Gene Only Show Boot mode - P3400 General

any One help me i write spl on Gene after run spl now my Gene show only boot mode
ONBL 1.07.0000
SPL 1.10.0lip
Plss Help mee.....urgent

Dopod d600 bricked during the upgrade.
Need help for a bricked Dopod d600 Gene 100
Only light blink at the bottom, not movement ahead.
Bootloader through cam button and power button.
ONBL 1.07.0000
SPL 1.07.0000
on Bootloader.
Tried everything, nothing works.
cant use the Orefkov Unlocker as the usb drivers for vista doesnt work nor recognises the device.
Help !!!

Bro Download Hard Spl V 1 It works for u
i juss bricked my Mobile and now i have downloaded Hard SPL used it
and IT WORKED hit me PM i will help you two people

Sorry for double Post Connection Problem :|

Related

What should i do??

Ok here is the "Thing"
i put a hermes ROM on Elf (soft black) and i think the SPL and IPL has changed
its now:
IPL 1.17.0002 ,is it right ?
SPL 1.17.0000, is it right?
and i tried to download the Offical HTC elf Rom but after 2% it restart and write ID Vendor ERROR
what should i do?
P.S:i tried to do SuperCID but it need The ActiveSync Progoram to be ON, im stuck on bootloader Screen
MKR

MDA Touch ELF0300 stuck in bootloader

My problem is, my htc touch elfin? (mda touch elf0300) stuck in bootloader-mode. Is there any Solution to get it working ?.
IPL : 2.26.0002
SPL: 2.26.0000
ELF0300
After 2 % crashed the rom update. I can´t the uspl until again because, the device wont connects to active sync.
Need Help
Thank you
.
i have same problem too, but
IPL 1.16.0002 and SPL 1.16.0000
I also have this problem
IPL 1.16.0002
SPL 1.16.0000
Stuck on bootloader screen none of the usual reset options seem to work and doesn't show up when plugged in to usb port
Help
Thanks Si

P3400 with corrupted IMEI

I have upgraded my P3400 (aka GENE100) and now I have a corrupted IMEI, diferent from the one on the back sticker.
Setting->Device Information->Identity show:
IMEI: 62=2:6;;5:0;31901
Is it possible to recode original IMEI perhaps with MTTY? or any other tool?
try this utility......
yes u can....plz try this attached utility.....i think it will help u....all the best....
Bricked P3400 a.k.a Gene 100 with SPL 1.07.Oref
Thank you Rony for your quick answer.
But now I am stuck on HTC logo white boot screen:
ONBL 1.07.0000
SPL 1.07.Oref
GSM 02.71.90
OS 1.17.0.0
I can bootload with camera button pushed and as I said I believe I have an old Gene because my serial starts with 7XXXX.
Is there any thing I can do?
actually what u did......i gave u this software 2 change only the IMEI.....u unlocked ur gene,it's grate but u have used the wrong file......i.e; ur spl is showing 1.17.oref right......? if ur gene is old then it must be "olip".....just try to change ur spl....
u can also try the software 4 which u can automatically change the SPL.....
plz click here

[Q] after orefkov rom upgrade old Gene show black screen

By mistakely Orefkov hspl and run rom update utility of this folder my old Gene show black screen.when press power key call/reject led blink one more time but screen is going black.the gene goes in bootloader tri screen mode.
IPL 1.02.0000
SPL 1.07 orefkov..
before hspl my old gene information is
Rom version 1.2.707.1 WWE
Rom dt. 11/30/06
Radio 02.71.90
Protocol 4.1.13.31
ONBL 1.02.0000
SPL 1.02.0000
GSM 02.74.90
OS 1.2.00
please help
thanks
saurabh_1999 said:
By mistakely Orefkov hspl and run rom update utility of this folder my old Gene show black screen.when press power key call/reject led blink one more time but screen is going black.the gene goes in bootloader tri screen mode.
IPL 1.02.0000
SPL 1.07 orefkov..
before hspl my old gene information is
Rom version 1.2.707.1 WWE
Rom dt. 11/30/06
Radio 02.71.90
Protocol 4.1.13.31
ONBL 1.02.0000
SPL 1.02.0000
GSM 02.74.90
OS 1.2.00
please help
thanks
Click to expand...
Click to collapse
hi
1. if u have done the wrong HSPL for ur phone then i think u need to take it to service or do that jtag(i dont know how to do this )
2. u can try this if u can get into ur try color
connect the USB cable if u get the USB symbol on the phone then try flashing the right ROM for ur phone
ask this question in the gene Question and answers thread in the development section im sure some one will help u
Thanks
hari

[q] stuck in bootloader. Help needed.

have a HTC Athena x7500.
Im stuck in bootloader.
Wend I power on the device it goes directly to bootloader and
the screen say :
ET \ Njq
IPL - v1.00
ET \ Njq
SPL- v1.20. Olipro
USB( wend is connect )
serial ( wend is unconnect )
I dont remember what it was befor I try to flash a WM 6.5 rom on it.
It as a WM 6.1 in Portuguese Rom befor my attent.
I cannot power off the device by pressing the button but have to take
the battery.
I already try to change the rom, the SPl and put everything inside just
to try to move from were I am but no results.
Began to update but ends or in 1% or in 7% and loose the connection.
The device connects to the PC but in PC in WM device center nothing happens.
I try Win7 and also XP.
I went to HTC site to download the official portuguese ROM but there are no
ROM to download.
So I´m dead on the water.
I will apreciate very much any kind of input that take me out
of were I´m now.
I´m not a expert as you already notice.Please keep it simple.
Thank you
stuck in bootloader. Help needed.
stuck in bootloader. Help needed.
have a HTC Athena x7500.
Wend I turn on the device, it goes directly to bootloader and
the screen is:
ATHE 100
IPL - v1.00
ATHE 100
SPL-v3.05.0000 OR my old spl spstuck in bootloader. Help needed.l is 1.10
I have tried to change the language of my athena and then he died :spanish > fransh
USB (wend is to connect)
series (wend is unconnectable).
I can not turn the unit off by pressing the button, but must take
the battery.
I have tried with hardspl its not working
I want a solution in the forum xda-develop it says my q must upgrade to the rom of espana oficial
After downloading the rom:Advantage_HTC_SPA_2.21.412.1_1.50.00.00_Ship
I tried to upgrade to this rom May j has a mesage on my athena screen:
found spl v1.10
dowload Spl before v3.05 is not allowed!
I tried to update it with the sd card i have the same mesage
upgrade with athenaUnlucker not work
upgrade with hardspl v7 not work
upgrade with CheetahUnlocker not work
upgrade with athena wraper not work
J have explored ruu_signeg.nbh with notepad jai entered the signer spl 1.10 I know if c is vrait or name
I believe there is a problem in the image rom saved in my athena rom
what I see on the screen of my athena is the spl 3.05.0000
The real spl is 1.10.0000 there is confusion in my spl
is what I can fix this problem with mtty
so if possible please guide me
sorry for my bad Englis
thank you in advance
My email: [email protected]

Categories

Resources