HI ALL
please I need your help
i have an Orbit XDA with German ROM from O2
I installed another rom on the device and everything was ok
i made the First synch and everythng was ok
NOW i'm connecting the Device with PC and Nothing happen i made a hard reset i tried t remove theUSB From the DEVICE MANAGER ON MY LAPTOP and still this problem i'm so confused i tried to make a synchronization through the Bluetooth it's working but i need the USB cause i need to change the ROM So could you please tell me what to do with the SYNC MY LAPTOP OPERATING SYSTEM IS WINDOWS VISTA!
OR PLEASE TELL ME WHAT TO DO AND HOW TO UPGRADE THE ROM FROM THE MICROSD CARD
THANKS A LOT
Sd card flash
You can look at this wiki
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
try to start the device in Bootloader mode by prssing and hold Nots(voice command button) and press the restart button try to upgrade your rom while in bootloadr
* Bootloader is the multicolored screen
Related
where do i get the XDA manipulator
http://wiki.xda-developers.com/index.php?pagename=XDAmanipulator
Thank you very much LumpiStefan for your timely response and for the link to get the XDA manipulator, i have been looking for it for so long. THANKS DEVELOPERS
I too appreciate the link, I have been searching for this for ages. Cheers.
.......Ib a n e
I really appreciate the link thanks
BR
wallaby usb flashing
hi there ,,can anyone tell why when i enter usb flash mode i cant flash via it wheni try to run a upgrade program it says plug in yor pda and on the pda screen all i get is usb flash mode,,connect usb cable now... but it is lso in my device manager i see my pda as a windows ce devices so what the hell is going on ?
pls dont tell me only way is via sd card surely it can be done via usb lead if so please can some post a step by step on how to flash via usb as i did so already from pc2002 to win2003 using the rom from xda developers and now i get a logo Ozup and underneath says ,,this os image is meant for microsoft employees or technicians bla bla bla
but i can enter boot loader fine access all the menus in bootloder my bootloder version is v5.15
pleaaaase someone help me
There are two possibilities to flash a device:
1. In Bootloader via SD Card
2. Normal booted device via Active Sync
But i do not know what you mean with USB Flash Mode
Stefan
thanks for replying back now i have new problem
i have a big problem and i think your the only person who can help me my problems occured when i went to flash my wallaby device with this rom ftp://xda:[email protected]_ENG.exe/
i wish i never bothered the device was perfectly running fine until i flashed it with this via usb it all was a succes when i done a hard reset i got a screen with a oz up logo and underneath it says "microsoft internal use only" this operating system image is meant for use only by microsoft employees and contractors ,,and the crazy thing is i cannot enter my bootloader which was v5.15 so i can flash it via sd card its vanished no bootloader only that screen and on the bottom right corner it says ,,g32s54,v4.08,3.04 when i plug it in usb all i get is a unknown device and i cannot flash it so please if there is a way even if its pretty technical i would be honoured if you can help me out i would be very grateful if u cn show me a way of getting the bootloader back many thanks
still no bootloader on my wallaby device
hi i,m really upset if i can only get acces to the bootloader i can atleast flash it via sd card so please if theres a way of getting back the bootloader or somehow flashing it back please any help would be appreciated
radio stack
had same sort of problem this is how i fixed it go here
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
don't use the 4.16 use the rs 4.21 when i did the upgrade i was then able to connect to active sync then changed the rom try the special rom 1.2
hope this helps
mate the problem i have is that i cant acces the bootloader for me to do anything its gone and this happened after using that dodgy rom
all i want to no is there a way of putting back the bootloader on to the device as its not there its been somehow erased after the flash i done
mate if you try what i said to try this should help you to connect your phone back to your pc then you can change the rom from there you shold get bootloader back when you put a new rom on
I followed instructions (http://forum.xda-developers.com/showthread.php?t=244549), and I executed 3.17.03_ENG.exe after xdaunlock.exe failed.
My device is now unusable, some error occured regarding usb connection and now all I have on pocket pc is upgrading bar with 0%.....cant reset cant do anything?!?
Please help!
If I understand corectly I need to put boot on my sd card.....
look here
this might help http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
thnx....and....where can I find rom image?
http://www.romkitchen.de/
no bootloader on wallaby
hello again ,,to jay05 thxs for replying back but u dont seem to understand what i am saying i will say it more clearly hopefully someone can help ,
ok there is no bootloader on the device its been erased when i do a hardreset nothing happens so can someone please tell me how to put back the bootloader on the device ,,its impossible via sd card and when i connect it via usb cable all i get in my device manager is a usb device as"HTC USB SYNC"
ok so there must be software that can somehow flash this pda as the computer recognises it as a htc usb sync ,,i done a search on google and found several software that runs on similar setups like the treo but none for wallaby so please someone there must be a way to upload the bootloader back to the device via usb cable pls someone help me out i also tried the xda developer tool pnewbootloader no use nothing happens
there must some kind of special HTC software that can flash the chips on the pda similar to the jtag technique but thru usb as again i repeat my comp sees the pda as a htc usb sync
i hope someone can help
many thanks and a happy new year
Hi Wizards,
Im having a Qtek 9100 and using a ROM cooked by Mfraazz. The phone application seems to hang and i have to reset in order to make it functional...the problem does not end here. When the phone boots up, the start menu bar is not visible...I have to hard reset my device 3 -4 times..thats whn the start menu is visible..
I have only one application(Good Link) running...plz help me guyzz
it is time to donate to XDA-developers!
Just reflash the ROM, friend. Seems to be a bad flash to me.
deleted this post
wiztek said:
Hi Wizards,
Im having a Qtek 9100 and using a ROM cooked by Mfraazz. The phone application seems to hang and i have to reset in order to make it functional...the problem does not end here. When the phone boots up, the start menu bar is not visible...I have to hard reset my device 3 -4 times..thats whn the start menu is visible..
I have only one application(Good Link) running...plz help me guyzz
Click to expand...
Click to collapse
try another cooked ROM or an official one and see if problem persists...
the mfrazzz crossbow reloaded made my kjam hang on the bootloader as well n my fone cant b detected by active sync either plz help how m i suppose to flash another rom wen active sync itself dont detect my rom
z0d1ak said:
the mfrazzz crossbow reloaded made my kjam hang on the bootloader as well n my fone cant b detected by active sync either plz help how m i suppose to flash another rom wen active sync itself dont detect my rom
Click to expand...
Click to collapse
Rom has got nothing to do with Activesync not detecting your phone,it's most probably the problem of Activesync application or your USB cable not establishing connectivity.Check the usb connectivity for problems.To verify the connectivity,check if it gets charged via usb connection.
secondly,get your phone into bootloaders and connect it to your Pc via usb cable,see if usb appears at the bottom of the bootloader mode (multicolor screen),if it then it's connecting.
You don't need Activesync for flashing a Rom to your phone,it's done via usb cable,and while flashing activesync is automatically turned off by the Ruu.So if you are able to establish connectivity via usb cable in bootloaders (multicolor screen) you can flash to any Rom.
Cheers
my prophet is snot recognized by the usb
there isn't any reaction that the ppc is connected with the usb
please help.........
read here I had the same problem http://forum.xda-developers.com/showthread.php?t=353547 if it's it not for flashing a New rom then try disableing your antivirus and see if that helps are change the option from accept all usb connections de select it in active sync and try it again ok if that dont work plz post a reply ok
thnx 4 the reply
but my prophet cant even be readable on the pc to download a new rom when i connect it there is no any reflection that there is a new usb device connected while the usb workin well i tried it with any other usb device and i tried my propchet onmore than one pc
Well if you need to install a new Rom follow the instructions in the link I give you we all have that same problem just try to flash it thats the only solution I can give here do it ok http://forum.xda-developers.com/showthread.php?t=353547
Additional RECOVERY steps for 3 colors screen boot-up after flashing...
a. Force Bootloader Mode MANUALLY Then flash PVtemp or NVID for prophet( P.S. the boot up screen will be changed to Qtek...),
b. ( Optional) Use Lazy_Tool to upgrade to WM6.1 (default rom is Cloudyfa's 19213-clean, you may change if you want...)....^_^,
Thats what I did and the pc did not even find the usb but I still got it flashed try it again ok And please post your results ok
hi anyone pls help,
i have one imate jasjam, the initial problem is i done a hard reset and the phone reboot and it wont finish running the customise application installation, after that the phone cant detect network, i had run a hard spl into the phone and then try to flash a rom that i download from forum but it only run 11% then stop then i realise that the rom i flash is for htc jasjam not imate jasjam, now my phone can only stay at the boot loader mode, i also try different rom but no luck so i think i ask for your help
here is my device details at the boot loader mode
IPL-1.04
SPL-2.10.01ipro
before i flash it i also cant find any radio rom version in this phone so i guess the radio rom also missing or what just not sure....
i think i flash the htc jasjam wrong model rom even now i flash back the original JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship this error message come out "ERROR [260]: update error" and it ask me to check my usb connection.
i search the forum and few member advice me to use mtty and i did tried that many time it didnt work, another member advice me to use this method "Formate yr memorycard & Unzip attached file in your memorycard named Hermimg.nbh & put yr cell in boot mode & follow screen instructions..........this illl boot yr celll out to boot mode......... " i tried that but the phone always stay at boot mode and no other instructions came out at all so im really lost and just hoping somebody can help me solve this problem...
can anyone pls guide me step by step of how to flash this phone back to normal, your help is much appreciated, many thanks.
Hi, i had the same problem flashing from the SD card. Are you using Vista or Windows7? I tried with Vista Format card, drag and drop renamed image onto sd card. Stuck it in the phone, reset and like you say hangs on bootloader. Then i tried the same thing from my Windows XP laptop, exactly the same format, rename drag and drop and everything works fine. Hope this helps
first i tried with vista then i tried with xp the problem still there, any other idea to solve this problem? thanks anyway for your advice
roms?
G'day, I've only really been reading about roms and these phones for only a few hours but I'm pretty sure that htc jasjam and imate jasjam are one and the same phone i think the said rom are used with all hermes type phones..
thanks and sorry for my ignorance if i'm mistaken