Ok here is the "Thing"
i put a hermes ROM on Elf (soft black) and i think the SPL and IPL has changed
its now:
IPL 1.17.0002 ,is it right ?
SPL 1.17.0000, is it right?
and i tried to download the Offical HTC elf Rom but after 2% it restart and write ID Vendor ERROR
what should i do?
P.S:i tried to do SuperCID but it need The ActiveSync Progoram to be ON, im stuck on bootloader Screen
MKR
My problem is, my htc touch elfin? (mda touch elf0300) stuck in bootloader-mode. Is there any Solution to get it working ?.
IPL : 2.26.0002
SPL: 2.26.0000
ELF0300
After 2 % crashed the rom update. I can´t the uspl until again because, the device wont connects to active sync.
Need Help
Thank you
.
i have same problem too, but
IPL 1.16.0002 and SPL 1.16.0000
I also have this problem
IPL 1.16.0002
SPL 1.16.0000
Stuck on bootloader screen none of the usual reset options seem to work and doesn't show up when plugged in to usb port
Help
Thanks Si
i HSPL my HTC Pharos and after HSPL successfully done my htc stuck at bootloader, so i update it with ROM but still on bootloader screen, so i update it again with official rom so still same plz help me how can i solve this problem
thanx in advance
can anyone help me plz
i am in trouble
any body here
plz help me
plz anyone can help me or not?
hey iwant to help..
but i am not understanding whats u saying..??
thanx for your reply
i have change language from norwigian to english but now my htc stck at bootloader screen (tri color), now i can't update any rom, please help me
shahzaadbutt said:
thanx for your reply
i have change language from norwigian to english but now my htc stck at bootloader screen (tri color), now i can't update any rom, please help me
Click to expand...
Click to collapse
When you plug your pharos to usb and run the ruu aplication is the official rom
loading or not?
When you switch your unit off and then press and hold camera button and press
power button do you get something on your screen or not? At this point you should have connection with your PC and update should start, when you run
ruu update.
when i run the update ruu application its start but after 2% its give me error
ERROR 270 UPDATE ERROR
i can't update it now, and its stuck on bootloader screen (tri color), on screen show this
ONBL 1.11.0000
SPL 1.11.0001
one question: ARE YOU SURE U USED A ROM OF THE PHAROS ROM DEVELOPMENT FORUM?
shahzaadbutt said:
when i run the update ruu application its start but after 2% its give me error
ERROR 270 UPDATE ERROR
i can't update it now, and its stuck on bootloader screen (tri color), on screen show this
ONBL 1.11.0000
SPL 1.11.0001
Click to expand...
Click to collapse
I think that you have to try official pharos rom.
When you press and hold both buttons directly under the screen
and then power button, you will get reset to factory setting option.
Here is a link how to restore your pharos:
http://forum.xda-developers.com/showthread.php?t=458965
There is missing nbhextract in first lot of downloads, but when you scroll
down the page, you'll find it there.
Here is a link to official English pharos rom:
http://forum.xda-developers.com/showthread.php?t=394721
ojejoe said:
I think that you have to try official pharos rom.
When you press and hold both buttons directly under the screen
and then power button, you will get reset to factory setting option.
Here is a link how to restore your pharos:
http://forum.xda-developers.com/showthread.php?t=458965
There is missing nbhextract in first lot of downloads, but when you scroll
down the page, you'll find it there.
Here is a link to official English pharos rom:
http://forum.xda-developers.com/showthread.php?t=394721
Click to expand...
Click to collapse
i have already try this rom but after 2% give me error
shahzaadbutt said:
when i run the update ruu application its start but after 2% its give me error
ERROR 270 UPDATE ERROR
i can't update it now, and its stuck on bootloader screen (tri color), on screen show this
ONBL 1.11.0000
SPL 1.11.0001
Click to expand...
Click to collapse
Hello Brother,
Did u flashed hardSPL first or the rom directly????As the SPL is in your phone is not patched "Hard SPL".........Hard SPL sould look like "SPL 1.11.00MOBIZ"....So thats the problem!
Hard SPL was not flashed successfully!SO that was the problem!
BR
i have a dopod m700 aka htc love
before the upgrade I completely forgot to run the uspl program (i upgraded it with Vanilla WM6 ROM v1.3 Final WWE)
so, my pda stuck at bootloader screen
the screen shown 3 color mode with:
IPL 1.28.0001
SPL 1.28.0000
I try to run the program uspl, but my pda does no longer connect to ActiveSync
i try to upgrade again with the same rom but it stop at 3%, "image error"
i try to upgrade with another rom, still the same. "image error", invalid vender id", "invalid device id", "flash write error happened", etc
so.. what should i do now
????
there's still no answer for this problems
...
flash back to your original/official rom..
then do uspl
have a HTC Athena x7500.
Im stuck in bootloader.
Wend I power on the device it goes directly to bootloader and
the screen say :
ET \ Njq
IPL - v1.00
ET \ Njq
SPL- v1.20. Olipro
USB( wend is connect )
serial ( wend is unconnect )
I dont remember what it was befor I try to flash a WM 6.5 rom on it.
It as a WM 6.1 in Portuguese Rom befor my attent.
I cannot power off the device by pressing the button but have to take
the battery.
I already try to change the rom, the SPl and put everything inside just
to try to move from were I am but no results.
Began to update but ends or in 1% or in 7% and loose the connection.
The device connects to the PC but in PC in WM device center nothing happens.
I try Win7 and also XP.
I went to HTC site to download the official portuguese ROM but there are no
ROM to download.
So I´m dead on the water.
I will apreciate very much any kind of input that take me out
of were I´m now.
I´m not a expert as you already notice.Please keep it simple.
Thank you
stuck in bootloader. Help needed.
stuck in bootloader. Help needed.
have a HTC Athena x7500.
Wend I turn on the device, it goes directly to bootloader and
the screen is:
ATHE 100
IPL - v1.00
ATHE 100
SPL-v3.05.0000 OR my old spl spstuck in bootloader. Help needed.l is 1.10
I have tried to change the language of my athena and then he died :spanish > fransh
USB (wend is to connect)
series (wend is unconnectable).
I can not turn the unit off by pressing the button, but must take
the battery.
I have tried with hardspl its not working
I want a solution in the forum xda-develop it says my q must upgrade to the rom of espana oficial
After downloading the rom:Advantage_HTC_SPA_2.21.412.1_1.50.00.00_Ship
I tried to upgrade to this rom May j has a mesage on my athena screen:
found spl v1.10
dowload Spl before v3.05 is not allowed!
I tried to update it with the sd card i have the same mesage
upgrade with athenaUnlucker not work
upgrade with hardspl v7 not work
upgrade with CheetahUnlocker not work
upgrade with athena wraper not work
J have explored ruu_signeg.nbh with notepad jai entered the signer spl 1.10 I know if c is vrait or name
I believe there is a problem in the image rom saved in my athena rom
what I see on the screen of my athena is the spl 3.05.0000
The real spl is 1.10.0000 there is confusion in my spl
is what I can fix this problem with mtty
so if possible please guide me
sorry for my bad Englis
thank you in advance
My email: [email protected]