my prophet is snot recognized by the usb
there isn't any reaction that the ppc is connected with the usb
please help.........
read here I had the same problem http://forum.xda-developers.com/showthread.php?t=353547 if it's it not for flashing a New rom then try disableing your antivirus and see if that helps are change the option from accept all usb connections de select it in active sync and try it again ok if that dont work plz post a reply ok
thnx 4 the reply
but my prophet cant even be readable on the pc to download a new rom when i connect it there is no any reflection that there is a new usb device connected while the usb workin well i tried it with any other usb device and i tried my propchet onmore than one pc
Well if you need to install a new Rom follow the instructions in the link I give you we all have that same problem just try to flash it thats the only solution I can give here do it ok http://forum.xda-developers.com/showthread.php?t=353547
Additional RECOVERY steps for 3 colors screen boot-up after flashing...
a. Force Bootloader Mode MANUALLY Then flash PVtemp or NVID for prophet( P.S. the boot up screen will be changed to Qtek...),
b. ( Optional) Use Lazy_Tool to upgrade to WM6.1 (default rom is Cloudyfa's 19213-clean, you may change if you want...)....^_^,
Thats what I did and the pc did not even find the usb but I still got it flashed try it again ok And please post your results ok
Related
I followed instructions (http://forum.xda-developers.com/showthread.php?t=244549), and I executed 3.17.03_ENG.exe after xdaunlock.exe failed.
My device is now unusable, some error occured regarding usb connection and now all I have on pocket pc is upgrading bar with 0%.....cant reset cant do anything?!?
Please help!
If I understand corectly I need to put boot on my sd card.....
look here
this might help http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
thnx....and....where can I find rom image?
http://www.romkitchen.de/
no bootloader on wallaby
hello again ,,to jay05 thxs for replying back but u dont seem to understand what i am saying i will say it more clearly hopefully someone can help ,
ok there is no bootloader on the device its been erased when i do a hardreset nothing happens so can someone please tell me how to put back the bootloader on the device ,,its impossible via sd card and when i connect it via usb cable all i get in my device manager is a usb device as"HTC USB SYNC"
ok so there must be software that can somehow flash this pda as the computer recognises it as a htc usb sync ,,i done a search on google and found several software that runs on similar setups like the treo but none for wallaby so please someone there must be a way to upload the bootloader back to the device via usb cable pls someone help me out i also tried the xda developer tool pnewbootloader no use nothing happens
there must some kind of special HTC software that can flash the chips on the pda similar to the jtag technique but thru usb as again i repeat my comp sees the pda as a htc usb sync
i hope someone can help
many thanks and a happy new year
Guys,
I ve just downloaded this http://rapidshare.com/files/21256078..._DUT_11500.rar romversion in the understanding that it was for the HTC 9000 PDA. There was a file called MaUpgradeUt_noID.exe which I let 'upgrade' my 9000. However, I think something very VERY big went wrong! A reset by pushing the 2 buttons and reset button on the back gives me the option 0 to reset but all I can see after that is a black screen which says USB at the top and at the bottom v1.00
What happened and is this the end of my PDA? Sync won t work anymore now since my PDA can t be detected by windows because I can t get in the PDA!!!
Is there something I can do??!!!
PLEASE HELP ME OUT!!!!
Edit/Delete Message
sounds like you're just in bootloader mode
I think you are in what's called bootloader mode. Read the wiki to check - the screen you are describing sounds normal to me you plug you device into the comp via usb (with sync over usb disabled in active sync) then install a new rom.
You really shouldn't have tried to flash your rom without reading some instructions first but I think that your device should be fine.
If you have already upgraded your rom just do a hard reset and select the option to reset.
Will this thread help?
http://forum.xda-developers.com/showthread.php?t=310056
I'm sorry, this is the thread I ment to link:
http://forum.xda-developers.com/showthread.php?t=310054
strangely enough I found out that I DID use a good version picked from this http://forum.xda-developers.com/showthread.php?t=298020 post. In this thread mwang gives a link to here http://buzzdev.net/index.php?option=com_phorum&Itemid=125&phorum_query=read,40,30486,30486#msg-30486 where I picked the dutch version. I than double clicked the MaUpgradeUt_noID.exe file and the software for upgrading started. When he was at 100% he said the the ROM update was completed and that I had to do a reset. So, I than pushed the three buttons (2x the - button and the reset button at the back of the 9000) but all I than see is the bootloader menu with USB and V1.00...........
Sorry for putting it in three sub forum, my fault, but the device is from my work so I don t want it to be screwed up!!!
sanderh said:
Sorry for putting it in three sub forum, my fault, but the device is from my work so I don t want it to be screwed up!!!
Click to expand...
Click to collapse
Rather late now, but if it's owned by your company for work, should you really be di**ing with it?
Solution to probl: Stuck in Bootloader
The one way of fixing your problems....you're officialy stuck in bootloader,
Here's the way to fix it:
1. Stop Activesync USB connection on your machine under connection settings.
2. Uni : Reboot Bootloader then Connect USB ( If your phone isn't in bootloader already..)
3. PC : Run mtty1.42.exe ( Download from XDA's ftp site or search the forums, I'm sure you'll find it.)
4. Choose USB in "Port" (Reconnect if can't find/reconglize USB and try remove sim and sd card)
5.1 Press Enter
5.2 USB> (This will show up)
6. Type: Set 14 0
7. Press Enter
8. Run your rom update again and it should flash this time.
did it start??
did it start?? ?
Hi. first post.
Have an o2 exec. Different brand same deice and none of the other methods worked but finally got it working. Using mtty1.42.exe it would not see usb connection and therefore could not go down that route.
I booted into the bootloader mode that says serial at the top and v1.00 at the bottom.
Connected to the pc and cant remember if i stopped wcescomm.exe or not but you can try both ways.
Then started Midget_1990_v1_0_PU10_WWE.exe rom and followed the instructions and voila.
Hope this helps someone.
"Using mtty1.42.exe it would not see usb connection"
You need to disable the usb connection of active sync under connection settings and then only mtty will pick up a usb connection..
Hi Wizards,
Im having a Qtek 9100 and using a ROM cooked by Mfraazz. The phone application seems to hang and i have to reset in order to make it functional...the problem does not end here. When the phone boots up, the start menu bar is not visible...I have to hard reset my device 3 -4 times..thats whn the start menu is visible..
I have only one application(Good Link) running...plz help me guyzz
it is time to donate to XDA-developers!
Just reflash the ROM, friend. Seems to be a bad flash to me.
deleted this post
wiztek said:
Hi Wizards,
Im having a Qtek 9100 and using a ROM cooked by Mfraazz. The phone application seems to hang and i have to reset in order to make it functional...the problem does not end here. When the phone boots up, the start menu bar is not visible...I have to hard reset my device 3 -4 times..thats whn the start menu is visible..
I have only one application(Good Link) running...plz help me guyzz
Click to expand...
Click to collapse
try another cooked ROM or an official one and see if problem persists...
the mfrazzz crossbow reloaded made my kjam hang on the bootloader as well n my fone cant b detected by active sync either plz help how m i suppose to flash another rom wen active sync itself dont detect my rom
z0d1ak said:
the mfrazzz crossbow reloaded made my kjam hang on the bootloader as well n my fone cant b detected by active sync either plz help how m i suppose to flash another rom wen active sync itself dont detect my rom
Click to expand...
Click to collapse
Rom has got nothing to do with Activesync not detecting your phone,it's most probably the problem of Activesync application or your USB cable not establishing connectivity.Check the usb connectivity for problems.To verify the connectivity,check if it gets charged via usb connection.
secondly,get your phone into bootloaders and connect it to your Pc via usb cable,see if usb appears at the bottom of the bootloader mode (multicolor screen),if it then it's connecting.
You don't need Activesync for flashing a Rom to your phone,it's done via usb cable,and while flashing activesync is automatically turned off by the Ruu.So if you are able to establish connectivity via usb cable in bootloaders (multicolor screen) you can flash to any Rom.
Cheers
I cannot switch on my device. When I tried hard reset it stucks at bootloader. so tried to enter boot mode (red green blue screen) and reinstal rom. it starts and look it works properly but instalation of new room is not completed (error 270). have read simmilar topics in forums and it seems it´s because device is not connected with activesync. any ideas how to fix? please don´t say I have a brick
Cannot connect
Use the original cable supplied by HTC. There seems to be an issue with other cables.
sanjeev
Are your really using ActiveSync or Mobile Device Center?
In bootloader mode when connected via USB, can you read "USB" on the Bottom of the Display?
to both questions I can say yes. but nothing happens. it seem pc doesn´t recognize device.
ypsilonq said:
to both questions I can say yes. but nothing happens. it seem pc doesn´t recognize device.
Click to expand...
Click to collapse
Opens activesync at the PDA and the go to connections settings. (menu->connections).
See if USB connection is selected there.
Cheers
thank you. I tried what you suggest but no change :-(
is the error you got when flashing the original HTC ROM?
if not download it from the official HTC site and then flash it using SD card flash (for more info about see the wiki)
finally fixed!!!!!!!!!!!!
I find original rom (t-mobile) and followed instructions from link provided by y_bother. big thanks !!!
HI ALL
please I need your help
i have an Orbit XDA with German ROM from O2
I installed another rom on the device and everything was ok
i made the First synch and everythng was ok
NOW i'm connecting the Device with PC and Nothing happen i made a hard reset i tried t remove theUSB From the DEVICE MANAGER ON MY LAPTOP and still this problem i'm so confused i tried to make a synchronization through the Bluetooth it's working but i need the USB cause i need to change the ROM So could you please tell me what to do with the SYNC MY LAPTOP OPERATING SYSTEM IS WINDOWS VISTA!
OR PLEASE TELL ME WHAT TO DO AND HOW TO UPGRADE THE ROM FROM THE MICROSD CARD
THANKS A LOT
Sd card flash
You can look at this wiki
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
try to start the device in Bootloader mode by prssing and hold Nots(voice command button) and press the restart button try to upgrade your rom while in bootloadr
* Bootloader is the multicolored screen