I flashed an Elf yesterday with an original HTC Rom (german). In the beginning all worked fine, after flashing and restart it showed the HTC screen, all in german, and said: no Sim. ihad removed the Sim and SD Card before flashing. So I switched off the device, put back Sim and wanted to start. right now the device doesn`t boot any more. It just shows a T-Mobile Screen for about 10 sec and than goes off. I Tried the recover Rom from sniper911 (HTC Test ROM), but the device doesn`t start in bootloader Modus. I can`t access the bootloader modus. What to do????
charge your battery and try hard reset
Related
Hi,
I have a big problem, i when i started my SPV M650 (Orange phone) 2 days ago it didn't want to start (blocked on orange splash screen) so i made a hard reset and it was working.as i didn't want to keep orange OS i tried to flash it.
As a newbie, i tried to flash it with a HTC Rom without unlocking the CID. and..... didn't work !
Retry : updater says no system at all was installed on the phone then, it had passed by and installed the rom (don't know why)
yap, installed but didn't work! still blocked on splash screen sometimes go on WM6 welcome screen and one time accessed the Windows Mobile.
And one hour later.... black screen !
So, i tried to reflash it in bootloader mode with the original orange ROM, it worked, but still blocked on the orange splash screen and the OS version written on this screen was 1.84.0.0 (it should be 1.84.73.2) and screen was brightening so reflash a second time with that original rom, error 276: update error. Now everytime i start the phone, it is in bootloader mode with RUU written on it (in update process i suppose) and everytime i retry to update, error 276: update error. then tried with SD card: card no recognized and still blocked on the bootloader mode update process.
So,
- is there a way to update or flash the bootloader ?
- has my phone his hardware totally crashed
(because i think orange won't never accept warranty, even in normal way they only accept it when you are dying front of their door, and its not sure if they could kill you just for pleasure they'll do)
alright.. i made a similar post to this before and i came across the wiki...
well i can't view what my SPL or my IPL because as soon as i turn the device on, all that shows is the boot loader screen and displays serial on the top with 0.16-0.90 in red characters on the bottom (I'm not sure what those are)...
here are the only details that i know about my phone:
I DON'T have hard SPL
My Original ROM i was using before was an htc windows mobile 5 rom
The reason that my phone is bricked right now is because the usb cable disconnected in the middle of the flash
I'm using Windows Vista for flashing
Computer won't recognize the phone when on usb
My phone (qtek 9600) can't load the operating system
*EDIT*
THE PHONE IS STUCK ON BOOTLOADER WHEN I TURN IT ON, NOTHING ELSE, BUT THE BOOTLOADER SCRREN DOESN'T SHOW MY SPL AT ALL.
ALSO, MY COMPUTER DOESN'T RECOGNIZE THE PHONE....... MY PHONE HAS A TYPE 2A BRICK
Helping me will be greatly appreciated
come on.. I'm without a phone
Do you have a 2GB or smaller SD card? Copy a rom image to it and rename it HERMIMG.NBH
Turn it on and you might get lucky!
Just make sure its stock rom that was supplied, or the updated WM06 version as the CID should check out then...
vwkess forgot to mention, reset into bootloader, hold power, ok button and reset with stylus. Hold all buttons in until you get to the tri-colour screen. If it works, follow the prompts....
Cheers...
hi,
i think i can hlep.
i had recently bricked my phone with a custom wm6 image, it worked fine for two days and then i reboot, and all i see was the welcome image, nothing else.
so what i did is -
i pressed the hard reset buttons - power + OK + SOFT RESET (Stylus), kept it pressed for 3-4 seconds, the fone rebooted, the screen was full with some colored bricks i connected my fone in USB and on screen i saw USB.
I then again flashed my fone with the working update, it worked perfectly for me, try may be you can get some luck
ps - before doing all these, i turned my fone off by removing the battery, i removed sim card and mmc card as well.
regards
That may work too, but again, try to flash with a stock rom, untick "connect with USB" in activesync and then try.
Make sure you go to boootloader screen, instruction in rajivlodha's post, before you connect to the pc.
Goodluck...
I need some help as well.
I think I may have bricked my phone. It's a rooted htc hero cdma. I'm running cyogenmod on it and it was working fine, until using metamorph to apply some changes to the theme.
I went to reboot, and it now it won't load past the htc screen. Even when i try the key combination to put it into recover mode. I didn't install a nandroid backup, and i'd be fine with just completely wiping my phone. help is appreciated.
hello,i got a problem i tried to flash few roms and after when i tried them they were hanging up,so i downloaded another and i couldn't turn the phone several times but somehow it worked and turn on so,i was putting it on device by RUU and in 48% it stopped and show error message and after 4 steps i've done them and disconnected phone from pc,taken battery out that was in these steps and after when now i am trying to do a hard reset or soft reset it sometimes doesn't turn on and sometimes goes to bootloader that only what it's doing, i can't even do hard reset because it goes everytime to bootloader, i don't have idea what to do so please help me,is any way to flash rom without RUU?
Have you CID unlocked the phone already with USPL or HSPL? That would be the first step, and might be the problem.
i think i done,because in bootloader it says SPL 2.26.0000
yes, u can flash without RUU. rename ur rom file to ELF0IMG.nbh and put it in the root of ur sd card (formated in fat32).
so,that what i done i putted the sd card to nokia made usb connection between pc with xp and nokia transferred the rom on the sd card,unplugged nokia,token out card putted it to elfin and hold power button and it get me first to searching SD card communicate and after to bootloader and nothing happens, i leave it for couple of minutes on searching sd card communicate and nothing than happens i changed it to FAT32, the elfin is from orange uk.
PLEASE HELP ME!!!!!
NOW when i put the sd card in and keep camera and power buttons it get me to message "update sd image?" and "press power key to start download" but in this time it getting blinking and few seconds after screen go white,i am trying to press power but nothing happens appart turning screen into white PLEASE HELP ME UNBRICK MY PHONE.
hello,
since yesterday I cannot boot my X1 anymore.
Rebooting starts, then I get the screen where I have to enter a security code (thanks to my company`s security policies...) and I cannot enter values there. After a few seconds it stops booting. So I cannot proceed
Only option I see is to reinstall ROM/firmware.
My laptop cannot see the X1 via USB because it is not up and running, so I cannot move data/new ROM to the microSD.
Is there a Software/firmware/ROM-updates available (prefered: WM6.5 German, or at least WM6.1) which can be started/run from my laptop?
I couldnt find a download link to VodafoneGerman WM6.1 here
http://wiki.xda-developers.com/index.php?pagename=HTC_Kovsky_Shipped_Roms
thank you
Raggi
If you have soft SPL, you should be able to get into boot logger screen and update it thru the SE site/program.
Other option.. is there a card reader/adapter that fits the micro SD card for you to copy the ROM?
Edit: Does hard reset work at all?
hard reset doesnt work unfortunately.
Dont have soft SPL installed
my cardreader doesnt support microSD, so I guess I first have to buy a new one
is this the latest official Vodafone Germany WM61 ROM?
GENERIC deutsch DE (1.03.938.9) R2AA006
http://forum.xda-developers.com/showthread.php?t=477801
Now I called Vodafone Business SUpport and they dont have a link for me....
Try the following:
Enter bootloader (press the silver buttons and on/off button when phone is off)
Use SonyEricsson's update program.
IMHO it should update as the phone connects to usb with different mode than normally.
great, a few hours later and got it working.
I went into town and but a new cardreader. in the meantime my X1 woke up
and I could use the SE update installer.
So now I have got a newer WM6.1 (ROM 1.03.162.10, radio 1.10.25.18) running which is so much faster than my old system
now time to enjoy the sun....
Strange, almost the same thing happened to me on that very day... Phone stopped booting after the SE logo (Animation didn't show up). Had to Hardreset after several attempts to solve the problem...
Hello there magicians.
My poor Artemis is in trouble.
After an upgrade to a new rom (Artemis touch 4.02) and when everything went perfecty well, I tried to put greek in it. After reseting the device starts but stucks in the screen before opening WM 6.1
HELP!!!
How to enter it in bootloader?
shut down ur phone by removing the battery then again put in the battery then press the record button and the power button together u will see the red blue screen this is boot loader mode flash it with official factory rom this is important and dont forget to remove ur sim and memory card before flashing
Thanxxxxxxxxxx
A lot
And now what I ll do about greek keyboard?