Hi eveyone!
I've tried to upgrade my XDA to WM2003 (4.01.16 ENG form T-Mobile). Now I cannot access to my bootloader and GSM doesn't work.
Is there any chance to fix my XDA? Is there any softawre to restore bootloader?
I would be really appreciate for help.
Tom
if the bootloader is broken then
http://wiki.xda-developers.com/wiki/XDAtools
look at the first picture
Do you think it'll work, even though I cannot connect via Activ Sync???
what do you get when trying to access the bootloader screen ?
Nothing, beacuse I simply cannot access bootloader. When I do soft restart with holding the power button, it doesn't bring me to bootloader screen.
Is it possible that I had deleted Bootloader??? How can I restore it?????
Please help me, beacuse I can't afford to by a new device.
I do appreciate every hint.
Regards
AFAIK device still works so there is a possibility to upgrade it by copying sth into device using MMC or SD card. If I feel right about the reason of problems mensioned above he have to change Radio Stack and he can do this by MMC transfer and exe method. Maybe some of U can provide some link to working RS with good readme included...
Wiltom said:
Is it possible that I had deleted Bootloader??? How can I restore it?????
Click to expand...
Click to collapse
Yes, if you still can sync with your xda, run the fixbootloader.bat from \xdatools\binaries on your PC
Related
HELP.... I was unable to upload my sx56 with the new 2003. I crashed my ROM... Any ideas on how to restore.
Rock
Tell me what you see from the display.
I can help!
Froozen SX56 while upgrading the ROM
Unfortunately my system crashed when i was upgrading my ROM this is for a AT&T SX56 Pocket PC which I wanted to unlocked so that I could use it with T-Mobile SIM card. Now the screen says :
Upgrading
It will take about 5 minutes...
I was trying to upgrade it with the xda-developer rom verison.
I dont have any backup also for this device please help and I do have a SD card and SD card reader also.
If the bootloader not be erased, you could still use SD to restore OS.
If the bootloader already damaged, the only solution is hardware solution.
I can help you to resolve all problems
How to restore using the SD please tell me.
I do get the bootloader mode when i pressed the power , navigator and reset button on the pda
shri62 said:
How to restore using the SD please tell me.
I do get the bootloader mode when i pressed the power , navigator and reset button on the pda
Click to expand...
Click to collapse
using Xdrit to write the OS to SD card via SD writer.
you can get Xdrit from xda-developers.com (do some search).
Need real help
cgigate said:
I can help you to resolve all problems
Click to expand...
Click to collapse
I had this stupid RadioStack crash that resulted in GSM ERROR that made my device unable to recharge the battery or run mobile function, so the status now is a ppc which has no phone and should always be conected to AC
when I consulted the Agent service tey claimed it's a motherboard error that would require a new baord, which'll cost me around 300$.
could you please help me!!
Cgaigate, is it possible to restore a corrupt radio stack using jtag, if you have the capability I can let people know.
GSM ERROR - RADIO STACK CRASH
Hi Smiley,
I crashed my Radio Stack, too. Has anyone an idea? Is it possible to repair? By myself?
I heard cgigate could help?
Bye
Yep - "GSM Error" in Wallaby Bootloader 5.15
Anyone got any ideas on fixing this one?
Cheers!
Andy
where do i get the XDA manipulator
http://wiki.xda-developers.com/index.php?pagename=XDAmanipulator
Thank you very much LumpiStefan for your timely response and for the link to get the XDA manipulator, i have been looking for it for so long. THANKS DEVELOPERS
I too appreciate the link, I have been searching for this for ages. Cheers.
.......Ib a n e
I really appreciate the link thanks
BR
wallaby usb flashing
hi there ,,can anyone tell why when i enter usb flash mode i cant flash via it wheni try to run a upgrade program it says plug in yor pda and on the pda screen all i get is usb flash mode,,connect usb cable now... but it is lso in my device manager i see my pda as a windows ce devices so what the hell is going on ?
pls dont tell me only way is via sd card surely it can be done via usb lead if so please can some post a step by step on how to flash via usb as i did so already from pc2002 to win2003 using the rom from xda developers and now i get a logo Ozup and underneath says ,,this os image is meant for microsoft employees or technicians bla bla bla
but i can enter boot loader fine access all the menus in bootloder my bootloder version is v5.15
pleaaaase someone help me
There are two possibilities to flash a device:
1. In Bootloader via SD Card
2. Normal booted device via Active Sync
But i do not know what you mean with USB Flash Mode
Stefan
thanks for replying back now i have new problem
i have a big problem and i think your the only person who can help me my problems occured when i went to flash my wallaby device with this rom ftp://xda:[email protected]_ENG.exe/
i wish i never bothered the device was perfectly running fine until i flashed it with this via usb it all was a succes when i done a hard reset i got a screen with a oz up logo and underneath it says "microsoft internal use only" this operating system image is meant for use only by microsoft employees and contractors ,,and the crazy thing is i cannot enter my bootloader which was v5.15 so i can flash it via sd card its vanished no bootloader only that screen and on the bottom right corner it says ,,g32s54,v4.08,3.04 when i plug it in usb all i get is a unknown device and i cannot flash it so please if there is a way even if its pretty technical i would be honoured if you can help me out i would be very grateful if u cn show me a way of getting the bootloader back many thanks
still no bootloader on my wallaby device
hi i,m really upset if i can only get acces to the bootloader i can atleast flash it via sd card so please if theres a way of getting back the bootloader or somehow flashing it back please any help would be appreciated
radio stack
had same sort of problem this is how i fixed it go here
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
don't use the 4.16 use the rs 4.21 when i did the upgrade i was then able to connect to active sync then changed the rom try the special rom 1.2
hope this helps
mate the problem i have is that i cant acces the bootloader for me to do anything its gone and this happened after using that dodgy rom
all i want to no is there a way of putting back the bootloader on to the device as its not there its been somehow erased after the flash i done
mate if you try what i said to try this should help you to connect your phone back to your pc then you can change the rom from there you shold get bootloader back when you put a new rom on
anymore. :--(
Yesterday i^ve make a setup for the ext_rom but with a wrong update. It was been not for the Artemis..my fault.
Now i see only th et-mobile start screen and no more.
What can i do? Thanks in advance..
hmm, please flash your p3300 whith the original software with hope that it will be alive again. otherwise you can take an hardreset on your phone but i'm sure that there will not happened.
is your PDA an original fom HTC or from any other Provider?
it`s from t-mobile
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
dr.moppi said:
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
Click to expand...
Click to collapse
hello there!. i have the same problem, did you manage to get a usb connection? i can't flash it...
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
arvind09 said:
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
Click to expand...
Click to collapse
Please tell me how can i get the t-mobile stock rom or can you give me the link, thanks
Shipped ROM's in English - http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
To get into bootloader - hold down the record/voice command button (top left along the side of the phone) and use the stylus to press the recessed reset button on the lower left side of the phone (same side as the other boutton you hold down) Keep holding the record button as you hit and release the reset button, you will eventually see a screen with color bars on it. At this point you will be able to get a USB connection, but not an active sync. Try to start the ROM file when the phone is in this state and connected to your computer.
What is the original language/carrier for your phone?
MDA Compact III stops in T-mobile logo screen
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Hi I have the same problem. I have the B&B3.7 and get stuck in the splash screen. I could enter to the bootloader mode and use some commands of the mtty.
I have my old rom, how may i load it to the pda? I have a SD and a tytn to load something in it.
Thanks!
Hernan
ftsv said:
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Click to expand...
Click to collapse
run uspl first!!! you can then run installation from any provider of your choice.
http://forum.xda-developers.com/showthread.php?t=311403
USPL cannot be run if your phone is stuck into bootloader?
It starts counting, askts to copy the same information again several times, and get stuck at 50... how is this possible, anyone has the original HTC Dutch rom ? May be the WM5 also! Thanks!
same problem but with no display
i have done the same mistake
have tried to upgrade my T-MOBILE MDA COMPACT III(aka htc p3300) with the HTC TOUCH ROM
it started to upgrade and an error occured
then i have lost the display and all
when i connect it to my laptop using USB i hear a beep in my computer but active syn didnt find any device
i dont know what to do now..please help me it has to be recovered
there must be some way pls pls anyone help me to get my working phone back
will appreciate your concern
thanks
Regards
Faraz Feroz
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
y_bother said:
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
Click to expand...
Click to collapse
thanks Y_Brother
i have downloaded the new rom but it doesnt seem to work too
Hi guys, you have been a great help to me so far, but I just can't find anythign to help me with this now. I have a hermes100 with WM6 and i just flashed the radio to 1.54.07 and it gave me an option for hardSPL and said that it was recommended so i investigated and found the upgrade for it.
I ran the wrapper file and it goes to the stage where it puts my hermes into flash mode but it displays "spl1.09" on the screen yet when push the ok and power keys during reset it shows "spl2.03"
it goes through the screens until it puts my phone into flash mode and it says it is trying to read my device then i get error code (260) that it isnt connected. Anyone know a way to fix this?
Use sd card method, page 116 on here: http://forum.xda-developers.com/showthread.php?t=296722
Hope this helps...Cheers...
okay, i tried the sd card method and it does the same thing. after it gets to the bootloader screen i just sits there with
"HERM100
IPL-SSPL by des
HERM 100
SPL-109.ds
serial"
okay, nevermind, i just had to reinstall the drivers for when i was in bootloader mode. I got it to work, thank you for you help.
cheers :-D
No problem, now you should be able to flash any hermes rom to your hearts content with the knowledge you have a safety net if something does(and probably will, as you'll find flashing addictive, sooner or later) go wrong. Pleae remember though that Hard SPL ISN'T a guarantee that you will be able to fix you phone, it just makes it easier when something goes wrong... Cheers....and happy flashing...
samterry1234 said:
okay, nevermind, i just had to reinstall the drivers for when i was in bootloader mode. I got it to work, thank you for you help.
cheers :-D
Click to expand...
Click to collapse
how did you do this?
does anyone know how to upgrade the bootloader on the himalaya at the moment mine reads at the top of the screen SERIAL and at the bottom V1.01.
I have a file which i think is a upgrade [boot_1.06.nb0]
but i have to need to know the do's and dont's as i would think this would be if done wrong brick my himalaya?
any help or links would be thankfull?
advanced15 said:
does anyone know how to upgrade the bootloader on the himalaya at the moment mine reads at the top of the screen SERIAL and at the bottom V1.01.
I have a file which i think is a upgrade [boot_1.06.nb0]
but i have to need to know the do's and dont's as i would think this would be if done wrong brick my himalaya?
any help or links would be thankfull?
Click to expand...
Click to collapse
The only one question is
Why the hell you want to do that?
I have 1.01 also on my second today-use himalaya and it is really stable and works same as 1.06, but has some debugging output in mtty which is so useful
I tried also to upgrade it and I failed.
I have an O2 XDA II with windows mobile 2003 on it.
When in Bootloader Mode it says v1.01
when connected to the PC it says USB so i know its working in its own little way
I am trying to upgrade it to windows mobile 6.5.
I have tried everything so far and searched forums and tried things suggested on them but i just cant seem to do it.
Can someone send me a guide on how to do it please.
id be very greatful.
Thanks in advance.
mikeymcmk said:
I have an O2 XDA II with windows mobile 2003 on it.
When in Bootloader Mode it says v1.01
when connected to the PC it says USB so i know its working in its own little way
I am trying to upgrade it to windows mobile 6.5.
I have tried everything so far and searched forums and tried things suggested on them but i just cant seem to do it.
Can someone send me a guide on how to do it please.
id be very greatful.
Thanks in advance.
Click to expand...
Click to collapse
Hay mickey tell me that are you able to sync data or contects,msgs etc with system without disconnecting ?????????
or sometimes connection disconnects automatically ????/
if yes then put something stable thing in between data cable & device.
reply soon
KAASHP said:
Hay mickey tell me that are you able to sync data or contects,msgs etc with system without disconnecting ?????????
or sometimes connection disconnects automatically ????/
if yes then put something stable thing in between data cable & device.
reply soon
Click to expand...
Click to collapse
if anybody have same problem do as per my suggestion
put something in between data cable & device if you connect it without disconnection then it works flash the rom after putting it in bootloader mode
Don't do it
the bootloader is the main program which executes the system programs so avoid to upgrade bootloder.
the result will be permanent damage to your lovable device...
it can't boot more. so be careful.
no need to upgrade it as per my suggestion.