Database Users

need to make my brick back to a fone plz help

cingular 8125.
I need the original rom file (original firmware )can anybody help plz right now my fone stuck on the RUU mode can anybody help

If it is realy a brick without any chance of life I need a part of it: the keypad.

Thats really rude.

not a complete brick yet
not a complete brick yet is in loader mode red,blue ,green screen

All the cingular roms are here ftp://[email protected]/Wizard/Roms/Cingular/
user name xda password xda
which rom do you have?
It looks like you are in bootloader (multicolored) mode so that is good
connect via usb - you dont need to activesync to update rom. You should get a usb sign bottom left of screen and then start update.

Upgrading without activesysnc
After a interruptus ROM upgrade my s200 d'ont start . after the HTC i have a white screen but not more.
The activesync don't connect and i can't put the ROM another time.
I obtain the multicoloured screen with usb in the left botton.
Please, could anybody help me to update the rom in this situation , mayby without activesync ??
Regards.

You can flash a rom from the 3-colored bootloader mode (hold voice button when turning device on). When it says usb you can just flash without activesync.

Yes thank's i found a ROM that don't need activesync , after that i had changed that rom by my rom and at the moment my s200 y ok.
Thank's.

critical problem in jamin for help please

My friend's jamin when he tried upgrading with smart1 wm6
after the flashing process finished it gives the 3 colors of boot loader
the screen flickers continously with the 3 colors
no way to hard reset the device
and activesync doesn't feel it
I searched all the forum for a problem like this but I didn't find any
any suggestion please, or any help?

Flash NVID Rom and try Smart again. Read WM6 upgrade Manuel and readme for the ROM.

NetrunnerAT said:
Flash NVID Rom and try Smart again. Read WM6 upgrade Manuel and readme for the ROM.
Click to expand...
Click to collapse
Please how can i flash with the activesync doesn't notice my device and where's NVID Rom
Ok. I'll search for it but please help how can I flash it to the device which doesn't recognized or felt by PC

If your device is in bootloader mode, activesync cannot recognize it but this is normal. Jamin is recognize only as a usb device and you can downgrade it to NVID rom easly.
Then you could upgrade your favorite rom, I suggest PDAVIET 4.0.0.1
Bye for now

divxmaniak said:
If your device is in bootloader mode, activesync cannot recognize it but this is normal. Jamin is recognize only as a usb device and you can downgrade it to NVID rom easly.
Then you could upgrade your favorite rom, I suggest PDAVIET 4.0.0.1
Bye for now
Click to expand...
Click to collapse
I think I didn't discuss the problem well
The Problem is when I start to flashing a rom a message tells that check if the usb is connected and if the device is connected .
This is happen with the device is connected to the cable and the tricolor screen is flicking . and the device doesn't open doesn't flashing.

must use NVID rom. maybe qtek nvid one from here? http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs

hasanemara said:
I think I didn't discuss the problem well
The Problem is when I start to flashing a rom a message tells that check if the usb is connected and if the device is connected .
This is happen with the device is connected to the cable and the tricolor screen is flicking . and the device doesn't open doesn't flashing.
Click to expand...
Click to collapse
If the problem still there, Try to release the battery for 1-3 hours and put it again to the device, go to the boot loader and pray. Hopefully it could work. Actually, this way worked on my Himalaya and Prophet.

Just run the "Step 1" component of the PDAViet ROM (http://rapidshare.com/files/32728615/Prophet_PDAViet_Step1.zip), which is just a plain AKU 2.20 NVID. This will find your device even if its in bootloader mode (it doesnt depend on activesync). Just flash it with that sucker and you should have a working phone on WM5, then you can safely upgrade it to WM6 (or leave it if you like).

ekto said:
Just run the "Step 1" component of the PDAViet ROM (http://rapidshare.com/files/32728615/Prophet_PDAViet_Step1.zip), which is just a plain AKU 2.20 NVID. This will find your device even if its in bootloader mode (it doesnt depend on activesync). Just flash it with that sucker and you should have a working phone on WM5, then you can safely upgrade it to WM6 (or leave it if you like).
Click to expand...
Click to collapse
I shall try and tell you the result

error 260 this is the result

i have a slight variation problem like this...
1. i was upgrading my O2 Neo to the latest WM05 & the phone went to bootloader mode & the upgrade started searching for the phone as normal..then some error & it stopped upgrading while the phone was in bootloader mode..
2. at that time,i got an urgent call & had to leave the phone in bootloader mode...
3. when i came back..the phone was dead & now it wont startup at all.. not even in the bootloader mode.
4. Maybe the batteries dead...so i charged it (Over night)..nothing happened in the morning..
5. kept the battery removed for about 5-6hours & still nothing happens..it simply does not startup.
6.I've tried holding the camera button & resetting, but it wont go into bootloader mode.
7. i;ve tried holding the connections button + camera button _ reset but it wont hard reset...
can anyone help me here...
what can i do???

hasanemara said:
error 260 this is the result
Click to expand...
Click to collapse
Error 260... If i remember correctly that's "cant find device" or something.
Few things to check:
Is the PC you are upgrading on running windows vista?
If so, use a different PC running windows XP.
Have you tried a different USB cable?
If not, do so, this tends to be the cause of problems like this.
Have you checked device manager?
Go to control panel, Administrative tools, computer management, device manager and see if you can find your device. If it has a yellow ! icon on it or is listed as "Unknown device" or anything like that then you may need to reinstall the drivers (int hsi case the easiest way to do that is to reinstall activesync). If everyhting is working properly it should show up as "HTC USB Sync", "PocketPC USB Sync" or something like that under the heading "Mobile Devices".
Have you just plain tried another computer, regardless of the OS?
I found that I could never get my phone to flash on my laptop, but it worked without a problem on my desktop. This is not to say laptop's cant do it, it simply means some computers just have problems like (in my case i believe) no USB 2.0, or too low-powered USB ports.

ekto said:
Error 260... If i remember correctly that's "cant find device" or something.
Few things to check:
Is the PC you are upgrading on running windows vista?
If so, use a different PC running windows XP.
Have you tried a different USB cable?
If not, do so, this tends to be the cause of problems like this.
Have you checked device manager?
Go to control panel, Administrative tools, computer management, device manager and see if you can find your device. If it has a yellow ! icon on it or is listed as "Unknown device" or anything like that then you may need to reinstall the drivers (int hsi case the easiest way to do that is to reinstall activesync). If everyhting is working properly it should show up as "HTC USB Sync", "PocketPC USB Sync" or something like that under the heading "Mobile Devices".
Have you just plain tried another computer, regardless of the OS?
I found that I could never get my phone to flash on my laptop, but it worked without a problem on my desktop. This is not to say laptop's cant do it, it simply means some computers just have problems like (in my case i believe) no USB 2.0, or too low-powered USB ports.
Click to expand...
Click to collapse
No I didn't change any and I can connect my o2 xda mini to the same cable
I want to ask few technical question
HOW CAN A SOFTWARE DAMAGE THE DEVICE?
CAN A SOFTWARE FOR EXAMPLE BURNS A PROCESSOR OR SOMETHING LIKE THIS?
If So there will be a big problem with those types of devices
a virus for example can destroy my device's board or processor!!
Yesterday My friend went to an I-mate customer service who tel him that
the board had been destroyed by the bad software !!!!!!!!!
Please Give me technical advice about this problem
and is there a web site for him to buy this board (i-mate jamin)?

I've tried everything... even tried it on my desktop... but my phone just wont turn on now. i've kept the battery removed for more than 8hrs now... i've even charged it for more than 8hrs non-stop..nothing happens..
maybe i should get hold of a charged battery & try it with that battery...?
Any clue how to get my phone started??

got it working !!! PHEW... i used my HP battery which was charged & put it into it..now i've got my bootloader & i'm installing the new OS as we speak... 15% done.... keeping my fingers crossed

done.. got my HP Ipaq battery , which was charged & my new started up in bootloader more.. PHEW !!!
66% done... keeping my fingers crossed

ok, installed...now, one more problem..my touch screen's not working...???
Any idea what to do?
i installed "Prophet_PDAViet_Step1"

HTC P3300 can´t connect with ActiveSync

I cannot switch on my device. When I tried hard reset it stucks at bootloader. so tried to enter boot mode (red green blue screen) and reinstal rom. it starts and look it works properly but instalation of new room is not completed (error 270). have read simmilar topics in forums and it seems it´s because device is not connected with activesync. any ideas how to fix? please don´t say I have a brick

Cannot connect
Use the original cable supplied by HTC. There seems to be an issue with other cables.
sanjeev

Are your really using ActiveSync or Mobile Device Center?
In bootloader mode when connected via USB, can you read "USB" on the Bottom of the Display?

to both questions I can say yes. but nothing happens. it seem pc doesn´t recognize device.

ypsilonq said:
to both questions I can say yes. but nothing happens. it seem pc doesn´t recognize device.
Click to expand...
Click to collapse
Opens activesync at the PDA and the go to connections settings. (menu->connections).
See if USB connection is selected there.
Cheers

thank you. I tried what you suggest but no change :-(

is the error you got when flashing the original HTC ROM?
if not download it from the official HTC site and then flash it using SD card flash (for more info about see the wiki)

finally fixed!!!!!!!!!!!!
I find original rom (t-mobile) and followed instructions from link provided by y_bother. big thanks !!!

Dead Wizard, please help

Few days ago my Wizard died all of a sudden. When turned on it only gets to the point when it shows "HTC smart mobility" and stays there. So not even to the screen with IPL, SPL. I tried soft/hard resetting, playing with battery but it was all no go, same.
I can get to the red-green-blue bootloader screen however, shows IPL 3.08, SPL 3.08. If i connect via USB cable to computer, bootloader screen shows "USB" on bottom. The ROM on the device was TNT's (not sure which version), Windows Mobile 6.1. It worked for ages without any problems with this ROM before this.
ActiveSync does not recognise Wizard at all, I cannot establish connection and therefore downgrade/upgrade the ROM becouse upgrade programs (for exmaple with ROM got originally with the device) say they cannot contact the device.
What are my options, please help.

hy
in my opinion , it is normal for active sync to not recognize your phone , because it's not turn on properly ,i mean it only recognize the phone when you enter windows mobile.
if i were you i would try to flash any rom i like and see if it works. i hope this helps

But ROM upgrade/downgrade program requires ActiveSync connection to run and I can't establish it...How to solve the situation, please advise?

when you are in bootloader screen and your phone is connected to the pc by usb cable just start the downgrade/upgrade program and it should work.

i did that. rom update utility complains that it cannot connect with mobile...
that was tried with:
1. official t-mobile ROM that was on the device when I got it
2. CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE ROM
my IPL and SPL versions now are 3.08

sorry , i can't think of anything that might help you.

same problem
phones a brick.
I can get to the bootloader , i can even perform a succesful hard reset.
But it doesnt get recognized by the computer in bootloader mode. is there any way to flash the rom if the computer doesnt recognize the device?
regards

Try this look for nbd v8.1 or v8.3 .
hold the camera button and do a soft reset but keep holding the camera button until the 3 color screen comes up it should sync your phone then run the nbd rom or original cingular ship rom like this one ** RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1 ** i prefer original then other but that's me. Hope this help you.

Can't Flash HD2

Hi, i am proud to say i have a hd2 in my "pocket" but i have a little problem.
I successfully flasht my rom to Artemis v18.0. but then i encountered THE problem, my active sync wont work, so i thought i just flash it to energie rom or something like that. but if i cant connect to my phone then its gonna be difficult to flash.
so,.. i heard something about flashing from your sd card ?. i have a 8 gb microSD.
is that even possible or do i just need to brick my phone ?
Thanks in advance.

you dont need to be connected to active sync mate put the phone in bootloader turn off usb connections in active sync and connect the phone to the pc should change from serial to usb if it does you can flash,
just a quickie though did you uncheck the in youre phone in usb to pc the active sync enable faster sync

Demon_man said:
you dont need to be connected to active sync mate put the phone in bootloader turn off usb connections in active sync and connect the phone to the pc should change from serial to usb if it does you can flash,
just a quickie though did you uncheck the in youre phone in usb to pc the active sync enable faster sync
Click to expand...
Click to collapse
Uhm no i did not, why? is that just a useless option?
and im now in the bootloader, and it does indeed says serial in the bottom, but how does the phone knows what rom it needs ? do i need to copy the rom to the sd card or something ?

ok the reboot youre phone connect it to active sync and untick the box before you flash mate it could be your problem, if not come back and ill help ya

Hmm i unchecked the faster data sync, and rebooted and then tried to connect, but both the phone & wmdc seems to do nothing. weird problem.
and it gets wors, cuz i dont have an card reader on my pc. so i also cant copy the rom to the SD card.

1.ok so you download the ROM you want,
2.then restart you're phone in bootloader mode (turn phone on while holding vol down) phone should say serial
3.in active sync on the pc go to connections and disable usb connections
4.plug your phone into the usb serial should change to usb if it does youre set to go
5.if all above ok you would open the RUU that came with the ROM you downloaded and follow the instructions from there to flash again,
I'm guessing you have a hspl or one of the others as you have laready flashed you're device

okay its flashing now.. , i followed the steps you provided and it worked. and i have hspl 2.08 , anyways thanks for your time & help, much appreciated m8.
Greetz KapiteinKoek007

No probs hope active sync gets sorted

Hmm i flashed it to energie rom, and now when i call or when im called and i answer the phone freezes & reboots :S, any suggestions ?

KapiteinKoek007 said:
Hmm i flashed it to energie rom, and now when i call or when im called and i answer the phone freezes & reboots :S, any suggestions ?
Click to expand...
Click to collapse
did you hard reset after flashing?
if I was on your case and HR didn't help, i would perform a task24 cleaning and then flashing (always doing a HR after the flashing)
hope that helped.

task 29 !!

okay, im gonna trie that, thanks!

Demon_man said:
task 29 !!
Click to expand...
Click to collapse
29 sorry