Database Users

[Q] Flash Tool says: "Searching for Xperia..."

I have Xperia X8 with Eclair update. When I try to flash with X10 Flash Tool it always says Searching for Xperia... Yes I connected the phone in flash mode by holding back button and conecting with usb, I have usb drivers. Non-gui version says the same. I have tried to flash 1.6 firmware from "Going back to 1.6" thread. Please help me, fast!

please post question at general section

Flash Tool help
Try connecting the phone in flash mode, when the flash tool displays "Searching for Xperia ......"

Solved!
Solved! I just installed some drivers from some site. Yes i know i was telling that i have drivers, just i did not know i have incorrect drivers.
Now i am back to Android 1.6!
Can somebody sugest me way to root my Xperia X8?

Now, follow the Step by Step TUT.
Step by Step TUT

Now Rooted 2.1. Thanks for help.

Next time it should help: http://forum.xda-developers.com/showpost.php?p=9510216&postcount=16

How can I install the drivers?
I've downloaded the files with the i386 and amd 64 files but I don't really know what to do with them.
When the device is on the pc is ok with it but when I'm in flash mode the pc just doesn't recognize it and the flash tool says that it's searching for my xperia.
What can I do?
Thanks, Tal.

SaNTi285 said:
How can I install the drivers?
I've downloaded the files with the i386 and amd 64 files but I don't really know what to do with them.
When the device is on the pc is ok with it but when I'm in flash mode the pc just doesn't recognize it and the flash tool says that it's searching for my xperia.
What can I do?
Thanks, Tal.
Click to expand...
Click to collapse
Download automatic install from this link http://www.akshayy.com/sonyericsson/wp-content/uploads/SE_USB_Driver_installer.zip
Press the thanks button!

I've installed the drivers you gave me and it still didn't work even though the computer recognized it now but still in device manager i have it under a yellow triangle sign.
what can I do now? maybe it's my computer that make the problem?
I'm really getting frostrated about it and don't know what to do.

Full instructions.
SaNTi285 said:
I've installed the drivers you gave me and it still didn't work even though the computer recognized it now but still in device manager i have it under a yellow triangle sign.
what can I do now? maybe it's my computer that make the problem?
I'm really getting frostrated about it and don't know what to do.
Click to expand...
Click to collapse
This should really help!
1. On the yellow triangle right click and select "Update Driver..."
2. Download "Non-Gui" version.
3. Put 1.6 firmware on "firmware" folder.
4. Open "X10flash.bat"
5. Write "2" and press enter.
6. Write "y" and press enter.
7. Select operating system, but DONT PRESS ENTER!
8. Now connect USB to computer, but not in phone.
9. Turn off phone.
10. On phone hold back key and connect phone with USB, but dont relase key.
11. On flasher press enter while holding back key.
12. Relase it when it says "Sending Loader..."
This should fix your problem. This is how I done it!

Still not succeeded with flashing.....
velnens123 said:
This should really help!
1. On the yellow triangle right click and select "Update Driver..."
2. Download "Non-Gui" version.
3. Put 1.6 firmware on "firmware" folder.
4. Open "X10flash.bat"
5. Write "2" and press enter.
6. Write "y" and press enter.
7. Select operating system, but DONT PRESS ENTER!
8. Now connect USB to computer, but not in phone.
9. Turn off phone.
10. On phone hold back key and connect phone with USB, but dont relase key.
11. On flasher press enter while holding back key.
12. Relase it when it says "Sending Loader..."
This should fix your problem. This is how I done it!
Click to expand...
Click to collapse
I am still not succeeded with flashing my x8 to android 1.6 (now having 2.1) so i can root 2.1. I am a really noob, so i hope anyone can help me
What did you mean with yelllow triangle, and where can you download non-gui version? When i open the x10flash.bat i cannot write anything (there is nothing happened when i press 2 or Y.
I hope anyone can help me
(Sorry for my bad English)

Explain for Noobs!
thomaszq said:
I am still not succeeded with flashing my x8 to android 1.6 (now having 2.1) so i can root 2.1. I am a really noob, so i hope anyone can help me
What did you mean with yelllow triangle, and where can you download non-gui version? When i open the x10flash.bat i cannot write anything (there is nothing happened when i press 2 or Y.
I hope anyone can help me
(Sorry for my bad English)
Click to expand...
Click to collapse
Yellow trinagle is located in device manager!(just look at other thread)
You can get non-gui version in Bin4ry thread "X10 Flash Tool...and so on"
You need to open x10flash.bat in non-gui folder.(not gui)

velnens123 said:
This should really help!
1. On the yellow triangle right click and select "Update Driver..."
2. Download "Non-Gui" version.
3. Put 1.6 firmware on "firmware" folder.
4. Open "X10flash.bat"
5. Write "2" and press enter.
6. Write "y" and press enter.
7. Select operating system, but DONT PRESS ENTER!
8. Now connect USB to computer, but not in phone.
9. Turn off phone.
10. On phone hold back key and connect phone with USB, but dont relase key.
11. On flasher press enter while holding back key.
12. Relase it when it says "Sending Loader..."
This should fix your problem. This is how I done it!
Click to expand...
Click to collapse
Im still stuck on step 1. The yellow mark still wont disappear no matter what I have tried to reinstall/update the driver.
I have let the wizard to search the internet for correct driver, and I have point it to specific folder with the driver in it, I have tried several versions of the driver that I can find on the net.
I keep getting "the hardware was not installed because the wizard cannot find the necessary software" error.
I can use Flash Tool GUI to root my X8 and to install XRecovery. Those were done successfully. And we are talking same session same day here. Just straight after I rooted the phone and installed Xrecovery, did a backup, then I wanted to flash to 2.1 but then this happened.
Only when the phone is connected to the PC in flash mode.
Can anyone help point me in the right direction?
Forgot to mention: the driver I'm talking about is SEMC signed driver. That is the driver for flashing right? Or have I totally missed this point all together?

I got it working now. It was not SEMC driver that's needed. It should be the gordon's gate driver. For some reason that driver went missing. I have installed SEUS and managed to flash my phone yesterday using SEUS. So definitely it was installed, but disappeared today or sometime after I used SEUS last.

Removing USB connection while flashing

Hi all,
I have a serious problem with my G2 which I could not solve: I used the new LG Flash Tool 2014 with stock KDZ file, everything was going just fine till I received an error message that LG server is not available, I disconnected the USB cable by mistake from my G2 and afterward I saw that it was in the middle of flashing process (12% was completed). I turned it off and tried to reach download mode again and nothing!, I'm receiving the "LG" logo and nothing- the screen goes black (it is still on).
I tried also to connect my phone to the computer- I received a list of 13 "new" local disks "H" to "T", only "H" disk is available and it's showing "image" folder with list of files.
I cannot reach "download mode", nothing is working!
I hope this is not the end for my G2..
please help me
Thank you so much!

If you could receive all those hard disks then you could maybe fix it with linux/ubuntu if you have it. Search for guides to cOpy the neccesary stuff bacK like the bootloader. I can't really help you atm as i am too sleepy.

wulsic said:
If you could receive all those hard disks then you could maybe fix it with linux/ubuntu if you have it. Search for guides to cOpy the neccesary stuff bacK like the bootloader. I can't really help you atm as i am too sleepy.
Click to expand...
Click to collapse
Thank you for your reply. I found this on the sticky threads: "[FIX] NO Recovery mode, No download mode, after OTA on rooted LG G2".
I installed ubuntu and followed the instructions. when I type the following: "gdisk -l /dev/sde" I receive an error message:
"GPT fdisk (gdisk) version 0.5.1
NOTE: Write test failed with error number 13. It will be impossible to save
changes to this disk's partition table!
Problem opening /dev/sde for reading! Error is 13
You must run this program as root or use sudo!"
My device is not rooted, is this the problem?
Please help me!!
Thanks

@NNCa It says you need to run the program as root on ubuntu.
Just use sudo in front of the commands.
You need to type once your password to use sudo, you can't see the password if you enter it for safety I guess but just click enter after you typed ykur password.

wulsic said:
@NNCa It says you need to run the program as root on ubuntu.
Just use sudo in front of the commands.
You need to type once your password to use sudo, you can't see the password if you enter it for safety I guess but just click enter after you typed ykur password.
Click to expand...
Click to collapse
Thank you so much!!
I succeeded to push all the files according to this thread, however I do not see the TWRP menu. I have just constant "LG" logo on screen.
Do I miss something?
Thanks!

NNCa said:
Thank you so much!!
I succeeded to push all the files according to this thread, however I do not see the TWRP menu. I have just constant "LG" logo on screen.
Do I miss something?
Thanks!
Click to expand...
Click to collapse
Well its good you're an step further, try to reboot to recovery using power+volume down i believe or its up idk try both it should say something about wipe data factory reset, press the power button and you are in recovery.

wulsic said:
Well its good you're an step further, try to reboot to recovery using power+volume down i believe or its up idk try both it should say something about wipe data factory reset, press the power button and you are in recovery.
Click to expand...
Click to collapse
Hi,
I powered off my phone by pressing volume down + power for a while ("LG" logo blinked once and phone was fully powered off).
I pushed volume down + power till I saw the LG logo, released it, and pushed again- and finally I reached the Factory Hard Reset screen. I have pushed 3 times the power, and I have got "Factory reset processing..." and nothing is appeared, even when I'm pushing several times on power again.
I guess this is the end of my G2 :crying:
Thank you all for your support, this is an excellent forum!:good::good:

NNCa said:
Hi,
I powered off my phone by pressing volume down + power for a while ("LG" logo blinked once and phone was fully powered off).
I pushed volume down + power till I saw the LG logo, released it, and pushed again- and finally I reached the Factory Hard Reset screen. I have pushed 3 times the power, and I have got "Factory reset processing..." and nothing is appeared, even when I'm pushing several times on power again.
I guess this is the end of my G2 :crying:
Thank you all for your support, this is an excellent forum!:good::good:
Click to expand...
Click to collapse
Nope it isn't the end try to install the recovery again or try to push the custom twrp recovery again to the right partition! Dont give up that fast when i hear your things then its still fixable! you already got the factory reset processing so try to Push the Recovery again and search for an guide about recovery maybe Then you would probably get your device fixed.
Just read my things about simplicity so think easy and you can fix it. AND STAY POSITIVE You will repair your phone today :good:

wulsic said:
Nope it isn't the end try to install the recovery again or try to push the custom twrp recovery again to the right partition! Dont give up that fast when i hear your things then its still fixable! you already got the factory reset processing so try to Push the Recovery again and search for an guide about recovery maybe Then you would probably get your device fixed.
Just read my things about simplicity so think easy and you can fix it. AND STAY POSITIVE You will repair your phone today :good:
Click to expand...
Click to collapse
Thanks, but after connecting the device to linux/windows, it seems that it is not recongized, I do not see the partitions anymore even when typing "ls /dev/sd*" through linux terminal..

NNCa said:
Thanks, but after connecting the device to linux/windows, it seems that it is not recongized, I do not see the partitions anymore even when typing "ls /dev/sd*" through linux terminal..
Click to expand...
Click to collapse
Yeah because the phone has bootloader etc again so maybe you can try this:
http://forum.xda-developers.com/showthread.php?t=2432476

wulsic said:
Yeah because the phone has bootloader etc again so maybe you can try this:
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
Hi there,
I tried to flash my phone using the lg flash tool, unfortunately it cannot recognized any connected device through USB.. I don't know what else will work for my device

NNCa said:
Hi there,
I tried to flash my phone using the lg flash tool, unfortunately it cannot recognized any connected device through USB.. I don't know what else will work for my device
Click to expand...
Click to collapse
Did you already installed the LG drivers? and checked in device manager or there is like any change when you connect and disconnect your phone?

wulsic said:
Did you already installed the LG drivers? and checked in device manager or there is like any change when you connect and disconnect your phone?
Click to expand...
Click to collapse
Yes, I checked it- no response during connecting/disconnecting the device..
Maybe I did a mistake when trying to push those image files.. I guess there is nothing I can do to fix my phone..
Do you have any other suggestions?

Can someone please help me. How can I get to the LG device- Is there another software I can use to flash files into this device?
Thanks

NNCa said:
Can someone please help me. How can I get to the LG device- Is there another software I can use to flash files into this device?
Thanks
Click to expand...
Click to collapse
Sorry for late reaction but i needed to think of something. Did you tryed to use another cable? Did you tryed to do it on another pc? Did you tryed to maybe install LG PC suite and see if it gets recognized? If you have the PC Suite you may need to turn it off in the LG flashtool idk. Can you tell us more like which windows you have?

wulsic said:
Sorry for late reaction but i needed to think of something. Did you tryed to use another cable? Did you tryed to do it on another pc? Did you tryed to maybe install LG PC suite and see if it gets recognized? If you have the PC Suite you may need to turn it off in the LG flashtool idk. Can you tell us more like which windows you have?
Click to expand...
Click to collapse
Hi,
I tried all you suggested, however my devide is not recognized. I tried to use the LG PC Suite and to flash by IMEI, however it is still saying that no device was connected.. I checked windows device manager, and nothing changed there.
There is any chnage I can see my connected device? use some tool or another software?
Thank you again for your patience and help!

NNCa said:
Hi,
I tried all you suggested, however my devide is not recognized. I tried to use the LG PC Suite and to flash by IMEI, however it is still saying that no device was connected.. I checked windows device manager, and nothing changed there.
There is any chnage I can see my connected device? use some tool or another software?
Thank you again for your patience and help!
Click to expand...
Click to collapse
Hi, sorry to say but you have unfortunately completely hardbricked your device. It happened to me too however I was able to get it replaced under warranty at no extra cost.
What happened was that when your phone was still detected by linux, you had a chance to recover by flashing the correct partitions to gain access to download mode and from there, flash a KDZ to go back to complete stock. However, the files you used were probably incompatible with your variant which has now corrupted your bootloader sequence. I suggest you read this reply by fizzy177 as well as the rest of the thread: http://forum.xda-developers.com/showpost.php?p=51522304&postcount=118
So right now, you cannot do anything as you have already found out, no computer will recognise that your phone is plugged in. Your phone fails to boot when you try enter the download mode and it just freezes on the splash screen which looks like this: http://www.lg-phones.org/wp-content/uploads/2014/03/image2.png
What's meant to happen is your phone should load past that initial splash screen into this http://www.androiddunya.com/wp-content/uploads/2014/01/LG-G2-DownloadMode.jpg which accepts KDZ flashing and warns the device has been rooted.
So it's a blessing that your phone cannot boot as LG cannot find out you have voided warranty and you will be able to get a replacement free of charge.

Issue was solved- device was fixed under warranty
Hi,
I just want to update you all that my device was fixed under warranty! (motherboard replacement)
Thank you all for help and great support, this is a great forum with great community :good::good:

Hello
From past 2 weeks i am wondering on internet for a solution . Hours and hours of surfing and articles but still
Hope some one solve this issue.
Okay. First i m using LG G2 F320 K update to lollipop . Non rooted. It was working fine . I can transfer files in MTP .
But about a month ago i get an update for my phone . And after some days i need to transfer some files to my phone , i wonder when i connected my phone to computer nothing happened . No notification on mobile for changing PTP MTP option . Also nothing happened in Computer device manager..
From that day i am unable to connect my phone with windows 10. It always charging mobile.
I uninstalled all drivers in device manager and installed from LG website. I updates windows N and NK MTP update from windows for windows 10.
I changed different data cables and different computers and different ports . All stuff i can do. Still no luck.
When ever i plug USB data cable it always put my Mobile on Charging . No notification on Mobile. Also i go in setting > storage> and there is no option in upper right corner to select USB PC connection .
I am in developer mode and debugging mode is on also. Also USB tethering option is Disabled .
Kindly some one help me regarding this.
LG G2 F320K updated to stock Koren lollipop 5.0.1 . Non root.( i updated lollipop in April 2015)
Issue i am facing is no notification for Charging/ MTP/PTP Usb Debugging on mobile notice bar when i attach my phone using USB cord with computer. Also in computer device manager nothing happen. Even i checked on windows 10 , 8.1, 8, 7 .
I remember it was working like charm 4 weeks before I can change MTP PTP or Charge only mode by selecting notification when i attach it to my laptop. I can transfer files can use LG PC suit .
Then i received an software update like 40 mb and i updated my mobile. That i remembered.
After that 2 weeks before i need to transfer some books from laptop to my mobile. When i plugged my device there no notification to select MTP mode . Also there is nothing happened in my windows 10. I looked in task manager. No yellow icon in computer task manager for driver thing.
Laptop is just silent and mobile is just on charging .
Then i go to setting in LG and looked for USB PC connection settings. I wonder there is nothing . Settings > storage > 3 dot in upper right corner.. it suppose to be there . But here is no 3 dot in storage. Then i looked into share and networks in android setting and i found that USB tethering. But its faded mean it is disabled and i am unable to use this feature also.
I tried on different computers different cables , original, but nothing. Always when i plug usb mobile went on charging and in all computers nothing happen in device manager.
USB debugging is on.. I factory reset device 2 times. but useless. Also i uninstall all drivers from my laptop and then reinstall drivers from LG website also i tried google drivers , ABD, different ports. Nothing nothing happen.
Also now if i try put mobile on download mode by turning device off and then push + vol button and then put cord in mobile . No download mode also it went on charging. Well charging from laptop or from charger is okay.
Hope i explain all.

[Q] Help! Lumia 520 dead during restoring from WP10 preview

So I intstalled the WP10 preview which includes support for the 520, but the settings app didn't work and I couldn't reset the device so I used the Windows Phone Recovery Tool to revert to 8.1. However, as the firmware was about to install, the device went into flash mode (as it does while installing a firmware) and an error dialgue opened on my laptop saying that there was an error. After that my phone's screen went black and its not vibrating or powering on even when connected to a power source. I doubt that it is restorable, but any help would be much appreciated
Thank you guys for letting me know about the link I'm posting it in the OP so that everyone having this issue can upvote on that thread.
Link: https://social.technet.microsoft.co...e-recovery-possible?forum=WinPreview2015Phone

theevilpotato said:
So I intstalled the WP10 preview which includes support for the 520, but the settings app didn't work and I couldn't reset the device so I used the Windows Phone Recovery Tool to revert to 8.1. However, as the firmware was about to install, the device went into flash mode (as it does while installing a firmware) and an error dialgue opened on my laptop saying that there was an error. After that my phone's screen went black and its not vibrating or powering on even when connected to a power source. I doubt that it is restorable, but any help would be much appreciated.
Click to expand...
Click to collapse
I've just got the exact same error and I've spent the last hours trying everything possible and every tutorial to make it work. I'm afraid it's completely bricked. It's not responding to anything, when plugged into the pc it shows up as "QHSUSB_DLOAD" which is usually a very bad sign, and every software recovery or phone recovery tool I've tried from MS and Nokia either don't detect it or say it's not supported.
It's dead.

520? :/ Same here. Time to get a new phone for school, I guess.

Yes, a 520 as well.

Just a heads up, if you give the windows phone subreddit a quick read you'll notice we are not the only people to have this issue. Apparently several other people trying to roll back their phone have it completely bricked and in the QHSUSB_DLOAD situation.
I don't think MS can do anything about it, since the boot crapped out you either need to buy the tools or get it repaired by someone having them, but at least it proves there is some kind of problem with rolling back from the preview.

angstdasein said:
I've just got the exact same error and I've spent the last hours trying everything possible and every tutorial to make it work. I'm afraid it's completely bricked. It's not responding to anything, when plugged into the pc it shows up as "QHSUSB_DLOAD" which is usually a very bad sign, and every software recovery or phone recovery tool I've tried from MS and Nokia either don't detect it or say it's not supported.
It's dead.
Click to expand...
Click to collapse
same here

After a bit of reading more and more people are reporting this, so please put your own experience on this technet thread, it's a good idea to centralize reports where Microsoft can see it.
I can't link it here (don't have the permission to post links yet) but it's the first result by typing "Lumia 620 bricked during rollback procedure: recovery possible?" in google.

NL525 w/ red screen here.
feherneoh, pls make tutor!

feherneoh said:
Here it is:
...
Click to expand...
Click to collapse
Praise the Lord feherneoh!
Greatest thanx to ya!

Same error here, black screen and phone do nothing.
Tried with Thor2 but didn't work.

azogh said:
Same error here, black screen and phone do nothing.
Tried with Thor2 but didn't work.
Click to expand...
Click to collapse
Be sure using good cable. Try few times (i did 3)

[QRCODE][/QRCODE]The same problem with L520. There is already post on Technet regarding this problem
You can search Google by typing in: QHSUSB_DLOAD technet
Please upvote, then we would have some respond from Microsoft, maybe alternative driver, tool or something...

My Nokia does not turn on
The same problem! My Nokia does not turn on. I've tried everything! Any solution?

rickmaran said:
The same problem! My Nokia does not turn on. I've tried everything! Any solution?
Click to expand...
Click to collapse
I don't think there is a solution yet. Just keep and eye on this and hope for the best: https://social.technet.microsoft.co...e-recovery-possible?forum=WinPreview2015Phone

Have you anyone has try using Lumia Recovery Tool ?
1. Download ffu saperatly. (8.1 GDR1)
2. Install Lumia Software Recovery Tool.
3. Launch recovery tool.
4. Remove battery, usb, device.
5. Select my phone doesn't respond in recovery tool.
6. Insert battery, usb, plug it to pc.
7. A- Press and hold volume down.
B- Press and hold Power + volume down
8. Flash it.
Hope this will work.

feherneoh said:
Here it is:
1: Find your Recovery Tool folder on your harddisk. Mine is "C:\Program Files (x86)\Microsoft Care Suite\Windows Phone Recovery Tool"
There should be a file called thor2.exe there.
2: Open an administrator command prompt here
3: Find the ROM Recovery Tool downloaded. Should be in "C:\ProgramData\Microsoft\Packages\Products"
You will need the FFU file for your device.
Mine is "C:\ProgramData\Microsoft\Packages\Products\rm-914\RM914_3058.50000.1425.0005_RETAIL_eu_hungary_429_05_443088_prd_signed.ffu"
4: To flash your device with THOR2, enter this to commandline:
Code:
thor2 -mode uefiflash -ffufile "C:\ProgramData\Microsoft\Packages\Products\rm-914\RM914_3058.50000.1425.0005_RETAIL_eu_hungary_429_05_443088_prd_signed.ffu"
Replace filename with your own
5: After flashing completes, reboot your phone by entering this:
Code:
thor2 -mode rnd -bootnormalmode
Click to expand...
Click to collapse
It says this error:
THOR2 1.8.2.14 exited with error code 393220 <0x60004>
Click to expand...
Click to collapse

zuchit said:
It says this error:
Click to expand...
Click to collapse
Same case

Same problem with DLOAD
The solution seems to do a JTAG... Bad news for normal people ::crying:

Bricked Nokia Lumia
Actually, the red screen means that the phone went into its UEFI MODE.
In UEFI MODE your phone could be restored as normal by a HARD RESET (see key combo).
If you have a hard luck, your phone will automatically start in Flashing Mode (IMO(0x0000001)) which only works on the downloading procedure when on Rolling back.
The RollBack program has to put your phone in Flashing Mode in order to gain access to it's microchip.
Well the app itself knows what to do, but something failed.
In this point, you disconnected the phone and tried all you've known to power it on. Meanwhile the app deleted it's cache file, it no longer knows why your phone is in that state and your PC will get it as QHSUSB_DLOAD which is a Side_Load driver for Qualcomm Enabled Phones.
At this point, RIFF JTAG is the only solution as your BOOTLOADER is dead.
Good thing? It could be fixed by any GSM Service and the price could be small.
DO NOT try any Nokia Care / Refurbish / Restore app. All of them are created to work with a phone that has it's bootloader working.
None of them will cooperate to reflash it.
Even if you manage to reflash the OS, you don't have a BIOS / BootLoader....
Hopefully, Microsoft will create a tool to fix this as it only occurs when Rolling Back from Windows 10 Tech. Prev. and 8.1 to 8.
But until that, your phone is dead.
Source of info: I'm working as an G.S.M. RepairMan.

feherneoh said:
Maybe some error message before this?
Click to expand...
Click to collapse
at the moment, i get this error when i cmd thor right after connecting phone to usb. (screenshot 1)
i58.tinypic. com/2qnz51d.jpg
Click to expand...
Click to collapse
these is what it says when i try cmd thor after red screen with Nokia logo appers.. (screenhot 2)
i61.tinypic. com/jkftq8.jpg
Click to expand...
Click to collapse

Possibly dead boot MP Rio, Help/Suggestions Please T.T

So apparently, I went home and usually put my phone into my desk.
While I took it from my pocket, I noticed the hardware buttons were lit but no display, I removed the battery to restart, during the week, frozen screen were occurring a dozen times when playing Clash, that though I didn't mind I just said to myself I will reflash the rom in the weekend.
But up to now,
It won't turn on, recovery mode or anything also doesn't work
It wont charge
Tried a new battery but still no luck
I think PC reads it but SPFT wont
Any suggestion on how I can revive my phone?
Attached is the error I get from SPFT

I don't own the A120 anymore. That is almost similar to this, as you might know.
Anyway, as nobody has answered your question, I will try to help as much as I can.
Does it give you a haptic feedback(vibration) when you try to power on the device?
Are you saying that it won't turn on completely?
If it is being detected on the computer and not on SPFT, you might want to check with the drivers you have. Do you have the MTK VCOM drivers installed? (I'm not really sure about the name, but it was something like that).
And try flashing the Stock ROM with SPFT with your battery removed from the phone.
Download the drivers.
Connect your phone without the battery and keep your device manager open, if it shows a device with a yellow exclamation mark beside it, right click and click on properties. You will have to do this quickly.
Once that is done, go to driver tab on the properties window. Select Update Driver. Browse my computer and enter the location of your downloaded and unzipped drivers.
(You might get a digital signature error or something similar. I'll tell you how to bypass that in the end. If you get that, go to the end, follow those steps and then come back and do all the steps after the downloading part.)
If the drivers are successfully installed, then unplug your device, run the SPFT and load the Scatter file of the Stock ROM.
Now select Download only and start the download, it will wait for you to connect the phone.
Plug in your phone without the battery. This should initialize the download process.
Now wait for the flash to be completed and if it is successful, take out your phone and boot it. If it boots up, congratulations.
If it does not, flash the same ROM the same way another time and check, if it is still not working, try with Firmware upgrade mode, twice. It should work in those tries.
Digital Signature Error bypassing.
I know only one method which works on Windows 8 and above(Tested).
Hold the Shift key while pressing Reboot.(Yes, you have to reboot your PC)
Once there is a blue screen with options, you should see "Troubleshoot". Select that.
Then Advanced Options and then Start Up settings. Then press Restart.
This will show you a menu with a lot of options. Select the option number which says "Disable Driver Signature Enforcement".
This will log you into the PC normally, but now, you can go back and do all the steps again and you won't get an error.
Cheers!
If this still doesn't help you, let me know on what happens so I can try to get you back your phone. Hope this helps.

WalterWh1te said:
I don't own the A120 anymore. That is almost similar to this, as you might know.
Anyway, as nobody has answered your question, I will try to help as much as I can.
Does it give you a haptic feedback(vibration) when you try to power on the device?
Are you saying that it won't turn on completely?
If it is being detected on the computer and not on SPFT, you might want to check with the drivers you have. Do you have the MTK VCOM drivers installed? (I'm not really sure about the name, but it was something like that).
And try flashing the Stock ROM with SPFT with your battery removed from the phone.
Download the drivers.
Connect your phone without the battery and keep your device manager open, if it shows a device with a yellow exclamation mark beside it, right click and click on properties. You will have to do this quickly.
Once that is done, go to driver tab on the properties window. Select Update Driver. Browse my computer and enter the location of your downloaded and unzipped drivers.
(You might get a digital signature error or something similar. I'll tell you how to bypass that in the end. If you get that, go to the end, follow those steps and then come back and do all the steps after the downloading part.)
If the drivers are successfully installed, then unplug your device, run the SPFT and load the Scatter file of the Stock ROM.
Now select Download only and start the download, it will wait for you to connect the phone.
Plug in your phone without the battery. This should initialize the download process.
Now wait for the flash to be completed and if it is successful, take out your phone and boot it. If it boots up, congratulations.
If it does not, flash the same ROM the same way another time and check, if it is still not working, try with Firmware upgrade mode, twice. It should work in those tries.
Digital Signature Error bypassing.
I know only one method which works on Windows 8 and above(Tested).
Hold the Shift key while pressing Reboot.(Yes, you have to reboot your PC)
Once there is a blue screen with options, you should see "Troubleshoot". Select that.
Then Advanced Options and then Start Up settings. Then press Restart.
This will show you a menu with a lot of options. Select the option number which says "Disable Driver Signature Enforcement".
This will log you into the PC normally, but now, you can go back and do all the steps again and you won't get an error.
Cheers!
If this still doesn't help you, let me know on what happens so I can try to get you back your phone. Hope this helps.
Click to expand...
Click to collapse
Thanks bro, but I already gave up and bought a new one because I badly need an android device for my mini accounts in CoC. Haha but I am till trying to revive my Rio during my free time, this has been my phone for 1 1/2 year..
Yes I am aware that Rio is rebranded A120, I also asked from CM12.1 and AOSP LP Wiko Rainbow threads and some suggested help. Tried all that but still same errors.
No, there's no response of any kind including vibration when turning on. Hmn, as per the drivers, I've been using Tinno Driver since the jelly bean era of this phone, no problems or whatsoever from jb to kk to lp using that driver, so I thought there would be no problems. Still no luck in getting success. Using different versions of SPFT, using sp flashable Rio jb, kk, MMX A120 jb, kk, Wiko kk,lp stock roms, still no luck. Tried every port and cord. And I am using the Win7 64bit, I also resorted to MTK drivers, both the preloader and Da. Still.. No luck. Haha. I also tried, download only, format all+download, and firmware upgrade option with every possible combination from above but no success..
Thanks for your answer btw!

willing to pay $

hi, i have s7 edge sm-g935a pk1 and i got tired from trying to fix it. it got stuck on at&t logo and i tried everything! i found in this forum.
i odin it successfully and nothing.
when im in recovery mode i get: "dm-verity verification failed " and "update from external storage is disabled"
please help meeeee
thanks

What is broken?

Hi,
To fix this, you need to use an application called Samsung smart switch on your computer.
1. Download Samsung smart switch onto your computer and install.
2. After it finishes installing, plug your device into your computer using your USB charging cable.
3. On your device boot into the bootloader by pressing, power+volume down+home.
4. When you get to the bootloader it will warn that installing a custom OS may harm your device. Ignore this and press the home button.
5. You will see a few different barcodes and numbers. Copy down the ones labelled S/N (or SN) and IEMI.
6. Now, press home again and stay in the bootloader. Copy down the model number of your phone displayed in the top left corner of the screen.
7. Smart switch will not recognize the phone, but it will still work.
8. In smart switch, click more, then Emergency Software Recovery and Initialization.
9. Where it says Model name, type in your model number. (Ex. SM-G935A)
10. Click search, then type in the S/N or SN number that you copied down from before.
11. Click OK, and when the dialog window comes up, click ok again.
12. A dialog box will appear that shows what is going to be installed on your phone. Click OK.
13. Yet another dialog box will appear telling you to enter the bootloader. If the OK is grayed out double check that your device is plugged into your computer. If it is not, plug it in. If it is, unplug it from your computer and plug it back in. The drivers may install, but eventually the OK will turn blue.
14. Click Ok. It will download the required firmware. This may take some time. DO NOT UNPLUG YOUR DEVICE.
15. When it is done downloading it will flash onto your device.
16. Your device will restart after flashing and the boot will take some time.
Your phone will be factory restored during this process. If it doesn't work follow the steps again but very carefully. Here is a video that you can use to help you out:
I will not accept any money that you offer me as I have been through this situation before and I understand the struggle and stress that it may cause.
TomatoesOnBluRay

thanks
TomatoesOnBluRay said:
Hi,
To fix this, you need to use an application called Samsung smart switch on your computer.
1. Download Samsung smart switch onto your computer and install.
2. After it finishes installing, plug your device into your computer using your USB charging cable.
3. On your device boot into the bootloader by pressing, power+volume down+home.
4. When you get to the bootloader it will warn that installing a custom OS may harm your device. Ignore this and press the home button.
5. You will see a few different barcodes and numbers. Copy down the ones labelled S/N (or SN) and IEMI.
6. Now, press home again and stay in the bootloader. Copy down the model number of your phone displayed in the top left corner of the screen.
7. Smart switch will not recognize the phone, but it will still work.
8. In smart switch, click more, then Emergency Software Recovery and Initialization.
9. Where it says Model name, type in your model number. (Ex. SM-G935A)
10. Click search, then type in the S/N or SN number that you copied down from before.
11. Click OK, and when the dialog window comes up, click ok again.
12. A dialog box will appear that shows what is going to be installed on your phone. Click OK.
13. Yet another dialog box will appear telling you to enter the bootloader. If the OK is grayed out double check that your device is plugged into your computer. If it is not, plug it in. If it is, unplug it from your computer and plug it back in. The drivers may install, but eventually the OK will turn blue.
14. Click Ok. It will download the required firmware. This may take some time. DO NOT UNPLUG YOUR DEVICE.
15. When it is done downloading it will flash onto your device.
16. Your device will restart after flashing and the boot will take some time.
Your phone will be factory restored during this process. If it doesn't work follow the steps again but very carefully. Here is a video that you can use to help you out:
I will not accept any money that you offer me as I have been through this situation before and I understand the struggle and stress that it may cause.
TomatoesOnBluRay
Click to expand...
Click to collapse
first of all thank you!
for some reason i cant get over 11 (after i press ok the first time the smartswitch just closed)
what am i doing wrong?

ofir001 said:
first of all thank you!
for some reason i cant get over 11 (after i press ok the first time the smartswitch just closed)
what am i doing wrong?
Click to expand...
Click to collapse
Im not exactly sure what you're doing wrong. Refer to the video I linked at the bottom if you are having any issues.

I have the same problem I can't get over 11 (after i press ok the first time the smartswitch just closed). I have tried removing and reinstalling smart switch but it does the same thing.

Take it to get reflashed at best buy, talk to the samsung rep there.