I don't understand.Because my English is not very good.

zzx3731 said:
Can you speak more clearly?I don't understand.Because my English is not very good.
Click to expand...
Click to collapse
What problem with your phone?

Hi ! I have the same problem right now, when I plug it, it says device not recognised, what could I do now ?

Thank you very much，This is my mobile phone. It's done.Thank you for your kindness.
：○
Hagadou said:
What problem with your phone?
Click to expand...
Click to collapse

I been able to install LineageOS, I fixed it by pressing home and menu button, it disconnect and reconnect and i been able to Re-flash it with the recovery and when i tried to install Lineage, my error was gone (error 7)