Related
Hello All
Help please! I start to use this gadget week ago. And I is not so easy. I though, that if this gadget has name "touch", I will be able to operate it with using my finger. But I have to use my NAIL for it. I have used all tools (setting of register, additional programms and etc) for setting my device, but it was unsuccessful
If you have any secret tool, share with me!
Thanks in advance.
Rsmile said:
Hello All
Help please! I start to use this gadget week ago. And I is not so easy. I though, that if this gadget has name "touch", I will be able to operate it with using my finger. But I have to use my NAIL for it. I have used all tools (setting of register, additional programms and etc) for setting my device, but it was unsuccessful
If you have any secret tool, share with me!
Thanks in advance.
Click to expand...
Click to collapse
Your device should be working allright right out of the box. Should not have that much difficulty - however, check out this link for information on touch sensitivity
http://wiki.xda-developers.com/index.php?pagename=Touch_Sensitivity
If this does not work, then perhaps you have a crappy screen protector on - take it off and see how it works without it.
You have been playing with the registry you say. Have you been doing this before or after experiencing the problems. You might have messed things up unknowingly. A hard reset should reset things back to factory default settings - perhaps this would fix your problem aslo.
If that does not work - you might want to consider taking it back to the vendor for a warranty repair or replacement as it could be a faulty digitizer.
Good luck, hope this helps
EDIT: If you don't have warranty and you believe it may be a faulty digitizer see here for instructions on how to dissasemble your Elf to replace digitizer yourself - It may not be this but it is difficult to know.
http://forum.xda-developers.com/showthread.php?t=407323
I am assuming you have not flashed a new ROM to your device because otherwise you should have said so. If you did by chance and not mention it, it could be a problem with the ROM and you might want to consider flashing to a different custom ROM. If it is Stock ROM still and none of the above helped- than ignore this as flashing to a new ROM will not likely solve the problem as I suspect it is a faulty digitizer.
Gday all.. Think I have received a clone of a HTC T3232 from ebay, its even in HTC covers, how bad's that! (dispute in progress).
It does not respond to the HTC reset method (volume down & enter while switched off, and the small reset button at same time) so I can only presume its a clone.
Anyway the main problem is screen calibration, its out by miles, I cant even use the slide bar down the right hand side of screen.. I have done the calibration about 20 times via display settings and it does not help, the best reset I can do is via the clear memory tab in settings, that didnt fix it either.. Im not sure what its issue is, cant even figure out what sort of phone these "ripoff merchants" have sent me..
Any help would be much appreciated & thanks for reading my post
matt47 said:
Gday all.. Think I have received a clone of a HTC T3232 from ebay, its even in HTC covers, how bad's that! (dispute in progress).
It does not respond to the HTC reset method (volume down & enter while switched off, and the small reset button at same time) so I can only presume its a clone.
Anyway the main problem is screen calibration, its out by miles, I cant even use the slide bar down the right hand side of screen.. I have done the calibration about 20 times via display settings and it does not help, the best reset I can do is via the clear memory tab in settings, that didnt fix it either.. Im not sure what its issue is, cant even figure out what sort of phone these "ripoff merchants" have sent me..
Any help would be much appreciated & thanks for reading my post
Click to expand...
Click to collapse
I think (and I could be wrong) that its volume down and enter then the power button for the touch 3g.
yes I tried that to, doesnt seem to work.. this is why im wondering if this thing is a HTY or something similar to a HTC, in HTC covers.. quite a letdown ..
the digitizer is miles out of wack .. is there a chance this is a rom issue or would the touch pad its self be shot ?
I've read somewhere about a clone having a different brand processor, check your system information:
start -> settings -> hardware
The real thing has the qualcomm 7225
Try to download an official rom update from the htc website. You will have to enter the serial-number of your device. If they deliver the download to your pc, you can be pretty sure it is not a fake one...
Is it not vol+ vol- and the power button all at the same time for hard reset?
Ok thanks guys, getting somewhere but its not all good, it has a Marvell pxa300 624MHZ CPU
one of the first things I tried a few days ago was updates from the HTC site, and it did NOT accept my serial number, so I think its a clone for sure. so my question is, will origional HTC software work on this clone if I download it from this site, OR will it not work because of the different processor ?
Should I even bother flashing the ROM as the opsys seems to be working fine, just the digitizer is out by miles, I ran DigItest last night and the screen was not always responding in the correct spot, correct maybe 50% of the time and the other 50% of the time it was miles out. almost NOnresponsive around the edges of the digitizer.
The seller I got it from also sells digitizers for this model lol.. I have to wonder if he didnt try to repair this phone from new, maybe a factory second or something ..
So guys whatya think?, flash rom, or grab a new digitizer from the 3bay ?
You got a clone for sure. But if you have buy it for less money i think its obvious its a clone. I got a clone too but i'm very happy with mine. No hardware issues for now, only some hard resets. I think you cant put a original ROM on a clone or can you? Btw in the phone info if for the model you got T3238 then you can be 101% sure its a clone
P.S. Btw the clone dont have build in GPS.
ok, yeah its t3238.. im prety sure it has inbuilt gps, they a$$ured me it did, but anthings possible im yet to test it coz the digitizer screens annoying me to much, dont want to even attempt to try and use it until I fix it.
Dont think the HTC rom works but im not 100% sure, im not used to these phones & there ways yet, still pretty much learning !
well, did you buy a clone or did you buy the real tough 3g? what did the presentation look like? i mean if the presentation lied to you, you did not pay money for the clone but for the real thing. then you might be able to redo the contract with the seller... maybe... good luck!
found the clone!
http://www.cectunlocked.com/OEM-HTC-Touch-3238-3232-Quad-Band-Phone-with-Windows-Mobile-6.1-WiFi-GPS.html
well...
ahh its a spitting image of a HTC, its in HTC covers, with HTC written all over it, apart from one spot I found inside the rear cover its clearly marked HTY.
The seller I used on 3bay told me it was a HTC not a clone, his discription was very deceiving. The phone turned up in a HTC box, with a HTC disc & HTC instructions, batterys and all other accessories INCLUDING THE BOX lol are all origional HTC products, apart from the phone its self! .. the phones a cheap ripoff - in a HTC box. go figure..
Still wondering if it needs a digitizer or the rom flashed..
I've also recently received a 3238 model which i believe to be cloned. It's in Chinese and i want to flash it to English but am unable to perform a HardSpl. If i hold down volume and press the on button i just get a screen that says ''USB update mode'' nothing happens if i try to run v4.1. If i try to run a new ROM i get error [206] unable to connect. Anyone have any ideas on how to get an English ROM onto it? Any advice would be much appreciated!
thers a seller on ebay that has the english rom for them, but he wont share
otherwise i dunno, HTC need to sue them
he did tell me its "over 60mb" .. i couldnt find it, getting really sick of the site of chinese to english translations! lol..
.. im going to buy a case of bourbon - stuff this phone, I hate it
.. LOL !!
IT WASNT MENT TO BE THIS WAY
matt47 said:
The seller I used on 3bay told me it was a HTC not a clone...
Click to expand...
Click to collapse
So! There is the fact! He did not give you what you have bought! He did not fullfil the contract! Give him a deadline to send you a proper HTC Touch 3G, afterwards cancel the contract, get the money back and get a proper one by amazon or some other good store.
Next time when buying a clone, do it directly here http://www.china-phone.org/ or check here for nice clones http://www.clonedinchina.com/.
Loool! I think the fake HTC 3G has an even more powerful CPU then the real one !?
Can that be?
624MHz vs. 528 MHz - I'm not too familiar with cell phone CPUs but 96 more
fake real
I'm glad I read this thread. I'm looking for a Jade, saw a T3232 that was a good price on ebay, then spotted it had dual sim
HI 79, there is no contract I bought it outright, a damaged claim is in progress so effectively this phone wont cost me anything , hopefully Now i just have to save the phone from the bin !!!
DUAL SIM ? .. This clone does nOt have dual sim, its exactly the same layout as a HTC 3G .. very hard to pick from a HTC inless you have seen a HTC before, you wouldnt really spot the difference..
I think mine may have a faulty digitizer, Not the Rom.. Whos with me on that ?.. As the digitizers not to expensive and the jobs not that hard, im thinking of giving it a go, could be easier than trying to find the rom ?..
U guys/gals think its worth a try or should I wait until the roms up and try that first ?
jiga man said:
I've also recently received a 3238 model which i believe to be cloned. It's in Chinese and i want to flash it to English but am unable to perform a HardSpl. If i hold down volume and press the on button i just get a screen that says ''USB update mode'' nothing happens if i try to run v4.1. If i try to run a new ROM i get error [206] unable to connect. Anyone have any ideas on how to get an English ROM onto it? Any advice would be much appreciated!
Click to expand...
Click to collapse
I cant even get to that screen with that method so im wondering if either your clones different to mine, OR maybe yours is a proper one ?.
Does it have HTY in small letters on the inside of the the back cover by any chance ?
It doesn't say HTY anywhere on the phone but if i run my finger over the HTC part of the lettering on the battery it is slightly raised, seems they've craftily painted over the original lettering. I've compared the phone to a real one and it is slightly bigger in size. The phone actually works really well, don't have any issues with it, just want to get it into English!!
I just went on ebay to check the prices on the Jade. The ones that are $200 are obviously clones. The real ones are atleast 350+. I was able to get mine for 320 with the 8% from live checkout
i have a mda vario 2 ( hermes) i've been installed a rom called hermes_wwe_3.62 Malina2d now phone boots up fine but the touch screen dose not work at all ! can anyone help ? .
To get pass the alignment screen i had to create a file on storage card " welcome.not" and that got me pass alignment screen.
now i am a newbie so please all the help would be appreciated i did have a look for file called touch.dll to replace it but could find one. ( as i read somewhere that might be the problem.
my ipl -1.04 & spl-2.10.01ipro
i really don't know what to do i have tried to re flash the rom no luck there.
all the hardware buttons work fine.
Not sure about that one. Why not post the question in the thread from where you got the rom? That name doesn't ring a bell.
If not try flashing the stock shipped rom, or the at&t stripped to see if the issue goes away. If it does go away, then don't use that rom.
cant really remember where i got the rom from as i the phone is my little sisters. do you have a link for the rom you suggested
My sig has the stripped rom, and the shipped at&t roms. You can also find some programs and my roms there too.
And to be safe make sure that hardspl is installed.
If that doesn't fix it, there might be a hardware issue.
cheers for your help. i am going to download one of your roms and pray that might resolve the issue . what the latest hardspl ? i thought 2.10 was the latest ? how do i tell what is the on i have installed on the phone ? Hardspl and spl are they the same thing ?
If you flash one of mine, flash the at&t rom first, that will straighten out any issues with the memory.
if you have 2.10olipro, your all set! spl (or hardspl) is the bootloader.
no luck still having issue with the touch screen wont wont work.
the touch screen used to work fine before. all this it just became very laggy so i decided to upgrade the rom , i went to thru a few roms.
any other idea ?
i must say i do love your rom everything is set out all nice and neatly shame the touch isn't working.
Thanks for the compliment on the rom!
Sounds like it has some kind of hardware issue. If your inclined to take it apart carefully (I haven't taken mine apart yet), you might be able to check all of the connections, and for dirt or anything that might be the issue.
I believe there are disassemble instructions on the wiki.
Maybe someone with more experience in taking the phone apart can chime in.
touchscreen issue
i m having the stupid touchscreen issue i have tried everything ( including disassembly and removing gasket but it still does not calibrate
starting to hate that phone
Sounds like Digitizer could be dead.... Need to replace the LCD and Digitizer if thats the case.
The trouble with this is there are a few different things that could be causing this and just replacing the LCD might not fix it.
Sounds like it could be though. If you are having trouble, DON'T do a hard reset until you have installed an app called "remote screen alignment", freeware off the net. It copies the alignment info to the PC so you can do a quick alignment using the PC instead of the buggered screen. Otherwise you'll be going in circles for ever without being able to get into the today screen.
Cheers...
actually i have hard reset the device
the trick is to put a file called welcome.not on memory card to skip first time alignment
i'll change screen and see if it fixes itself later
i ll use the phone as it is till then
new lcd
i changed the lcd it worked flawlessly for 3 weeks then bang! the bottom half of the lcd stop to work
i think that the ribbon on the lcd got damaged when i installed it on the hermes the fact that it needs to be turned 360 degrees during assembly cause the problem any thoughts from you guys????
Alright...so here goes. I have been out of the smartphone market for some time now and am getting this awesome phone tomorrow. I am friggin excited! Feels like Christmas in the summer! Verizon tells me that it will already come with the 6.1 update installed. Anyone gotten one recently to verify this, and how do I tell when I get it...also how can I tell the radio that it has? I also already wanna mod this machine, and although I am selfproclaimed computer savvy, I am a little nervous about bricking the phone. I think I def want either an iCRAP setup to piss off everyone at work, or nfsfans 6.5....although I would like to have someone walk me through it. I have to say, everyone on this forum has done an excellent job with their machines and I am impressed. Also, I don't know that this will even be an issue, but it will still need to function as a phone and pda...as I have read in a few different places that some cant use their phone function anymore, etc. And I definitely wanna get the GPS running ASAP, due to travel on the job. Any help will be greatly appreciated, and I will def help out anyone on here if I can. I also am not sure about when and when not to let customizations run...any help with that would be awesome too
i am also getting this phone from vzw thursday, they told me it comes standard with wm6.0 idk or care. as soon as i get it im gonna flash a custom rom.
Hey there, I'm a fellow Verizon user. It was kind of nerve-wracking flashing the ROM for the first time, but its really NBD once you get into it (be sure and try android too!).
Do your reading first, there are tutorials all over the place. Something to remember about customizations - Don't let them run on any official Verizon updates you see floating around the internet, as they will cripple your GPS. Don't let them run on any ROM designed for another carrier. If you're flashing a generic or Verizon-specific CUSTOM ROM, let them run.
And you can check in settings to see your radio and OS version and all that (under "about" I think, correct me if I'm wrong)
Have fun!
so if i run mr1 from verizon to get to wm6.1, then I SHOULD NOT not run customizations. What buttons do I press to do a hard reset before that comes up? But, if I were to do NFSFAN's 6.5 rom, then I SHOULD let customizations run. Also, could someone point me to a set of CLEAR directions on doing the flashes? I have read a bunch of them, and it seems they are all missing little parts.....probably something so familiar to the editor, they just forget to include in the steps.
Yes, the lack of CLEAR instructions as a stickey is a real problem on a lot of boards. I've read threads over 300 posts in order to get solid info. I don't mind searching for info, but jeesh, guys it is unbearable. Granted some of this stuff is not for the faint of heart, but there can be so much info, and sometimes it is often confusing and contradictory. The SR. members and the Admins need to get their heads together and take a month to provide the community some solid resources, and weed out some of the erroneous info here. We want to make having this phone FUN and Practical. A Case in point is trying to get GPS working. Have you guys looked at all the info on here about this. Granted there is variety of carriers, but it shouldn't be brain surgery.
Also chevyspd,you want to do a SOFT reset before the customizations. Use your stylus to depress the small hole in the bottom of the phone before they run. Should be golden. A HARD reset will restart the flashing process from scratch.
10-4....so only do a soft reset by only pressing the button in the hole on the bottom before customizations runs. That is very contradictory from about 50 other posts I've read so far. A whole bunch of them say to do a HARD reset, but I will remember not to. But, when I do a custom rom like NFSFANS, I don't have to do a reset at all....correct?
You wouldn't believe how many times I got flamed for that same kinda comment on other forums.....interestingly though....Also...if I flash to NFSFANs 6.5, are the cubes still active, or is that something from HTC that gets written over with a new rom?
So, my new phone already has 6.1 right outta the box. Interestingly enough, it went to the customizations screen as soon as I powered the phone up, so I immediately hit the soft reset. How can I tell if what I did worked, and if it didn't, how can I fix it so I can use 3rd party gps programs?
Wow; a lot of questions. I'm not sure about NFSFAN's rom. To see if the gps works, make sure you have the Settings>phone>services>location is set to on. Then make sure the external gps setting is set to Comm4, then hardware NONE, baud 4800, and allow Windows to manage gps. Do a Google search for HTC QuickGPS if it's not already on your phone (varies from carrier to carrier) and Install it; Run it, outside and allow it 10 minutes to get a lock. If gps is working, then you should be golden. You will probably need to turn the radio on after every re-boot; and be aware that leaving the radio going WILL drain you battery faster than usual. All this assumes you are using the stock rom, and not one of the custom ones; each to those varies, some work out of the box so to speak, some of them require tweaking.
Funny i just got the phone yesterday to, but i actually already had it for about a year lol, just replaced the one i broke on saturday. But honestly the first thing i did with the phone is put in my SD card and boot up Android....
I really want my GPS back again but i dont really want to go through the hassle of unlocking, flashing, unlocking, and flashing, but if you deem it neccessary. and maybe i will to one day soon. lol heres the link
http://wiki.ppchaven.com/index.php?title=Pocket_PC_WIki:FIX_VERIZON_GPS
chevyspd said:
You wouldn't believe how many times I got flamed for that same kinda comment on other forums.....interestingly though....Also...if I flash to NFSFANs 6.5, are the cubes still active, or is that something from HTC that gets written over with a new rom?
Click to expand...
Click to collapse
The cube is way back when man, sorry but those things are old school already. lol so when you flash to the 6.5 NFSFAN rom it will not have the cube, but it will have titanium and manilla 2d, which in my opinion are awesome replacements
chevyspd said:
But, if I were to do NFSFAN's 6.5 rom, then I SHOULD let customizations run?
Click to expand...
Click to collapse
Yes, and remember to install the Verizon cab in his post :thumbsup:
Well, the phone didn't come with the cube anyways...lol...so anywho...I think the GPS is working anyways...just gotta find a free GPS like vznavi or something.
Hi everyone,
Since yesterday my touch hd stopped working! It seems like the touchschreen is not working anymore. Only the power en volume buttons are working.
Because of this I tried to do a hard reset which resulted in the same problem. Now I'm stucked on the align screen. If I press really really hard I can align 3 corners of the 4 on the screen, so I can't get further to the next step.
Im currently in a hot hot Australia which might be the reason for all this. If you have a good look at the screen while turning it horizontally, you can see that one part has weird colours/reflection.
So what do you think? Can I buy a new screen and solve the problem or is there more going on?
Can I have warranty? The device is not having the stock rom on it. Can I maybe control the device and install the stock rom on it using a program on a pc or so?
Aaaaaaany help would be so appreciated! Im using the device as tomtom GPS as well, which I really need to travel to Melbourne next week. So I kinda need your help/advise cause I'm a bit in a hurry....
Thank you very much anyways!
Pauwel
Hi
Do a search on "newton rings" which I believe is the weird color / reflection problem.
As an aside when I knew I was getting a replacement I saw a post that suggested putting the phone in freezer for 10 minutes or so !
I did then wrapped it in tissue to absorb the condensation and it worked !!
r
Andrew
Plenty of threads on Newton rings if you search the General Forum like this one.
If its not Newton ring I you want to get past alignment, one method is to skip or bypass the alignment process altogether. Some Chefs do this already, namely Dutty, to among other things speed up the set up process.
How to do it: there are a couple of ways you can find in the forum, however, one way is to create a blank text file called, welcome.not, instead of welcome.not.txt, and place it in the root of your storage card. Next, flash a new rom or hard reset and you're done. It's up to you whether you leave your SD in during flash. I do not. If you do not, after the rom flash, stick your SD in and hard reset. If all goes to plan, the "welcome" phase will be bypassed, any you will not be prompted to align the screen or set the date, location, time etc. If for some reason it does not, go into the root of your SD and manually with your stylus or via activesync on your desktop create a new blank file in there and name it welcome.not. That actually worked for me. If it works then leave it in the root of your SD and it will allow the bypass with each new flash or hard reset.
The screen coordinates should load automatically after the bypass. If for any reason you need them, here are the Blackstone alignment coordinates from HKLM/Hardware/Devicemap/Touch/ Calibrationdata:
511,542 183,881 183,198 834,197 883,880.
Had that problem and you need a new ditigiter. Only problem is you will most likely break the screen replacing the ditigizer. So, the only fix is a new LCD screen and digitizer. You can get them from ebay. I did it and it was pretty easy, just take your time and get the videos and manuals people have posted on here. Good luck.