Database Users

HTC4350 stopped at Green screen after upgrading to WM6..plz help

I have HTC 4350 (Sim Locked) and i run WM6 utility with CID unlock (ASerg19). After the upgrade is completed 100% , the device is freezed on a green screen and stopped. if i enter bootloader mode (Trying to recover to Original ROM WM5) it gives me 4 Colors Screen with IPL 1.08.0001 , SPL 1.08.0001 . And the upgrade process halt on 0% and the ROM Utility from PC exits with an error [300]
Plz need your advise urgently
Thanks

Maged111 said:
I have HTC 4350 (Sim Locked) and i run WM6 utility with CID unlock (ASerg19). After the upgrade is completed 100% , the device is freezed on a green screen and stopped. if i enter bootloader mode (Trying to recover to Original ROM WM5) it gives me 4 Colors Screen with IPL 1.08.0001 , SPL 1.08.0001 . And the upgrade process halt on 0% and the ROM Utility from PC exits with an error [300]
Plz need your advise urgently
Thanks
Click to expand...
Click to collapse
Find an ruu suit your cid
http://forum.xda-developers.com/showthread.php?t=342273

I have HTC 4350 and i run WM6 utility with CID unlock (ASerg19).I closed flasher and only console program worked with my ppc, the device is freezed on a white screen and stopped. if i enter bootloader mode (Trying to recover to Original ROM WM5) it gives me 4 Colors Screen with IPL 1.08.0001 , SPL 1.08.0001 . And the upgrade process halt on 0% and the ROM Utility from PC exits with an error [300]
i have only sunday to recover. Plz help!
P.S. I tryed all ROMs what i downloaded

I have russian CID (HTC__A07) and ROMUpdate doesn`t want to flash

how do u know what cid you have if its stuck in boot loader?
its an htc model i downloaded the rom fromhtc but it reboots after 2% and shows error ( invalid model id ) error 244 thats really odd i dont get it.
any help would be great.
thanks

Thanks POF:How i Upgraded my DOPOD C800 with WM6

HI,
Thanks for POF and other forum members.
I upgraded my DOPOD C800 with WM6. Used POF HARD-SPL and Official HTC P4350 ROM.
Thanks
Jose

Can you mention the ipl and spl of your c800 before you had gone about with Hard-spl?

murali509 said:
Can you mention the ipl and spl of your c800 before you had gone about with Hard-spl?
Click to expand...
Click to collapse
Hi mine is- before upgrade
SPL 1.09.0001
IPL 1.09.0001
ROM 1.7.707.3 WWE
ROM Date 11/01/06
Radio 2.69.90
protocol 4.1.13.30
Ext rom 1.7.707.106
OS 1.7.0.0

I also have a Dopod C800 with the same ipl & spl. Can you direct me to the POF Hard-Spl files that you used? I have the HTC P4350 WWE WM6 RUU. Any help is greatly appreciated...scared to death I'll brick the phone!

How i upgraded My DOPOD C800
STEP I:
Download the following files
1) USPL --- Flah centre.rar file from
http://www.mediafire.com/?axtm5qlmbli
2) Official RUU -HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe
3) Make sure ur computer is always power on...not hibernated
Step II:
1) Create 2 folders eg:flash and rom.
2) Extract flash centre.rar in flash folder
3) Extract HTC_P4350.... ship.exe in rom folder .
( Use winrar or simply double click the file. It will start the upgrade window ,click next, then hold.Go to the temp folder, u will find all the extracted content there.Copy all the content to the new rom folder. After that cancel the upgrade window.)
4)After extracting the content in the rom folder ,*****delete the SPL.nbh file ****
Step III:
Connect your phone to the computer, make sure activesync is enabled (green icon)
Step IV
1)Open the flash folder --- follow the read me file in this folder
ie
2)Run herald-uspl.exe on your computer and follow the instructions on screen.
- it will run in command window and ask u to enter the values..follow the screen
After 2/3 steps if will ask u to chk the device-- the activesync green icon in ur computer will become grey and the screen of ur mobile will be blank-white.
!!! now u have sucessfully hard spl ur device!!!
**** dont touch or remove the connection or close any program****
3)After this it will start the RUU program ,follow the instruction ,click update ( u wont find any previous ROM installed),it may or will show ERROR [240] : FILE OPEN
clik finish/cancel and exit **this program only**.
4)Now without removing anything open the rom folder and clik the ROMUpdateUtility.exe file and follow the instruction.
thats it. ur mobile will be upgraded. dont get panic...it will take some time and the mobile will be white in colour.
Thanks
Jose

C800 upgrade success
Upgraded Dopod C800 with same IPL/SPL/RADIO parameters as mjose using his directions and it worked like a charm. Am WM6 with no issues now.
Thanks POF and mjose and everyone else on the forum for your help!

WHen using Herald-USPL - it is NOT permanently HARD-SPL!!!!
Please check the SPL now - and report....
if it doesn´t show 4.70.yang - then it is only USPL = temporarly CIDunlocked= NOT HARD-SPL
thx.

How much free memory did you get by upgrading to official HTC WM6? I got only 25mb free with no extended rom install!

C800 USPL vs Hard SPL
Poppamopps, you are quite correct. The update I performed was NOT Hard-SPL. I would prefer Hard-SPL but my understanding is that it should not be used on a device with IPL/SPL below 4.0. I am 1.9 both IPL/SPL.
Is there now a HARD-SPL that is safe to use on the Dopod C800 that is below 4.0 ?

billy-the-t said:
Poppamopps, you are quite correct. The update I performed was NOT Hard-SPL. I would prefer Hard-SPL but my understanding is that it should not be used on a device with IPL/SPL below 4.0. I am 1.9 both IPL/SPL.
Is there now a HARD-SPL that is safe to use on the Dopod C800 that is below 4.0 ?
Click to expand...
Click to collapse
nope. BUT try USP for falshing an official HTC rom with higher SPL and then HArd-SPL....

NICE! I successfully upgraded my C800 to wm6 using mjose instructions. Thanks to mjose and to all those involved.

Thanks to mjose, UPGRADED
Followed exactly what mjose said. Successfully upgraded. Thanks to everybody
Any idea how to install touch flo now?
C800
ROM: 4.17.405.2 WWE

need help please!
tried updating following mjose's listed method exactly, but failed after the screen went blank, and now my c800 seems to be dead (or bricked?!). can't even power on now. is there any way to revive it, or do i now have an expensive doorstop?

longj49 said:
need help please!
tried updating following mjose's listed method exactly, but failed after the screen went blank, and now my c800 seems to be dead (or bricked?!). can't even power on now. is there any way to revive it, or do i now have an expensive doorstop?
Click to expand...
Click to collapse
managed to do a hard reset but failed to restore, the screen now is green in color and showing:
IPL 1.09.0001
SPL 1.09.0001
then it's stuck there unless i remove the battery.
can anyone help please?

longj49 said:
managed to do a hard reset but failed to restore, the screen now is green in color and showing:
IPL 1.09.0001
SPL 1.09.0001
then it's stuck there unless i remove the battery.
can anyone help please?
Click to expand...
Click to collapse
i'm assuming nobody was awake. when you were posting....but i could be wrong.
i have no idea what a green screen means other than it's green hehe... and have never flashed a dopod.. but i'll pretend it's a herald?
can you put it in bootloader mode????
soft reset(put stylus in the hole)... and hold down the camera button..
you should get the tri-color screen..

mv3 said:
i'm assuming nobody was awake. when you were posting....but i could be wrong.
i have no idea what a green screen means other than it's green hehe... and have never flashed a dopod.. but i'll pretend it's a herald?
can you put it in bootloader mode????
soft reset(put stylus in the hole)... and hold down the camera button..
you should get the tri-color screen..
Click to expand...
Click to collapse
hey thanks! yes. i've got the asian herald. i got into bootloader mode as per your suggestion - is that the one with red/green/blue horizontal bands with a thinner white band at the bottom? ok what should i do next?

i was able to run the ROM Update utility after that, but got an error 300. checked the documentation and found out that i used the wrong version for my phone, which was RUU -HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe. would you know which one i should use?

i'm guessing your phone is not an English phone?
you need to find the native RUU for your phone.. Taiwanese Mandarin> HK Traditional? Japanese?.... if you can find it, then put your phone into bootloader and run the RUU file from your pc.
other than that, I don't know if anyone here has access to asian RUU's

doesn't look good, can't seem to find my region's wm6 rom anywhere. even tried to restore using the original wm5 rom from htc website, but still getting error 300. i think running herald-uspl.exe initially could have somehow caused some corruption.
well, i might have to visit dopod's service center soon.
thanks for your help, mv3, greatly appreciated.

did you try looking for official ruu from asia.htc.com
I suggest you load that before going to the repair centre

HTC P3300 stuck in boot screen

hi.
i got this p3300 and it doesnt fully turn on.After i press power in remains stuck on the boot screen : the one with the HTC logo and info about the rom:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
I tried to flash rom but it fails at 2 or 3% saying image file corruputed which i think its right because i dont think it was unlocked so you can write any rom you want.
I also tried USPL but that i get "NO devive connected" so i cant unlocked my device to write a proper rom into it.
I did all the above with the device in boot mode (record button+reset).
Any ideea?Pls help.
Thank you!

?
tried flashing with HTC_1.12.405.01_026790_WWE_SHIP says invalid model...

T-Mobile dead loop ?
I have similar problem with my artemis. I have a HTC P3300 from T-Mobile. It started with switching itself out, then it didn't want to boot, then it began to hang on bootscreen and at the moment i cannot start it at all (even the battery is fully charged and it is pluggen in my PC).
I suspect that T-mobile build in a dead loop somewhere in the software or hardware. It looks very suspicious to me that both mdas i had from T-Mobile start to make problems exactly a month or or two after the warranty is expired. and the problems develop in the same way in deteriorating manner.
It could be that the hardware cannot take it anymore and it starts to deteriorate exactly after the second year (handy for two years contracts).
Does anyone similar experiences or anyone solved that problem.
Sorry mates I cannot provide you with any info about my PPC (radio, rom version etc.) because I simply cannot get so far to be able to see that information.
Looking forward hearing from you
Cheerz

Hi, my problem is similar, but I need the ROM in ITAlian.
Information about my cellphone:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
Any ideea how to download this ROM? Pls help.
Thanks, Fernando.

Here the same...any one help?

kappp13 said:
hi.
i got this p3300 and it doesnt fully turn on.After i press power in remains stuck on the boot screen : the one with the HTC logo and info about the rom:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
I tried to flash rom but it fails at 2 or 3% saying image file corruputed which i think its right because i dont think it was unlocked so you can write any rom you want.
I also tried USPL but that i get "NO devive connected" so i cant unlocked my device to write a proper rom into it.
I did all the above with the device in boot mode (record button+reset).
Any ideea?Pls help.
Thank you!
Click to expand...
Click to collapse
Have you tried the CMON USPL? It's on Shady's ROM (the lite one) run this first! Be in Bootloader. Hold the Record Key (left key) and by holding that press Power key to switch on! Then try to Update your ROM

Get stuck in Bootloader

Hi !
My P4350 got stuck in the bootloader when I stied to flash a new ROM
Active sync doesn't recognize the P4350 anymore....
IPL 5.04.0002
SPL 4.10.0000
What should I do now ????

search for bootloader... there are so much threads with the same question

Did it fail during the flashing process? Do you see an error message on the bootloader screen? ActiveSync won't recognize the device unless it is booted up in Windows Mobile. If you can still get into the bootloader reflash the ROM from there. You don't have to flash ROM's connected via ActiveSync; you can do it from the bootloader as well.

It did fail during an flash !!
The only thing on the tri colour screen: is: IPL 5.04.0002 and SPL 4.10.0000
When I try to flash a new rom it gives errors, it starts for 2 seconds and than it stops with an error. (on several occasions different errors ==> one error at the time).

Post some of the error codes you get. Have you tried flashing a different ROM? You may need need to use MTTY if you get a ROM upgrade code message in the bootloader itself.

Ehhhhhhh what is: MTTY if you get a ROM upgrade code message in the bootloader itself.
I have NO idea what you mean.
I had before an TyTN and that was no problem ever (until it died..)

Miep Miep Zoeffff said:
Ehhhhhhh what is: MTTY if you get a ROM upgrade code message in the bootloader itself.
I have NO idea what you mean.
I had before an TyTN and that was no problem ever (until it died..)
Click to expand...
Click to collapse
Is ur device CID unlocked(HardSPLed)?

Miep Miep Zoeffff said:
It did fail during an flash !!
The only thing on the tri colour screen: is: IPL 5.04.0002 and SPL 4.10.0000
...
Click to expand...
Click to collapse
I'm a retard. You don't have HSPL flashed to your device. This is why it keeps failing when you try to flash a ROM. The HTC SPL on your device is blocking you from flashing unsigned (custom) or CID-mismatching ROM's to your device. All you should need to do is flash HSPL and then your custom ROM. Read the Wiki for this device if you need more information.

My phone was provided by Vodafone.
I have now Telfort.
I flashed Vodafone to Canonyang.
Then I tried to put the Dutch back on it and then it got stuck in the Bootloader.
Wasn't it hard SPL than??

Digital Outcast said:
I'm a retard. You don't have HSPL flashed to your device. This is why it keeps failing when you try to flash a ROM. The HTC SPL on your device is blocking you from flashing unsigned (custom) or CID-mismatching ROM's to your device. All you should need to do is flash HSPL and then your custom ROM. Read the Wiki for this device if you need more information.
Click to expand...
Click to collapse
I've tried 2 different HSPL now.
It goes well, even says 100 % on phone AND computer but than it gives error 270 'update error'
What now...

Have you followed this? I know it works for me...

I've seen it, but where do I have to intall the 3 cab files?
Do I have to install them on the microSD card?
Do I have to put them like this .cab or do I need them to unpack them??
please help!

Copy them to your phone, install all three on your phone's memory.

ehhhhhhhhhhhhhhhhh How should I do that ??

Oh right. I'm retarded. You're stuck in the bootloader... Sorry just reading too many threads and getting confused. Have you tried searching for "bootloader" or "Goldcard" in the ROM development forums? There are tons of explanations on how to recover from being stuck in the bootloader.

Have i deleted the rom?

Hi
Big problem.
1. CID Unlock - has worked
2. Flashed new ROM - has worked
After 100% the RUU says, Congrats... But too late i saw it was an ELFI ROM with 74MB but my Touch is an ELF 64/128.
But it booted! Once...
After the device has rebooted i made the screen settings and after windows has configured the device rebooted again.
After reboot the device doesnt come back.
I got the boot logo and then the screen will be black.
Hardreset doesnt work.
After FORMAT FAT & FORMAT IS COMPLETED the screen is always black.
Holding CAM Button and Softreset brings the Colored-Display.
IPL 2.24.0002
SPL 1.11.0000
A new CID unlock doesnt work because there is no active sync connection.
Flashing any other ROM works but it seems to have no effect.
RUU can connect but dont shows any installed image version.
If i click update the progressbar in the HTC display appears and goes to 100%.
After finished the update the device reboots and the screen is black.
Did i have erased my htc? Is there any solution for this problem?
*** EDIT ***
I tried this ht*p://forum.xda-developers.com/archive/index.php/t-359413.html
Now i have IPL 1.11.0002 an SPL 1.11.0000
Step G3/7 says:
Download T-Mobile 2.26 rom (ht*p://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship. exe.html)and flash it to your device! Done? Go to step G3 / 8
But the link is invalid. (yes ive seen the space at the . exe)
Does anyone have this file so i can try this step.
Ecosys

try upgrading the IPL/SPL to some 2.2X version. and next time post in an appropriate thread related to unbricking, u dont have to start a new thread.