Database Users

After upgrare Stucked at boot screen

Artemis and PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap
i tried to upgrade my o2 arte200,i waited 30min. but installation frozen.
i did reset but after reset my phone stucked at bootscreen
IPL : 1.25.0001
SPL: 1.25.0000
GSM : 02.67.90
OS : 1.28.0.0
Please help... i tried hard reset and soft reset ... but no way...
when i plug usb cable activeSync dont recognise phone

same problem here,
help needed in advance

Active sync is usable only with Windows booted device. If Windows isn't able to boot, you must enter into bootloader, plug usb cable and then start rom flashing.

hi sir
i entered bootloader screen,connected usb cable ... (i can connect using mtty)
i run the software "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE"
but gets an error message " cant connect to the phone"
WHY ???

finally i did connection ...
but goes %3 and gives error message
ERROR 294 INVALID VENDER ID
this update utility cannot be used for your PDA Phone.Please check your update utility ??????

CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
is a Rom for the Wizard not for the Artemis.
You need the original ROM so you have to search for the O2 ARTE200 ROM. The language of the ROM has to be correct as well.

how do you get the phone into the bootloader?

Tha said:
how do you get the phone into the bootloader?
Click to expand...
Click to collapse
Press and hold the record button and then do a reset.

no it doesn't work
My DOPOD was in the same trouble. I got the same vender ID error. Does anyone know where to get the original DOPOD P800 chinese ROM?

The same problem has I also.
My ROM upgrade ended bad. Test of installing of different ( I have already them probably 12) the INVALID ends VENDOR ID
I it can not now to remove CID nor to find out what it has it CID HTC__001 does not it fit. T - MOB 005 does not it fit.
I look for original romu from Dngaard ( DK)
Someone knows what CID maybe it is in HTC 3300. I have HTC P3300 is distributed would to Dangaard.
Where from him download
I greet
Irek ( POLAND)

im having the same problem on the o2 orbit ( need a orignal rom

upgrading
hai i am stuck in o2 orbit flashing in bootloader mode
help needed urgent

i got it working after i found the original german rom...loaded the orbit into the bootloader screen with 3 colors....plugged in the usb cable..then ran the german rom, after a few mins it reset and the orbit loaded up...after that i followed these steps to get it into english
http://forum.xda-developers.com/showthread.php?t=290241
flashed it with the tmobileuk 1.13 shipped file. everything is ok now.

cbprod said:
i got it working after i found the original german rom....
Click to expand...
Click to collapse
Where do you find the orginal rom?
Please help us!

send me a pm with your email, i'll send it to you

got mine back from the repair center friday.
no cost at all, fixed

route said:
finally i did connection ...
but goes %3 and gives error message
ERROR 294 INVALID VENDER ID
this update utility cannot be used for your PDA Phone.Please check your update utility ??????
Click to expand...
Click to collapse
could you tell me how did you manage to conect your phone? i have the same problem and i can't get my palm recognized by windows...

you must go into the bootloader.
i´ve found the orginal o2 rom and now it´s working fine with wm5.
i wait for the o2 official wm6 update (i read something about may).

xister said:
you must go into the bootloader.
i´ve found the orginal o2 rom and now it´s working fine with wm5.
i wait for the o2 official wm6 update (i read something about may).
Click to expand...
Click to collapse
is that the o2 UK rom or the German one

Help! I am stucked in bootloader mode

Hello
I am stucked in BootLoader mode.
problems:
if i turn on the phone, nothing happens
if i reset the phone, nothing happens
if i hardreset the phone, greean and black sceen with ipl spl numbers.
if i take out the battery, nothing happens..
if i run the original htc wm6 setup or wm5 setup, it makes an error 300, invalid rom update utility.
i only can turn my phone to bootloader mode.
the RUU runs until i push "update" button, and then error 300!
please help me!
thank you
pulyka
ps:
htc wizard has "ROMUpdateUtility_Wizard_NoID.exe"
that is for this problem, i think.
google did not matched in herald like this

you ARE trying to RUU with a HERALD ruu, no?
Also, if you have a wing or a dopod, you must ruu with the tmobile or dopod variation of the RUU, respectively.

i have HTC herald (not wing or etc) black skin with grey buttons.
i tryed to flash with official wm6 ftom htc.com, and the official wm5, from the net (i dont know the source: RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe)
but, the error is the same: 300, invalid update tool.
my friend sais: my bootloader damaged.
i must get an SD Dump from a HTC herald, same as this device, and then i have a glimmer of hope..
or service repair:|
tmo ruu didnot worked also..
regards
pulyka

try mtty
set 16 0
or set 14 0, I forget which, try both
then do
task 8

Olipro said:
try mtty
set 16 0
or set 14 0, I forget which, try both
then do
task 8
Click to expand...
Click to collapse
I also got one with error 300
I try set 16 0 and set 14 0 both
then task 8,give me
Invalid command : task 8
For a help screen, use command ? or h
....how?

pulyka said:
Hello
I am stucked in BootLoader mode.
problems:
if i turn on the phone, nothing happens
if i reset the phone, nothing happens
if i hardreset the phone, greean and black sceen with ipl spl numbers.
if i take out the battery, nothing happens..
if i run the original htc wm6 setup or wm5 setup, it makes an error 300, invalid rom update utility.
i only can turn my phone to bootloader mode.
the RUU runs until i push "update" button, and then error 300!
please help me!
thank you
pulyka
ps:
htc wizard has "ROMUpdateUtility_Wizard_NoID.exe"
that is for this problem, i think.
google did not matched in herald like this
Click to expand...
Click to collapse
Help me,I like you

hponline said:
Help me,I like you
Click to expand...
Click to collapse
Hypercore's ROM kitchens has the Herald RUU upgrader... I wonder if that would work...

pulyka said:
Hello
I am stucked in BootLoader mode.
problems:
if i turn on the phone, nothing happens
if i reset the phone, nothing happens
if i hardreset the phone, greean and black sceen with ipl spl numbers.
if i take out the battery, nothing happens..
if i run the original htc wm6 setup or wm5 setup, it makes an error 300, invalid rom update utility.
i only can turn my phone to bootloader mode.
the RUU runs until i push "update" button, and then error 300!
please help me!
thank you
pulyka
ps:
htc wizard has "ROMUpdateUtility_Wizard_NoID.exe"
that is for this problem, i think.
google did not matched in herald like this
Click to expand...
Click to collapse
I also have the same probem.. after using HERALD-USPL-beta3
beucase I want to change langauge GERMANY to ENGLISH.
PHONE IS HTC HERA100
and having same problem as ABOVE.
NEED SOLUTION.. any comment is will be appreciated
Br.

What is your IPL and SPL in bootloader?
Where did you buy your herald?

oddball1 said:
What is your IPL and SPL in bootloader?
Where did you buy your herald?
Click to expand...
Click to collapse
Its not mine phone.. Its from my Customer he bring phone to me for change language.
before I don't checked IPL / SPL
but after using HERALD-USPL-beta3
NOW IPL IS 1.08.0001 and SPL IS 1.08.0001 is also same.
waiting for the solution..
Br.

DrMobile said:
Its not mine phone.. Its from my Customer he bring phone to me for change language.
before I don't checked IPL / SPL
but after using HERALD-USPL-beta3
NOW IPL IS 1.08.0001 and SPL IS 1.08.0001 is also same.
waiting for the solution..
Br.
Click to expand...
Click to collapse
hello!
Have you ever solved your problem? If yes maybe you can share!!!!!
Or any solution for this yet? Please I need help.
Br
keke

SD flashing problem (bricked hardSPL, trying to unbrick it...)

hello
ive a hardSPL bricked Herald device. Well, im trying all possible ways to recover and get it unbricked, also to find out a solution for everyone that haves a Herald bricked.
I was trying by flashing via SD method. It starts fine, but:
a) If I try a original ROM (ruu_signed.nbh), it says Checking Certificate and just jumps to Bootloader screen
b) If I try canonyang.nbh, it says Invalid Certificate, so I can think the hardSPL procedure was never complete... so I think recovery of those products can be done by flashing a patched bootloader or patched firmware (so our Herald bricked products arent "bricked" at all... just no CID unlocked)
c) Flashing by USB cable always says error 300
d) trying by mtty can be realiable, just dont know where to flash (using wdata command)
Hey everyone, help with suggestions and everything! lets unbrick our Herald devices!!
update 1: looked around in XDA Wiki pages, Ive found some useful info:
the ipl can be read with pmemdump from 0x82000000
pmemdump 0x82000000 0x800 ipl.nb
Click to expand...
Click to collapse
update 2: this is the original info from HTC Herald (working device)
Device: HERA10000
CID: HTC__203
Click to expand...
Click to collapse

i have the same problem

try this
http://forum.xda-developers.com/showthread.php?t=417930

don't have an working pda and my pda is not detected by active sync. Does are musts for the method in that post

First thing you should do is download the "Official Herald RUU"
Then put your phone in the bootloader screen (hold the camera button down and soft reset with the stylus)
Run the flash center with your official ruu (Active Sync won't see your phone but it doesn't matter)
Should unbrick your Herald. Maybe I'm wrong? I don't have a IPL thats 1.xx....

tried that i have ipl 1.08. I tried with official heral rom but checks the sd card for 5 seconds then goes to the rgb screen

SPV M3100 please help step by step!!!!!!!!!!

i have SPV M3100 with
when enter boot HERM100
IPL-1.01
HERM100
SPL-2.03
when power M05
S04 NO gsm
B06 D3.60
after powered with splash imaging Orange phone hang on white screen
i tryed with some rom from forum failed error with INVALID VENDER ID or UPDATE error
(alway error at 1 or 7%)
i think my phone is locked SuperCID
anyone can help me???
thank in advance

Hard-SPL
mrphuc said:
i have SPV M3100 with
when enter boot HERM100
IPL-1.01
HERM100
SPL-2.03
when power M05
S04 NO gsm
B06 D3.60
after powered with splash imaging Orange phone hang on white screen
i tryed with some rom from forum failed error with INVALID VENDER ID or UPDATE error
(alway error at 1 or 7%)
i think my phone is locked SuperCID
anyone can help me???
thank in advance
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=296722

To try and recover - RE-INSTALL THE STOCK, CARRIER ROM. Then HARD SPL YOUR PHONE!!!!!
Your phone ISN'T supercid by default. Hard SPL is the best way of doing this. I can't guarantee you will fix this problem as there are a hell of a lot of others with this problem. Do a search with the words "SPL 2.03 brick flashing" and you'll see, might be able to help too.
Good Luck...

I Had Found Provider
This Is From Orange Romania
I Tryed With Spl Not Done
How To Find Original Rom From Orange Romania????

See if they have a website. It may be WM05 though. Thats OK because you can then install Hard SPl and reflash afterwards. If you can't find........

nothing found!!!!!!!!!!!!!
ultramag69 said:
See if they have a website. It may be WM05 though. Thats OK because you can then install Hard SPl and reflash afterwards. If you can't find........
Click to expand...
Click to collapse
nothing in they's site
what i must to do?????

HELP ! bricked my NIKI100 [Upgrade ROM code error] need support!!

Hi guys,
Here's what I did (something very stupid) and what happened :
I have a NIKI100 which has simlock and HAD a vodafone dutch splash screen with original rom and radio.
I followed the instructions and managed to flash a new rom with
RUU_Nike_HTC_NLD_2.09.404.1_Radio_NikeMR_1.65.28.2 5_signed_Ship.exe
I still had SIMlock so I started over the procedure with Niki-SuperCID
Here I made the STUPID mistake to hardspl while I FORGOT to SSPL first!
so this is what happened next: rom update halted at 95% I got error and began
recovery. (1) Ever after this I get ERROR[262] whatever I try and update halts at 0%.
I tried to flash the ROM again but then I get error [294]:INVALID VENDER ID
everytime I reset the phone I get red-green-blue screen :
NIKI100
SPL-1.22.0000
CPLD-4
Upgrade ROM code error
please try again
I tried hardspl but I get (1)
Iknow I was stupid to forget SSPL first, but how do I get my phone back to work again ? any help would be very appreciated !!

Upgrade rom error code
help help same poblem.....

Not sure where I read it here, but you will need mtty. In there (for me it took several tries to get it to connect) type "set 16 0" - then "task 8".

I did! I did push that button!
I did the MTTY with set 0 16 then task 8 and it worked!!!
Thanks your highness!!
Now I can try the RUU again

DarkSayaJin said:
I did the MTTY with set 0 16 then task 8 and it worked!!!
Thanks your highness!!
Now I can try the RUU again
Click to expand...
Click to collapse
hi .. what exactly did you do ? i have the exact phone, exact error, exact program, downloaded from the attachement, and when i connect with mtty i can`t type in the console, only paste, and it doesn`t do anything for me. can you please explain what exactly did you do ? thanks

nevermind ......
don`t mind my post, i`m sorry i`m blind .... i was connecton thru com ports, i didn`t notice the usb button ... jeez i`m stupid, anyway connected thru usb , typed the commands and it rebooted with the windows 6.1 .. works perfectly now. thanks for your post and mtty attachment, very helpfull

DarkSayaJin said:
I did the MTTY with set 0 16 then task 8 and it worked!!!
Thanks your highness!!
Now I can try the RUU again
Click to expand...
Click to collapse
Same prob here...
I can't understand what u guys did... I don't see any USB button and don't know where to type...
help plz?!

Niki200
T-mobile HU
Original Rom
http://rapidshare.com/files/272691817/NikiT07.rar.html

See my attach plz.
Thkx.
P.S. "d ual Tou ch" is my pda...
i guess i have NIKI 100 and not 200...