Hello everybody,
i wanted to update my new HTC Polaris with another radio rom. It failed during Update process.
After that, it doesn't boot anymore. Now it stays in "3 colour mode". USB is recognized, when i plug in. I've tried to update again and again, but it stays at 0% and then i get an " Error 262". Tested with XP and Vista, no luck.
Any idea, how i get my device work again, don't want to RMA...
(Sorry, for my bad english, i hope you understand.)
Did u try to flash the official ROM again?
At the moment, there is no original Polaris GER ROM in DL section. I've tried O2_ger, Bepe, no luck.
Try the WWE version available in this forum. Once recover, flash the hard SPL and then flash whatever u desired.
Hope this can help!
i tried, but i get an "ERROR [294] : INVALID VENDER ID" at 1%. I think i need the Original German Rom...
Put the device in bootloader mode then flash with HARD-SPL
After SPL flashed put it again in bootloader mode and flash a rom that you want.
It is already in Bootloadermode = 3 Colour Mode.
When i try Hard-SPL Flash, it also hangs at 0% and give Error 262.
I've also tried, rename *.nbh file to POLADIAG.nbh or POLAIMG.nbh. Here it hangs in the Loading screen. Used Micro-SD formatted as FAT32.
I'm having the exact same problem.. did you manage to work it out?
why did I have to update the rom....??
damn
Did you try this?
http://forum.xda-developers.com/showpost.php?p=1983845&postcount=4
thank you very much! it worked!. sigh!
many many thanks
Related
help!!i really no idea with my devices as i try to flash it to wm6,then it stop at 50% and reboot then hang at bootloader screen,i try to flash again but when it reach 1% it will restart and update error msg prompt, it said "the image is corrupted" if im using sd card flash,it come out 00068002 on the top of the"loading" words then go in the tri colour screen again. anyone pls help me pls!!!!!!!!!!!!
Man I wish you guys would do a LITTLE research on how to flash stuff... I bet you don't have Hard SPL installed even though its splashed about all over the forum.....
Try to download the SHIPPED STOCK ROM again... It seems you have a corrupted download.
Once you have downloaded the rom, then reset Hermes into TRUE bootloader, not the failed flash you are getting.
On the PC, untick "Allow USB connections" in active sync the connect Hermes.
Double click on RUU_Wrapper.exe of the freshly downloaded rom. Follow prompts...
Pray......
Then, if it works, INSTALL HARD SPL V7...........
thanks for rely brother,i hv tried download a shipped rom from here and i hv follw all the prosedure u thought,it still doesnt works,oh no....................
Error 226 flash write
Hello friends i'm italian and sorry for my english.
I have a problem with my hermes200.
I have flashing on my tytn a rom kitchen using "package tool by bepe" with nb IPL, SPL, Mainsplash, Subsplash, ExtROM and GSM extrated from original rom htc tytn wm6 and a OS.nb extrated from rom kaiser ITA wm6.1.
When the flashing is termined the hermes don't start: push power botton but the screen is black and only green light is ON.
I have flashed original htc hermes wm6 but i have "error 226 flash write" when the process is at 89%.
I have IPL-1.04 and SPL-2.04. CID.
SPL 2.10, SPL 2.20, SPL 2.30 are not possibile to install.
i have try command with mtty tool:
- task 32 -> FF
- task 28 -> format storage success
- task 2a -> fix bad block
- info 8 -> much bad block Os Win CE
I've try to reflash the original rom but the problem is the same
The battery don't possibile to charge and level should be of 40%.
Help me please....
Tanks!!!
hi...
i have 3LIT3 VI FULL with Hard-SPL-V2 and i want to install the original rom again (RUU_Polaris_HTC_PTG_3.13.410.0_radio_sign_25.85.30.07_1.59.42.15_Ship)... but wen i flash it freeze ate 32% and FAIL! i do a soft reset and then it go to 3 color screen. to solve this i flash again the Hard-SPL-V2 and the phone work again normaly... i try to flash my Polaris using the microSD card with original rom but it give me a error on the screen:
00018003
POLAIMG.nbh - FAIL
RADIO_V2 - RSA Fail
BOOTLOADER -
SPLASH1 -
OS -
Update Terminate
UPDATE FAIL
Click to expand...
Click to collapse
i try to flash the original spl and the radio 1.59.42.15 in the same way and all ways but still dont work it return again to rom 1.65.xx.xx and the Hard-SPL-V2
IM STUCK TO THIS ROM
i searched everywere and nothing help me..
my polaris is originaly unlocked and i have windows vista ultimate sp1.
sorry my english
PLEASE HELP
SOLVED!
I search more and found this http://forum.xda-developers.com/showthread.php?t=503124 and searched for radio 1.58.21.23 and found http://forum.xda-developers.com/showpost.php?p=2144280&postcount=4... i flash my cruise with RUU_Polaris_HTC_WWE_1.25.405.1_radio_sign_25.65.30 .04_1.58.21.23_Ship and it works!!! then i just flash with original portuguese rom normaly...
tanks anyway
Hi !
My P4350 got stuck in the bootloader when I stied to flash a new ROM
Active sync doesn't recognize the P4350 anymore....
IPL 5.04.0002
SPL 4.10.0000
What should I do now ????
search for bootloader... there are so much threads with the same question
Did it fail during the flashing process? Do you see an error message on the bootloader screen? ActiveSync won't recognize the device unless it is booted up in Windows Mobile. If you can still get into the bootloader reflash the ROM from there. You don't have to flash ROM's connected via ActiveSync; you can do it from the bootloader as well.
It did fail during an flash !!
The only thing on the tri colour screen: is: IPL 5.04.0002 and SPL 4.10.0000
When I try to flash a new rom it gives errors, it starts for 2 seconds and than it stops with an error. (on several occasions different errors ==> one error at the time).
Post some of the error codes you get. Have you tried flashing a different ROM? You may need need to use MTTY if you get a ROM upgrade code message in the bootloader itself.
Ehhhhhhh what is: MTTY if you get a ROM upgrade code message in the bootloader itself.
I have NO idea what you mean.
I had before an TyTN and that was no problem ever (until it died..)
Miep Miep Zoeffff said:
Ehhhhhhh what is: MTTY if you get a ROM upgrade code message in the bootloader itself.
I have NO idea what you mean.
I had before an TyTN and that was no problem ever (until it died..)
Click to expand...
Click to collapse
Is ur device CID unlocked(HardSPLed)?
Miep Miep Zoeffff said:
It did fail during an flash !!
The only thing on the tri colour screen: is: IPL 5.04.0002 and SPL 4.10.0000
...
Click to expand...
Click to collapse
I'm a retard. You don't have HSPL flashed to your device. This is why it keeps failing when you try to flash a ROM. The HTC SPL on your device is blocking you from flashing unsigned (custom) or CID-mismatching ROM's to your device. All you should need to do is flash HSPL and then your custom ROM. Read the Wiki for this device if you need more information.
My phone was provided by Vodafone.
I have now Telfort.
I flashed Vodafone to Canonyang.
Then I tried to put the Dutch back on it and then it got stuck in the Bootloader.
Wasn't it hard SPL than??
Digital Outcast said:
I'm a retard. You don't have HSPL flashed to your device. This is why it keeps failing when you try to flash a ROM. The HTC SPL on your device is blocking you from flashing unsigned (custom) or CID-mismatching ROM's to your device. All you should need to do is flash HSPL and then your custom ROM. Read the Wiki for this device if you need more information.
Click to expand...
Click to collapse
I've tried 2 different HSPL now.
It goes well, even says 100 % on phone AND computer but than it gives error 270 'update error'
What now...
Have you followed this? I know it works for me...
I've seen it, but where do I have to intall the 3 cab files?
Do I have to install them on the microSD card?
Do I have to put them like this .cab or do I need them to unpack them??
please help!
Copy them to your phone, install all three on your phone's memory.
ehhhhhhhhhhhhhhhhh How should I do that ??
Oh right. I'm retarded. You're stuck in the bootloader... Sorry just reading too many threads and getting confused. Have you tried searching for "bootloader" or "Goldcard" in the ROM development forums? There are tons of explanations on how to recover from being stuck in the bootloader.
Hi there,
Hope you can help me...
Since i bought my Cruise, I flashed it to the newest ROM version of HTC and it automatically installed SPL 3.13 with.
The problem is that if I want to install the WM 6.5 rom, I have to "Downgrade" My SPL version from 3.13.0000 to 2.20.
I followed the steps explained by "Olipro", but when the upgrade starts, RUU kills activesync (seems to be normal) and when the phone normally reboots in bootloader mode (like when you flash a new rom), nothing happens. The phone didn't shutdown and tries to establish a new USB connection !
I tried to turn manually the phone in bootloader mode on to force the SPL update, but the % bar stays at 0 and RUU returns a communication error (262).
I tried also to install the wm 6.5 rom without install SPL 2.2, but it crashes (stays @ 0% too)
I don't know how to install this stinky version of HARD SPL.
Heeeellllpppp !!
NOTE : I tried with or without µSd, does the same thing.
Thx
hmm try disabling firewall and antivirus one of them may be blocking the connection. Thats my only thought about it.
Thank you for the answer but it don't work...
Nobody can help me ?
Try to extract the files from the newest htc rom to a new folder, and then copy the "RUU_Signed.nbh" from the SPL V2 folder to the extracted files (to the new folder) and run the "ROMUpdateUtility.exe" from the extracted files (from the new folder).
nope ...
Please, consider my asks...
I know there is necessarily a solution but I have not yet found.
I don't know where/why it is crashing.
What does the HTC need to downgrade the hardspl ?
Is there a protection that can't be bypassed with the 3.13 ?
The only thing that I can do atm, is flashing the official HTC rom (useless ^^).
The actual version of my rom is :
_HTC Touch Cruise_RUU_Polaris_HTC_FRA_3.13.406.0_radio_sign_25.85.30.07_1.59.42.15_Ship
Thanking you in advance...
Pixel69 said:
Please, consider my asks...
I know there is necessarily a solution but I have not yet found.
I don't know where/why it is crashing.
What does the HTC need to downgrade the hardspl ?
Is there a protection that can't be bypassed with the 3.13 ?
The only thing that I can do atm, is flashing the official HTC rom (useless ^^).
The actual version of my rom is :
_HTC Touch Cruise_RUU_Polaris_HTC_FRA_3.13.406.0_radio_sign_25.85.30.07_1.59.42.15_Ship
Thanking you in advance...
Click to expand...
Click to collapse
HSPL 3.13? In this ROM is ver. 3.13 drivers, not HSPL... If you have original ROM and you dont install Olipros HPSL, you have original HTC SPL...
When I enter bootloader mode, the HSPL version is : 3.13.0000
Of course it's the original htc HSPL.
The problem is that I can't downgrade it to the olipro's version : 2.20.
Did you try it on other PC?
2 PCs, 2 USB cables..
The official rom upgrade works fine, I dont think that the problem comes from the computer.
definite guide:
1. establish a connection with activesync via usb (orbit2 to pc)
2. start the romupdateutility provided in hardspl folder.
3. before it starts flashing, you need to also follow on-screen instructions on orbit2!!! execute jump-spl and stuff: click yes on orbit2!!
4. when the orbit2 states: Replug USB. you need to plug the usb-cable once off and then put it back to connect to your pc.
5. it starts flashing and restarts after its done.
Hi Manaaa,
I don't know what is jumpslp ??
I found it on the web (xda..), copied it in my "my documents" folder, ran it but it asks me a jump address (default is 0x00000000) and an spl (*nb) file..
What is jump spl ? What is the address to jump to? and where can I find the *nb file ?
In the olipro's hspl folder is only a *nbh file.
Thank you
I wouldn't recommend using a jump spl for our phones if there isn't one in the Hardspl Pack then one is not needed to be run.
Personally im still really confused by this so if i get it straight.
You are synced with activesync.
Run the file for Hardspl Run RomUpdateUtility.exe
Then go though. It switches off activesync.
Then what?? Exactly Does it ask you to replug the cable? Do you get the rom flash screen (with %) at all??
Also i dont think that spl flashes can be run from the booloader as it has to be a modded bootloader (jumpspl if you will), loaded by the program to be able to flash the new hardspl.
Also i know very little on this, this is as much as i understand it to be.
chris10230 said:
You are synced with activesync. OK
Run the file for Hardspl Run RomUpdateUtility.exe OK
Then go though. It switches off activesync. OK
Then what?? Exactly Does it ask you to replug the cable? NO
Do you get the rom flash screen (with %) at all?? NO
Click to expand...
Click to collapse
Normally, after killing activesync, the phone turns into bootloader mode. Mine stays in winCE and tries to establish new usb connection...
I also decided to force manually bootloader mode and killing activesync by myself.
I ran RUU again, it first checked the phone state (such as battery >50%, connectivity...)
CHECK : OK
Next step, by clicking "NEXT" on the RUU interface, the phone turns in "% mode" and the update starts but stays at 0%.
After a while, RUU returns an update error (such as 262).
Noway to flash hardSPL :'-( , v3.13 seems to be "write protected".
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
Click to expand...
Click to collapse
That is what error 262 is but really dont see why this happens either. And since you can boot into windows its not much help.
So it just wont go to flash it when you click it through, hmm
Your last resort would be to PM cmonex as she will have helped make this with oilpro. Ask and see if she can shed some light on this one. Maybe something has gone wrong somewhere (quite likely) that we don't know how to fix.
Stupid question but have you tried downloading, unzipping it again? May have been a bad dl... or unzip
Have tested it with about 10# DLs...
I PM'd Olipro, waiting for a response now
Flash back to HardSPL and don't Re-Plug
Hi Pixel,
Herewith are guide for you
1) Flash back to HardSPL and don't re-plug until end of session (5 minutes)
2) Flash back to original SPL 3.13 on this post . This original SPL for HTC Touch Cruise only
3) After you do this you cannot flash with other Cooked ROM or Shipped ROM
with different ID, unless you flash back to HardSPL
Good Luck my friend
I have exactely in the same configuration as Pixel69 with the same result.
I've tried to an other PC without any change.
Has somebody any idea?
Just had an idea what OS are you running to do it?
If its not 7 may not be fully compatible... Shot in the dark really
I`m writing this after almost a full day of searching and testing with no luck.
I have friend who tried to upgrade Rom into his Touch HD and failed.
Right now all the phone does is to start in tricolor menu. I have tried several Roms but when trying to flash they get stuck at 0% and after a while it ends up with error 262. Same thing happens when trying to upgrade to HSPL also (i do not have a working Rom on this phone, just a tricolor menu which starts automatically when phone started ). I have tried to flash rom with SD card (2Gb), and with Ruu with Win7 and XP.
Info :
Blac100 32M
SPL-1.54.0000
MicroP-Blackstone (LED) V6
How can i recover this phone? Can anyone pls help me ?
I have attached a Print screen of my folder dedicated to this phone. Everything there i have tried.
oh my god...you tried to flash a ROM without SPL!? are zou crazy? first you have to flash HSPL, search for the latest spl 1.56 olinex and when you get the (.nbh) file, name it to Blacimg.nbh and put on SD card (on root!) then it will appear a confirming message to install the .nbh, and you confirm.
note: not having HSPL is pratically the same thing has having a locked bootloader...
mfsr98 said:
oh my god...you tried to flash a ROM without SPL!? are zou crazy? first you have to flash HSPL, search for the latest spl 1.56 olinex and when you get the (.nbh) file, name it to Blacimg.nbh and put on SD card (on root!) then it will appear a confirming message to install the .nbh, and you confirm.
note: not having HSPL is pratically the same thing has having a locked bootloader...
Click to expand...
Click to collapse
Yes i know... not me was the one who tried... i have received it like this, and trying to recover it. The idea is when trying to install HSPL it get stuck at 0%, and the alternate method implies booting into system... but i do not have a system on device. I have also tried to download the official rom from HTC website.... and after 1% it says "invalid vender ID".
Flash SPL from sd card. Name the file as BLACimg.nbh and put on sd root. Then enter Tricolor screen (If it doesnt go automatically) and confirm the flashing. Then SEE If you get the htc logo and a empty shell ( black screen) . If you do good, now normally Flash a ROM ( you can use sd method or throug pc
---------- Post added at 03:26 PM ---------- Previous post was at 03:24 PM ----------
If it doesnt work try another sd
This what i`m trying, but it get stuck to "loading" . I have downloaded "HSPLWrapper_Blackstone_156OliNex" , started "HSPLWrapper_Blackstone_156OliNex.exe" , nbh file apeared in same folder, copied to SD (formated to Fat32, default alocation unit) started phone, gone in tricolor then "loading" message on screen and nothing else (for 10 minutes already).
hmmm... keep waiting
finaly solved
I have finaly solved it. First you need Windows XP on PC. Download USPL 2.5 and open a CMD window. Start utility to upgrade to HSPL OLINEX and after presing update , and progres bar apears on phone execute fast the uspl in cmd window (otherwise it will say it cannot open USB port). After this you phone will reboot in tricolor but instead of SPL you will se USPL 1.14. Disconect usb from phone and reconect it, now it should say is connected to USB. Relaunch the HSPL update utility and wait to get to 100%. When done phone will reboot into system (if you have any).
its a way, but you could simply flash hspl trough sd (use other sd if that doesnt work, I needed to cange too!)
mfsr98 said:
its a way, but you could simply flash hspl trough sd (use other sd if that doesnt work, I needed to cange too!)
Click to expand...
Click to collapse
Believe me ! i have tried with four different SD cards, one of them indeed did not worked (a 4Gb). I do not know exactly what happened to the phone but it was impossible to flash anything to that phone (except some shipped roms witch would fail after 1% with invalid vender ID on pc and some 28008 error via card) . As i said one post earlier, the only way was via USPL, witch needed a workaround method (because it too failed with "could not access usb port" error). And the USPL worked only on Win XP and had a very narrow time window to execute the file (to have the USB port accessible ). After changing to SPL 1.56 Olinex phone booted with the old WM 6.1 stock. But i have changed 3 other roms after that, finally settling to energy Rom. With Olinex i had no problem at all flashing the Roms. I have even flashed a new radio, with absolutely no problem. Don't know what was the problem exactly, but the old SPL 1.54 had some serious issues !
I`m just glad i have revived this phone (witch btw, is not even mine)....
the old SPL, was locked lol. It's the stock SPL straight from HTC. But doesnt matter, good thing you solved your problem
10x
Wow, thanks alot for this post. I've done the same thing as you and crashed my HTC. Problem solved with Win XP, but more simple. Just executed USPL.exe and, job done. I think in Win7 was the problem with certified drivers. Think that can be solved in a fresh instalation of Win7 but not with certified microsoft drivers or HTC Sync installed. Anyways thanks alot. You've been a lifesaver.