Hi !
My P4350 got stuck in the bootloader when I stied to flash a new ROM
Active sync doesn't recognize the P4350 anymore....
IPL 5.04.0002
SPL 4.10.0000
What should I do now ????
search for bootloader... there are so much threads with the same question
Did it fail during the flashing process? Do you see an error message on the bootloader screen? ActiveSync won't recognize the device unless it is booted up in Windows Mobile. If you can still get into the bootloader reflash the ROM from there. You don't have to flash ROM's connected via ActiveSync; you can do it from the bootloader as well.
It did fail during an flash !!
The only thing on the tri colour screen: is: IPL 5.04.0002 and SPL 4.10.0000
When I try to flash a new rom it gives errors, it starts for 2 seconds and than it stops with an error. (on several occasions different errors ==> one error at the time).
Post some of the error codes you get. Have you tried flashing a different ROM? You may need need to use MTTY if you get a ROM upgrade code message in the bootloader itself.
Ehhhhhhh what is: MTTY if you get a ROM upgrade code message in the bootloader itself.
I have NO idea what you mean.
I had before an TyTN and that was no problem ever (until it died..)
Miep Miep Zoeffff said:
Ehhhhhhh what is: MTTY if you get a ROM upgrade code message in the bootloader itself.
I have NO idea what you mean.
I had before an TyTN and that was no problem ever (until it died..)
Click to expand...
Click to collapse
Is ur device CID unlocked(HardSPLed)?
Miep Miep Zoeffff said:
It did fail during an flash !!
The only thing on the tri colour screen: is: IPL 5.04.0002 and SPL 4.10.0000
...
Click to expand...
Click to collapse
I'm a retard. You don't have HSPL flashed to your device. This is why it keeps failing when you try to flash a ROM. The HTC SPL on your device is blocking you from flashing unsigned (custom) or CID-mismatching ROM's to your device. All you should need to do is flash HSPL and then your custom ROM. Read the Wiki for this device if you need more information.
My phone was provided by Vodafone.
I have now Telfort.
I flashed Vodafone to Canonyang.
Then I tried to put the Dutch back on it and then it got stuck in the Bootloader.
Wasn't it hard SPL than??
Digital Outcast said:
I'm a retard. You don't have HSPL flashed to your device. This is why it keeps failing when you try to flash a ROM. The HTC SPL on your device is blocking you from flashing unsigned (custom) or CID-mismatching ROM's to your device. All you should need to do is flash HSPL and then your custom ROM. Read the Wiki for this device if you need more information.
Click to expand...
Click to collapse
I've tried 2 different HSPL now.
It goes well, even says 100 % on phone AND computer but than it gives error 270 'update error'
What now...
Have you followed this? I know it works for me...
I've seen it, but where do I have to intall the 3 cab files?
Do I have to install them on the microSD card?
Do I have to put them like this .cab or do I need them to unpack them??
please help!
Copy them to your phone, install all three on your phone's memory.
ehhhhhhhhhhhhhhhhh How should I do that ??
Oh right. I'm retarded. You're stuck in the bootloader... Sorry just reading too many threads and getting confused. Have you tried searching for "bootloader" or "Goldcard" in the ROM development forums? There are tons of explanations on how to recover from being stuck in the bootloader.
Related
Hello everybody,
i wanted to update my new HTC Polaris with another radio rom. It failed during Update process.
After that, it doesn't boot anymore. Now it stays in "3 colour mode". USB is recognized, when i plug in. I've tried to update again and again, but it stays at 0% and then i get an " Error 262". Tested with XP and Vista, no luck.
Any idea, how i get my device work again, don't want to RMA...
(Sorry, for my bad english, i hope you understand.)
Did u try to flash the official ROM again?
At the moment, there is no original Polaris GER ROM in DL section. I've tried O2_ger, Bepe, no luck.
Try the WWE version available in this forum. Once recover, flash the hard SPL and then flash whatever u desired.
Hope this can help!
i tried, but i get an "ERROR [294] : INVALID VENDER ID" at 1%. I think i need the Original German Rom...
Put the device in bootloader mode then flash with HARD-SPL
After SPL flashed put it again in bootloader mode and flash a rom that you want.
It is already in Bootloadermode = 3 Colour Mode.
When i try Hard-SPL Flash, it also hangs at 0% and give Error 262.
I've also tried, rename *.nbh file to POLADIAG.nbh or POLAIMG.nbh. Here it hangs in the Loading screen. Used Micro-SD formatted as FAT32.
I'm having the exact same problem.. did you manage to work it out?
why did I have to update the rom....??
damn
Did you try this?
http://forum.xda-developers.com/showpost.php?p=1983845&postcount=4
thank you very much! it worked!. sigh!
many many thanks
while trying some roms i stupidly removed hard spl
and now i cant install or flash any rom some local repair shops advised me to change motherboard do i realy have to???
mdrcute said:
while trying some roms i stupidly removed hard spl
and now i cant install or flash any rom some local repair shops advised me to change motherboard do i realy have to???
Click to expand...
Click to collapse
did you try to reinstall hard spl again?
check this out http://forum.xda-developers.com/showthread.php?t=381600
yes i tried it didnt work
i tried to hard reset too
the installing of the original rom is the only one can be started and will stop in the middle to give me an error
Hhmmmm
mdrcute said:
yes i tried it didnt work
i tried to hard reset too
the installing of the original rom is the only one can be started and will stop in the middle to give me an error
Click to expand...
Click to collapse
how did you uninstall hard spl in first place...
by putting back original spl
What error you get when you hard spl?
it stays on 0% and never move then it asks me to make a recover
1. Unlock your polaris
2. Than Hard-spl your device
PS: Only use the hard spl in the link provided. Disable your antivirus before procedure.
this might work.
thanks at first
but the first link cant be downloaded
and i think it is just an earlier version of hard spl 2.0
so i think it wont be usefull
From what I've read on a while ago on XDA, if your rom flash progress hangs in the middle of the process, it may be because of the fact that your current radio is too new for your 'old', original rom. You should try to flash an earlier radio before you flash the complete original (6.0?) rom.
And if you get it flash half of your rom, you probably didn't remove HardSPL, but correct me if I'm wrong, I'm not that familiar with it.
pola100
spl-1.25.0000
cpld-2
this is on my boot loader or whatever you call it
ok here it is what i need:
I just need to know the how to down grade my radio if i have no windows working in my pda and no hard spl
could any one help me???
mdrcute said:
pola100
spl-1.25.0000
cpld-2
this is on my boot loader or whatever you call it
ok here it is what i need:
I just need to know the how to down grade my radio if i have no windows working in my pda and no hard spl
could any one help me???
Click to expand...
Click to collapse
As I recall, the figures above indicate that you do have the original SPL. You should try to flash an original rom (if you don't have one, i have a dutch one here (wm6.0). If that doesn't work you should try to flash hardspl (hold the camera button while softresetting to enter bootloader) ( http://forum.xda-developers.com/showthread.php?t=351964 ) and then try to flash a newer rom.
Where are you from?
Btw. I forgot to tell you that you need to flash an old radio too if you're going to flash the original rom. (if you don't have one already).
And when you have hardspl on your device, it'd be wise to flash a rom which include a radio.
I'll be away for a couple of hours, so I've put the original (dutch WM6.0) rom (incl. the original spl, but I think (dont know for sure) you need hardspl2.0 just to flash anything.) online here, let me know if your figured it out.
well thank you for all the help
but i am sadly informing it didnt work if the problem is the radio the i just need to flash another one .
it is just i cant or i dont know the right method to flash the necessary radio
would any one please tell how to flash radio from the boot loader when i dont have hard spl
Maybe a stupid question, but why can't you flash hardspl2? And do you have an unlocked device? You don't live in the Netherlands by any chance right?
why I can't flash hard spl 2 ?
actually I don't know
maybe because I am stuck in the boot loader
and sadly I am living in Saudi Arabia so we don't have much programmers around here nor people who have PDA
that's why I can't find someone to help
Can you describe exactly what you do step by step on your pc and pda and how your hardware is connected?
update: and tell me what messages are on your screen and if you get any errors
well first i connect usb so the pda directly starts boot loader (the screen with three colours)
after that whatever (ROMUpdateUtility.exe) i use the installing stops to give me this messege:
the rom update utility has encountered communication errors during the update process . the program will guide you step by step to recover from the errors so you can continue with the update.
this happens with every rom i tried including the har spl exept for the original rom it advance untill 38% then stops and give me the same messege.
if i try the (step by step ) process it ends up the same way .
anyway what i understand that my problem will end once i put (hard spl)
or if flashed another radio all i need to know is how to do either of them from the boot loader.
i have been so needy but sorry for that i am just sad about my pda i like it alot
I dont think it changes anything, but you do keep the camera button pressed while softresetting your device to get into the bootloader?
Usually your device only gets to the bootloader when you do that, but i can imagine that when your rom update failed and the device cannot boot a rom, it stays in the bootloader, but not in flash mode? Worth a try..
Tell me what appear in your PDA screen during boot. I want to know the information on the first screen like below:
R:
G:
D:
These information usually appear on the right bottom corner or your screen when you boot your device.
Hi guys,
my Orbit failed in the middle of a flash (in Windows with RomUpdateUtility).
Now I can only get to the bootloader, nothing else.
I think the CID unlock must have failed somehow, because using the SDcard method I cannot flash any cooked ROM. In fact I cannot flash ANY ROM now! I have tried the default shipped 02 ROM's but they all fail at 5% in RomUpdateUtility.exe thru windows, and also fail via the SDcard method (it sits there forever saying reading SD card).
Any ideas? Any other O2 ROM's I should try? Or can I send it for repair to any one off this forum? Should I bin it, maybe the flash chip is faulty?
IPL 1.25.0001
SPL 1.25.0000
Tried (and failed) ROM list:
HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_R.exe
RUU_Artemis_O2_UK_3.4.206.2_4.1.13.28_02.67.90_Ship.exe
HTC P3300_SPA_3.13.412.1_4.1.13.44_02.94.90_Ship_R.exe g
Arteimg.nbh from http://rapidshare.com/files/41614347/OrbitO2UK.rar
art_htcwwe_11240501_026790_wwe_ship from http://www.expansys.com/ft.aspx?k=79618
Vanilla 4.01
Black & Blue 5.0
Thanks for reading, underzone
I have the exact same problem only mine is stuck with IPL 3.04.0001 and SPL 3.04.0000
When i try the original rom (o2 factory) it goes at 4% into Error 226 (something with the Extrom), any other rom wont work since no USPL... damn it.
Any Ideas on this?
Hi there,
Hope you can help me...
Since i bought my Cruise, I flashed it to the newest ROM version of HTC and it automatically installed SPL 3.13 with.
The problem is that if I want to install the WM 6.5 rom, I have to "Downgrade" My SPL version from 3.13.0000 to 2.20.
I followed the steps explained by "Olipro", but when the upgrade starts, RUU kills activesync (seems to be normal) and when the phone normally reboots in bootloader mode (like when you flash a new rom), nothing happens. The phone didn't shutdown and tries to establish a new USB connection !
I tried to turn manually the phone in bootloader mode on to force the SPL update, but the % bar stays at 0 and RUU returns a communication error (262).
I tried also to install the wm 6.5 rom without install SPL 2.2, but it crashes (stays @ 0% too)
I don't know how to install this stinky version of HARD SPL.
Heeeellllpppp !!
NOTE : I tried with or without µSd, does the same thing.
Thx
hmm try disabling firewall and antivirus one of them may be blocking the connection. Thats my only thought about it.
Thank you for the answer but it don't work...
Nobody can help me ?
Try to extract the files from the newest htc rom to a new folder, and then copy the "RUU_Signed.nbh" from the SPL V2 folder to the extracted files (to the new folder) and run the "ROMUpdateUtility.exe" from the extracted files (from the new folder).
nope ...
Please, consider my asks...
I know there is necessarily a solution but I have not yet found.
I don't know where/why it is crashing.
What does the HTC need to downgrade the hardspl ?
Is there a protection that can't be bypassed with the 3.13 ?
The only thing that I can do atm, is flashing the official HTC rom (useless ^^).
The actual version of my rom is :
_HTC Touch Cruise_RUU_Polaris_HTC_FRA_3.13.406.0_radio_sign_25.85.30.07_1.59.42.15_Ship
Thanking you in advance...
Pixel69 said:
Please, consider my asks...
I know there is necessarily a solution but I have not yet found.
I don't know where/why it is crashing.
What does the HTC need to downgrade the hardspl ?
Is there a protection that can't be bypassed with the 3.13 ?
The only thing that I can do atm, is flashing the official HTC rom (useless ^^).
The actual version of my rom is :
_HTC Touch Cruise_RUU_Polaris_HTC_FRA_3.13.406.0_radio_sign_25.85.30.07_1.59.42.15_Ship
Thanking you in advance...
Click to expand...
Click to collapse
HSPL 3.13? In this ROM is ver. 3.13 drivers, not HSPL... If you have original ROM and you dont install Olipros HPSL, you have original HTC SPL...
When I enter bootloader mode, the HSPL version is : 3.13.0000
Of course it's the original htc HSPL.
The problem is that I can't downgrade it to the olipro's version : 2.20.
Did you try it on other PC?
2 PCs, 2 USB cables..
The official rom upgrade works fine, I dont think that the problem comes from the computer.
definite guide:
1. establish a connection with activesync via usb (orbit2 to pc)
2. start the romupdateutility provided in hardspl folder.
3. before it starts flashing, you need to also follow on-screen instructions on orbit2!!! execute jump-spl and stuff: click yes on orbit2!!
4. when the orbit2 states: Replug USB. you need to plug the usb-cable once off and then put it back to connect to your pc.
5. it starts flashing and restarts after its done.
Hi Manaaa,
I don't know what is jumpslp ??
I found it on the web (xda..), copied it in my "my documents" folder, ran it but it asks me a jump address (default is 0x00000000) and an spl (*nb) file..
What is jump spl ? What is the address to jump to? and where can I find the *nb file ?
In the olipro's hspl folder is only a *nbh file.
Thank you
I wouldn't recommend using a jump spl for our phones if there isn't one in the Hardspl Pack then one is not needed to be run.
Personally im still really confused by this so if i get it straight.
You are synced with activesync.
Run the file for Hardspl Run RomUpdateUtility.exe
Then go though. It switches off activesync.
Then what?? Exactly Does it ask you to replug the cable? Do you get the rom flash screen (with %) at all??
Also i dont think that spl flashes can be run from the booloader as it has to be a modded bootloader (jumpspl if you will), loaded by the program to be able to flash the new hardspl.
Also i know very little on this, this is as much as i understand it to be.
chris10230 said:
You are synced with activesync. OK
Run the file for Hardspl Run RomUpdateUtility.exe OK
Then go though. It switches off activesync. OK
Then what?? Exactly Does it ask you to replug the cable? NO
Do you get the rom flash screen (with %) at all?? NO
Click to expand...
Click to collapse
Normally, after killing activesync, the phone turns into bootloader mode. Mine stays in winCE and tries to establish new usb connection...
I also decided to force manually bootloader mode and killing activesync by myself.
I ran RUU again, it first checked the phone state (such as battery >50%, connectivity...)
CHECK : OK
Next step, by clicking "NEXT" on the RUU interface, the phone turns in "% mode" and the update starts but stays at 0%.
After a while, RUU returns an update error (such as 262).
Noway to flash hardSPL :'-( , v3.13 seems to be "write protected".
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
Click to expand...
Click to collapse
That is what error 262 is but really dont see why this happens either. And since you can boot into windows its not much help.
So it just wont go to flash it when you click it through, hmm
Your last resort would be to PM cmonex as she will have helped make this with oilpro. Ask and see if she can shed some light on this one. Maybe something has gone wrong somewhere (quite likely) that we don't know how to fix.
Stupid question but have you tried downloading, unzipping it again? May have been a bad dl... or unzip
Have tested it with about 10# DLs...
I PM'd Olipro, waiting for a response now
Flash back to HardSPL and don't Re-Plug
Hi Pixel,
Herewith are guide for you
1) Flash back to HardSPL and don't re-plug until end of session (5 minutes)
2) Flash back to original SPL 3.13 on this post . This original SPL for HTC Touch Cruise only
3) After you do this you cannot flash with other Cooked ROM or Shipped ROM
with different ID, unless you flash back to HardSPL
Good Luck my friend
I have exactely in the same configuration as Pixel69 with the same result.
I've tried to an other PC without any change.
Has somebody any idea?
Just had an idea what OS are you running to do it?
If its not 7 may not be fully compatible... Shot in the dark really
hello ... uhm, i was ... what i was!? ... well, i tried to return my phone from hspl to ospl version, i flashed magldr and android to windows stock rom, but, when i tryed to flash it from hspl to spl i did this :
- Extracked 'Ruu.signed.nbh' and changed it name to 'leoimg.nbh' than i copied it to my sd card and then i tryed to hard reset my phone ...
- The loading screan was activated and tryed to update something, but then it crashes and now i cant do anything .... i can't flash anyrom, any spl, any bootloader ... it always says that 'Software wasn't updated' (or something like that) .... it seams like its locked ...
so, pls, help me to fix this thing.... thx XDA gods ^_^
We know you're worried, but you have given no details at all,, what model hd2, what stock rom you flashed, what spl shows in bootloader(don't assume you know, check it visually again now) what exactly "the loading screen started..... crashed...blah blah" actually means.
Details details details.
oh god, how rude of me ... well, im useing htc leo hd2 t8585 and i have stock rom windows mobile 6.5 //3.14.405.2// now, but before that i had android 2.3.7 gingerbread 1.1.3 magldr and 2.08 hspl ... i sucessfully removed android and magldr but hspl remains the same .... than, i tried to remove hspl with ospl and when i try to hard reset my phone i see loading screen of ospl but then it pops 'Not allowed' screen .... like its locked or something .... and when i try to boot my phone it stucks again there and redirect me to HSPL picture (u know those colors) and pops the message 'rom update is not finished, try again later ' ... i know it sounds ****ed up
Run Hspl4 with phone in bootloader, choose 3.03.0000, flash stock rom again. If you still get errors you aren't using the correct stock rom for your region/provider.
to remove hspl download hspl2 and flash the 1.42.0000spl !!
now try to flash a stock rom !!
aaki_rocker said:
to remove hspl download hspl2 and flash the 1.42.0000spl !!
now try to flash a stock rom !!
Click to expand...
Click to collapse
That's dangerous advice without checking if its deff not a tmous. LOADS of tmouses have been bricked by the owner trying to get to spl 1.x
Just cos he said its a t8585, it wouldn't be the first time a tmous user has referred to it as an 8585