where do i get the XDA manipulator
http://wiki.xda-developers.com/index.php?pagename=XDAmanipulator
Thank you very much LumpiStefan for your timely response and for the link to get the XDA manipulator, i have been looking for it for so long. THANKS DEVELOPERS
I too appreciate the link, I have been searching for this for ages. Cheers.
.......Ib a n e
I really appreciate the link thanks
BR
wallaby usb flashing
hi there ,,can anyone tell why when i enter usb flash mode i cant flash via it wheni try to run a upgrade program it says plug in yor pda and on the pda screen all i get is usb flash mode,,connect usb cable now... but it is lso in my device manager i see my pda as a windows ce devices so what the hell is going on ?
pls dont tell me only way is via sd card surely it can be done via usb lead if so please can some post a step by step on how to flash via usb as i did so already from pc2002 to win2003 using the rom from xda developers and now i get a logo Ozup and underneath says ,,this os image is meant for microsoft employees or technicians bla bla bla
but i can enter boot loader fine access all the menus in bootloder my bootloder version is v5.15
pleaaaase someone help me
There are two possibilities to flash a device:
1. In Bootloader via SD Card
2. Normal booted device via Active Sync
But i do not know what you mean with USB Flash Mode
Stefan
thanks for replying back now i have new problem
i have a big problem and i think your the only person who can help me my problems occured when i went to flash my wallaby device with this rom ftp://xda:[email protected]_ENG.exe/
i wish i never bothered the device was perfectly running fine until i flashed it with this via usb it all was a succes when i done a hard reset i got a screen with a oz up logo and underneath it says "microsoft internal use only" this operating system image is meant for use only by microsoft employees and contractors ,,and the crazy thing is i cannot enter my bootloader which was v5.15 so i can flash it via sd card its vanished no bootloader only that screen and on the bottom right corner it says ,,g32s54,v4.08,3.04 when i plug it in usb all i get is a unknown device and i cannot flash it so please if there is a way even if its pretty technical i would be honoured if you can help me out i would be very grateful if u cn show me a way of getting the bootloader back many thanks
still no bootloader on my wallaby device
hi i,m really upset if i can only get acces to the bootloader i can atleast flash it via sd card so please if theres a way of getting back the bootloader or somehow flashing it back please any help would be appreciated
radio stack
had same sort of problem this is how i fixed it go here
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
don't use the 4.16 use the rs 4.21 when i did the upgrade i was then able to connect to active sync then changed the rom try the special rom 1.2
hope this helps
mate the problem i have is that i cant acces the bootloader for me to do anything its gone and this happened after using that dodgy rom
all i want to no is there a way of putting back the bootloader on to the device as its not there its been somehow erased after the flash i done
mate if you try what i said to try this should help you to connect your phone back to your pc then you can change the rom from there you shold get bootloader back when you put a new rom on
Related
Hi eveyone!
I've tried to upgrade my XDA to WM2003 (4.01.16 ENG form T-Mobile). Now I cannot access to my bootloader and GSM doesn't work.
Is there any chance to fix my XDA? Is there any softawre to restore bootloader?
I would be really appreciate for help.
Tom
if the bootloader is broken then
http://wiki.xda-developers.com/wiki/XDAtools
look at the first picture
Do you think it'll work, even though I cannot connect via Activ Sync???
what do you get when trying to access the bootloader screen ?
Nothing, beacuse I simply cannot access bootloader. When I do soft restart with holding the power button, it doesn't bring me to bootloader screen.
Is it possible that I had deleted Bootloader??? How can I restore it?????
Please help me, beacuse I can't afford to by a new device.
I do appreciate every hint.
Regards
AFAIK device still works so there is a possibility to upgrade it by copying sth into device using MMC or SD card. If I feel right about the reason of problems mensioned above he have to change Radio Stack and he can do this by MMC transfer and exe method. Maybe some of U can provide some link to working RS with good readme included...
Wiltom said:
Is it possible that I had deleted Bootloader??? How can I restore it?????
Click to expand...
Click to collapse
Yes, if you still can sync with your xda, run the fixbootloader.bat from \xdatools\binaries on your PC
I followed instructions (http://forum.xda-developers.com/showthread.php?t=244549), and I executed 3.17.03_ENG.exe after xdaunlock.exe failed.
My device is now unusable, some error occured regarding usb connection and now all I have on pocket pc is upgrading bar with 0%.....cant reset cant do anything?!?
Please help!
If I understand corectly I need to put boot on my sd card.....
look here
this might help http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
thnx....and....where can I find rom image?
http://www.romkitchen.de/
no bootloader on wallaby
hello again ,,to jay05 thxs for replying back but u dont seem to understand what i am saying i will say it more clearly hopefully someone can help ,
ok there is no bootloader on the device its been erased when i do a hardreset nothing happens so can someone please tell me how to put back the bootloader on the device ,,its impossible via sd card and when i connect it via usb cable all i get in my device manager is a usb device as"HTC USB SYNC"
ok so there must be software that can somehow flash this pda as the computer recognises it as a htc usb sync ,,i done a search on google and found several software that runs on similar setups like the treo but none for wallaby so please someone there must be a way to upload the bootloader back to the device via usb cable pls someone help me out i also tried the xda developer tool pnewbootloader no use nothing happens
there must some kind of special HTC software that can flash the chips on the pda similar to the jtag technique but thru usb as again i repeat my comp sees the pda as a htc usb sync
i hope someone can help
many thanks and a happy new year
anymore. :--(
Yesterday i^ve make a setup for the ext_rom but with a wrong update. It was been not for the Artemis..my fault.
Now i see only th et-mobile start screen and no more.
What can i do? Thanks in advance..
hmm, please flash your p3300 whith the original software with hope that it will be alive again. otherwise you can take an hardreset on your phone but i'm sure that there will not happened.
is your PDA an original fom HTC or from any other Provider?
it`s from t-mobile
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
dr.moppi said:
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
Click to expand...
Click to collapse
hello there!. i have the same problem, did you manage to get a usb connection? i can't flash it...
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
arvind09 said:
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
Click to expand...
Click to collapse
Please tell me how can i get the t-mobile stock rom or can you give me the link, thanks
Shipped ROM's in English - http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
To get into bootloader - hold down the record/voice command button (top left along the side of the phone) and use the stylus to press the recessed reset button on the lower left side of the phone (same side as the other boutton you hold down) Keep holding the record button as you hit and release the reset button, you will eventually see a screen with color bars on it. At this point you will be able to get a USB connection, but not an active sync. Try to start the ROM file when the phone is in this state and connected to your computer.
What is the original language/carrier for your phone?
MDA Compact III stops in T-mobile logo screen
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Hi I have the same problem. I have the B&B3.7 and get stuck in the splash screen. I could enter to the bootloader mode and use some commands of the mtty.
I have my old rom, how may i load it to the pda? I have a SD and a tytn to load something in it.
Thanks!
Hernan
ftsv said:
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Click to expand...
Click to collapse
run uspl first!!! you can then run installation from any provider of your choice.
http://forum.xda-developers.com/showthread.php?t=311403
USPL cannot be run if your phone is stuck into bootloader?
It starts counting, askts to copy the same information again several times, and get stuck at 50... how is this possible, anyone has the original HTC Dutch rom ? May be the WM5 also! Thanks!
same problem but with no display
i have done the same mistake
have tried to upgrade my T-MOBILE MDA COMPACT III(aka htc p3300) with the HTC TOUCH ROM
it started to upgrade and an error occured
then i have lost the display and all
when i connect it to my laptop using USB i hear a beep in my computer but active syn didnt find any device
i dont know what to do now..please help me it has to be recovered
there must be some way pls pls anyone help me to get my working phone back
will appreciate your concern
thanks
Regards
Faraz Feroz
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
y_bother said:
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
Click to expand...
Click to collapse
thanks Y_Brother
i have downloaded the new rom but it doesnt seem to work too
I have just bought a singapore Sim locked handset .. I need to Flash a english rom and unlock it .. i have downloaded the rom the Hard spl but before that i was trying to update using SEUS but it went to the bootloader mode and itdetected the drivers then suddenly says one of the usb is malfunctioned and cannot reconize the device now i have tried 3 systems but nogo...i need help to get hardspl installed without using the usb port and a computer and then i can flash a eng rom on it using msd card.. and i have tried hard reset/chking in bootloader mode/and active sync also not working
have you try this?
Program --- Setting -- Connection ---USB to PC
clear ..... Enable advanced network funcionality
(Clear this check box if Activesync does not recognize the device)
goodluck
Or flash it with a generic ROM using the microsd method.
EDIT: Never mind. Read the first post too quick.
Thanks a lot .. it worked .....i unchecked it and it worked i have a english version of it now ..now one more problem left is simlock any solutions for that???? thnks a lot for helping me appreciated
hi anyone pls help,
i have one imate jasjam, the initial problem is i done a hard reset and the phone reboot and it wont finish running the customise application installation, after that the phone cant detect network, i had run a hard spl into the phone and then try to flash a rom that i download from forum but it only run 11% then stop then i realise that the rom i flash is for htc jasjam not imate jasjam, now my phone can only stay at the boot loader mode, i also try different rom but no luck so i think i ask for your help
here is my device details at the boot loader mode
IPL-1.04
SPL-2.10.01ipro
before i flash it i also cant find any radio rom version in this phone so i guess the radio rom also missing or what just not sure....
i think i flash the htc jasjam wrong model rom even now i flash back the original JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship this error message come out "ERROR [260]: update error" and it ask me to check my usb connection.
i search the forum and few member advice me to use mtty and i did tried that many time it didnt work, another member advice me to use this method "Formate yr memorycard & Unzip attached file in your memorycard named Hermimg.nbh & put yr cell in boot mode & follow screen instructions..........this illl boot yr celll out to boot mode......... " i tried that but the phone always stay at boot mode and no other instructions came out at all so im really lost and just hoping somebody can help me solve this problem...
can anyone pls guide me step by step of how to flash this phone back to normal, your help is much appreciated, many thanks.
Hi, i had the same problem flashing from the SD card. Are you using Vista or Windows7? I tried with Vista Format card, drag and drop renamed image onto sd card. Stuck it in the phone, reset and like you say hangs on bootloader. Then i tried the same thing from my Windows XP laptop, exactly the same format, rename drag and drop and everything works fine. Hope this helps
first i tried with vista then i tried with xp the problem still there, any other idea to solve this problem? thanks anyway for your advice
roms?
G'day, I've only really been reading about roms and these phones for only a few hours but I'm pretty sure that htc jasjam and imate jasjam are one and the same phone i think the said rom are used with all hermes type phones..
thanks and sorry for my ignorance if i'm mistaken