update rom SPV_M3100_ROMUpdate_0407 stop %20 only windows screen how to repair? error 294 invalid vender id hard reset dont work
IPL 1.01 SPL 1.09 please help me thnx all sorry bad english
I'd start by reading the Hermes Wiki which has all sorts of fixes for common problems during upgrading.
The Vender ID bit of the error suggests you have used the wrong ROM.. what phone do you actually have (which network) and was it sim and cid unlocked before flashing?
Was it HardSPL'ed?
Hi,
I tried some ROM from this website to change my wizard to wm6.
When the RUU finishes at 100procent my device restarts and normally it should be flashed. But mine always restarts the original rom. On the pc it says that the procedure has finished succesfully.
Dont know if this has anything to do with locking, but I used the lokiwiz to unlock my device.
Anyody an idea to solve this?
Grtz
Annihil8
your wizard is still CID locked...
try it again ... follow the instructions ... read carefully the messages when running lokiwiz ... could be misleading sometimes at a first glance ...
I'll give it another try. But the lokiwiz keeps telling me that the device is unlocked. It doesn't even give me an error like you get with the AKU2.
error:itwritedisk-an internal error occurred
So that is why I think that should be ok...
you may want to use the WST tool to check the CID status ... you find it on this forum. don't have the link on hand right now ...
please help me, i have O2 XDA ORBIT ( arte200 ) i try to flash it with a new rom but he dosn't accept it, when he arrived at 3% of upgrade my arte200 switch off and switch on again and the message who showed me is :
Error [294] invalid vender id
I don't know to fix this problem.
Thank you anyway.
Regards
Reda
redadido said:
please help me, i have O2 XDA ORBIT ( arte200 ) i try to flash it with a new rom but he dosn't accept it, when he arrived at 3% of upgrade my arte200 switch off and switch on again and the message who showed me is :
Error [294] invalid vender id
I don't know to fix this problem.
Thank you anyway.
Regards
Reda
Click to expand...
Click to collapse
uspl...remove sim and sd...flash again
I have got hold of a T-Mobile Ameo that's gone wrong whilst upgrading/unlocking, I believe they were using the Olipro way (which I've successfully done fine myself in the past) and it's now stuck in the multi colour bootloader screen which displays:
ATHE100
IPL-v2.02
ATHE100
SPL-v1.10.RP00
And although it shows USB when plugging it in to a computer it won't connect to ActiveSync so I can't get to the stage where I can re-flash it.
I have tried the hard reset by holding down the volume and pressing the reset hole, and I get to the prompt:
Press ACTION to restore factory default
Press Camera Key to exit
I then press the little nipple button down and it displays:
Restore default complete
Press Power Key to boot
Press CommManager Key to format micro drive
I press the Power Key and I'm back in the multi colour boot loader back where I started, and I canot connect to ActiveSync to reflash.
Any help to turn this paper weight back into a useful device would be appreciated...
exactly the same problem here.
any guru with a solution ?
seckt0r said:
exactly the same problem here.
any guru with a solution ?
Click to expand...
Click to collapse
Hi seckt0r,
have you tried reflashing the original rom for your device while connected to your computer in bootloader? ftp://ftp.xda-developers.com/Athena/Shipped_Complete_Updates/
another idea would be to try sd card flashing,(see the wiki) but you would need to extract an image from the flash utility.
One thing to note is you couldn't flash any of the newer roms as you are probably not unlocked
lakeman,
Thanks for the tips and sorry for the late reply.
I did figured out how to make it work again, and played a lot with the device
Already delivered back to the 'client'...
Active Sync issue is solved !!!
Active Sync 4.5 had changed the way it connects from USB Serial Sync Mode to RNDIS Sync Mode. So it can cause problems in connecting with PPC. Try install on your PPC the "ActiveSyncMode.sa.CAB" that you can easily find on Google & run it. Hope this might help.
same problem here i tried to upgrade with orignal rom tmobile uk but its show invalid vensor what can i do plz help thnx
got your msg ahmerp but I don't use MSN
have you tried some of the other shipped roms
if that fils you could try cmone s mtty solution to rswrite the vendor id
seckt0r said:
lakeman,
Thanks for the tips and sorry for the late reply.
I did figured out how to make it work again, and played a lot with the device
Already delivered back to the 'client'...
Click to expand...
Click to collapse
Please help me to sort out my ameo problem some one flashed with with wrong rom now phone shows only volume icons and whenever i try to flash with tuk roms it always give me error invalid model id e.g
Check post 33 on this thread http://forum.xda-developers.com/showthread.php?t=387454&page=4. You MUST use Windows XP with SP2 optionaly SP3 for this to work. If you need mac file for SPL1.2 send me email.
ameo stuck on bootloader after trying to unlock with athena unlocker
my tmobile uk was on rom 1.12. i tried to unlock and it went faulty on step 1. now it boots only in bootloader mode tri colour screen.
any tmobile rom gives invalid vender id error 294.
anyone can provide me with the original 1.12 tmobile uk wm5 rom?? also anyone cna help me online to change vender id using rswrite or pdocwrite.
Ayyub
hafizayyub said:
my tmobile uk was on rom 1.12. i tried to unlock and it went faulty on step 1. now it boots only in bootloader mode tri colour screen.
any tmobile rom gives invalid vender id error 294.
anyone can provide me with the original 1.12 tmobile uk wm5 rom?? also anyone cna help me online to change vender id using rswrite or pdocwrite.
Ayyub
Click to expand...
Click to collapse
Can you post what is written on the bootloader screen?This will help define what rom you need to flash.
thanks lakeman
my bootloader tri color screen shows
I hv a new htc Athena (ameo t mobile uk locked).
I was trying Athena unlocker by olipro. I hv used this on a number of occasions and no problems.
With the present one it was on rom 1.12 tmobile uk and while doing Athena unlocker it crashed on first step.
In bootloader mode it shows
Athe100
Ipl-v1.00
Athe100
Spl-v1.10. RP00
It keeps giving invalid vendor id error 294 when I try to flash tmobile original rom
I have read olipro message who say that I can only repair this via pdocwrite. Apparently it’s the spl that’s corrupt so I need to repair this.
I will be very happy if u can help me with a step by step guide to repair the spl using pdocwrite or rswrite to change vender id.
I am using windows xp or windows 7 and I hv tried mtty and I can successfully connect to Athena and do info 2
It shows level=ff ie it is still locked cid.
Wdata also seems to work but even after password says pass I do not really know how to change the device id or vender id
Device id shows HTCS Þ?ÒtHTCE
I am told y olipro that this device id or spl can only be repaired via pdocwrite.
How can I do it..
Pls help me u can email me on [email protected] or hotmail.com and can add me so u can please provide me with a step by step guide repair my athena ameo
Ayyub
in the begining i was trying to flash a cooked rom but the battery was only at ten percente of charge...SO my phone is now dead ..the good thing is that i could get into bootloader it shows ipl.1.25.0001 / spl 1.11.cmon but when i try to run any RUU it shows ERROR 300 SO please if any one could help ...thanks
I have the same problem 300 error, as I have investigated there is no solution ..
this is because the CID is in error or is blocked
In this case, this brick pda