Related
i tryed to change os language from italian to english and i put my hp6915 in bootloader mode by copying and executing EnterBl.exe from my device... hard reset says "clearing ok", but the device rests in bootloader mode... i need italian rom in order to reflash the damned thing... of course, a method to bypass language check from english hpruu would be better, but i'd be happy to restore sw... please i need a solution asap... thank you...
i have similar problem MY iPAQ hw6915 is now in bootloader mode i need some firmware to update i cant find anywere, somebody can help?
Hi,
There is a tool which should help! It worked for me. It's called UNI_ExitBootloader
(ftp://xda:[email protected]/Universal/Tools_and_Programs/uni_exitbootloader.zip)
1. download the tool
2. disconnect USB cable from your device
3. disable USB connection in ActiveSync
4. reconnect USB cable
5. wait some 30 seconds
6. run the tool
7. If successful, device will boot itself.
Pawel
this solution is only for UNIVERSAL, not for SABLE, DONT WORK
@pjurczy
thanx a lot your solutin work whit my hp hw6915
thanx thnax thanx
juliog said:
this solution is only for UNIVERSAL, not for SABLE, DONT WORK
Click to expand...
Click to collapse
today i try and 100% work
I'm glad it worked
Pawel
you are the best!!!
pjurczy said:
Hi,
There is a tool which should help! It worked for me. It's called UNI_ExitBootloader
(ftp://xda:[email protected]/Universal/Tools_and_Programs/uni_exitbootloader.zip)
1. download the tool
2. disconnect USB cable from your device
3. disable USB connection in ActiveSync
4. reconnect USB cable
5. wait some 30 seconds
6. run the tool
7. If successful, device will boot itself.
Pawel
Click to expand...
Click to collapse
Yuo are the best!!!
worked for me Thanks!!
Super duper!
Been having sleepless nights. Thanks a lot for your solution. Worked like a charm!
Dam not work with win7 64bit, you have another solution?
Doesn't work in vista or 7
How to disable ActiveSync?
When I connect my HP to PC it recognizes as "HP USB Sync".
I tried to disable that thing in Device Manager, but still getting error from "uni_exitbootloader" program (cannot open usb port... and so on)
What can I do? Please, urgently need advice!
P.S. I firstly tried to update it's rom to english, with sable ruu, got error something like "fail to initialize"; and then my hw6915 stuck in the bootloader screen. tried hard reset, but after "clear ok" it just got back to that HP screen.......
EDIT --> I have just found out that these all methods doesn't work with Windows Vista or Windows 7, so I'm going to get to my brother's computer with XP soon to try another time
So every time you do the flash rom will have to borrow your brother's computer ??
why do not you use WMDC 6.1 for Windows Vista that also supports and works in Windows 7 ??
try to check at http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=14
Hakim Rahman said:
So every time you do the flash rom will have to borrow your brother's computer ??
why do not you use WMDC 6.1 for Windows Vista that also supports and works in Windows 7 ??
Click to expand...
Click to collapse
This one for WM 6.1, what could i do with it? hw6915 is WM 5.1.
Another cool thing, that i have just flashed it with uk rom successfully, with xp.
btw, the computer with xp is half-mine not only brother's.
my prophet is snot recognized by the usb
there isn't any reaction that the ppc is connected with the usb
please help.........
read here I had the same problem http://forum.xda-developers.com/showthread.php?t=353547 if it's it not for flashing a New rom then try disableing your antivirus and see if that helps are change the option from accept all usb connections de select it in active sync and try it again ok if that dont work plz post a reply ok
thnx 4 the reply
but my prophet cant even be readable on the pc to download a new rom when i connect it there is no any reflection that there is a new usb device connected while the usb workin well i tried it with any other usb device and i tried my propchet onmore than one pc
Well if you need to install a new Rom follow the instructions in the link I give you we all have that same problem just try to flash it thats the only solution I can give here do it ok http://forum.xda-developers.com/showthread.php?t=353547
Additional RECOVERY steps for 3 colors screen boot-up after flashing...
a. Force Bootloader Mode MANUALLY Then flash PVtemp or NVID for prophet( P.S. the boot up screen will be changed to Qtek...),
b. ( Optional) Use Lazy_Tool to upgrade to WM6.1 (default rom is Cloudyfa's 19213-clean, you may change if you want...)....^_^,
Thats what I did and the pc did not even find the usb but I still got it flashed try it again ok And please post your results ok
HI ALL
please I need your help
i have an Orbit XDA with German ROM from O2
I installed another rom on the device and everything was ok
i made the First synch and everythng was ok
NOW i'm connecting the Device with PC and Nothing happen i made a hard reset i tried t remove theUSB From the DEVICE MANAGER ON MY LAPTOP and still this problem i'm so confused i tried to make a synchronization through the Bluetooth it's working but i need the USB cause i need to change the ROM So could you please tell me what to do with the SYNC MY LAPTOP OPERATING SYSTEM IS WINDOWS VISTA!
OR PLEASE TELL ME WHAT TO DO AND HOW TO UPGRADE THE ROM FROM THE MICROSD CARD
THANKS A LOT
Sd card flash
You can look at this wiki
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
try to start the device in Bootloader mode by prssing and hold Nots(voice command button) and press the restart button try to upgrade your rom while in bootloadr
* Bootloader is the multicolored screen
hello all
i have i-mate jasjam its proplem is no gsm
i tried alot for flashing the radio bymany verions but it stoped and when i tried t flashing it by many roms and also the original rom it stoped on the step gsm
and if i flahed it by any rom wihout the radio it completes but with no gsm
i hope to find a resolve to this prop plz to make my phone alife again
thx for u all
This is maybe problem with hardware ! better to you go in service,bcs if you flashed with original rom and radio,he must to work 100%
thz alot for help but i need a solution do it by myself thx
Hi, can you please write down what is on the bootloader screen ?
hi aze2learn thx for trying help me
ok
on the boot loader screen
HERM100
IPL-1.04
HERM100
SPL-2.10.Olipro
thx alot aze2learn
Well, since you already have hardspl 2.10-Olipro, please make sure you flash WM6 (green welcome screen) or above because WM5 (blue welcome screen) for sure will make the device show 'No GSM' if it writes an old radio version. Try original rom for your device here first : http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
It is recommended to use radio version (GSM) from your carrier. You can also try other radio (if you want to) from here : http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms . Some say 1.47.30.10 is the best in terms of power consumption but maybe not suitable for others (depends on carrier/geography)
Note : Only original ROMs from HTC/carrier have radio. Cooked roms don't include radio.
All the best
ps : Only HardSPLed device will allow flashing extracted radio rom. Stock SPL will stop the device from flashing.
ok man thx alot i will try and i will tell u but tell me how to flashing it by pc or by sd
thx
Try RUU first (flashing through pc using usb cable) but if you're having problem such as error 260 (no connection), you can use sdcard method since you already HardSPL your device
ps: sdcard method only works on FAT32 filesystem and non-SDHC microsd.
i tried during the pc and it gives me error 262
and i tied during the sd stoped on gsm step
i dont know what to do??????!!!!!!!!!!!!!!!!!!
mony_nana said:
i tried during the pc and it gives me error 262
and i tied during the sd stoped on gsm step
i dont know what to do??????!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Hi,
Extract RUU_inside.exe (use winrar or 7zip) RUU_inside.exe is in the original HTC ROM package ... get the RUU_signed.nbh and put into a new folder.
Then use RUUWrapper from here : http://forum.xda-developers.com/showthread.php?t=298737 and put it in the same folder with RUU_signed.nbh
Boot the device in bootloader mode. In RUUWrapper, tick 2.10 (new bootloader) and is it Hard-SPL. Follow the instruction.
All the best
ps : please check your PM
hi man
its stoped again on 11%
my mind will be pumped and i dont know what to do
i do everything i think
i will be crazy
maybe your battery drained out already? if so, try turn off the phone, charge it for 30 mins and try again.
ps: have you read your PM?
its already full charged
Please don't worry too much. Since your device already HardSPL, your device can still be revive.
i hope it will be aliveagain but how?
i am too tired from searching on the internet about this prop
and i didnt get any resolve for it
i think u have mor experiance than me and u can search more deeper than me
i will be here tmorrow maybe u can find a selution
i am from egypt and u ?
I'm from Malaysia (GMT+8) and please read your private message. I would really love to help but I need extra info such as what OS are you using, what happen before you got into trouble,etc.
Hi everyone i was wondering if anyone could help me... i have several questions about my htc touch elf see i just upgraded it to the onyx 4.something version and after 4 days the wifi stoped working it wont turn on and it wont detect my sd card either... i was wondering if anyone could help me on how to degrade it to a better ROM or anything cause when i try to degrade the onyx 4.something to 3.0 it says it cant establish a conection between the phone and the computer when i run the romupgradeutlity and when i hit the upgradeimage buttom... ... please help me.. thanks a lot!
post in Onyx ROM thread and read the stickies.
Your Elf Device, Our Vogue Device
Sorry, your device is simply different internally.
http://forum.xda-developers.com/showthread.php?t=713265
rasv19 said:
Hello I was wondering if anyone could help me... i have an htc touch elf and i upgraded it to the Onyx 4.0 after 4 days of use it started giving me some trouble sometimes i hitted the touch screen and it opened something else , my wifi stoped working it wont turn on and it wont detect my micro SD... i tried downgrading to Onyx 3.0 through ROMupdateutility but when it was at 0% it said it coudlnt detect the mobile device... i was wondering if anyone could help me fix this problem cause i want my phones wifi to work and micro sd too. thanks a lot.
Click to expand...
Click to collapse
please try a hard reset, that should help solve the problems.
i doubt if this is anything to do with ROM you flashed (since you have flashed successfully, as your phone does boot.
if none of this works please post.
a hard reset should help you though.
rasv19 said:
nope it didnt worked my phones wifi still not working and its not detecting my sd card.... like wheneve ri turn blutooth on the wifi green light turns on with it but the wifi wont turn on itself and then when i go to the music thing on my phone it detects the first song i have but when i play it says theres no files and the sd card wont show up on the file explorer.... and other thing when i try upgrading or downgrading my phone by romupgrade utility i get the error 222 canot eswtablish conections between your pda and computer check usb cable.... so i dont know cause the first time i upgraded it from the manufacture ROM to the onyx 4.somethhing it went pretty great..
Click to expand...
Click to collapse
i see, error222.
please make sure that your USB cable is working.
pleasemake sure your computer has active sync 4.5 installed ( if windows XP)
or the latest WMDC (if vista or win7 )
also regarding the memory card, are u sure the card is fine ?
please put it another device/card reader and check, try formatting it and see if ur elf detects it.
ROMs usually don't have anything to do with memory drivers.
what HSPL/USPL did u flash ?
Prowess said:
Sorry, your device is simply different internally.
http://forum.xda-developers.com/showthread.php?t=713265
Click to expand...
Click to collapse
You posted in the Vogue section. I have transferred your thread to the Elf section.
yeah it works on other devices.... the usb cable is working really fine and i dont know what uspl i flashed .. . like i mean everything went rite until 4 days after i instaled the onyx 4.0 ultimate everything was working fine with it but 4 days later it started to give me that problem ... and i try to change ROM but i cant it wont let me i run active sync andeveyrthing it says its conected i run the romupdateutiliy then the status bar opens up but it stays at 0% and then the error 222 shows up... but my phone goes to the bootloader but it wont pass from there.. and when i close the romupdateutility my phone switches to the status bar but stays in 0% and then my phone crashes and i have to unbrick it.
first of all please do not open 3 different threads for the same problem, i have removed the other two.
also as aman said try posting in the the rom thread.
please read thee thread which have been stickied on the ROM development thread.
please be patient
thanks for your co-orperation.