in the begining i was trying to flash a cooked rom but the battery was only at ten percente of charge...SO my phone is now dead ..the good thing is that i could get into bootloader it shows ipl.1.25.0001 / spl 1.11.cmon but when i try to run any RUU it shows ERROR 300 SO please if any one could help ...thanks
I have the same problem 300 error, as I have investigated there is no solution ..
this is because the CID is in error or is blocked
In this case, this brick pda
Related
Hello Buds,
I've upgrade my p 3300 a few weeks ago with Artemis_touch_1.0_WWE_rapid
IPL 1.14.0001
SPL 1.14.000
GSM 02.67.90
OS 3.7.0.0
After some days a freeze and soft reset, I made a hard reset, and re-use the upgrade soft ware.
Now its completly block on the boot page with HTC.
I use RUU(in( Artemis_touch_1.0_WWE_rapid) in the Bootloader but it run but after 3% : error 270
If a use a newer RUU ( Release_Aje_fr_1.90Full_YuanYuan) : error 260
please help me I completly lost !
Trux 13
HTC P3300IPL 1.14.0001
SPL 1.14.000
GSM 02.67.90
OS 3.7.0.0
I had almost the same problem. I intented to change my ROM with an WM6 but it faild and the PDA is some kind dead it freezes in the boot screen. is there some tool to change the rom to an original HTC rom or thre is no help. I hope somebady can help me. the version of the ROM that apears on the screen is:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 4.0.0.0
I've tried to :
Hello...
In bootloader run USPL
It run, to 0% >> to 100% but right after : error 270
Still block...
Trux 13
hmm i don`t know how i can get the device to boot loader mode can u tell me how
Bootloader
Go in ths Thread :
http://forum.xda-developers.com/showthread.php?t=306880
Trux13
hi i solved my problem i used one spanish version of the WM6 for P3300 and it works if u want hire is the link http://www.megaupload.com/es/?d=YZOQEF4H
u can install it and then change to one on english its what i will do today and i saw how to enter in 3 color bootloader mode ON/OFF boton + VOCAL + RESTART then holding the ON/OFF + VOCAL
Stillnot working
I tried your *.exe file but not working
Trux
me too . always the error
ipl 1,14,0001
spl 1,14,0000
g 02 67 90
os 1,14,00
i ll be crzy! jesus! someone help me!
how to run the uspl on this tm phone ?
Has anybody solved the problem? I have exactly same errors and can't do anything
Try This:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
i tried this already. Invalid certificate any other ideas ?
woojtekr said:
i tried this already. Invalid certificate any other ideas ?
Click to expand...
Click to collapse
Hi
if you need still help GG9735272
the only solution !!!!
woojtekr said:
Has anybody solved the problem? I have exactly same errors and can't do anything
Click to expand...
Click to collapse
to everybody who is stuck at HTC screen. The only,and i mean the ONLY way to fix this is to find the original rom for your provider !!! belive me,i`ve tried every possible other way.
SD Card Flashing wont work coz your devices are probably CID Locked,so it goes only to 3% flashing and restarts.Finally I found original o2 ROM (German) and it worked like a charm Even the original o2 (English) ROM did NOT work,it had to be the German one,coz probably the device came with German ROM originally !!!.
So my suggestion is,stop trying to flash it with different ROM`s and spend some time finding original ROM from your provider and it has to be the same language as your provider. even if it`s WM6 and your device was originally was WM5,as long as its from your provider and same language it should flash with no problem.I spent 2 weeks to find this out ))
Good Luck to everybody ))
savich said:
to everybody who is stuck at HTC screen. The only,and i mean the ONLY way to fix this is to find the original rom for your provider !!! belive me,i`ve tried every possible other way.
SD Card Flashing wont work coz your devices are probably CID Locked,so it goes only to 3% flashing and restarts.Finally I found original o2 ROM (German) and it worked like a charm Even the original o2 (English) ROM did NOT work,it had to be the German one,coz probably the device came with German ROM originally !!!.
So my suggestion is,stop trying to flash it with different ROM`s and spend some time finding original ROM from your provider and it has to be the same language as your provider. even if it`s WM6 and your device was originally was WM5,as long as its from your provider and same language it should flash with no problem.I spent 2 weeks to find this out ))
Good Luck to everybody ))
Click to expand...
Click to collapse
I have the same problem and I've come to believe that this is the only solution. Just one thing: I didn't back up ROM before I tried to flash (talk about a noob mistake).
So, I ask, I plead, I beg... can anyone tell me where to get an original Orange France ROM for the Artemis (SPV M650)?
To my knowlegde you cant backup the rom from your device. whenever you change your rom, use the USPL tool. It is a golden rule until something better is made.
Here are some tips:
First make sure you have a original factory rom from your provider/brand/etc.
Check with a soft reset if code: SPL 1.11000 appears on the the boot screen. (then it is CID unlocked) Any other number and it is locked so you have to USPL first before you change to any custom rom.
If you flash a factory rom then the SPL resets to a non SPL 1.1100 number again. Use USPL to CID unlock again.
Also avoid Vista (especially 64bit) to use the USPL tool. Do it on a windows XP machine. Also there reports of glitches in the usb connection and active sync when doing upgrades or USPL. So keep you system as clean as possible. Dont use a USB hub and disconnect any other usb devices just to make sure.
Also remove your SD / SDHC card before doing a upgrade.
Sometimes the new rom misses some stuff when flashing. When this happens just flash the rom again. But first make sure if its still CID unlocked by soft reseting and check if SPL 1.1100 else use USPL first.
Even if you did all that, there still can be things that can go wrong. So if you absolutely confident to do a custom rom then do it. Otherwise use original upgrades from your provider
brim
help i breaked my htc p3300
jai lereur 270 jai essaiyer tous les rom rien ne marche ::
p3300 work again
p3300 movistar work again
Hi,
hopefully somebody can help.. have an 02 Orbit currenty will only go into bootloader mode. IPL 1.25.0001 SPL 1.11.0000 and has RUU in top right corner. Most times when plug USB into sytem USB will come up bottom left corner
Tried flashing various Roms from standard 02 - lastest anja_ diamondsty v01 cooked. it starts the download but everytime an error notice comes up... The update utility cannot be used for your PDA phone. Please get a newer update utillity ... any ideas?
anybody have an answer or possible cause?
Try flashing a different ROM or try re-downloading the one you want to use. THe IPL and SPL seem fine on your phone.
RAF_SHC said:
Try flashing a different ROM or try re-downloading the one you want to use. THe IPL and SPL seem fine on your phone.
Click to expand...
Click to collapse
That is the challenge ... the error message comes up when trying to install any ROM
error 200lease get a newer update utility
hey,
did you solve the problem?
cause i got the same...my artemis is connected to my pc with Bootloader/USB-Connection,started the Update Utility(as I did it many,many times before^^without any problem) and after it verified the Information on my phone,
it brought this error 200lease get a newer update utility...
Why does it do that?? A few hours before it worked great and now? Every ROM,Artemis Touch 4.02,B&B4.3,BB5,Artemis Diamond,even the USPL,has now this error!
By this moment, it looks like I'm unable to put any ROM on my Artemis...
Please,can you help me to fix this problem?
ok, i fixed it
Got the original o2 rom on the pc from my friend, with this connection(o2rom,other PC) it worked...for now...because after starting my artemis i wanted to get my old Artemis Touch 4.02, so i run USPL but after 100 % it brought the error 270...
Helle everyone! First of all, sorry for my bad english! However some days ago i read that htc have done a wm upgrade for my phone (6.1) i didn't know that it wasn't for gsm version.. when i did thet upgrade i had on the phone the onyx rom and the cid unlocked, with this upgrade the spl came back to the original but the original rom doesn't start the installation. so i have the spl 2.26.0000 and the onyx rom that doesn't start and when i turn on my phone it remain in the display of 3 colors of upgrade.. what i can do now?? i have the warranty cause i bought the on july.. plese help me, how can explain them this fact? i'm in yours hand..
thank you
Jasper
Hi
I think you should try to cid unlock again, if it works you could flash the onyx again, if not there's a lot to read in here http://forum.xda-developers.com/showthread.php?t=406721
Good luck
i've tried a lot of times to unlock the cid but it give me the error: ERROR [200] Invalid update tool
Please get newer update utility
I used the latest version of spl and it's the same.. I tried to dump the original rom and it give me the same error 200.. Further there is no RUU in the display of htc..
Sorry for the english
Nobody can help me??
Hi JesperHTC-Touch !
Do you use windows xp or Vista to sunc yourè phone?
xp, but i have the phone locket to the bootloader and activesync it isn't green..
Hi JasperHTC-Touch!
I have also got that ERROR [200] Invalid update.
I recomend you to install IPL & SPL 310 you can find it her http://forum.xda-developers.com/attachment.php?attachmentid=130771&d=1226977938
http://forum.xda-developers.com/attachment.php?attachmentid=130567&d=1226919217But use this tool to do the upgradehttp://forum.xda-developers.com/attachment.php?attachmentid=101826&stc=1&d=1217022319
Dont be worry i diddent got the color bar either. But be shure to have at least 50% of battery capacity before yoy do the upgrade. Put the file from (310 inside the catalog in 226 /RUU and replace the file RUU_Signed.nbh that you downloded at press theelf-uspl.exe and read carfully what you seen on the screen and dont dissconnect youre phone before you have started up the phone completely. Thats what i did and it works for me. God luck
Kindly MacRoy
I did what you told, but it doesn't work, i'm triyng to upgrade with all the original rom of this phone.. it's impossible i can't unbrick my phone
Another fact it doesn't enetr in ruu-bootloader.. only bootloader
Try to hard-resetting the phone!
just tried and doesn't work.. i spent 350 euro in july for this phone!!
Hi
try the unbricker rom method mentioned in this thread
http://forum.xda-developers.com/showthread.php?t=446242
it is a trial original rom that can be flashed from SD card then after that you can CID unlock again (good Luck)
dowsn't work :'(
i also tried to unlock the spl from microsd but it give me the error: invalid certificate..
Nobody can help me?? i don't want bring it to the guarantee.. sorry for the bad english..
Hi I have aquired a lovely wing which looks like new - It has a problem !!
I need to upgrade the ROM as its stuck
I have attempted to load a few different ROMS and I put it into bootloader mode
IPL 1.11.0001
SPL 1.11.0001
Shows up on the tri color screen
I then attempt to load the rom and it goes all the way to load 1% or so then an error mesage comes up "Error 300 - Invalid update tool " This update utility cannot be used for your PDA Phone Please get newer update utility"
I have read the pages here extensively and cant seem to get an answer
Can I please respectfully ask for some assistance with this problem I cant wait to get this phone working ?
Kind regards
John
It seems like you didn´t read extensively like you said...
Flashing custom Roms without Hard-spl or Uspl can´t work.
If you tried to Hard-spl your phone search for "goldcard"
If not get an official Wm6 Rom from your provider.
When it´s done read this:
http://forum.xda-developers.com/showthread.php?t=358225
Now you can flash any Rom
plz help me .after i try instal a new rom ( i did it wrong way)i am stuck in color boot mode screen(pushing record +power buton)
i downloaded several rooms but it give me "error 300 invalid update tool" and the message that say get a newer update utility
i try the original rom (HTC_1.12.405.01_026790_WWE_SHIP) with no result.I try the original cd that came with the device ...oficial rom downloaded from htc club...nothing !
My device is already unlocked and I have used several ROMs earlier...
IPL 3.13.0001
SPL 1.11.0000
did someone find any solution to this problem ??!!
Thx.
still no solution ? mtty comands or something ...