Related
I recently tried the radio update by Bajok (http://forum.xda-developers.com/showpost.php?p=5034135&postcount=644),but in the middle of step 4,I accidentally disconnect the usb from my phone.. Now,my O2 Atom Life stuck at DSUU Mode,"Please plugin the USB cable and re enter eboot".. What can I do now? I can go to OS,but every time I soft reset,the error shows up.. I also got stuck every time at stage 4 when I retry to upgrade the Radio.. Any suggestion? Please..
reinstall the rom in ur phone and then do the radio update
djteotancolis said:
reinstall the rom in ur phone and then do the radio update
Click to expand...
Click to collapse
I did reinstall with many Roms,but still,each time the error exists..
Finally,I've revived my O2 Atom Life.. Thanks everyone..
how ur problem was solved ... can u plz tell ..
ahmedd said:
how ur problem was solved ... can u plz tell ..
Click to expand...
Click to collapse
Try do a hard reset (Hold power button + reset button).. Then,the device will ask to press Call button & End button..
after update the radio, my battery indicator always shows 100. the bar indicator is ok, but not the percent amount, it always 100. anyone knows how to fix this? tq.
please help
I accidently disconnect usb from phone when updating rom via dsuu. And now I am having dis error roport “!!!please plug in the usb cable and re-enter the eboot!!!”. I tried reinstalling via desktop but it did not connect, tried using mini sd, it finished installing but when the screen pop up the error report pop up. And I tried to press power and reset and after that no instruction appear accept the error report pop up. What should I do
Hello I will try to follow what is being said just to activate the download files.I do trying downloading music by pluging in the usb to my phone but it seems that my download files doesnt appear to my phone.
tovan_akbar said:
I accidently disconnect usb from phone when updating rom via dsuu. And now I am having dis error roport “!!!please plug in the usb cable and re-enter the eboot!!!”. I tried reinstalling via desktop but it did not connect, tried using mini sd, it finished installing but when the screen pop up the error report pop up. And I tried to press power and reset and after that no instruction appear accept the error report pop up. What should I do
Click to expand...
Click to collapse
try hardreset maybe, as he does...
I tried to hard reset but my ATOM just stop at "!!!Please plug-in the USB cable and re-enter eboot!!!" and even can't bl Plz help me.
Here new RUU for Mozart
http://www.filefactory.com/file/ca0..._1.30.061.01_5.54.09.21_22.33b.50_RELEASE.exe
Enjoy!
ROM contains NoDo update build 7355-89
Football said:
Here new RUU for Mozart
http://www.filefactory.com/file/ca0..._1.30.061.01_5.54.09.21_22.33b.50_RELEASE.exe
Enjoy!
ROM contains NoDo update build 7355-89
Click to expand...
Click to collapse
an official rom with the update included ?
The old flash junkie in me tells me to try it ... but at the same time don't want to lose all my settings and txt's etc etc ...
decisions decisions...
Has anyone told you they love you lately?
Infuriated-Germ said:
The old flash junkie in me tells me to try it ... but at the same time don't want to lose all my settings and txt's etc etc ...
decisions decisions...
Click to expand...
Click to collapse
There aren't that many settings to go re-enter anyway. I like a clean call log and text history so I am going for it. Only 15m left for download to complete and my phone needs charging
Its the loss of schaps advanced config tool (for custom theme colors) and ability to modify ringtones etc that bothers me most.
Just flashed this.
Copy/paste is there, the phone seems faster and the screen contrast higher;
OS: 7.0.7389.0
Firmware: 2250.09.13001.061
Radio: 5.54.09.21_22.33b.50.10U
Bootloader: 1.30.2250.1
Are the Orange Apps installed as well ?
Notice any issues with Zune sync ?
Спасибо))) то не было на ораж ничего то nепрь сразу с NoDo
How to
Been a long time flasher, with my touch pro 2 using energy roms so know what im doing.
But this rom seems different.
1. what is the correct process to flash this rom.
2. do i have to debrand first
3. do i need to install active sync, i have but it says drivers failed to load. I am running 64bit win 7
4. do i need to put it into boot loader
5. should i just wait for the official one.
6. i really dont want to do number 5.
please help
1. Correct process is you do need active sync, just make sure its the correct one for your system
2. No debranding needed,
3. See question 1
4.Yes bootloader is needed to flash with active sync
5. dont wait for official on as all updates are included.
and for other question on forum, yes all orange apps are included and seenm to be working
hope this helps everybody
i didnt think you needed active sync for wp7 devices only zune?
in anycase can someone who has done the upgrade please confirm:
1. You can go from old orange rom to the one above by simply running rom update or do you still need to copy over ruu signed file etc?
2. does the phone need to be unlocked?
3. you can use normal cable supplied with phone.
sorry for my ignorance. but everyones seems to be asking the same questions but no-one has of yet put up a defintive guide.
1. Yes you can flash from any Orange ROM to 1.30
2. No need to unlock the phone
3. Normal cable is fine
To flash, enter bootloader mode, close Zune and start the flashing utility. Bootloader mode can be accessed by pressing the volume down button while powering up. Make sure you are at 50% or above battery life.
Ca5c4d3 said:
1. Yes you can flash from any Orange ROM to 1.30
2. No need to unlock the phone
3. Normal cable is fine
To flash, enter bootloader mode, close Zune and start the flashing utility. Bootloader mode can be accessed by pressing the volume down button while powering up. Make sure you are at 50% or above battery life.
Click to expand...
Click to collapse
Confirmed everything works as above.
Slightly Scary moment during Flashing where it reached 9% and then rebooted the phone but continued successfully.
After such a hype about copy/paste ... wished the function worked better. Overall performance does seem much improved.
Thanks guys, will give it a try.
did you guys extract the files using winrar and then run the ruu file or did you just double click the file once downloaded?
amowolves said:
Thanks guys, will give it a try.
did you guys extract the files using winrar and then run the ruu file or did you just double click the file once downloaded?
Click to expand...
Click to collapse
After download I did the following:
Disabled File Defense on my Firewall (using Comodo FW & Windows 7)
Switched my phone off.
Restarted in Bootloader mode (While holding VOL DOWN key, Press Power button to turn on)
Connected the USB cable and waited for Windows to installs the correct driver.
Bootloader screen changes from "Serial" to "USB" (bottom of the screen)
Ran the EXE (as is, without unrar etc) as Administrator
Watched, waited, rebooted ... all is good.
nice one, cheers. will it give it a go tonight. fingers crossed.
Just run my phone next to my friends. both phones are orange but his version is 1.25.
1.30 boots faster, applications launch faster and the screen contrast is indeed higher. Also noticed a couple of new features such as automatic time sync from network and the phone now goes to vibrate during meetings automatically as windows mobile does.
I had to switch off auto time sync since orange uk was reporting 20:30 at 13:00
Just wanted to say thanks to all. I did the update last night and first impressions are good. seems smoother, faster, brighter. so far so good.
thanks for your help and thanks football for providing the rom.
How on earth do I install this on my phone?
I have Active Sync installed, Zune is installed, All drivers are installed.
Booted up in bootloader, started up the update in admin mode, and it keeps saying connection error like it doesn't pick up my phone.
What am I doing wrong?
atomfix said:
How on earth do I install this on my phone?
I have Active Sync installed, Zune is installed, All drivers are installed.
Booted up in bootloader, started up the update in admin mode, and it keeps saying connection error like it doesn't pick up my phone.
What am I doing wrong?
Click to expand...
Click to collapse
This is the steps I went through and worked first time.
1. Download Rom.
2. Download correct active sync for your system i.e. 32/64 bit.
3. Put phone into boot loader. Power off phone. power on holding the power button and volume down. this will take you to the three bar colour bootloader.
4. connect phone to pc using standard usb cable. which should say usb on the bottom bar.
5. run active sync, this should now find and connect to your phone.
6 run rom update with or without unzipping that is up to you.
7 wait for update to flash. this does take about 4 - 5 min but seems like forever.
Hope this helps anybody wanting to do this as it is well worth it.
Anybody try this ????? :
Try using the Windows Phone Support Tool. The Windows Phone Support Tool is an application that fixes problems that prevent your Windows Phone 7 from updating successfully. The tool only works for the two error codes listed in the Symptoms section.
Unplug the USB cable from the phone.
Download the Windows Phone Support Tool from the Microsoft Download Center. If you have a 32-bit system, download the WPSupportTool-x86.msi (http://download.microsoft.com/downl...-4E4A-8179-9A3C5483E366/WPSupportTool-x86.msi) package. If you have a 64-bit system, download the WPSupportTool-amd64.msi (http://download.microsoft.com/downl...E4A-8179-9A3C5483E366/WPSupportTool-amd64.msi) package.
Note If you're not sure whether you have a 32-bit or 64-bit system, read the following Microsoft Knowledge Base article:
827218 (http://support.microsoft.com/kb/827218/ ) How to determine whether a computer is running a 32-bit version or 64-bit version of the Windows operating system.
Complete the steps to install the WPSupportTool package.
When you're finished, click Start, point to All Programs, and then from the list of programs, click Windows Phone Support Tool.
On your phone, press and hold the Power Collapse this imageExpand this imagebutton for 5 seconds until the message Goodbye! appears.
Press the Power Collapse this imageExpand this imagebutton again to turn the phone back on. As soon as the phone turns on and vibrates, press and hold the Camera Collapse this imageExpand this imagebutton until the "Connect to PC" screen appears. It may take a few moments for this to appear. As soon as the screen appears, you may release the Camera Collapse this imageExpand this imagebutton. Note The camera button is located on the side of your phone.
Collapse this imageExpand this image
Reconnect your phone by using the USB cable.
Your phone will be detected by your computer and the Zune software may automatically start. This process frequently takes several minutes.
Important If the Zune software does start, close it.
In the Windows Phone Support Tool, click the Recover button.
Collapse this imageExpand this image
The Windows Phone Support Tool will install an update that fixes the problem and restart your phone. If you phone is locked, enter your password when prompted.
When you see "The device has been updated" text, located at the bottom of the screen, close the Windows Phone Support Tool and disconnect your phone.
Collapse this imageExpand this image
Reconnect your phone to the computer to install the latest phone update by using the Zune software. (To update your phone's software, click Settings, click phone, and then click update.)
galati said:
Anybody try this ????? :
Try using the Windows Phone Support Tool. The Windows Phone Support Tool is an application that fixes problems that prevent your Windows Phone 7 from updating successfully. The tool only works for the two error codes listed in the Symptoms section.
Unplug the USB cable from the phone.
Download the Windows Phone Support Tool from the Microsoft Download Center. If you have a 32-bit system, download the WPSupportTool-x86.msi (http://download.microsoft.com/downl...-4E4A-8179-9A3C5483E366/WPSupportTool-x86.msi) package. If you have a 64-bit system, download the WPSupportTool-amd64.msi (http://download.microsoft.com/downl...E4A-8179-9A3C5483E366/WPSupportTool-amd64.msi) package.
Note If you're not sure whether you have a 32-bit or 64-bit system, read the following Microsoft Knowledge Base article:
827218 (http://support.microsoft.com/kb/827218/ ) How to determine whether a computer is running a 32-bit version or 64-bit version of the Windows operating system.
Complete the steps to install the WPSupportTool package.
When you're finished, click Start, point to All Programs, and then from the list of programs, click Windows Phone Support Tool.
On your phone, press and hold the Power Collapse this imageExpand this imagebutton for 5 seconds until the message Goodbye! appears.
Press the Power Collapse this imageExpand this imagebutton again to turn the phone back on. As soon as the phone turns on and vibrates, press and hold the Camera Collapse this imageExpand this imagebutton until the "Connect to PC" screen appears. It may take a few moments for this to appear. As soon as the screen appears, you may release the Camera Collapse this imageExpand this imagebutton. Note The camera button is located on the side of your phone.
Collapse this imageExpand this image
Reconnect your phone by using the USB cable.
Your phone will be detected by your computer and the Zune software may automatically start. This process frequently takes several minutes.
Important If the Zune software does start, close it.
In the Windows Phone Support Tool, click the Recover button.
Collapse this imageExpand this image
The Windows Phone Support Tool will install an update that fixes the problem and restart your phone. If you phone is locked, enter your password when prompted.
When you see "The device has been updated" text, located at the bottom of the screen, close the Windows Phone Support Tool and disconnect your phone.
Collapse this imageExpand this image
Reconnect your phone to the computer to install the latest phone update by using the Zune software. (To update your phone's software, click Settings, click phone, and then click update.)
Click to expand...
Click to collapse
This is the wrong place Sir
i tried this just yesterday, and it didn't work. Instead of pressing the camera button i used zune update to restart the phone and get to the "connect to PC" screen. the tool just wouldn't see it.
i think the main problem is with the drivers. if you check the device manager you will see the phone is identified as Leo, under portable devices, while at the "connect to PC" Screen.
No it doesn't work when you press recover you get the follow
The phone is not in the 'Connect to PC' state. Please, make sure that you follow the instructions and your phone shows the 'Connect To PC' image.
Whats with the "Collapse this imageExpand this image" everywhere?
Starfury said:
Whats with the "Collapse this imageExpand this image" everywhere?
Click to expand...
Click to collapse
That's called " I copy-pasted everything without editing"
hi i got this link may be it works
http://blog.walshie.me/2011/04/04/so-who-wants-windows-phone-updates-like-right-now/
i dint try but looks relaible
chiragpatwa said:
hi i got this link may be it works
http://blog.walshie.me/2011/04/04/so-who-wants-windows-phone-updates-like-right-now/
i dint try but looks relaible
Click to expand...
Click to collapse
I just tried this. It runs without problems and says it has updated the phone but the phone still says 7004....
It doesn't work, though the updater doesn't deliver an error message. I'm wondering if there is a possibility to modify this tool in order to handle the updating process...!?!
i try the both with all the method possible but no luck.
lestatneo said:
i tried this just yesterday, and it didn't work. Instead of pressing the camera button i used zune update to restart the phone and get to the "connect to PC" screen. the tool just wouldn't see it.
i think the main problem is with the drivers. if you check the device manager you will see the phone is , under portable devices, while at the "connect to PC" Screen.
Click to expand...
Click to collapse
Hi m8....
I did try this method to..no luck ... i do beleive that is the second boot that when the device
is identified as Leo where the problem is...
Is there a way to to change that, and install the driver for hd7 insteed...?
I think that this tool is very importand for Leo users and it will lets us update the phone.
Maybe a developer can help on this ???
colossus
anyone got a copy of ChevronWP7.Updater
michaels0007 said:
anyone got a copy of ChevronWP7.Updater
Click to expand...
Click to collapse
Here you go m8
Mine is still on 7.0.7004.0.
Did somebody with 7008 on a HD2 try to go to NoDo with the New Chevron tool?
Updated Successfully with Chevron but still showing 7008 no copy paste but system is running much smoother....
PedrooNL said:
Mine is still on 7.0.7004.0.
Did somebody with 7008 on a HD2 try to go to NoDo with the New Chevron tool?
Click to expand...
Click to collapse
I suspect it doesn't run any better than the update from 7004 .
Seems like Microsoft advise to wp7 users, dont use the chev updater , because cant use the future update.
colossus_r said:
Here you go m8
Click to expand...
Click to collapse
I tried the chevron updater method, and it updated me succesfully, but when my phone rebooted, it showed me a picture that told me to connect it to the PC. I did, and zune said there was an error with the device, in summary, it was bricked. Of course, MAGLDR prevents brick, because i could just flash wp7 again, but just don't try this.
And i think it killed my SDCARD D:
Nothing reads it/finds it. this is so weird. :'(
You are too fast men ,haha, you most be little slowly with your phone. The picture you have seen its normal and you only have to do is do not unplug your phone of the computer , and if you do it nothing hapend , is no necesarry to reflash your phone , just remove the battery and restart your phone. Always its inutile to try it becvause at the moment no funcion the update in HD2.Regards !!
anyone got a copy of ChevronWP7.Updater x64
Heya!
I bought a demo LG Quantum for a song today and I've been trying to remove the Demo software by following these instructions:
Through work aquired a Mozart with Telstra Demo(Store) Rom. Very furstrating as it wouldnt hold settings and kept playing that damn video.....
Downloaded this rom (following the links from here and trying a few download mirrors until I found one that worked)
Turned off Phone
Held Volume Down Key while Pressing Power Button (This turns the phone on and launched Bootloader)
Connected to PC Waited about 5 minutes while Windows auto detected the drivers and installed what it needed
Right Mouse clicked on the downloaded Rom and selected "Run as Administrator"
Followed the prompts.
****NOTE**** When it got to 10% the phone rebooted - LET IT!!!!! DO NOT TOUCH IT DO NOT DISCONNECT IT - Just wait -The computer will redetect and about 10 Min later VIOLA - All sorted nice and clean WP7 HTC Mozart (with a with Telstra One Hub - which aint that bad) - Whacked the 3 Sim card in - Downloaded Connection Setup Wizard from market place and a few minutes later was sending and receiving MMS etc
Click to expand...
Click to collapse
However, I don't know if this applies to the LG Quantum since I can't seem to access the Bootloader screen and the ROM I can't find an executable ROM file like the one he refers to.
Has anyone resolved this problem on their Quantum?
Could you help me through it?
Thanks in advance,
-Aylmer
Nevermind! I was trying to flash it, but, in the LGDP2 Flashing app, I was plugging in the phone before pressing start!
Oups!
If you're still having problems, the other trick is to use the drivers from the LG Mobile Support Tool.
I got mine from eBay for $100...it is a Demo unit. This thread is very helpful and hope to remove the "Device Alive" software and enjoy my nifty windows phone!
As an avid Android and iOS user I look forward to having fun with WP7
voltagex said:
If you're still having problems, the other trick is to use the drivers from the LG Mobile Support Tool.
Click to expand...
Click to collapse
How would that trick work?
Does anyone have the link for the stock rom? I can't seem to be able to download from http://depositfiles.com/en/files/tmh1fz1ed. It always says invalid param. Could anyone post it here or upload it to mediafire or something? Thnx
ok managed to download the LG c900 ROM but installing the LGDP2 gives me the Installshield error , Catastrophic Error. And my LG USB Modem doesn't wanna install
Could you give more detail about the problem?
Also, which version of Windows are you using?
Hi all,
I have a serious problem with my G2 which I could not solve: I used the new LG Flash Tool 2014 with stock KDZ file, everything was going just fine till I received an error message that LG server is not available, I disconnected the USB cable by mistake from my G2 and afterward I saw that it was in the middle of flashing process (12% was completed). I turned it off and tried to reach download mode again and nothing!, I'm receiving the "LG" logo and nothing- the screen goes black (it is still on).
I tried also to connect my phone to the computer- I received a list of 13 "new" local disks "H" to "T", only "H" disk is available and it's showing "image" folder with list of files.
I cannot reach "download mode", nothing is working!
I hope this is not the end for my G2..
please help me
Thank you so much!
If you could receive all those hard disks then you could maybe fix it with linux/ubuntu if you have it. Search for guides to cOpy the neccesary stuff bacK like the bootloader. I can't really help you atm as i am too sleepy.
wulsic said:
If you could receive all those hard disks then you could maybe fix it with linux/ubuntu if you have it. Search for guides to cOpy the neccesary stuff bacK like the bootloader. I can't really help you atm as i am too sleepy.
Click to expand...
Click to collapse
Thank you for your reply. I found this on the sticky threads: "[FIX] NO Recovery mode, No download mode, after OTA on rooted LG G2".
I installed ubuntu and followed the instructions. when I type the following: "gdisk -l /dev/sde" I receive an error message:
"GPT fdisk (gdisk) version 0.5.1
NOTE: Write test failed with error number 13. It will be impossible to save
changes to this disk's partition table!
Problem opening /dev/sde for reading! Error is 13
You must run this program as root or use sudo!"
My device is not rooted, is this the problem?
Please help me!!
Thanks
@NNCa It says you need to run the program as root on ubuntu.
Just use sudo in front of the commands.
You need to type once your password to use sudo, you can't see the password if you enter it for safety I guess but just click enter after you typed ykur password.
wulsic said:
@NNCa It says you need to run the program as root on ubuntu.
Just use sudo in front of the commands.
You need to type once your password to use sudo, you can't see the password if you enter it for safety I guess but just click enter after you typed ykur password.
Click to expand...
Click to collapse
Thank you so much!!
I succeeded to push all the files according to this thread, however I do not see the TWRP menu. I have just constant "LG" logo on screen.
Do I miss something?
Thanks!
NNCa said:
Thank you so much!!
I succeeded to push all the files according to this thread, however I do not see the TWRP menu. I have just constant "LG" logo on screen.
Do I miss something?
Thanks!
Click to expand...
Click to collapse
Well its good you're an step further, try to reboot to recovery using power+volume down i believe or its up idk try both it should say something about wipe data factory reset, press the power button and you are in recovery.
wulsic said:
Well its good you're an step further, try to reboot to recovery using power+volume down i believe or its up idk try both it should say something about wipe data factory reset, press the power button and you are in recovery.
Click to expand...
Click to collapse
Hi,
I powered off my phone by pressing volume down + power for a while ("LG" logo blinked once and phone was fully powered off).
I pushed volume down + power till I saw the LG logo, released it, and pushed again- and finally I reached the Factory Hard Reset screen. I have pushed 3 times the power, and I have got "Factory reset processing..." and nothing is appeared, even when I'm pushing several times on power again.
I guess this is the end of my G2 :crying:
Thank you all for your support, this is an excellent forum!:good::good:
NNCa said:
Hi,
I powered off my phone by pressing volume down + power for a while ("LG" logo blinked once and phone was fully powered off).
I pushed volume down + power till I saw the LG logo, released it, and pushed again- and finally I reached the Factory Hard Reset screen. I have pushed 3 times the power, and I have got "Factory reset processing..." and nothing is appeared, even when I'm pushing several times on power again.
I guess this is the end of my G2 :crying:
Thank you all for your support, this is an excellent forum!:good::good:
Click to expand...
Click to collapse
Nope it isn't the end try to install the recovery again or try to push the custom twrp recovery again to the right partition! Dont give up that fast when i hear your things then its still fixable! you already got the factory reset processing so try to Push the Recovery again and search for an guide about recovery maybe Then you would probably get your device fixed.
Just read my things about simplicity so think easy and you can fix it. AND STAY POSITIVE You will repair your phone today :good:
wulsic said:
Nope it isn't the end try to install the recovery again or try to push the custom twrp recovery again to the right partition! Dont give up that fast when i hear your things then its still fixable! you already got the factory reset processing so try to Push the Recovery again and search for an guide about recovery maybe Then you would probably get your device fixed.
Just read my things about simplicity so think easy and you can fix it. AND STAY POSITIVE You will repair your phone today :good:
Click to expand...
Click to collapse
Thanks, but after connecting the device to linux/windows, it seems that it is not recongized, I do not see the partitions anymore even when typing "ls /dev/sd*" through linux terminal..
NNCa said:
Thanks, but after connecting the device to linux/windows, it seems that it is not recongized, I do not see the partitions anymore even when typing "ls /dev/sd*" through linux terminal..
Click to expand...
Click to collapse
Yeah because the phone has bootloader etc again so maybe you can try this:
http://forum.xda-developers.com/showthread.php?t=2432476
wulsic said:
Yeah because the phone has bootloader etc again so maybe you can try this:
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
Hi there,
I tried to flash my phone using the lg flash tool, unfortunately it cannot recognized any connected device through USB.. I don't know what else will work for my device
NNCa said:
Hi there,
I tried to flash my phone using the lg flash tool, unfortunately it cannot recognized any connected device through USB.. I don't know what else will work for my device
Click to expand...
Click to collapse
Did you already installed the LG drivers? and checked in device manager or there is like any change when you connect and disconnect your phone?
wulsic said:
Did you already installed the LG drivers? and checked in device manager or there is like any change when you connect and disconnect your phone?
Click to expand...
Click to collapse
Yes, I checked it- no response during connecting/disconnecting the device..
Maybe I did a mistake when trying to push those image files.. I guess there is nothing I can do to fix my phone..
Do you have any other suggestions?
Can someone please help me. How can I get to the LG device- Is there another software I can use to flash files into this device?
Thanks
NNCa said:
Can someone please help me. How can I get to the LG device- Is there another software I can use to flash files into this device?
Thanks
Click to expand...
Click to collapse
Sorry for late reaction but i needed to think of something. Did you tryed to use another cable? Did you tryed to do it on another pc? Did you tryed to maybe install LG PC suite and see if it gets recognized? If you have the PC Suite you may need to turn it off in the LG flashtool idk. Can you tell us more like which windows you have?
wulsic said:
Sorry for late reaction but i needed to think of something. Did you tryed to use another cable? Did you tryed to do it on another pc? Did you tryed to maybe install LG PC suite and see if it gets recognized? If you have the PC Suite you may need to turn it off in the LG flashtool idk. Can you tell us more like which windows you have?
Click to expand...
Click to collapse
Hi,
I tried all you suggested, however my devide is not recognized. I tried to use the LG PC Suite and to flash by IMEI, however it is still saying that no device was connected.. I checked windows device manager, and nothing changed there.
There is any chnage I can see my connected device? use some tool or another software?
Thank you again for your patience and help!
NNCa said:
Hi,
I tried all you suggested, however my devide is not recognized. I tried to use the LG PC Suite and to flash by IMEI, however it is still saying that no device was connected.. I checked windows device manager, and nothing changed there.
There is any chnage I can see my connected device? use some tool or another software?
Thank you again for your patience and help!
Click to expand...
Click to collapse
Hi, sorry to say but you have unfortunately completely hardbricked your device. It happened to me too however I was able to get it replaced under warranty at no extra cost.
What happened was that when your phone was still detected by linux, you had a chance to recover by flashing the correct partitions to gain access to download mode and from there, flash a KDZ to go back to complete stock. However, the files you used were probably incompatible with your variant which has now corrupted your bootloader sequence. I suggest you read this reply by fizzy177 as well as the rest of the thread: http://forum.xda-developers.com/showpost.php?p=51522304&postcount=118
So right now, you cannot do anything as you have already found out, no computer will recognise that your phone is plugged in. Your phone fails to boot when you try enter the download mode and it just freezes on the splash screen which looks like this: http://www.lg-phones.org/wp-content/uploads/2014/03/image2.png
What's meant to happen is your phone should load past that initial splash screen into this http://www.androiddunya.com/wp-content/uploads/2014/01/LG-G2-DownloadMode.jpg which accepts KDZ flashing and warns the device has been rooted.
So it's a blessing that your phone cannot boot as LG cannot find out you have voided warranty and you will be able to get a replacement free of charge.
Issue was solved- device was fixed under warranty
Hi,
I just want to update you all that my device was fixed under warranty! (motherboard replacement)
Thank you all for help and great support, this is a great forum with great community :good::good:
Hello
From past 2 weeks i am wondering on internet for a solution . Hours and hours of surfing and articles but still
Hope some one solve this issue.
Okay. First i m using LG G2 F320 K update to lollipop . Non rooted. It was working fine . I can transfer files in MTP .
But about a month ago i get an update for my phone . And after some days i need to transfer some files to my phone , i wonder when i connected my phone to computer nothing happened . No notification on mobile for changing PTP MTP option . Also nothing happened in Computer device manager..
From that day i am unable to connect my phone with windows 10. It always charging mobile.
I uninstalled all drivers in device manager and installed from LG website. I updates windows N and NK MTP update from windows for windows 10.
I changed different data cables and different computers and different ports . All stuff i can do. Still no luck.
When ever i plug USB data cable it always put my Mobile on Charging . No notification on Mobile. Also i go in setting > storage> and there is no option in upper right corner to select USB PC connection .
I am in developer mode and debugging mode is on also. Also USB tethering option is Disabled .
Kindly some one help me regarding this.
LG G2 F320K updated to stock Koren lollipop 5.0.1 . Non root.( i updated lollipop in April 2015)
Issue i am facing is no notification for Charging/ MTP/PTP Usb Debugging on mobile notice bar when i attach my phone using USB cord with computer. Also in computer device manager nothing happen. Even i checked on windows 10 , 8.1, 8, 7 .
I remember it was working like charm 4 weeks before I can change MTP PTP or Charge only mode by selecting notification when i attach it to my laptop. I can transfer files can use LG PC suit .
Then i received an software update like 40 mb and i updated my mobile. That i remembered.
After that 2 weeks before i need to transfer some books from laptop to my mobile. When i plugged my device there no notification to select MTP mode . Also there is nothing happened in my windows 10. I looked in task manager. No yellow icon in computer task manager for driver thing.
Laptop is just silent and mobile is just on charging .
Then i go to setting in LG and looked for USB PC connection settings. I wonder there is nothing . Settings > storage > 3 dot in upper right corner.. it suppose to be there . But here is no 3 dot in storage. Then i looked into share and networks in android setting and i found that USB tethering. But its faded mean it is disabled and i am unable to use this feature also.
I tried on different computers different cables , original, but nothing. Always when i plug usb mobile went on charging and in all computers nothing happen in device manager.
USB debugging is on.. I factory reset device 2 times. but useless. Also i uninstall all drivers from my laptop and then reinstall drivers from LG website also i tried google drivers , ABD, different ports. Nothing nothing happen.
Also now if i try put mobile on download mode by turning device off and then push + vol button and then put cord in mobile . No download mode also it went on charging. Well charging from laptop or from charger is okay.
Hope i explain all.