P3300 - P3300, MDA Compact III upgrading etc.

Hello, I have Arte100 and all I can do is to enter in boot mode... I try to update rom, but always get "error 226".
ipl 1.12.0001
spl 1.12.000
Any help maybe?
Thx

I have similar problem, here I need official rom 1.12.404.1 NLD.in case you find something, help and me please

ok man...

If you phone its htc p3300 nld,try this:http://www.filestube.com/7ecfb875ce01017303ea/details.html

3.13.404.1

SPL locked, so you get the error!
Unlock USPL first then afterthat flash!
SPL shall become 1.11 instead of your 1.12..
follow these steps:
1) USPL your device click here
2) Flash any new rom you like click here for original shipped roms or search this forum for any other rom you like....

Related

P4350 " invalid vendor"

i have a problem with one HTC p4350 hera100 his rom is in espaniol and i want to change rom in english with HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe and say "invalid vendor id" i read on this forum and i follow steps of "hdubli" when press " e" everything goes ok but i have one problem when i press "w" for write rom the software don't show me any roms,(i have extract the nbf file and i put os.nb rename to os.nba ) when i p[ress any number it goes out! do u know what problem is! thx!
Do the HARDSPL and you will be able to flash any rom you want.
HARD-SPL
my ipl is 1.xxx what can i do!!! are u shure it work?!?
Read the post and see if it will work for you.
i try with HERALD-USPL-beta3 and now is dead!!! no boot no anything!!! what can i do!!! pls help me
!!
frunzygsm said:
i try with HERALD-USPL-beta3 and now is dead!!! no boot no anything!!! what can i do!!! pls help me
!!
Click to expand...
Click to collapse
try and ask ivanmmj - he is used in falshing with uspl.
soryy
USPL, just like HardSPL requires your SPL to be 4.0.0.0 or higher. You had to run the stock RUU to update to WM6 FIRST to update your SPL. Now, unfortunately, unless you're really lucky, you'll have to bring it in to a repair center. I'm sorry. But first, try to run the stock RUU and see what happens.
Oh no. USPL and HARDSPL are 2 different things! thats why I posted the link to the HardSPL in that post.
Now you need to install your stock RUU to unbrick your device.
duprade said:
Oh no. USPL and HARDSPL are 2 different things! thats why I posted the link to the HardSPL in that post.
Now you need to install your stock RUU to unbrick your device.
Click to expand...
Click to collapse
Well, the only thing I'm worried about is the partition tables being slightly different in the different SPLs and therefore, trying to write them with an SPL of 4.x when the device is formatted to an SPL of 1.x, it might cause a problem. Two different issues, but still issues none-the-less. But that's just a guess.
If you can place the phone into bootloader mode and flash the RUU, then you're right. Hold your camera button while softresetting to get into the booloader menu.
sorry but i cannot understand in that phrase the sintax of "stock ruu" can u help me! meens all ruu that's i have??!?
hy! i read all posts about htc p4350 and i decide to use the HERALD-USPL-beta3 and now phone is dead only bootloader, i try with original flash from spain from support and says" invalid update tool"! here is the story:
i have one htc p4350 with ipl 1.08.0001 and SPL 1.08.0001 from spain and i want to change language to english, i donwload de rom WWE from forum and says "invalid vendor" and i decide to write de nbh file with this program and now phone is how that i say to you up! So u know a metod to write any rom in that situation?? if u know pls help me! thx! so if somebody know a good solution pls share it!
can anybody help me pls!! how can i jump spl into ram or how can i flash a new rom now from bootloader mode!!!
Maybe Try different RUU's to see if one of them works.
What is your phone company? Maybe they have the RUU on their website if you try logging into your account.
my htc is from spain do u know what operator sell this this htc!
I'm sorry. As I said, you'll have to bring it in to the repair center. USPL jumps a hacked SPL into memory. The problem is that you had a pre-4 SPL and that they're not compatible.
thx ivanmmj! i understand but u know how people are...we must hope! for now i see that is no solution but in future u can get one? now i have to pay de phone to customer (!!

polaris boot only in bootloader

hi all,
i'm french,sorry for my little english
i have flashed my polaris but i have not run hard spl
now he boot only in bootloader mode and flash spl is not possible
what can i do?
i have : POLA 100 SPL 1.25.0000 CPLD-2
THANKS A LOT FOR YOUR HELP!
rwik5060 said:
hi all,
i'm french,sorry for my little english
i have flashed my polaris but i have not run hard spl
now he boot only in bootloader mode and flash spl is not possible
what can i do?
i have : POLA 100 SPL 1.25.0000 CPLD-2
THANKS A LOT FOR YOUR HELP!
Click to expand...
Click to collapse
Lots of threads on exactly this, check the polaris wiki
http://forum.xda-developers.com/showthread.php?t=425922&highlight=mtty
Also don't miss the part where he says try to flash the original ROM first, or try SD method too
Rwik,
Flash the original / shipped rom back.
Hardspl
reinstall custom rom.
big thanks at all, that works with mtty
thanks thanks thanks!!!!!!!!!!!

Please Help me !!! m Desperate !!!!

Hello to all. My name is Kushal.
I own a Cingular 8125.
ROM Version :: 1.8.11.1 WWE
ROM Date :: 11/24/2005
Radio Version :: 01.16.11
Protocol Version :: 4.0.13.21
IPL 1.xx
SPL 1.xx
I want to upgrade my ROM ... I even tried to flash it but it was giving me an error with error number 266, something like that ... I even tried lokiwiz.bat and EnableRapi.cab and then again tried to flash the ROM but again failed ...
Anyone please tell me step by step what should be done in order to successfully flash the ROM and upgrade it to WM6.
I was using Kaiser ROM for upgradation ...
M waiting for your reply !!!
Thankyou.
Can anyone suggest me to use which ROM for upgrading ...
also when i am trying to upgrade the ROM with KAISER ROM
on my PDA it is showing
-----------------------
IPL 3.08 RUU
SPL 3.08
USB
------------------------
and on my PC -->> an error [266] occured...
thats it ...
ok,First,is your phone in working condition,does it load up OS or its stuck on Bootloaders (Multi Color Screen) ? Did you perform CID unlock before upgrading to wm6 ? coz without CID unlock,it won't upgrade at all.
If its working,then download WST_4.2.2 tool and verify the CID Lock/unlock status of the phone,if its still CID unlock,then get it unlocked either through 'lokiwiz 02b' or WST_4.2.2,only then flash any wm6 rom.
Secondly,if its not working and gets into Bootloaders,then download the official cingular rom and flash it in Bootloaders to recover back to its default working status and then proceed further as described above.
Read and follow this guide carefully to fully understand the CID unlocking and upgrading method :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Buddy, my PDA is very well in working condition, and it loads the OS and doesnt stop at bootloaders ... i am able to make calls and do what ever ...
Next, my CID is unlocked ...
And now i cant figure out how to flash a ROM ...
may be i am confused or i am not able to understand the steps involved in doing so ... And can you please suggest me a gud ROM image to upgrade ...
Thank you.

stuck on bootloader screen

Hi,
I have tried to flash a wiza200 that was already flashed with a manila rom, I checked that it is a G4. I used TNT.20273 Professional Wizard HTC Home FREE ROM, it seems to work , romupdate utility indicated that the device was flashed successfully but it reboots on bootloader screen. I tried to reflash it it gave the same result, I tried another rom but impossible to flash it with other roms. So I downloaded the official one from the operator O2 but I got "invalid vendor" message. I searched all the possible solutions but none of them worked( wizard love also). Is there a savior here ? someone who can give me the right procedure to follow.
initially the IPL was 2.21.0001 and spl 2.21 Olipr
now the IPL is 2.21.0001 and spl 2.21
Thanks
Best regards.
You must replace the Update.exe with a MaUpgradeUT_NoID.exe . Found here in Forum . Look in "Blue Angel" for it. Be sure that you flash the right ROM with it . It will no ask...

HTC ELF night mare of smart mobility

Hi All,
I need your help in urgent!!!
My ELF GSM infor:
- DeviceID: ELF011000
- CID : DOPOD701
My ELF worked fine before I tried to upgrade its IPL from 1.11.0002 to 2.26.0002, then this problem occur. Because a WM 6.1 ROM requires to have IPL 2.27.0002 and SPL 2.28.0000 so I kept continue upgrade the IPL/SPL to 2.27.0002 and 2.28.0000.
I tried to flash my ELF, from bootloader mode, with these ROMs:
- RUU_Elf_DOPOD_chs_1.11.706.1B, this ROM I got from a China forum, it is my device original ROM
- RUU_Elf_DOPODASIA_WWE_1.11.707.1B_4.1.13.42_02.93.90_Ship.exe
- RUU_Elf_DOPODASIA_WWE_1.17.707.2B_4.1.13.46_02.97.90_BLUE_Ship.exe
- RUU_Elf_HTC_Asia_HK_WWE_1.15.721.3B_4.1.13.46_02.97.90_BLUE_Ship.exe
- ESSential_4_5
- Onyx_jr_4_4_2_Light
They are all 100% successfull but the IPL/SPL unchanged (2.27.0002 and 2.28.0000) and the device still loop at smart mobility, can not jump into OS.
I did try to use unbricker ROM and goldcard (with original ROM or unbricker ROM inside) but the ELF still stuck at smart mobility...
Please give me your advices, what should I do (except buying a new phone)?
Thanks for your time!
Flash your Official ROM
rockerboom said:
Hi All,
I need your help in urgent!!!
My ELF GSM infor:
- DeviceID: ELF011000
- CID : DOPOD701
My ELF worked fine before I tried to upgrade its IPL from 1.11.0002 to 2.26.0002, then this problem occur. Because a WM 6.1 ROM requires to have IPL 2.27.0002 and SPL 2.28.0000 so I kept continue upgrade the IPL/SPL to 2.27.0002 and 2.28.0000.
I tried to flash my ELF, from bootloader mode, with these ROMs:
- RUU_Elf_DOPOD_chs_1.11.706.1B, this ROM I got from a China forum, it is my device original ROM
- RUU_Elf_DOPODASIA_WWE_1.11.707.1B_4.1.13.42_02.93.90_Ship.exe
- RUU_Elf_DOPODASIA_WWE_1.17.707.2B_4.1.13.46_02.97.90_BLUE_Ship.exe
- RUU_Elf_HTC_Asia_HK_WWE_1.15.721.3B_4.1.13.46_02.97.90_BLUE_Ship.exe
- ESSential_4_5
- Onyx_jr_4_4_2_Light
They are all 100% successfull but the IPL/SPL unchanged (2.27.0002 and 2.28.0000) and the device still loop at smart mobility, can not jump into OS.
I did try to use unbricker ROM and goldcard (with original ROM or unbricker ROM inside) but the ELF still stuck at smart mobility...
Please give me your advices, what should I do (except buying a new phone)?
Thanks for your time!
Click to expand...
Click to collapse
First try to flash your official ROM and then try to flash ipl/spl again follow step by step. After that try to flash customize ROM again. Hope you will success.
Dear ELF341,
Thanks for your advice!
When I flash the original ROM, 100% successful, then my ELF loop at the China Mobile screen then reset... I don't have the IPL1.11.0002 and SPL 1.11.0000, the lowest I have is IPL1.17.0002 and SPL1.17.0000. I tried to flash back the 1.17 version, after 100% successful, enter bootloader, the IPL 2.27.0002 and SPL 2.28.0000 still remain!?
Please tell me how to do!
Thanks for your time!
rockerboom said:
Dear ELF341,
Thanks for your advice!
When I flash the original ROM, 100% successful, then my ELF loop at the China Mobile screen then reset... I don't have the IPL1.11.0002 and SPL 1.11.0000, the lowest I have is IPL1.17.0002 and SPL1.17.0000. I tried to flash back the 1.17 version, after 100% successful, enter bootloader, the IPL 2.27.0002 and SPL 2.28.0000 still remain!?
Please tell me how to do!
Thanks for your time!
Click to expand...
Click to collapse
After flash back to official ROM , enter bootloader and check ipl/spl first.
Normally, if you flash ipl/spl (not hard spl) when you flash back to the official ROM the ipl/spl will back to original. S/R - wait for boot to WM if OK then do H/R again. And flash ipl/spl again - enter bootloader and check ipl/spl again (changed or not) if OK after that I recommended you flash Onyx ROM. I used it for long time and no trouble.
Hope, it's can help you.
Dear ELF341,
Thanks for your reply!
After 100% successful loading the original ROM, my ELF restart and loop at the China Mobile screen... When I enter bootloader, the IPL/SPL still remain as IPL 2.27.0002 SPL 2.28.0000
I understand that when we flash the original ROM, the IPL/SPL will roll back to its original version, but mine is so strange?! Does this mean that:
- My ELF's flash ROM is fail or locked at the region for IPL/SPL so that whatever ROM I flash (these ROM contain ILP,SPL,OS,radio..) the IPL/SPL unchaged?
- The original ROM is actually not match to my ELF?? But I already flashed the other ship WWE ROM and also the unbricker ROM, they all loop at smart mobility...
Please help me!
rockerboom said:
Dear ELF341,
Thanks for your reply!
After 100% successful loading the original ROM, my ELF restart and loop at the China Mobile screen... When I enter bootloader, the IPL/SPL still remain as IPL 2.27.0002 SPL 2.28.0000
I understand that when we flash the original ROM, the IPL/SPL will roll back to its original version, but mine is so strange?! Does this mean that:
- My ELF's flash ROM is fail or locked at the region for IPL/SPL so that whatever ROM I flash (these ROM contain ILP,SPL,OS,radio..) the IPL/SPL unchaged?
- The original ROM is actually not match to my ELF?? But I already flashed the other ship WWE ROM and also the unbricker ROM, they all loop at smart mobility...
Please help me!
Click to expand...
Click to collapse
How you flashed ROM ? By RUU (PC) or used microSD card. I recommened you to use RUU (PC) follow step by step. Sometime when I used microSD card to flashed ROM , it's successful but cannot boot, after that I flashed Official ROM by RUU and unlocked the phone again it's back to normal. And your official ROM, you must check with your operator or distributor because in different zone it's use diferent ROM.
Dear ELF341,
I only can flash via PC RUU, I don't succeed in SD card way:
- When I copy the *.nbh file into SD card, then enter bootloader, I just can see the checking SD card content string displayed very fast, then the tri color screen.
- When I create a goldcard and copy *nbh file into it, enter bootloader, the brick ask for 'upgrading SD image', I press power button for it to start download but it hang at 'downloading from SD' with a blank download status bar.
Actually I bought this ELF from a man on my local site, so I don't know where is the distributor...I used the mtty and usb monitor to check for my device infor, then search internet for my original ROM, I only can find in a China forum that match my deviceID/CID....
For my case, I really don't know why I can not change its IPL/SPL version? Please help me!!!
Thanks for your time!
well u hav to rename the nbh file to ELF0IMG for SD card flashing to work.

Categories

Resources