Help please! - Advantage X7500, MDA Ameo General

I was trying to update my Athena to wm6. I got errors 270 so i tried to update the spl as i read on the forum. I stupiditly updated the x7510 spl so i think i really screw it up.
Results:
When I try to open it it shows nothing. The joysticks light is just on.
I can enter bootloader. It says:
ATHE400
IPL-v1.00
ATHE400
SPL-3.65.0 Ol iNex
I cant do anythink at this point. Any flash i use it gives me an invalid device id. I also tried the Athena Unlocker but it gives me the same error.
Is there any way to make it live again? Please help me I am desperate.

I did the same thing. And I am also desperate Happy not to feel alone :O But i think no reply for this one... Olinexx help us please...

to: palamosteliaro
this thread started by ggursel seems to have solved that problem. hope that helps
http://forum.xda-developers.com/showthread.php?t=502682

Related

herm100 drving me crazy plz help

herm100 ipl-1.01 spl-1.09
i can not flash this herm i ben looking every where 2 found a working soloution and no luck so let us share informations about it hope that will help me and otheres on this nice pro forum
thank u all
You've not told us much about your phone/device or what you've done so far. I'd suggest you use the links below my sig to visit the WIKI and MR Vanx Upgrade Guides. Read through these areas, they will give you all in info you'll need to get started.
sorry 4 not exp much the mob stuck on the first screen and the only way my comp see it is by boot mode and i have recive it like that i think someone was trying 2 put frensh lang on it
hassan35278 said:
sorry 4 not exp much the mob stuck on the first screen and the only way my comp see it is by boot mode and i have recive it like that i think someone was trying 2 put frensh lang on it
Click to expand...
Click to collapse
www.mrvanx.org
These are great guides. The only difference is you need to start in bootloader mode, since you say it is there, and manually choose the bootloader version when prompted by the updater program.
OR, you can use SD Card method. Good luck.
Also, DEFINITELY read up in the forums and wiki, as stevebonning suggested. Could save you much trouble later.
cant get my head arround it when i try 2 flash it with the same boot loader got mess like can not comunicate with mob can plz somone give me a sample inst plz need help with that
tx
i read it all but it appear that i cant downgroad thw spl while the phone in boot mode and this is the only way my comp see it cause the mob stuck on the first screen please help what sheel i do to make the downgroad take place in boot mode please help im waiting
tx
Read this:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Match your SPL and symptoms to the list, then do what it says.
thanks 4 reply i did all that but the problem is i cant flash it with Hard-SPL-V7 becayse as i said the phone is in boot mode and stuck on first screen please help
tx
still waitaing for ur help please reply im willing 2 try everything i need 2 get this mob working again
tx
I don't think you're going to get a better reply until you explain exactly what you have done, and what exactly you have done to try to fix it. These short 1-line messages saying "it doesn't work, i tried everything" are not going to cut it.
as i said before i the updater always come with error 262 communication errorsduring the update process .as i said someone try 2 flash it with frensh lang before im using hard spl v7 and Satin Medium but no luck always same error after 0%complete it on the white screen please help
tx
hassan35278 said:
as i said before i the updater always come with error 262 communication errorsduring the update process .as i said someone try 2 flash it with frensh lang before im using hard spl v7 and Satin Medium but no luck always same error after 0%complete it on the white screen please help
tx
Click to expand...
Click to collapse
Well, I did not go back and read the thread, but have you tried SD Card flashing method. You will not get a 260 Comm Error.

Urgent Help Needed Please! "No-Gsm" BRICKED?

i posted this in another thread but no one replied so thought this one mite be more busy.
i am new to all this and i stupidly went running into things and tryed to ROM upgrade my t-mobile MDA Vario II (HERM300), not knowing i had to CID unlock first, it has broke! when i boot it up i can not get passed the t-mobile splash screen and it also flashes "no-gsm". i have read many suggestions on fixing this but i have had no luck. i can get into the boot screen however and get the red green and blue stripes.
i have IPL 1.01 and SPL 1.04.
it will allow me to connect to my PC with USB but active-sync does not recognize i have connected the phone.
please help someone. i just need a way i can get this thing working again. if i could just get the phone into a state of use again that would be good.
please help, at least let me know if Ive got a chance of repairing it
i believe if you can get it in to bootloader mode you can flash back to original rom and start over
i thought that to but when i tryed the t-mobile rom it said "connection error" and also said it should be connected through active sync. but then agen it mite of been the wrong t-mobile rom but im sure it was for the vario ii. do you have a link to the one i should try please?
i downloaded the official UK shiping rom from t-mobile site and upgrading now through bootloader. will report on what happens.....
nope, keep getting "device not responding" or "connection error". any other sugestions?
i looked on here http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick and it says that i have to "Flash any type2 radio in NBF format. If that doesn’t work, flash the radio using HERMflasher" please could someone tell me how to do this, if this is the solution to my problem or if there is another way around this. thanks.
please help someone i realy need to fix my phone
Cool down....
what's ur radio version?
Also have u read this? http://wiki.xda-developers.com/index.php?pagename=Hermes_SimUnlock - TRY THIS FIRST, before attempting anything else...
ok, i have tryed that "sim and cid unlocker" and i beleve that you have to connect with active-sync because when i tryed it when i was in boot loader it said that it was not connected but it was. i will get my radio version now.
EDIT: my radio version is: 0107
EDIT2: also, here are some other numbers (which i dont know what they mean but mite be needed) which apear on boot-up t-mobile splash screen, in red letters/numers, just before "no-gsm" flashes on:
M 05
S 04
B 06
D 1.21
If you can get into the Bootloader (Rainbow Screen) you should be okay (Not a Brick)
Go download a Radio Rom from the wiki.
Enter Bootloader first, then connect to PC. Then flash the Radio Rom.
Edit, Also Read: http://forum.xda -developers.com /showthread.php?t=296722
berdinkerdickle said:
If you can get into the Bootloader (Rainbow Screen) you should be okay (Not a Brick)
Go download a Radio Rom from the wiki.
Enter Bootloader first, then connect to PC. Then flash the Radio Rom.
Edit, Also Read: http://forum.xda -developers.com /showthread.php?t=296722
Click to expand...
Click to collapse
ok, ill try that, does it need to be a perticular radio because im not super CID? for some reason the link will not work.
oooooo, it seems to be workin!!!!!!!!! im at...16%. ill report what happens after update finished
yes!!! it worked!! thank you very very much for your help!!!

Need help upgrading bootloader - 2.03 to 2.10

Hi guys, you have been a great help to me so far, but I just can't find anythign to help me with this now. I have a hermes100 with WM6 and i just flashed the radio to 1.54.07 and it gave me an option for hardSPL and said that it was recommended so i investigated and found the upgrade for it.
I ran the wrapper file and it goes to the stage where it puts my hermes into flash mode but it displays "spl1.09" on the screen yet when push the ok and power keys during reset it shows "spl2.03"
it goes through the screens until it puts my phone into flash mode and it says it is trying to read my device then i get error code (260) that it isnt connected. Anyone know a way to fix this?
Use sd card method, page 116 on here: http://forum.xda-developers.com/showthread.php?t=296722
Hope this helps...Cheers...
okay, i tried the sd card method and it does the same thing. after it gets to the bootloader screen i just sits there with
"HERM100
IPL-SSPL by des
HERM 100
SPL-109.ds
serial"
okay, nevermind, i just had to reinstall the drivers for when i was in bootloader mode. I got it to work, thank you for you help.
cheers :-D
No problem, now you should be able to flash any hermes rom to your hearts content with the knowledge you have a safety net if something does(and probably will, as you'll find flashing addictive, sooner or later) go wrong. Pleae remember though that Hard SPL ISN'T a guarantee that you will be able to fix you phone, it just makes it easier when something goes wrong... Cheers....and happy flashing...
samterry1234 said:
okay, nevermind, i just had to reinstall the drivers for when i was in bootloader mode. I got it to work, thank you for you help.
cheers :-D
Click to expand...
Click to collapse
how did you do this?

Help guys! anyone....

This is the story:
I bricked my phone (Elf) because I didn't CID unlock it after installing the Opal 6.1 rom. So when I tried to install the backup ROM I made it got bricked. I read all the threads about how to revive the phone and I can't get any to work.
I can't do the GoldCard since I don't have a working WM phone. So I tried the Wild card unbricker ROM and the phone got worse. Now I only get to the tri color screen without any "RUU" at the top and every time I try to flash another ROM on it it shuts and I get an error message saying something like "Invalind vendor or error in image" etc... Please help me, what happend??? I cant flash any ROM. I cant do hardspl. I can't do anything.
PLEASE HELP ME! Anyone who's familiar to this problem?
Thx in advance!

plz help me my charmer doesnt work

hi ,
i flased the tmobile rom with ur given link now it doesnt go past the initial screen
all it says is
ipl 3.08
spl 3.08
gsm 02.69.21
os 3.8.2.21
and stays ter all day until battery goes dead.
i can get into bootloder mode
please help me let me know hw can i get my phone up and running.
it says format failed
thx fr ur reply but i have tried this it doesnt work.
have this info it might help u :
when i try t format by pressing power+record +camera
it says fail to format.....
so let me know wat to do , any wayz thx for paying intrest to help me out .
You say format failed? Then forget your Device. We have only one case of reported fix for that. But the fix has never worked again. So I think your Device is dead.
so no way of getting it back ??? plz there should be some way yea ???
We don't have any way reported to work more then one time. I'll do some research for you but I think it is hopeless.
same thing here on one charmer ... I can enter bootloader, can flash a rom - t-mobile english versinon WM5. but device hangs while booting and on hardreset format fails.
Is it possible to flash another rom that works? whitch rom?
To reply:
It can be Hardware fail but I don't think so. At this moment we don't have a fix but I have some ideas. To test them I'm at the moment talking to an other person with that problem. Till now we don't have any good news but we are still working. Maybe there is hope soon.

Categories

Resources