herm100 drving me crazy plz help - 8525, TyTN, MDA Vario II, JasJam General

herm100 ipl-1.01 spl-1.09
i can not flash this herm i ben looking every where 2 found a working soloution and no luck so let us share informations about it hope that will help me and otheres on this nice pro forum
thank u all

You've not told us much about your phone/device or what you've done so far. I'd suggest you use the links below my sig to visit the WIKI and MR Vanx Upgrade Guides. Read through these areas, they will give you all in info you'll need to get started.

sorry 4 not exp much the mob stuck on the first screen and the only way my comp see it is by boot mode and i have recive it like that i think someone was trying 2 put frensh lang on it

hassan35278 said:
sorry 4 not exp much the mob stuck on the first screen and the only way my comp see it is by boot mode and i have recive it like that i think someone was trying 2 put frensh lang on it
Click to expand...
Click to collapse
www.mrvanx.org
These are great guides. The only difference is you need to start in bootloader mode, since you say it is there, and manually choose the bootloader version when prompted by the updater program.
OR, you can use SD Card method. Good luck.
Also, DEFINITELY read up in the forums and wiki, as stevebonning suggested. Could save you much trouble later.

cant get my head arround it when i try 2 flash it with the same boot loader got mess like can not comunicate with mob can plz somone give me a sample inst plz need help with that
tx

i read it all but it appear that i cant downgroad thw spl while the phone in boot mode and this is the only way my comp see it cause the mob stuck on the first screen please help what sheel i do to make the downgroad take place in boot mode please help im waiting
tx

Read this:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Match your SPL and symptoms to the list, then do what it says.

thanks 4 reply i did all that but the problem is i cant flash it with Hard-SPL-V7 becayse as i said the phone is in boot mode and stuck on first screen please help
tx

still waitaing for ur help please reply im willing 2 try everything i need 2 get this mob working again
tx

I don't think you're going to get a better reply until you explain exactly what you have done, and what exactly you have done to try to fix it. These short 1-line messages saying "it doesn't work, i tried everything" are not going to cut it.

as i said before i the updater always come with error 262 communication errorsduring the update process .as i said someone try 2 flash it with frensh lang before im using hard spl v7 and Satin Medium but no luck always same error after 0%complete it on the white screen please help
tx

hassan35278 said:
as i said before i the updater always come with error 262 communication errorsduring the update process .as i said someone try 2 flash it with frensh lang before im using hard spl v7 and Satin Medium but no luck always same error after 0%complete it on the white screen please help
tx
Click to expand...
Click to collapse
Well, I did not go back and read the thread, but have you tried SD Card flashing method. You will not get a 260 Comm Error.

Related

Urgent Help Needed Please! "No-Gsm" BRICKED?

i posted this in another thread but no one replied so thought this one mite be more busy.
i am new to all this and i stupidly went running into things and tryed to ROM upgrade my t-mobile MDA Vario II (HERM300), not knowing i had to CID unlock first, it has broke! when i boot it up i can not get passed the t-mobile splash screen and it also flashes "no-gsm". i have read many suggestions on fixing this but i have had no luck. i can get into the boot screen however and get the red green and blue stripes.
i have IPL 1.01 and SPL 1.04.
it will allow me to connect to my PC with USB but active-sync does not recognize i have connected the phone.
please help someone. i just need a way i can get this thing working again. if i could just get the phone into a state of use again that would be good.
please help, at least let me know if Ive got a chance of repairing it
i believe if you can get it in to bootloader mode you can flash back to original rom and start over
i thought that to but when i tryed the t-mobile rom it said "connection error" and also said it should be connected through active sync. but then agen it mite of been the wrong t-mobile rom but im sure it was for the vario ii. do you have a link to the one i should try please?
i downloaded the official UK shiping rom from t-mobile site and upgrading now through bootloader. will report on what happens.....
nope, keep getting "device not responding" or "connection error". any other sugestions?
i looked on here http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick and it says that i have to "Flash any type2 radio in NBF format. If that doesn’t work, flash the radio using HERMflasher" please could someone tell me how to do this, if this is the solution to my problem or if there is another way around this. thanks.
please help someone i realy need to fix my phone
Cool down....
what's ur radio version?
Also have u read this? http://wiki.xda-developers.com/index.php?pagename=Hermes_SimUnlock - TRY THIS FIRST, before attempting anything else...
ok, i have tryed that "sim and cid unlocker" and i beleve that you have to connect with active-sync because when i tryed it when i was in boot loader it said that it was not connected but it was. i will get my radio version now.
EDIT: my radio version is: 0107
EDIT2: also, here are some other numbers (which i dont know what they mean but mite be needed) which apear on boot-up t-mobile splash screen, in red letters/numers, just before "no-gsm" flashes on:
M 05
S 04
B 06
D 1.21
If you can get into the Bootloader (Rainbow Screen) you should be okay (Not a Brick)
Go download a Radio Rom from the wiki.
Enter Bootloader first, then connect to PC. Then flash the Radio Rom.
Edit, Also Read: http://forum.xda -developers.com /showthread.php?t=296722
berdinkerdickle said:
If you can get into the Bootloader (Rainbow Screen) you should be okay (Not a Brick)
Go download a Radio Rom from the wiki.
Enter Bootloader first, then connect to PC. Then flash the Radio Rom.
Edit, Also Read: http://forum.xda -developers.com /showthread.php?t=296722
Click to expand...
Click to collapse
ok, ill try that, does it need to be a perticular radio because im not super CID? for some reason the link will not work.
oooooo, it seems to be workin!!!!!!!!! im at...16%. ill report what happens after update finished
yes!!! it worked!! thank you very very much for your help!!!

how to downgrade athena100 spl-v1.20oilpro to factory defalt plz help me????

i have ATHENA 100 in T-MOBILE Ameo........ i update lot of rom's on my ameo with success . my phone status is: IPL-v1.00 SPL-v1.20. Olipro.
my bad luck i try to update with that rom (Athena_SPL3.5_WM6.1_WWE_R6.1-Michy) after 92% rom got error & phone restart. after that my Ameo hang on startup. i put my phone into usb mode by pressing CAMERA key + POWER & try to upgrade with lot of diffrent roms but i got ERROR[244] INVALID MODEL ID (pic attached below) plz help me how can i update my phone in working condition??>......................
This may help!
Hi Kanwalgee.
The problem is that you tried to flash a ROM for SPL3.5 and you have SPL 1.20.
I read some of that in this thread. Read and it maybe help you to correct the problem.
Then go to the mobile 6 section and read this other thread.
I hope this will useful for you.
Regards.

Help please!

I was trying to update my Athena to wm6. I got errors 270 so i tried to update the spl as i read on the forum. I stupiditly updated the x7510 spl so i think i really screw it up.
Results:
When I try to open it it shows nothing. The joysticks light is just on.
I can enter bootloader. It says:
ATHE400
IPL-v1.00
ATHE400
SPL-3.65.0 Ol iNex
I cant do anythink at this point. Any flash i use it gives me an invalid device id. I also tried the Athena Unlocker but it gives me the same error.
Is there any way to make it live again? Please help me I am desperate.
I did the same thing. And I am also desperate Happy not to feel alone :O But i think no reply for this one... Olinexx help us please...
to: palamosteliaro
this thread started by ggursel seems to have solved that problem. hope that helps
http://forum.xda-developers.com/showthread.php?t=502682

Rom Flash problem

have tried to flash my phone today , with no success
everytime i try either using hard SPL v1 or Touch IT , i get the same error
get the tricolour screen then says no image , i then try and flash and get connection 262 error
anyone any ideas what i am doing wrong ?
thanks in advance
R
Hey, well you're not the only one with this problem... I have it as well and I've spent a few evenings to find a solution, but nothing worked :S I hope someone can help us out...
heres hoping as i really want the Touch IT rom ...
R
Remove the SD card when flashing this way - that will fix the 262 problem.

plz help me my charmer doesnt work

hi ,
i flased the tmobile rom with ur given link now it doesnt go past the initial screen
all it says is
ipl 3.08
spl 3.08
gsm 02.69.21
os 3.8.2.21
and stays ter all day until battery goes dead.
i can get into bootloder mode
please help me let me know hw can i get my phone up and running.
it says format failed
thx fr ur reply but i have tried this it doesnt work.
have this info it might help u :
when i try t format by pressing power+record +camera
it says fail to format.....
so let me know wat to do , any wayz thx for paying intrest to help me out .
You say format failed? Then forget your Device. We have only one case of reported fix for that. But the fix has never worked again. So I think your Device is dead.
so no way of getting it back ??? plz there should be some way yea ???
We don't have any way reported to work more then one time. I'll do some research for you but I think it is hopeless.
same thing here on one charmer ... I can enter bootloader, can flash a rom - t-mobile english versinon WM5. but device hangs while booting and on hardreset format fails.
Is it possible to flash another rom that works? whitch rom?
To reply:
It can be Hardware fail but I don't think so. At this moment we don't have a fix but I have some ideas. To test them I'm at the moment talking to an other person with that problem. Till now we don't have any good news but we are still working. Maybe there is hope soon.

Categories

Resources