im wondering because i dunno what version my spl is?
help is appriciated
Hold power, ok button and reset with stylus. This should get you to bootloader which displays your IPL and SPL...
Related
Hello everybody.
After i flashed the Radio ROM 2.69.11 to my Wizard..
Its broken, freezes on bootup and wont run.
the screen shows the following:
IPL: 0.3
SPL 1.03
OS 1.3.1.13
--------------------
How do i fix this problem?
Thanks
//Daniel ..
IPL 0.3? What did you loaded into it...
The Radio ROM may be too new for your IPL version...
If warranty is not important, Go to the Wizard Upgrade section and read the stickies, use Button's 1.05 ROM to unlock, then upgrade a newer IPL and SPL.
I see i made a mistake..
its ipl 1.3 sorry..
How i installl Buttons. if i cant use ActiveSync?
//daniel
latii said:
I see i made a mistake..
its ipl 1.3 sorry..
How i installl Buttons. if i cant use ActiveSync?
//daniel
Click to expand...
Click to collapse
Put it into bootloader, then flash from there.
Bootloader is.. Power + camera button.. right?
I got red/green/blue/ screen now.. with IPL 1.03 and SPL 1.03..
Connection USB and start the .exe file? (from buttons).
//Daniel
Wizard Works Again!!
Big Thankss To Alll !
Really Appriciate..
//daniel
Hi there.
I am going to buy a very very cheap new Herald.. One bad thing. It's bricked. But bootloader (Tricolor) runs. My question is: How to flash official WWE ROM WM6.
(HTC_P4350_SPA_4.17.412.2_4.1.13.44_02.94.90_Ship.exe)
What IPL / SPL version does it have?
If its lower than 4, you may want to reconsider buying the phone since it may be permanently bricked, requiring being sent back to HTC which will only mean more $$$
TO check the IPL SPL version, you need to go into bootloader mode, which means hold down the camera button and soft reset the phone (sticking the stylus into the reset button the left side of the phone under the volume slider) while keeping the camera button pressed the whole time until you get a tri color screen with the version numbers. If they are less than 4something... you run the risk of permanently bricking the phone
ok..
Bootloader seems to be showing this:
IPL 1.11.0001
SPL 1.11.0001
USB
This is not good, or yes?
Ok, another way...
In attachment is picture of bricked Herald. Is any way to unbrick it - WM5/WM6?
Stock RUU ?
Are you guessing or you know what I have to do?
The problem with having an IPL/SPL thats less than 4x ... is that from my understanding, once its bricked ... there's no way to fix it without sending it to htc..
If you buy any chance have a stock ruu to try to run on it, but i don't know if that would work.
Try one of the htc roms from the herald wiki
HMmm.
To big risc for me. I don't know if that would be unbricked. I am go away from it. Sorry.
any One help me i write spl on Gene after run spl now my Gene show only boot mode
ONBL 1.07.0000
SPL 1.10.0lip
Plss Help mee.....urgent
Dopod d600 bricked during the upgrade.
Need help for a bricked Dopod d600 Gene 100
Only light blink at the bottom, not movement ahead.
Bootloader through cam button and power button.
ONBL 1.07.0000
SPL 1.07.0000
on Bootloader.
Tried everything, nothing works.
cant use the Orefkov Unlocker as the usb drivers for vista doesnt work nor recognises the device.
Help !!!
Bro Download Hard Spl V 1 It works for u
i juss bricked my Mobile and now i have downloaded Hard SPL used it
and IT WORKED hit me PM i will help you two people
Sorry for double Post Connection Problem :|
unlocking tools for gene.after rom update 100%.close windows.but gene {old gene} not power on.
press power key call accept/reject led blink one more time but screen is going black.the gene goes in bootloader tri screen mode IPL 1.02.0000
SPL 1.07 orefkov.
before hspl my old gene information is
Rom version 1.2.707.1 WWE
Rom dt. 11/30/06
Radio 02.71.90
Protocol 4.1.13.31
ONBL 1.02.0000
SPL 1.02.0000
GSM 02.74.90
OS 1.2.00
please help for my gene reback in normal mode.
Thanks
Hello,
its been quite a long time I installed HSPL. Now im about to install mglrd, but im quite unsure which HSPL. Booting with Volume Down it says SPL-1.66.HSPL XE - does that mean that both the SPL and HSPL version are 1.66 or just SPL?
Thanks in advance!
You can see the HSPL version when you hold the volume down button directly after turning on (or soft-resetting) te device. You will get in the tri-color screen which shows some info like (H)SPL version.
Soft reset or pull battery for a normal boot.