Database Users

bricked phoe100 shadow t mobile !!

i received a bricked shadow t mobile !! (phoe100) and i m not sure if its sw or hw problem !! if i try to power on i get no reaction at all ! do this phone has special emergency boot mode or something like ? or is it hw problem ?
thx for help
br

Did you charge it first?

tonyc0642 said:
Did you charge it first?
Click to expand...
Click to collapse
yes but it won t charge !
br

1) remove a battery
2) connect device without battery to a charger, or a PC via USB-cable
3) insert a battery
also try
1) remove battery
2) press ans hold a Camera buttin and connect to a PC via usb cable
3) tricolor screen should appear
please feedback

tri color screen
Hello i have a shadow on the Tri Color Screen, how can i flash the firmware to it.
thanks

just download T-Mobile SHadow rom and follow steps. You'll be able to recover your device without problems

ThanKs
I follow the instructions of the menber and was successful. Thanks!

[Q] Bricked my galaxy 3

Hello yesterday when i was flashing a custom ROM Odin hanged at facroryfs.rfs.
I pulled my cable out and rebooted the phone by pulling out the battery but now the phone won't start even in download mode the screen just stays black.
noting helps usb cable, loading the phone , ..
Do you have any idea how to fix this?

timothywer said:
Hello yesterday when i was flashing a custom ROM Odin hanged at facroryfs.rfs.
I pulled my cable out and rebooted the phone by pulling out the battery but now the phone won't start even in download mode the screen just stays black.
noting helps usb cable, loading the phone , ..
Do you have any idea how to fix this?
Click to expand...
Click to collapse
Try recovery mode, but probably it won't work neither. Try also removing sim and sdcard... In such cases, when you cannot start the phone in any mode, the Samsung service is the only solution...

ok. can it be done under warranty?
what do i say to samsungg service?

timothywer said:
Hello yesterday when i was flashing a custom ROM Odin hanged at facroryfs.rfs.
I pulled my cable out and rebooted the phone by pulling out the battery but now the phone won't start even in download mode the screen just stays black.
noting helps usb cable, loading the phone , ..
Do you have any idea how to fix this?
Click to expand...
Click to collapse
umm. i had the same prb thrice.. odin hanged.. but i ws able to start my g3 in download mode.. dunno wht hppnd to urs..

probably the bootloader wasn't flashed when i pulled the cable out.
So there is no bootloader on my device so it doesn't start

timothywer said:
ok. can it be done under warranty?
what do i say to samsungg service?
Click to expand...
Click to collapse
I guess this is covered by warranty... you can say the phone crashed after reboot or after using Kies.

hamsiro said:
I guess this is covered by warranty... you can say the phone crashed after reboot or after using Kies.
Click to expand...
Click to collapse
I can possibly purchase the phone off you. If nothing can be resolved by yourselves!

Tell samsung it crashed while updating with Kies

Hard bricked i9300i

hi friends.
i have a gt i9300i yesterday it was fine yesterday... unfortunately its dead now..
when i connect to pc no driver popup or unrecognized usb error shows...
kindly help me what should i do? i have tried turing on cell with another battery but same problem...
help me asap.. :/

Recovery or download mode works?

bombinson2009 said:
hi friends.
i have a gt i9300i yesterday it was fine yesterday... unfortunately its dead now..
when i connect to pc no driver popup or unrecognized usb error shows...
kindly help me what should i do? i have tried turing on cell with another battery but same problem...
help me asap.. :/
Click to expand...
Click to collapse
So your phone didn't turn on? Or it was stuck in boot? What were you doing when your mobile turned to be dead????

Arsal7R said:
So your phone didn't turn on? Or it was stuck in boot? What were you doing when your mobile turned to be dead????
Click to expand...
Click to collapse
its not stuck in boot.. its completely dead.. i was backuping up efs with EFS professional tool... when backup complete i just removed battery without powering off phone... and then PHONE gone dead no usb response or Bootloader response.. :/

bombinson2009 said:
its not stuck in boot.. its completely dead.. i was backuping up efs with EFS professional tool... when backup complete i just removed battery without powering off phone... and then PHONE gone dead no usb response or Bootloader response.. :/
Click to expand...
Click to collapse
Oh..... i think its dead now but take it to a repair shop. May be there are some chances for you.

Lenovo A3500-HV Bricked while flashing ROM ( Cable disconnected )

OS : Windows 8.1 (With drivers successfully installed ) X64
Also tried on Windows 7 (With drivers successfully installed ) X86
Using SP flash tool
The device had this ROM : A3500HV_A442_01_37_140920_ROW
and it is the same I was trying to flash
Hi all , My lenovo A3500-HV went crazy and I had to re-install the rom ..
but while flashing using SP ( all drivers are OK ) the goddamn cable disconnected at about 15% - 20% from total progress
CURRENT STATE :
DEAD :'(
can't power up , nothing happens after pressing power button
can't go into recovery mode or download mode ( nothing happens when pressing VOL UP & Power , VOL UP & DOWN & Power or any other sequence )
it is not charging when I put it on the charger or the USB
is not being recognized when I plug it in ( see attachments please ) !!
device manager screen shot attached please have a look
-----
any hope it can revive ?? , how ??
or just go to the warranty ( really few days left ) .. note that it was rooted device .. ( ( will they ever detect the root if the device is dead ? ) )​

up

up

Help my update
ebram96 said:
up
Click to expand...
Click to collapse
I Have same problem. Did you have ANY SOLVE ?:angel:

I have same problem too,,Did you find any solution??

p.m.6 said:
I have same problem too,,Did you find any solution??
Click to expand...
Click to collapse
Look the device was stuck at boot but showing nothing on screen .. so I waited till it has 0% battery and re-flashed the rom successfully .. if you still having problems text me I may help

i have the samy problem
i have the same problem but i dont know how to fix it

ebram96 said:
Look the device was stuck at boot but showing nothing on screen .. so I waited till it has 0% battery and re-flashed the rom successfully .. if you still having problems text me I may help
Click to expand...
Click to collapse
is it really works? but i cant even see the screen backlight is turned on. was it the same with yours? how would you know when the battery level is 0%?
then after (we believe) the battery level is 0% you just connect your tab to your computer to make it show up with COM X connection, correct?
hope it really works and not a coincident (':

kakung said:
is it really works? but i cant even see the screen backlight is turned on. was it the same with yours? how would you know when the battery level is 0%?
then after (we believe) the battery level is 0% you just connect your tab to your computer to make it show up with COM X connection, correct?
hope it really works and not a coincident (':
Click to expand...
Click to collapse
YES , the tab backlight was off and there was not any sign of it working and then I lost hope and left it for a while and then I tried the charger and it was recharging so I tried flashing and it worked just fine

Lenovo A3500 bricked, "USB device not recognized"
ebram96 said:
YES , the tab backlight was off and there was not any sign of it working and then I lost hope and left it for a while and then I tried the charger and it was recharging so I tried flashing and it worked just fine
Click to expand...
Click to collapse
Lenovo A3500FL_A422 bricked, "USB device not recognized" when connected to windows, could not flash it using SP Flash Tool.
After disconnected the battery, flash process begun and was OK.
Thanks !

i have the same problem as yours
after i disconnect battry and flash rom it gets error while flashing on 20%
what should i do ?
:crying:
error : S_FT_DOWNLOAD_FAILD (4008)

arshiyah53 said:
i have the same problem as yours
after i disconnect battry and flash rom it gets error while flashing on 20%
what should i do ?
:crying:
error : S_FT_DOWNLOAD_FAILD (4008)
Click to expand...
Click to collapse
i'm manage to get on 40%
but it stuck in that.
error : S_FT_DOWNLOAD_FAILD (4008)
show up.
change the cable, change pc to laptop,
noting happen.
any sugestion?

Asus Zenfone 5 Bricked.

I have bricked my zenfone 5 accidentally. Somehow i flash my fastboot with a wrong file and now my phone is not staring...only showing a usb sign and then it shutting down. i couldn't even enter into the fastboot...please help me...and one thing when i plug my phone into my computer it showing some cloverview devices. i have tried everything....but nothing works...please help me ...

dypd said:
I have bricked my zenfone 5 accidentally. Somehow i flash my fastboot with a wrong file and now my phone is not staring...only showing a usb sign and then it shutting down. i couldn't even enter into the fastboot...please help me...and one thing when i plug my phone into my computer it showing some cloverview devices. i have tried everything....but nothing works...please help me ...
Click to expand...
Click to collapse
try this
https://www.youtube.com/watch?v=811PAOMuhis:)

I have the same problem but no usb logo is showing, full dead phone but is still detected by my computer, can somebody help me?

Rikkuzen193 said:
I have the same problem but no usb logo is showing, full dead phone but is still detected by my computer, can somebody help me?
Click to expand...
Click to collapse
yes same problem pal. there is showing clover view