What should i do?? - Windows Mobile Development and Hacking General

Ok here is the "Thing"
i put a hermes ROM on Elf (soft black) and i think the SPL and IPL has changed
its now:
IPL 1.17.0002 ,is it right ?
SPL 1.17.0000, is it right?
and i tried to download the Offical HTC elf Rom but after 2% it restart and write ID Vendor ERROR
what should i do?
P.S:i tried to do SuperCID but it need The ActiveSync Progoram to be ON, im stuck on bootloader Screen
MKR

Related

HTC4350 stopped at Green screen after upgrading to WM6..plz help

I have HTC 4350 (Sim Locked) and i run WM6 utility with CID unlock (ASerg19). After the upgrade is completed 100% , the device is freezed on a green screen and stopped. if i enter bootloader mode (Trying to recover to Original ROM WM5) it gives me 4 Colors Screen with IPL 1.08.0001 , SPL 1.08.0001 . And the upgrade process halt on 0% and the ROM Utility from PC exits with an error [300]
Plz need your advise urgently
Thanks
Maged111 said:
I have HTC 4350 (Sim Locked) and i run WM6 utility with CID unlock (ASerg19). After the upgrade is completed 100% , the device is freezed on a green screen and stopped. if i enter bootloader mode (Trying to recover to Original ROM WM5) it gives me 4 Colors Screen with IPL 1.08.0001 , SPL 1.08.0001 . And the upgrade process halt on 0% and the ROM Utility from PC exits with an error [300]
Plz need your advise urgently
Thanks
Click to expand...
Click to collapse
Find an ruu suit your cid
http://forum.xda-developers.com/showthread.php?t=342273
I have HTC 4350 and i run WM6 utility with CID unlock (ASerg19).I closed flasher and only console program worked with my ppc, the device is freezed on a white screen and stopped. if i enter bootloader mode (Trying to recover to Original ROM WM5) it gives me 4 Colors Screen with IPL 1.08.0001 , SPL 1.08.0001 . And the upgrade process halt on 0% and the ROM Utility from PC exits with an error [300]
i have only sunday to recover. Plz help!
P.S. I tryed all ROMs what i downloaded
I have russian CID (HTC__A07) and ROMUpdate doesn`t want to flash
how do u know what cid you have if its stuck in boot loader?
its an htc model i downloaded the rom fromhtc but it reboots after 2% and shows error ( invalid model id ) error 244 thats really odd i dont get it.
any help would be great.
thanks

MDA Touch ELF0300 stuck in bootloader

My problem is, my htc touch elfin? (mda touch elf0300) stuck in bootloader-mode. Is there any Solution to get it working ?.
IPL : 2.26.0002
SPL: 2.26.0000
ELF0300
After 2 % crashed the rom update. I can´t the uspl until again because, the device wont connects to active sync.
Need Help
Thank you
.
i have same problem too, but
IPL 1.16.0002 and SPL 1.16.0000
I also have this problem
IPL 1.16.0002
SPL 1.16.0000
Stuck on bootloader screen none of the usual reset options seem to work and doesn't show up when plugged in to usb port
Help
Thanks Si

P3300

Hello, I have Arte100 and all I can do is to enter in boot mode... I try to update rom, but always get "error 226".
ipl 1.12.0001
spl 1.12.000
Any help maybe?
Thx
I have similar problem, here I need official rom 1.12.404.1 NLD.in case you find something, help and me please
ok man...
If you phone its htc p3300 nld,try this:http://www.filestube.com/7ecfb875ce01017303ea/details.html
3.13.404.1
SPL locked, so you get the error!
Unlock USPL first then afterthat flash!
SPL shall become 1.11 instead of your 1.12..
follow these steps:
1) USPL your device click here
2) Flash any new rom you like click here for original shipped roms or search this forum for any other rom you like....

HTC ELF night mare of smart mobility

Hi All,
I need your help in urgent!!!
My ELF GSM infor:
- DeviceID: ELF011000
- CID : DOPOD701
My ELF worked fine before I tried to upgrade its IPL from 1.11.0002 to 2.26.0002, then this problem occur. Because a WM 6.1 ROM requires to have IPL 2.27.0002 and SPL 2.28.0000 so I kept continue upgrade the IPL/SPL to 2.27.0002 and 2.28.0000.
I tried to flash my ELF, from bootloader mode, with these ROMs:
- RUU_Elf_DOPOD_chs_1.11.706.1B, this ROM I got from a China forum, it is my device original ROM
- RUU_Elf_DOPODASIA_WWE_1.11.707.1B_4.1.13.42_02.93.90_Ship.exe
- RUU_Elf_DOPODASIA_WWE_1.17.707.2B_4.1.13.46_02.97.90_BLUE_Ship.exe
- RUU_Elf_HTC_Asia_HK_WWE_1.15.721.3B_4.1.13.46_02.97.90_BLUE_Ship.exe
- ESSential_4_5
- Onyx_jr_4_4_2_Light
They are all 100% successfull but the IPL/SPL unchanged (2.27.0002 and 2.28.0000) and the device still loop at smart mobility, can not jump into OS.
I did try to use unbricker ROM and goldcard (with original ROM or unbricker ROM inside) but the ELF still stuck at smart mobility...
Please give me your advices, what should I do (except buying a new phone)?
Thanks for your time!
Flash your Official ROM
rockerboom said:
Hi All,
I need your help in urgent!!!
My ELF GSM infor:
- DeviceID: ELF011000
- CID : DOPOD701
My ELF worked fine before I tried to upgrade its IPL from 1.11.0002 to 2.26.0002, then this problem occur. Because a WM 6.1 ROM requires to have IPL 2.27.0002 and SPL 2.28.0000 so I kept continue upgrade the IPL/SPL to 2.27.0002 and 2.28.0000.
I tried to flash my ELF, from bootloader mode, with these ROMs:
- RUU_Elf_DOPOD_chs_1.11.706.1B, this ROM I got from a China forum, it is my device original ROM
- RUU_Elf_DOPODASIA_WWE_1.11.707.1B_4.1.13.42_02.93.90_Ship.exe
- RUU_Elf_DOPODASIA_WWE_1.17.707.2B_4.1.13.46_02.97.90_BLUE_Ship.exe
- RUU_Elf_HTC_Asia_HK_WWE_1.15.721.3B_4.1.13.46_02.97.90_BLUE_Ship.exe
- ESSential_4_5
- Onyx_jr_4_4_2_Light
They are all 100% successfull but the IPL/SPL unchanged (2.27.0002 and 2.28.0000) and the device still loop at smart mobility, can not jump into OS.
I did try to use unbricker ROM and goldcard (with original ROM or unbricker ROM inside) but the ELF still stuck at smart mobility...
Please give me your advices, what should I do (except buying a new phone)?
Thanks for your time!
Click to expand...
Click to collapse
First try to flash your official ROM and then try to flash ipl/spl again follow step by step. After that try to flash customize ROM again. Hope you will success.
Dear ELF341,
Thanks for your advice!
When I flash the original ROM, 100% successful, then my ELF loop at the China Mobile screen then reset... I don't have the IPL1.11.0002 and SPL 1.11.0000, the lowest I have is IPL1.17.0002 and SPL1.17.0000. I tried to flash back the 1.17 version, after 100% successful, enter bootloader, the IPL 2.27.0002 and SPL 2.28.0000 still remain!?
Please tell me how to do!
Thanks for your time!
rockerboom said:
Dear ELF341,
Thanks for your advice!
When I flash the original ROM, 100% successful, then my ELF loop at the China Mobile screen then reset... I don't have the IPL1.11.0002 and SPL 1.11.0000, the lowest I have is IPL1.17.0002 and SPL1.17.0000. I tried to flash back the 1.17 version, after 100% successful, enter bootloader, the IPL 2.27.0002 and SPL 2.28.0000 still remain!?
Please tell me how to do!
Thanks for your time!
Click to expand...
Click to collapse
After flash back to official ROM , enter bootloader and check ipl/spl first.
Normally, if you flash ipl/spl (not hard spl) when you flash back to the official ROM the ipl/spl will back to original. S/R - wait for boot to WM if OK then do H/R again. And flash ipl/spl again - enter bootloader and check ipl/spl again (changed or not) if OK after that I recommended you flash Onyx ROM. I used it for long time and no trouble.
Hope, it's can help you.
Dear ELF341,
Thanks for your reply!
After 100% successful loading the original ROM, my ELF restart and loop at the China Mobile screen... When I enter bootloader, the IPL/SPL still remain as IPL 2.27.0002 SPL 2.28.0000
I understand that when we flash the original ROM, the IPL/SPL will roll back to its original version, but mine is so strange?! Does this mean that:
- My ELF's flash ROM is fail or locked at the region for IPL/SPL so that whatever ROM I flash (these ROM contain ILP,SPL,OS,radio..) the IPL/SPL unchaged?
- The original ROM is actually not match to my ELF?? But I already flashed the other ship WWE ROM and also the unbricker ROM, they all loop at smart mobility...
Please help me!
rockerboom said:
Dear ELF341,
Thanks for your reply!
After 100% successful loading the original ROM, my ELF restart and loop at the China Mobile screen... When I enter bootloader, the IPL/SPL still remain as IPL 2.27.0002 SPL 2.28.0000
I understand that when we flash the original ROM, the IPL/SPL will roll back to its original version, but mine is so strange?! Does this mean that:
- My ELF's flash ROM is fail or locked at the region for IPL/SPL so that whatever ROM I flash (these ROM contain ILP,SPL,OS,radio..) the IPL/SPL unchaged?
- The original ROM is actually not match to my ELF?? But I already flashed the other ship WWE ROM and also the unbricker ROM, they all loop at smart mobility...
Please help me!
Click to expand...
Click to collapse
How you flashed ROM ? By RUU (PC) or used microSD card. I recommened you to use RUU (PC) follow step by step. Sometime when I used microSD card to flashed ROM , it's successful but cannot boot, after that I flashed Official ROM by RUU and unlocked the phone again it's back to normal. And your official ROM, you must check with your operator or distributor because in different zone it's use diferent ROM.
Dear ELF341,
I only can flash via PC RUU, I don't succeed in SD card way:
- When I copy the *.nbh file into SD card, then enter bootloader, I just can see the checking SD card content string displayed very fast, then the tri color screen.
- When I create a goldcard and copy *nbh file into it, enter bootloader, the brick ask for 'upgrading SD image', I press power button for it to start download but it hang at 'downloading from SD' with a blank download status bar.
Actually I bought this ELF from a man on my local site, so I don't know where is the distributor...I used the mtty and usb monitor to check for my device infor, then search internet for my original ROM, I only can find in a China forum that match my deviceID/CID....
For my case, I really don't know why I can not change its IPL/SPL version? Please help me!!!
Thanks for your time!
well u hav to rename the nbh file to ELF0IMG for SD card flashing to work.

[q] stuck in bootloader. Help needed.

have a HTC Athena x7500.
Im stuck in bootloader.
Wend I power on the device it goes directly to bootloader and
the screen say :
ET \ Njq
IPL - v1.00
ET \ Njq
SPL- v1.20. Olipro
USB( wend is connect )
serial ( wend is unconnect )
I dont remember what it was befor I try to flash a WM 6.5 rom on it.
It as a WM 6.1 in Portuguese Rom befor my attent.
I cannot power off the device by pressing the button but have to take
the battery.
I already try to change the rom, the SPl and put everything inside just
to try to move from were I am but no results.
Began to update but ends or in 1% or in 7% and loose the connection.
The device connects to the PC but in PC in WM device center nothing happens.
I try Win7 and also XP.
I went to HTC site to download the official portuguese ROM but there are no
ROM to download.
So I´m dead on the water.
I will apreciate very much any kind of input that take me out
of were I´m now.
I´m not a expert as you already notice.Please keep it simple.
Thank you
stuck in bootloader. Help needed.
stuck in bootloader. Help needed.
have a HTC Athena x7500.
Wend I turn on the device, it goes directly to bootloader and
the screen is:
ATHE 100
IPL - v1.00
ATHE 100
SPL-v3.05.0000 OR my old spl spstuck in bootloader. Help needed.l is 1.10
I have tried to change the language of my athena and then he died :spanish > fransh
USB (wend is to connect)
series (wend is unconnectable).
I can not turn the unit off by pressing the button, but must take
the battery.
I have tried with hardspl its not working
I want a solution in the forum xda-develop it says my q must upgrade to the rom of espana oficial
After downloading the rom:Advantage_HTC_SPA_2.21.412.1_1.50.00.00_Ship
I tried to upgrade to this rom May j has a mesage on my athena screen:
found spl v1.10
dowload Spl before v3.05 is not allowed!
I tried to update it with the sd card i have the same mesage
upgrade with athenaUnlucker not work
upgrade with hardspl v7 not work
upgrade with CheetahUnlocker not work
upgrade with athena wraper not work
J have explored ruu_signeg.nbh with notepad jai entered the signer spl 1.10 I know if c is vrait or name
I believe there is a problem in the image rom saved in my athena rom
what I see on the screen of my athena is the spl 3.05.0000
The real spl is 1.10.0000 there is confusion in my spl
is what I can fix this problem with mtty
so if possible please guide me
sorry for my bad Englis
thank you in advance
My email: [email protected]

Categories

Resources