Hello,
I got problem when upgrading mais PDA. my PDA is locked for Orange(France) and wanna unlock it.
I folewed the unlock tutorial , but at the end the phone shutdown after displaying the splash screen. seems that the rom was wrong.
I got ERROR 270 when I try to upgrade with differente rom. so right now, I can not it.
please help !!!
How do you unlock?
What is your IPL and SPL?
It should be 3.10 .
Unlock error codes are located here:
http://wiki.xda-developers.com/index.php?pagename=Elf_RUU_Error_Codes
thank for your replay
I used the USPL tutorial to unlock, but when update the rom I think I used a wrong version.
my IPL SPL 1.16.
my HTC ELF 0100 didn't continue starting.
I tried most solution found on the net.
Wait, what?
You used the wrong version to update?
which is?
I didn't remember exactly, but I have a T-Mobile Splash screen.
the phone shut down seconds after starting.
thanks for help !!!!
any one have an idea on how to recover my phone , please help !!!!!!!!!!!!!!!!!!!
my elf is in 3 color, try mani soft but not work any ideea ?
Related
Hello Buds,
I've upgrade my p 3300 a few weeks ago with Artemis_touch_1.0_WWE_rapid
IPL 1.14.0001
SPL 1.14.000
GSM 02.67.90
OS 3.7.0.0
After some days a freeze and soft reset, I made a hard reset, and re-use the upgrade soft ware.
Now its completly block on the boot page with HTC.
I use RUU(in( Artemis_touch_1.0_WWE_rapid) in the Bootloader but it run but after 3% : error 270
If a use a newer RUU ( Release_Aje_fr_1.90Full_YuanYuan) : error 260
please help me I completly lost !
Trux 13
HTC P3300IPL 1.14.0001
SPL 1.14.000
GSM 02.67.90
OS 3.7.0.0
I had almost the same problem. I intented to change my ROM with an WM6 but it faild and the PDA is some kind dead it freezes in the boot screen. is there some tool to change the rom to an original HTC rom or thre is no help. I hope somebady can help me. the version of the ROM that apears on the screen is:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 4.0.0.0
I've tried to :
Hello...
In bootloader run USPL
It run, to 0% >> to 100% but right after : error 270
Still block...
Trux 13
hmm i don`t know how i can get the device to boot loader mode can u tell me how
Bootloader
Go in ths Thread :
http://forum.xda-developers.com/showthread.php?t=306880
Trux13
hi i solved my problem i used one spanish version of the WM6 for P3300 and it works if u want hire is the link http://www.megaupload.com/es/?d=YZOQEF4H
u can install it and then change to one on english its what i will do today and i saw how to enter in 3 color bootloader mode ON/OFF boton + VOCAL + RESTART then holding the ON/OFF + VOCAL
Stillnot working
I tried your *.exe file but not working
Trux
me too . always the error
ipl 1,14,0001
spl 1,14,0000
g 02 67 90
os 1,14,00
i ll be crzy! jesus! someone help me!
how to run the uspl on this tm phone ?
Has anybody solved the problem? I have exactly same errors and can't do anything
Try This:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
i tried this already. Invalid certificate any other ideas ?
woojtekr said:
i tried this already. Invalid certificate any other ideas ?
Click to expand...
Click to collapse
Hi
if you need still help GG9735272
the only solution !!!!
woojtekr said:
Has anybody solved the problem? I have exactly same errors and can't do anything
Click to expand...
Click to collapse
to everybody who is stuck at HTC screen. The only,and i mean the ONLY way to fix this is to find the original rom for your provider !!! belive me,i`ve tried every possible other way.
SD Card Flashing wont work coz your devices are probably CID Locked,so it goes only to 3% flashing and restarts.Finally I found original o2 ROM (German) and it worked like a charm Even the original o2 (English) ROM did NOT work,it had to be the German one,coz probably the device came with German ROM originally !!!.
So my suggestion is,stop trying to flash it with different ROM`s and spend some time finding original ROM from your provider and it has to be the same language as your provider. even if it`s WM6 and your device was originally was WM5,as long as its from your provider and same language it should flash with no problem.I spent 2 weeks to find this out ))
Good Luck to everybody ))
savich said:
to everybody who is stuck at HTC screen. The only,and i mean the ONLY way to fix this is to find the original rom for your provider !!! belive me,i`ve tried every possible other way.
SD Card Flashing wont work coz your devices are probably CID Locked,so it goes only to 3% flashing and restarts.Finally I found original o2 ROM (German) and it worked like a charm Even the original o2 (English) ROM did NOT work,it had to be the German one,coz probably the device came with German ROM originally !!!.
So my suggestion is,stop trying to flash it with different ROM`s and spend some time finding original ROM from your provider and it has to be the same language as your provider. even if it`s WM6 and your device was originally was WM5,as long as its from your provider and same language it should flash with no problem.I spent 2 weeks to find this out ))
Good Luck to everybody ))
Click to expand...
Click to collapse
I have the same problem and I've come to believe that this is the only solution. Just one thing: I didn't back up ROM before I tried to flash (talk about a noob mistake).
So, I ask, I plead, I beg... can anyone tell me where to get an original Orange France ROM for the Artemis (SPV M650)?
To my knowlegde you cant backup the rom from your device. whenever you change your rom, use the USPL tool. It is a golden rule until something better is made.
Here are some tips:
First make sure you have a original factory rom from your provider/brand/etc.
Check with a soft reset if code: SPL 1.11000 appears on the the boot screen. (then it is CID unlocked) Any other number and it is locked so you have to USPL first before you change to any custom rom.
If you flash a factory rom then the SPL resets to a non SPL 1.1100 number again. Use USPL to CID unlock again.
Also avoid Vista (especially 64bit) to use the USPL tool. Do it on a windows XP machine. Also there reports of glitches in the usb connection and active sync when doing upgrades or USPL. So keep you system as clean as possible. Dont use a USB hub and disconnect any other usb devices just to make sure.
Also remove your SD / SDHC card before doing a upgrade.
Sometimes the new rom misses some stuff when flashing. When this happens just flash the rom again. But first make sure if its still CID unlocked by soft reseting and check if SPL 1.1100 else use USPL first.
Even if you did all that, there still can be things that can go wrong. So if you absolutely confident to do a custom rom then do it. Otherwise use original upgrades from your provider
brim
help i breaked my htc p3300
jai lereur 270 jai essaiyer tous les rom rien ne marche ::
p3300 work again
p3300 movistar work again
Helle everyone! First of all, sorry for my bad english! However some days ago i read that htc have done a wm upgrade for my phone (6.1) i didn't know that it wasn't for gsm version.. when i did thet upgrade i had on the phone the onyx rom and the cid unlocked, with this upgrade the spl came back to the original but the original rom doesn't start the installation. so i have the spl 2.26.0000 and the onyx rom that doesn't start and when i turn on my phone it remain in the display of 3 colors of upgrade.. what i can do now?? i have the warranty cause i bought the on july.. plese help me, how can explain them this fact? i'm in yours hand..
thank you
Jasper
Hi
I think you should try to cid unlock again, if it works you could flash the onyx again, if not there's a lot to read in here http://forum.xda-developers.com/showthread.php?t=406721
Good luck
i've tried a lot of times to unlock the cid but it give me the error: ERROR [200] Invalid update tool
Please get newer update utility
I used the latest version of spl and it's the same.. I tried to dump the original rom and it give me the same error 200.. Further there is no RUU in the display of htc..
Sorry for the english
Nobody can help me??
Hi JesperHTC-Touch !
Do you use windows xp or Vista to sunc yourè phone?
xp, but i have the phone locket to the bootloader and activesync it isn't green..
Hi JasperHTC-Touch!
I have also got that ERROR [200] Invalid update.
I recomend you to install IPL & SPL 310 you can find it her http://forum.xda-developers.com/attachment.php?attachmentid=130771&d=1226977938
http://forum.xda-developers.com/attachment.php?attachmentid=130567&d=1226919217But use this tool to do the upgradehttp://forum.xda-developers.com/attachment.php?attachmentid=101826&stc=1&d=1217022319
Dont be worry i diddent got the color bar either. But be shure to have at least 50% of battery capacity before yoy do the upgrade. Put the file from (310 inside the catalog in 226 /RUU and replace the file RUU_Signed.nbh that you downloded at press theelf-uspl.exe and read carfully what you seen on the screen and dont dissconnect youre phone before you have started up the phone completely. Thats what i did and it works for me. God luck
Kindly MacRoy
I did what you told, but it doesn't work, i'm triyng to upgrade with all the original rom of this phone.. it's impossible i can't unbrick my phone
Another fact it doesn't enetr in ruu-bootloader.. only bootloader
Try to hard-resetting the phone!
just tried and doesn't work.. i spent 350 euro in july for this phone!!
Hi
try the unbricker rom method mentioned in this thread
http://forum.xda-developers.com/showthread.php?t=446242
it is a trial original rom that can be flashed from SD card then after that you can CID unlock again (good Luck)
dowsn't work :'(
i also tried to unlock the spl from microsd but it give me the error: invalid certificate..
Nobody can help me?? i don't want bring it to the guarantee.. sorry for the bad english..
i have elf0100 white one
i upgrade it to oynex wm6.1 and when i turn on device show me itself the bootloader with 3 colors red blue and green
when i update to any update it ggoes to 2% and on my computer
say error 270 why ??? why ????
maybe idon't have CID unlocked but my phone only start up on bootloader
please help to upgrade to original update
iwant to mke my phone cid unlocked with boot loader
or with any program !!!!!!!!!!!
please help the man help me ; the man son help me
and i beholden any one help me
You Need The GoldCard!
i have elf0100 white one
i upgrade it to oynex wm6.1 and when i turn on device show me itself the bootloader with 3 colors red blue and green
when i update to any update it ggoes to 2% and on my computer
say error 270 why ??? why ????
maybe idon't have CID unlocked but my phone only start up on bootloader
please help to upgrade to original update
iwant to mke my phone cid unlocked with boot loader
or with any program !!!!!!!!!!!
please help the man help me ; the man son help me
and i beholden any one help me
If it loaded 2% and restarted and shows the tricolour. You ARE CID locked.
http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard
Use that link. Do your research.
If you cannot do the GoldCard by PC. Borrow a friends WM phone and make the gold card out of that.
for the USPL and IPL (which i believe you are asking for) can be found at
http://forum.xda-developers.com/showthread.php?t=408637
I just went easy on you and I don't know if they are going to keep this Thread Post up.
Just to answer everyone.
Do the research and do the work before asking silly questions. There is a million of these on XDA.
Have Fun Unbricking! Your phone is not dead!
I have work and found other ways to fix this problem
your way is very hard
I have update it to elf 10052 and work fine and very fast than the old original one
magawa said:
I have work and found other ways to fix this problem
your way is very hard
I have update it to elf 10052 and work fine and very fast than the old original one
Click to expand...
Click to collapse
That's good
Can you post your way, please
The gold card method is long, but proven successful for many people.
I agree with the GOLD CARD Method it have resolved many PDA to give life...
Hello everyone,
I tried to CID unlock my T-Mobile MDA Touch with *ELF_USPL-v1*
At first everything went right. Simunlock was no problem.
anamnesis:
Starts with T-Mobile logo but shuts down after some seconds
Bootloader works fine:
- IPL 2.26.0002
- SPL 1.11.0000
nothing else
I allready tried to flash other Roms like
*RUU_Elf_HTC_Asia_HK_WWE_1[1].15.721.3B_4.1.13.46_02.97.90_BLUE_Ship*
but nothing seems to work. Is there someone who can Help me?
would appreciate it.
*Updates*
_________________________________________________
RUU_MDA_Touch_1.13.111.4GER_SHIP_ROM_ONLY_OS_2
Worked but no result -> means congrats on screen
_________________________________________________
ELFIN_T-MOBILE_GER_ROM2.26.111.53_GSM_03.08.90_INCL_EXTROM_SPLASH
Doesnt work either
Sins666 said:
Hello everyone,
I tried to CID unlock my T-Mobile MDA Touch with *ELF_USPL-v1*
At first everything went right. Simunlock was no problem.
anamnesis:
Starts with T-Mobile logo but shuts down after some seconds
Bootloader works fine:
- IPL 2.26.0002
- SPL 1.11.0000
nothing else
I allready tried to flash other Roms like
*RUU_Elf_HTC_Asia_HK_WWE_1[1].15.721.3B_4.1.13.46_02.97.90_BLUE_Ship*
but nothing seems to work. Is there someone who can Help me?
would appreciate it.
Click to expand...
Click to collapse
Did u HSPL the device???
I used this Tutorial forum.xda-developers.com/showthread.php?t=320155 after I simunlocked the device. So I think I didnt HSPL ed it. Sounded pretty easy as i read the tut, but right now I start to think maybe I should have read some more information about flashing -.-.
Still would be supernovaphantastic if somebody could help me or could explain how to flash this device working with the Bootloader only... because nothing else works.
Hardreset doesnt work too... frustrating
Sins666 said:
Hello everyone,
I tried to CID unlock my T-Mobile MDA Touch with *ELF_USPL-v1*
At first everything went right. Simunlock was no problem.
anamnesis:
Starts with T-Mobile logo but shuts down after some seconds
Bootloader works fine:
- IPL 2.26.0002
- SPL 1.11.0000
nothing else
I allready tried to flash other Roms like
*RUU_Elf_HTC_Asia_HK_WWE_1[1].15.721.3B_4.1.13.46_02.97.90_BLUE_Ship*
but nothing seems to work. Is there someone who can Help me?
would appreciate it.
*Updates*
_________________________________________________
RUU_MDA_Touch_1.13.111.4GER_SHIP_ROM_ONLY_OS_2
Worked but no result -> means congrats on screen
_________________________________________________
ELFIN_T-MOBILE_GER_ROM2.26.111.53_GSM_03.08.90_INCL_EXTROM_SPLASH
Doesnt work either
Click to expand...
Click to collapse
First of, Y are you in the OPAL forum ?
shouldnt you be looking for answers in the ELF forum,
anyway I think this link is a possible solution to your problem
http://forum.xda-developers.com/showthread.php?t=445666
I updated the original ROM to wm 6.1, cause the old one was Spanish. After this it worked for 30 minutes, but then it made re-start every 5 minutes. Turned it off, but cannot turn it on again. The first screen with Vodafone comes up, then it shuts down again. I can enter bootloader tricolor mode, but there is no RUU on the right corner, just two version numbers on the left side. Please help! Tried soft and hard reset, didnt work.
what it shows on boot loader mode ???????
don't worry just unlock and update spl , ipl
and then flash with any good rom ( not official rom )
i would suggest u to flash with onyx_6_release13 .
best of luck .
How do I unlock it, if it wont turn on, a cannot connect it to my PC?
I will make a screeshot from the bootloader screen.
Thank you in advance.
Ok, now it works. Used the method of dsixda. Worked fine.
hi
I have got a bricked HTC ELF with a tri-colour screen.(red, green and blue). I did try matty.exe and found that cid is locked. g_cKeyCardSecurityLevel = FF
I dont have the original firmaware backed up. and could not find anywhere on this site and internet.
device id: ELF010050
cid: HTC E11
IPL 1.17.002
SPL: 1.17.0
any help or suggestion plz?
regards
gogagogi.
Read all the stickies, it is covered in there. Don't hijack threads, and post in relevant sections please.