Database Users

p3600i user please help urgently

At 1st I run onlipro hardspl1.1 for p3600i after that sync ur pda the will send u to the bootloader screen when install fail after that unpluck the pda and the restart the romupdateutility and last the HARDSPL successfully install inside.
WHEN GO INTO THE BOOTLOADER YOU WILL SAW
TRIN100
IPL-1.00
TRIN100
SPL-3.20.Olipro
After that using same method go bootloader upgrade the radio version 1.56.70.11 also install succesfully
While going to bot the ROM inside through bootloader then run update utility
once starting to upgrade the rom 1 % shown the the pda auto disconnect and error message 270 shown
wth is this problem i read tons of comment but it is totalli invain
is there a diffrence between using window xp sp2 , sp 3 and vista
HOPE SOME PRO can help me on this issue i test all the ROM also same 1 % auto disconnect
ORIGINAL HTC ROM
RUU_Trinity_DOPODASIA_WWE_3.00.707.17_6275_1.46.00.11_108_Ship
AFTER CHANGE
HARDSPL Olipro 3.20
Radio 1.56.70.11
ROM stil maintain the same offical rom no way to change please help =(

pola100 I flash spl 3.13.0000 and I cant anything flash,please I SOLVED IT :-) LOCK

Hi,
I have htc polaris (pola100)
but I unwillingly flash spl version 3.13.000 but now doesn't go anythink flash,
don't go flash anythink other spl version (1.25.0000, 1.28.0000)
Please anybody help me.

You had to flash the original ROM of your Polaris before flashing the Original SPL.
Can you get the tricolor screen?

I have original spl but after I flash hard-spl v2 and flash not original rom,but this rom was very bad.
So I would back my original wm6.1 rom htc, so i find original three original spl (1.25.0000 1.28.0000 3.13.0000) I flash spl 3.13.000 but now doesnt flash anythink anythink spl and anythink rom
please and now?
(ps: sorry my english is bad)

but yes a see my bootloader , i see red blue green and white color
on the left side is write:
POLA100
SPL-3.13.0000
CPLD-2
and the right side is write:
RUUNBH

okay, I understand.
Isn't there any ROM flashed?

i tried rom:
3LIT3_VI_Full
udK_Syrius_R7_WWE
c_shekhar_Pola_WM3.13.755CS_Build20755_Public_Final
and original rom htc wm6.1
But all roms frozen near 0% on htc display

I think you've bricket your phone

but on this list:
http://forum.xda-developers.com/showthread.php?t=351964&page=28
he have same problem as I.
mtelleria mtelleria is offline
Junior Member
Join Date: Jun 2008
Posts: 6
Default Problems installing HardSPL
Hi,
I have installed the last official version on WM6.1 on my htc, now i want to install one custom rom from this forum.
I tryed to istall first HardSPL, but i don't know why, the process get stuck at 0% of the istall and never continue.
In the 3 color screen appear:
POLA100
SPL-3.13.0000
CPLD-2
Someone can help me?
Thanks
____AND THIS ALSO BUT OTHER SPL:
he write:
"donchischotte" donchischotte is offline
Junior Member
On the screen I read:
-------------
RUUNBH
POLA100
SPL-1.28.0000
CPDL-2
--------------
Here is what I do and what happens when I try to use HARD-SPL V2:
1) I connect the USB cable and the writing on the device changes from "serial" to "USB"
2) I run romupdateutility
3) I check "I understand..." + next
4) I check "I completed..." + next
5) on the PC a message "verifying the information on your PDA phone, please wait" appears and after a while the device switches to a screen with a progress bar at 0%, while on the PC the following message appears:
--------------------------------------------------------------
Current information about your PDA phone:
Image version:
Select from below:
UPDATE Update the current ROM version
--------------------------------------------------------------
6) I click UPDATE and the following appears:
------------------------------------------------------------------
Verify that you want to update the ROM version:
From:
Image version:
To:
Image version: OliNex-2.20
------------------------------------------------------------------
7) I press "next" twice and I get the message "updating the ROM image on your PDA phone", but the progress bar is stuck at 0% and after a minute or so i get the ERROR[262] : UPDATE ERROR
I tried usinr both Vista and XP, with or without MicroSD and SIM card. It's always the same.
I tried flashing different SPLs (even the two original ones) with the same problem. If I try to flash a ROM I get the ERROR [294] : INVALID VENDER ID"
after 1% progress.
I HAVE SAME PROBLEM

I think you must wait Olipro or another chef here to say you how to refalsh SPL with 2.40 version in command line

You can try to flash you original ROM via SD-Card.

what is the solution ? I have the same problem with :
SPL-3.13.0000
I can't flash ...

Now its workhttp uff;-)
I flash my polaris 10* and all of a sudden work.

Unable to downgrade my SPL from 3.13 to 2.20

Hi there,
Hope you can help me...
Since i bought my Cruise, I flashed it to the newest ROM version of HTC and it automatically installed SPL 3.13 with.
The problem is that if I want to install the WM 6.5 rom, I have to "Downgrade" My SPL version from 3.13.0000 to 2.20.
I followed the steps explained by "Olipro", but when the upgrade starts, RUU kills activesync (seems to be normal) and when the phone normally reboots in bootloader mode (like when you flash a new rom), nothing happens. The phone didn't shutdown and tries to establish a new USB connection !
I tried to turn manually the phone in bootloader mode on to force the SPL update, but the % bar stays at 0 and RUU returns a communication error (262).
I tried also to install the wm 6.5 rom without install SPL 2.2, but it crashes (stays @ 0% too)
I don't know how to install this stinky version of HARD SPL.
Heeeellllpppp !!
NOTE : I tried with or without µSd, does the same thing.
Thx

hmm try disabling firewall and antivirus one of them may be blocking the connection. Thats my only thought about it.

Thank you for the answer but it don't work...

Nobody can help me ?

Try to extract the files from the newest htc rom to a new folder, and then copy the "RUU_Signed.nbh" from the SPL V2 folder to the extracted files (to the new folder) and run the "ROMUpdateUtility.exe" from the extracted files (from the new folder).

nope ...

Please, consider my asks...
I know there is necessarily a solution but I have not yet found.
I don't know where/why it is crashing.
What does the HTC need to downgrade the hardspl ?
Is there a protection that can't be bypassed with the 3.13 ?
The only thing that I can do atm, is flashing the official HTC rom (useless ^^).
The actual version of my rom is :
_HTC Touch Cruise_RUU_Polaris_HTC_FRA_3.13.406.0_radio_sign_25.85.30.07_1.59.42.15_Ship
Thanking you in advance...

Pixel69 said:
Please, consider my asks...
I know there is necessarily a solution but I have not yet found.
I don't know where/why it is crashing.
What does the HTC need to downgrade the hardspl ?
Is there a protection that can't be bypassed with the 3.13 ?
The only thing that I can do atm, is flashing the official HTC rom (useless ^^).
The actual version of my rom is :
_HTC Touch Cruise_RUU_Polaris_HTC_FRA_3.13.406.0_radio_sign_25.85.30.07_1.59.42.15_Ship
Thanking you in advance...
Click to expand...
Click to collapse
HSPL 3.13? In this ROM is ver. 3.13 drivers, not HSPL... If you have original ROM and you dont install Olipros HPSL, you have original HTC SPL...

When I enter bootloader mode, the HSPL version is : 3.13.0000
Of course it's the original htc HSPL.
The problem is that I can't downgrade it to the olipro's version : 2.20.

Did you try it on other PC?

2 PCs, 2 USB cables..
The official rom upgrade works fine, I dont think that the problem comes from the computer.

definite guide:
1. establish a connection with activesync via usb (orbit2 to pc)
2. start the romupdateutility provided in hardspl folder.
3. before it starts flashing, you need to also follow on-screen instructions on orbit2!!! execute jump-spl and stuff: click yes on orbit2!!
4. when the orbit2 states: Replug USB. you need to plug the usb-cable once off and then put it back to connect to your pc.
5. it starts flashing and restarts after its done.

Hi Manaaa,
I don't know what is jumpslp ??
I found it on the web (xda..), copied it in my "my documents" folder, ran it but it asks me a jump address (default is 0x00000000) and an spl (*nb) file..
What is jump spl ? What is the address to jump to? and where can I find the *nb file ?
In the olipro's hspl folder is only a *nbh file.
Thank you

I wouldn't recommend using a jump spl for our phones if there isn't one in the Hardspl Pack then one is not needed to be run.
Personally im still really confused by this so if i get it straight.
You are synced with activesync.
Run the file for Hardspl Run RomUpdateUtility.exe
Then go though. It switches off activesync.
Then what?? Exactly Does it ask you to replug the cable? Do you get the rom flash screen (with %) at all??
Also i dont think that spl flashes can be run from the booloader as it has to be a modded bootloader (jumpspl if you will), loaded by the program to be able to flash the new hardspl.
Also i know very little on this, this is as much as i understand it to be.

chris10230 said:
You are synced with activesync. OK
Run the file for Hardspl Run RomUpdateUtility.exe OK
Then go though. It switches off activesync. OK
Then what?? Exactly Does it ask you to replug the cable? NO
Do you get the rom flash screen (with %) at all?? NO
Click to expand...
Click to collapse
Normally, after killing activesync, the phone turns into bootloader mode. Mine stays in winCE and tries to establish new usb connection...
I also decided to force manually bootloader mode and killing activesync by myself.
I ran RUU again, it first checked the phone state (such as battery >50%, connectivity...)
CHECK : OK
Next step, by clicking "NEXT" on the RUU interface, the phone turns in "% mode" and the update starts but stays at 0%.
After a while, RUU returns an update error (such as 262).
Noway to flash hardSPL :'-( , v3.13 seems to be "write protected".

ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
Click to expand...
Click to collapse
That is what error 262 is but really dont see why this happens either. And since you can boot into windows its not much help.
So it just wont go to flash it when you click it through, hmm
Your last resort would be to PM cmonex as she will have helped make this with oilpro. Ask and see if she can shed some light on this one. Maybe something has gone wrong somewhere (quite likely) that we don't know how to fix.
Stupid question but have you tried downloading, unzipping it again? May have been a bad dl... or unzip

Have tested it with about 10# DLs...
I PM'd Olipro, waiting for a response now

Flash back to HardSPL and don't Re-Plug
Hi Pixel,
Herewith are guide for you
1) Flash back to HardSPL and don't re-plug until end of session (5 minutes)
2) Flash back to original SPL 3.13 on this post . This original SPL for HTC Touch Cruise only
3) After you do this you cannot flash with other Cooked ROM or Shipped ROM
with different ID, unless you flash back to HardSPL
Good Luck my friend

I have exactely in the same configuration as Pixel69 with the same result.
I've tried to an other PC without any change.
Has somebody any idea?

Just had an idea what OS are you running to do it?
If its not 7 may not be fully compatible... Shot in the dark really

Artemis problems with USPL

Hello guys, I've got a p3300 which I can't update to a WM 6.1. It's the factory's 6.0. It's originally simfree so I dunno if I need to go through the USPL.
The thing is that it gives me 270 Corrupted image error.
As I thought that being simfree originally, didn't need to do CID unlock, I tried to flash a cooked ROM with no success whatsoever.
Any ideas?
Kind regards,
JamworkS.

DONT try to install any rom untill you flash ''uspl cmon''!
you might brick the O2xdaOrbit/p3300!!
* put the two cab files on your device and run them.
* get activesync connection
* run dos window
* soft reset after 100% to get activesync connection.
- only when the rom update utility window opened on pc..
* uspl cmon rom update utility.
***ONLY after doing uspl is it safe to flash a rom.
* if you have an SD card in the device, take it out..
when you have done uspl on your device startup you will see..
SPL: 1.11.cmon
* its done.
USPL 1.11.CMON
http://forum.xda-developers.com/attachment.php?attachmentid=41246&d=1181558635
message me if you get stuck..

Having problems with this.
For 2 days I try all the files and ways to set 1.11.cmon on my P3300 and always stuck at one place no matter what versions of the program I get.
IPL 3.07.0001
SPL 1.11.0000
GSM 02.98.90
OS 3.13.0.0
are the red numbers I see when I restart it.
The problems are that when connect phone and see connected on ActiveSync I start start_uspl program. After 100% connection with Active Sync dissapears and I see black screen on my PPC, then I run ROMUpdateUtility and It says some error that there is no phone connected.
If I start ROMUpdateUtility before start_uspl I go in to boot loader mode ( the 3 colors screen ) and then again that there is no phone connected.
I have done this 15 times or more with different versions of the program and it stucks on the same places ALL the time no matter what version I use.
My artemis had 1.11.cmon before, but I installed the LAST Artemis P3300 ROM from the WIKI. That removed the 1.11.cmon from the phone. After that I have Installed Vanilla 2.0 WWE version on the phone and started the process to set 1.11.cmon on the phone. No success. After some 6.5.5 ROM from the forum, then process to set 1.11.cmon and again nothing...
Please HELP!

i am also having the exact same problem with this , have tried everything to get this to work.

iant2008 mate I did solve the problem
All works as the brains here say. My problem was that I am using Windows 7 at home and Windows Vista at other place I did try to fix this problem. However with Windows XP this whole operation works properly as the people here say. Big thanks to them and I hope you success in this operation too

raving_nanza said:
DONT try to install any rom untill you flash ''uspl cmon''!
you might brick the O2xdaOrbit/p3300!!
* put the two cab files on your device and run them.
- Cert_SPCS
- EnableRapi
* get activesync connection
* run dos window
* soft reset after 100% to get activesync connection.
- only when the rom update utility window opened on pc..
* uspl cmon rom update utility.
***ONLY after doing uspl is it safe to flash a rom.
* if you have an SD card in the device, take it out..
when you have done uspl on your device startup you will see..
SPL: 1.11.cmon
* its done.
USPL 1.11.CMON
http://forum.xda-developers.com/attachment.php?attachmentid=41246&d=1181558635
message me if you get stuck..
Click to expand...
Click to collapse
* soft reset after 100% when the rom update utility window opened on pc..
''to get activesync connection''
it should work dude

Dear Friends,
After USPL the screen of Artemis becomes white and running RUU ends up with error 266. And even after a soft reset running RUU ends until 3% after that comes error 270.
Any solution will be highly appreciated.
Thanks and regards,
Sameeha

...
sameeha said:
Dear Friends,
After USPL the screen of Artemis becomes white and running RUU ends up with error 266. And even after a soft reset running RUU ends until 3% after that comes error 270.
Any solution will be highly appreciated.
Thanks and regards,
Sameeha
Click to expand...
Click to collapse
put the 2cabs on your device and run them..
rapi & cert
run_startuspl - on pc
when this is 100% - soft reset device
-now continue to do rom update utility (uspl ruu)
this should work..?

Hi, raving-nanza,
Thank you very much for your advise. I did that too but nothing happened, error 270 again. errrr? very irritating dude? Any other solution?
Cheers,
Sameeha

...
sameeha said:
Hi, raving-nanza,
Thank you very much for your advise. I did that too but nothing happened, error 270 again. errrr? very irritating dude? Any other solution?
Cheers,
Sameeha
Click to expand...
Click to collapse
i have to admit, i had same trouble to do uspl1.11cmon but eventually it worked.. frustrating.. i know.. but keep trying.. if i was you i would flash back to the official rom.. which should get rid of 1.11.0000 and set back to original spl..
i put rapi and cert on my device, ran them, connected to pc, ran ''run_startuspl'' that made penguin on screen on device.. went to 100% then white screen.. Ruu automaticly opened on pc but i didnt continue with Ruu.. i soft reset device, got activesync connection again and then i continued with the open Ruu..
(Ruu - rom update utility)

Thanks RN, you know, I was trying all this time and my Artemis frozen now (freezes on startup screen IPL 1.25.0001 / SPL 1.27.0000 / GSM 02.69.90 / OS 3.4.0.0. and dopod logo) not moving further. Whats going on? Can you help me?!
Cheers,
Sameeha

...
add me to messenger..
will be much easier than posting

i'm an idiot.....
see this thread
http://forum.xda-developers.com/showthread.php?t=578406
if you run a 3.13 rom; get the 3.13 cmon
if you run a 3.15 rom; get a 3.15.com.
pof's original (kickass great work!!) didn't work with my 3.13 (original htc rom); i ended up with 1.11.000spl. i then ran the 3.13 uspl (see thread); now i am on cmon version

[q] stuck in bootloader. Help needed.

have a HTC Athena x7500.
Im stuck in bootloader.
Wend I power on the device it goes directly to bootloader and
the screen say :
ET \ Njq
IPL - v1.00
ET \ Njq
SPL- v1.20. Olipro
USB( wend is connect )
serial ( wend is unconnect )
I dont remember what it was befor I try to flash a WM 6.5 rom on it.
It as a WM 6.1 in Portuguese Rom befor my attent.
I cannot power off the device by pressing the button but have to take
the battery.
I already try to change the rom, the SPl and put everything inside just
to try to move from were I am but no results.
Began to update but ends or in 1% or in 7% and loose the connection.
The device connects to the PC but in PC in WM device center nothing happens.
I try Win7 and also XP.
I went to HTC site to download the official portuguese ROM but there are no
ROM to download.
So I´m dead on the water.
I will apreciate very much any kind of input that take me out
of were I´m now.
I´m not a expert as you already notice.Please keep it simple.
Thank you

stuck in bootloader. Help needed.
stuck in bootloader. Help needed.
have a HTC Athena x7500.
Wend I turn on the device, it goes directly to bootloader and
the screen is:
ATHE 100
IPL - v1.00
ATHE 100
SPL-v3.05.0000 OR my old spl spstuck in bootloader. Help needed.l is 1.10
I have tried to change the language of my athena and then he died :spanish > fransh
USB (wend is to connect)
series (wend is unconnectable).
I can not turn the unit off by pressing the button, but must take
the battery.
I have tried with hardspl its not working
I want a solution in the forum xda-develop it says my q must upgrade to the rom of espana oficial
After downloading the rom:Advantage_HTC_SPA_2.21.412.1_1.50.00.00_Ship
I tried to upgrade to this rom May j has a mesage on my athena screen:
found spl v1.10
dowload Spl before v3.05 is not allowed!
I tried to update it with the sd card i have the same mesage
upgrade with athenaUnlucker not work
upgrade with hardspl v7 not work
upgrade with CheetahUnlocker not work
upgrade with athena wraper not work
J have explored ruu_signeg.nbh with notepad jai entered the signer spl 1.10 I know if c is vrait or name
I believe there is a problem in the image rom saved in my athena rom
what I see on the screen of my athena is the spl 3.05.0000
The real spl is 1.10.0000 there is confusion in my spl
is what I can fix this problem with mtty
so if possible please guide me
sorry for my bad Englis
thank you in advance
My email: [email protected]