Database Users

After upgrare Stucked at boot screen

Artemis and PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap
i tried to upgrade my o2 arte200,i waited 30min. but installation frozen.
i did reset but after reset my phone stucked at bootscreen
IPL : 1.25.0001
SPL: 1.25.0000
GSM : 02.67.90
OS : 1.28.0.0
Please help... i tried hard reset and soft reset ... but no way...
when i plug usb cable activeSync dont recognise phone

same problem here,
help needed in advance

Active sync is usable only with Windows booted device. If Windows isn't able to boot, you must enter into bootloader, plug usb cable and then start rom flashing.

hi sir
i entered bootloader screen,connected usb cable ... (i can connect using mtty)
i run the software "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE"
but gets an error message " cant connect to the phone"
WHY ???

finally i did connection ...
but goes %3 and gives error message
ERROR 294 INVALID VENDER ID
this update utility cannot be used for your PDA Phone.Please check your update utility ??????

CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
is a Rom for the Wizard not for the Artemis.
You need the original ROM so you have to search for the O2 ARTE200 ROM. The language of the ROM has to be correct as well.

how do you get the phone into the bootloader?

Tha said:
how do you get the phone into the bootloader?
Click to expand...
Click to collapse
Press and hold the record button and then do a reset.

no it doesn't work
My DOPOD was in the same trouble. I got the same vender ID error. Does anyone know where to get the original DOPOD P800 chinese ROM?

The same problem has I also.
My ROM upgrade ended bad. Test of installing of different ( I have already them probably 12) the INVALID ends VENDOR ID
I it can not now to remove CID nor to find out what it has it CID HTC__001 does not it fit. T - MOB 005 does not it fit.
I look for original romu from Dngaard ( DK)
Someone knows what CID maybe it is in HTC 3300. I have HTC P3300 is distributed would to Dangaard.
Where from him download
I greet
Irek ( POLAND)

im having the same problem on the o2 orbit ( need a orignal rom

upgrading
hai i am stuck in o2 orbit flashing in bootloader mode
help needed urgent

i got it working after i found the original german rom...loaded the orbit into the bootloader screen with 3 colors....plugged in the usb cable..then ran the german rom, after a few mins it reset and the orbit loaded up...after that i followed these steps to get it into english
http://forum.xda-developers.com/showthread.php?t=290241
flashed it with the tmobileuk 1.13 shipped file. everything is ok now.

cbprod said:
i got it working after i found the original german rom....
Click to expand...
Click to collapse
Where do you find the orginal rom?
Please help us!

send me a pm with your email, i'll send it to you

got mine back from the repair center friday.
no cost at all, fixed

route said:
finally i did connection ...
but goes %3 and gives error message
ERROR 294 INVALID VENDER ID
this update utility cannot be used for your PDA Phone.Please check your update utility ??????
Click to expand...
Click to collapse
could you tell me how did you manage to conect your phone? i have the same problem and i can't get my palm recognized by windows...

you must go into the bootloader.
i´ve found the orginal o2 rom and now it´s working fine with wm5.
i wait for the o2 official wm6 update (i read something about may).

xister said:
you must go into the bootloader.
i´ve found the orginal o2 rom and now it´s working fine with wm5.
i wait for the o2 official wm6 update (i read something about may).
Click to expand...
Click to collapse
is that the o2 UK rom or the German one

Help! I am stucked in bootloader mode

Hello
I am stucked in BootLoader mode.
problems:
if i turn on the phone, nothing happens
if i reset the phone, nothing happens
if i hardreset the phone, greean and black sceen with ipl spl numbers.
if i take out the battery, nothing happens..
if i run the original htc wm6 setup or wm5 setup, it makes an error 300, invalid rom update utility.
i only can turn my phone to bootloader mode.
the RUU runs until i push "update" button, and then error 300!
please help me!
thank you
pulyka
ps:
htc wizard has "ROMUpdateUtility_Wizard_NoID.exe"
that is for this problem, i think.
google did not matched in herald like this

you ARE trying to RUU with a HERALD ruu, no?
Also, if you have a wing or a dopod, you must ruu with the tmobile or dopod variation of the RUU, respectively.

i have HTC herald (not wing or etc) black skin with grey buttons.
i tryed to flash with official wm6 ftom htc.com, and the official wm5, from the net (i dont know the source: RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe)
but, the error is the same: 300, invalid update tool.
my friend sais: my bootloader damaged.
i must get an SD Dump from a HTC herald, same as this device, and then i have a glimmer of hope..
or service repair:|
tmo ruu didnot worked also..
regards
pulyka

try mtty
set 16 0
or set 14 0, I forget which, try both
then do
task 8

Olipro said:
try mtty
set 16 0
or set 14 0, I forget which, try both
then do
task 8
Click to expand...
Click to collapse
I also got one with error 300
I try set 16 0 and set 14 0 both
then task 8,give me
Invalid command : task 8
For a help screen, use command ? or h
....how?

pulyka said:
Hello
I am stucked in BootLoader mode.
problems:
if i turn on the phone, nothing happens
if i reset the phone, nothing happens
if i hardreset the phone, greean and black sceen with ipl spl numbers.
if i take out the battery, nothing happens..
if i run the original htc wm6 setup or wm5 setup, it makes an error 300, invalid rom update utility.
i only can turn my phone to bootloader mode.
the RUU runs until i push "update" button, and then error 300!
please help me!
thank you
pulyka
ps:
htc wizard has "ROMUpdateUtility_Wizard_NoID.exe"
that is for this problem, i think.
google did not matched in herald like this
Click to expand...
Click to collapse
Help me,I like you

hponline said:
Help me,I like you
Click to expand...
Click to collapse
Hypercore's ROM kitchens has the Herald RUU upgrader... I wonder if that would work...

pulyka said:
Hello
I am stucked in BootLoader mode.
problems:
if i turn on the phone, nothing happens
if i reset the phone, nothing happens
if i hardreset the phone, greean and black sceen with ipl spl numbers.
if i take out the battery, nothing happens..
if i run the original htc wm6 setup or wm5 setup, it makes an error 300, invalid rom update utility.
i only can turn my phone to bootloader mode.
the RUU runs until i push "update" button, and then error 300!
please help me!
thank you
pulyka
ps:
htc wizard has "ROMUpdateUtility_Wizard_NoID.exe"
that is for this problem, i think.
google did not matched in herald like this
Click to expand...
Click to collapse
I also have the same probem.. after using HERALD-USPL-beta3
beucase I want to change langauge GERMANY to ENGLISH.
PHONE IS HTC HERA100
and having same problem as ABOVE.
NEED SOLUTION.. any comment is will be appreciated
Br.

What is your IPL and SPL in bootloader?
Where did you buy your herald?

oddball1 said:
What is your IPL and SPL in bootloader?
Where did you buy your herald?
Click to expand...
Click to collapse
Its not mine phone.. Its from my Customer he bring phone to me for change language.
before I don't checked IPL / SPL
but after using HERALD-USPL-beta3
NOW IPL IS 1.08.0001 and SPL IS 1.08.0001 is also same.
waiting for the solution..
Br.

DrMobile said:
Its not mine phone.. Its from my Customer he bring phone to me for change language.
before I don't checked IPL / SPL
but after using HERALD-USPL-beta3
NOW IPL IS 1.08.0001 and SPL IS 1.08.0001 is also same.
waiting for the solution..
Br.
Click to expand...
Click to collapse
hello!
Have you ever solved your problem? If yes maybe you can share!!!!!
Or any solution for this yet? Please I need help.
Br
keke

MDA stops on Bootloader screen

Hey people,
I have got on nice MDA with ipl and spl 2.21.0001
me problem is i have no idea wath did happend to it.
the MDA starts up shows T-Mobile ... an go to the Bootloaderscreen (red IPL2.21.0001, green spl 2.2.0001, blue, with)
so i have tried to flash it now with WM5 from T-Mobil image ver 2.26.10.105 (from this nice Board here
The flash tool shows no image information of my MDA but the posibility i there to push the update button. If i do that the update tool trys to flash a few seconds and stops with error code 294 (invalid vender id). on the MDA is noch change (still bootloaderscreen)
some one of you has an idea wath could be happend to this device ?
or an idea wath can i doo ?

Yes!!!
Your problem... is NOT READ Enough!
So please read how to make a hardSPL cause your wizard is G4....
if you do it well you can upgrade whatever you want but for this time... you need to exit bootloader screen so... perform sofresets! or hardreset!
Keep reading for more chances...

You don't need to apply HardSPL or SoftSPL to flash an official stock rom.
Which language or version was working primarily on the phone before you flashed t-mobile 2.26 ?
Secondly download 'RUU_NoId' or 'RUU_MUN' and replace it with the RUU in the rom and Run the replaced RUU,hope it'll work.

Hi,
and thanks for the answers.
i do not know wath was befor on it. i have get it with the information that there was an klabel inside for the keybord not in the slot .... and after "reparing" - the mda do not boot.
up to now i have update it with orginal firmware and it runs again ... so peraps someone has talk **** to me ?! - now i think it was a bad flash
p.s. the vendor id problem was my mistake, was the wrong update

brick while upgrading the radio

can anyone put me through on how to recover hermes 300 tytyn. during unlocking process the phone stopped while upgrading the radio and now the phone come up with tri mode color
here is the info
herm300
IPL-1.01
herm300
SPL-1.40.olipro
thanks in advance

billycomm said:
can anyone put me through on how to recover hermes 300 tytyn. during unlocking process the phone stopped while upgrading the radio and now the phone come up with tri mode color
here is the info
herm300
IPL-1.01
herm300
SPL-1.40.olipro
thanks in advance
Click to expand...
Click to collapse
If device can get into bootloader you phone is not bricked and you should be able to re-try flashing radio/rom. Have you tried a hard reset?

Upgrade Failed on ELF 0100, ERROR 270

Hello,
I got problem when upgrading mais PDA. my PDA is locked for Orange(France) and wanna unlock it.
I folewed the unlock tutorial , but at the end the phone shutdown after displaying the splash screen. seems that the rom was wrong.
I got ERROR 270 when I try to upgrade with differente rom. so right now, I can not it.
please help !!!

How do you unlock?
What is your IPL and SPL?
It should be 3.10 .
Unlock error codes are located here:
http://wiki.xda-developers.com/index.php?pagename=Elf_RUU_Error_Codes

thank for your replay
I used the USPL tutorial to unlock, but when update the rom I think I used a wrong version.
my IPL SPL 1.16.
my HTC ELF 0100 didn't continue starting.
I tried most solution found on the net.

Wait, what?
You used the wrong version to update?
which is?

I didn't remember exactly, but I have a T-Mobile Splash screen.
the phone shut down seconds after starting.
thanks for help !!!!

any one have an idea on how to recover my phone , please help !!!!!!!!!!!!!!!!!!!

my elf is in 3 color, try mani soft but not work any ideea ?