Hello
I am stucked in BootLoader mode.
problems:
if i turn on the phone, nothing happens
if i reset the phone, nothing happens
if i hardreset the phone, greean and black sceen with ipl spl numbers.
if i take out the battery, nothing happens..
if i run the original htc wm6 setup or wm5 setup, it makes an error 300, invalid rom update utility.
i only can turn my phone to bootloader mode.
the RUU runs until i push "update" button, and then error 300!
please help me!
thank you
pulyka
ps:
htc wizard has "ROMUpdateUtility_Wizard_NoID.exe"
that is for this problem, i think.
google did not matched in herald like this
you ARE trying to RUU with a HERALD ruu, no?
Also, if you have a wing or a dopod, you must ruu with the tmobile or dopod variation of the RUU, respectively.
i have HTC herald (not wing or etc) black skin with grey buttons.
i tryed to flash with official wm6 ftom htc.com, and the official wm5, from the net (i dont know the source: RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe)
but, the error is the same: 300, invalid update tool.
my friend sais: my bootloader damaged.
i must get an SD Dump from a HTC herald, same as this device, and then i have a glimmer of hope..
or service repair:|
tmo ruu didnot worked also..
regards
pulyka
try mtty
set 16 0
or set 14 0, I forget which, try both
then do
task 8
Olipro said:
try mtty
set 16 0
or set 14 0, I forget which, try both
then do
task 8
Click to expand...
Click to collapse
I also got one with error 300
I try set 16 0 and set 14 0 both
then task 8,give me
Invalid command : task 8
For a help screen, use command ? or h
....how?
pulyka said:
Hello
I am stucked in BootLoader mode.
problems:
if i turn on the phone, nothing happens
if i reset the phone, nothing happens
if i hardreset the phone, greean and black sceen with ipl spl numbers.
if i take out the battery, nothing happens..
if i run the original htc wm6 setup or wm5 setup, it makes an error 300, invalid rom update utility.
i only can turn my phone to bootloader mode.
the RUU runs until i push "update" button, and then error 300!
please help me!
thank you
pulyka
ps:
htc wizard has "ROMUpdateUtility_Wizard_NoID.exe"
that is for this problem, i think.
google did not matched in herald like this
Click to expand...
Click to collapse
Help me,I like you
hponline said:
Help me,I like you
Click to expand...
Click to collapse
Hypercore's ROM kitchens has the Herald RUU upgrader... I wonder if that would work...
pulyka said:
Hello
I am stucked in BootLoader mode.
problems:
if i turn on the phone, nothing happens
if i reset the phone, nothing happens
if i hardreset the phone, greean and black sceen with ipl spl numbers.
if i take out the battery, nothing happens..
if i run the original htc wm6 setup or wm5 setup, it makes an error 300, invalid rom update utility.
i only can turn my phone to bootloader mode.
the RUU runs until i push "update" button, and then error 300!
please help me!
thank you
pulyka
ps:
htc wizard has "ROMUpdateUtility_Wizard_NoID.exe"
that is for this problem, i think.
google did not matched in herald like this
Click to expand...
Click to collapse
I also have the same probem.. after using HERALD-USPL-beta3
beucase I want to change langauge GERMANY to ENGLISH.
PHONE IS HTC HERA100
and having same problem as ABOVE.
NEED SOLUTION.. any comment is will be appreciated
Br.
What is your IPL and SPL in bootloader?
Where did you buy your herald?
oddball1 said:
What is your IPL and SPL in bootloader?
Where did you buy your herald?
Click to expand...
Click to collapse
Its not mine phone.. Its from my Customer he bring phone to me for change language.
before I don't checked IPL / SPL
but after using HERALD-USPL-beta3
NOW IPL IS 1.08.0001 and SPL IS 1.08.0001 is also same.
waiting for the solution..
Br.
DrMobile said:
Its not mine phone.. Its from my Customer he bring phone to me for change language.
before I don't checked IPL / SPL
but after using HERALD-USPL-beta3
NOW IPL IS 1.08.0001 and SPL IS 1.08.0001 is also same.
waiting for the solution..
Br.
Click to expand...
Click to collapse
hello!
Have you ever solved your problem? If yes maybe you can share!!!!!
Or any solution for this yet? Please I need help.
Br
keke
Related
Help me with unbricking my device please!
I used only upsl and i think i had spl under 4.00.0000
now my spl and ipl 1.09.0001 and ppc load only in bootloader
romupdater says error [300] and flash via SD card not working...
please help! i have only sunday to unbrick it!
ValdikSS said:
Help me with unbricking my device please!
I used only upsl and i think i had spl under 4.00.0000
now my spl and ipl 1.09.0001 and ppc load only in bootloader
romupdater says error [300] and flash via SD card not working...
please help! i have only sunday to unbrick it!
Click to expand...
Click to collapse
I said a lot in my ****ing post to tell you guys how to aviod bricking.
nobody read it.dawn.
I know, i know...
sorry(
but how to repair it?
ValdikSS said:
I know, i know...
sorry(
but how to repair it?
Click to expand...
Click to collapse
I can't find a way.so I told people again and again.not to run them under 4.00.0000
i must go to service center?
ValdikSS said:
i must go to service center?
Click to expand...
Click to collapse
the best and the most quickly way
Does anybody know what flasher and box do they use?(in service center)
I want to use JAFWM but now it doesnt work for Herald
ValdikSS said:
Does anybody know what flasher and box do they use?(in service center)
I want to use JAFWM but now it doesnt work for Herald
Click to expand...
Click to collapse
Woo...
JAFWM... nice tool
try anything...
it doesnt work now with Herald
Can I use HardSPL's ruuwarpper to repair?
please answer quickly...
Now i know that we haven't service center in our city
it can be moved to another service in another town only next Monday...
Help, please!
No Way Out of Error 300
canonyang_China said:
Woo...
JAFWM... nice tool
try anything...
Click to expand...
Click to collapse
I got my P4350 last thursday, After a few hours used Hard Spl, then phone was dead.
After Hard Spl
IPL :1.08.001
SPL :1.08.001
On Saturday i took it to HTC service.
Today they told me they will change the phone for me.
What it seems is they could not fix the problem and also i suppose they couldn't tell the cause of it so they decided to change it for no charge.
shafez said:
I got my P4350 last thursday, After a few hours used Hard Spl, then phone was dead.
After Hard Spl
IPL :1.08.001
SPL :1.08.001
On Saturday i took it to HTC service.
Today they told me they will change the phone for me.
What it seems is they could not fix the problem and also i suppose they couldn't tell the cause of it so they decided to change it for no charge.
Click to expand...
Click to collapse
..
I have the same problem,
But in my Countery there is no service Center for HTC.
Anyone have solution to unbrick Herald Hard SPL,
After Hard Spl
IPL :1.08.001
SPL :1.08.001
waiting for solution.
Br.
it happened to me... exactly..
go to the service center, and i hope you haver warranty, because if you havent got.. it will be expensive:S
i will go today to service to get my herald, maybe it unbricked already)
No, you have to use an original ruu!!!!!!!!
Try them all, one must work!
no way oddball1...
Has anyone try to Flash using 128mb Micro SD as indicated in the Herald Service manual.
Just the same as the Hermes by renaming the RUU_Signed.nbh file to HERAIMG.NBH., Instruction are in the Attached file.
Regards
I tryed, it doesnt work, maybe only on dead uspl's herald.
P.S. My Herald still in service
Htc tp2 v sprint brick please eny help
plis help
i was unlocking my phone (the HTC Touch Pro 2 <sprint>) and I was using a Diamond unlocker , but during the process there was a connection error and now my phone seems to be bricked. I can't get it to even turn on, get to a bootloader screen, or anything even remotely close.
The one odd thing that it does though, is when I connect it to my computer, it pops up and my computer recognizes there is a device there. In my Device Manager there is an unknown device called: Qualcomm CDMA Technologies MSM. I have tried every combination of two buttons, including holding down the reset button with all of them, but nothing gets me anywhere.
If anyone could help, I would really appreciate it. there's eny way to save it???
I received HTC Herald P4350 to change Language from NOrweign to English.
I try to use HERALD-USPL-beta3. and Now phone is dead
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.exe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
Any one here can share me the solution to unbrick this phone.
Br.
canonyang rulez)))
hate this numbers 1.08.001, as in "lost" film
DONT USE *SPL* (uspl,hardspl,jspl,another) IF YOUR SPL UNDER 4.00.0000
DrMobile said:
I received HTC Herald P4350 to change Language from NOrweign to English.
I try to use HERALD-USPL-beta3. and Now phone is dead
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.exe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
Any one here can share me the solution to unbrick this phone.
Br.
Click to expand...
Click to collapse
Send your phone to HTC Service Center, Same thing happend to me and they
changed it under warranty.
In my country there is no service center for HTC.
and phone is come from norway
I need solution. otherwise customer will eat me.
Br.
A. Wahab
Hi DrMobile,
Have you solved your issue? I have the same issue as you...
Please help by sharing with us the solution
Thanks,
Lamnl
same in my mobile error 300
i am still trying the rom without any success. please help
i have the same problem. my phone is showing bootloader , i have ipl/spl 1.08.0001 i tried anythin but nothing worked.
i hope there is a solution with our phones, and someone around here will take a look to our problem.
stuck in bootloader
i have the same problem.
eror 300
pls help
me 2 plz any one can help me 2 plzzzzzzzzzzzzzzzzzzzzzzzz
"those with a SPL lower than 4.0.0.0 or something like that gets bricked. I just wanted to get this first post edited to reflect that so that people don't keep bricking their phones."
(Moderator: whether this is accurate or not I do not know - but use your own discretion)2nd Jan 2008
from another topic, send them for repair
Try this:
http://forum.xda-developers.com/showthread.php?t=343450&page=2
Warranty got back my device back to life
Hi I bricked my device a few days back and tried all the stuff to bring it back to lifee but in vain... I finally gave up my trials and approached the service centre. They just replaced the motherboard inside and luckily everything seems fine now. They hadn't charged me anything as it was within warranty. Anyone in India if you need service centre address..
http://www.asia.htc.com/asia/in/support_sc.html
Though this site says HTC, I got my Dopod C800 serviced there...
Very few questions and cool guys.
Regards,
Murali
Now I think that the reason of non flashing, even with official RUU, could be corrupted CID-block after using HardSPL on devices with low IPL/SPL. I've read thread about similar problem with Wizard. The question is: how to restore the CID block in our bricked devices? I'm not even sure if this theory with CID-block is a reason...
What do you think about such a trick:
- Run RUU on someone's working HTC device but only until the moment, when it wants you to click the last button to finally proceed with flashing. (This step is to let RUU to know that this RUU is correctly dedicated to our device). It's a kind of fake for RUU, cause our CID doesn't match the CID of ROM included in RUU.
- Next disconnect working device from the USB and connect your bricked device with launched bootloader mode
- Next click the final button to launch flashing in RUU application. If the process of CID matching was done before this step, the flasher should start and let us flash our bricked device. But I'm sceptic to this solution. If it was so trivial, everyone could flash his device with different ROMs so easy...
I can't try this trick cause I don't have working HTC. What do you think? Will it work or not?
DrMobile said:
I received HTC Herald P4350 to change Language from NOrweign to English.
I try to use HERALD-USPL-beta3. and Now phone is dead
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.exe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
Any one here can share me the solution to unbrick this phone.
Br.
Click to expand...
Click to collapse
D'you mean
working Herald or any HTC?
I have the same prob
I'm thinking about working device, exactly the same as this bricked one - in this case Herald. But all of this is only a theory. I don't have enough knowledge about the RUU flashing process.
My another idea is to swap only ROMUpdateUtility.exe, rapitool.exe and EnterBootloader.exe files from official RUU dedicated to your bricked device, with different versions of these files from another HTC devices just to test if it helps to recognize our bricked devices by RUU. Maybe the problem is wrong version of these files? But which versions are correct?
I'm just trying to find a solution to unbrick our f.....g Heralds . I know this is only a matter of time and soon or later we will know what to do. Moreover I believe that there are people, even on this forum, who know how to unbrick our Heralds but some of them don't want to do us a favour. I know what I'm talking about...
GenePr said:
D'you mean
working Herald or any HTC?
I have the same prob
Click to expand...
Click to collapse
i have the same problem.
error 300
pleas help
have the same error...300
but i can manage via mtty using bootloader commands
when i put password <Bs...> the mtty shows last thing ive running and phone shows a progress bar with 0% (like.. what uve been doing last time?)
i think we can manage it via bootloader commands
i know.. i know
(at least our devices run bootloader mode, is recoverable!)
it can be flashed by SD? how?
Welcome to the club...
As far as I know, SD flashing doesn't work because of the CID-lock.
tramuyo said:
have the same error...300
but i can manage via mtty using bootloader commands
when i put password <Bs...> the mtty shows last thing ive running and phone shows a progress bar with 0% (like.. what uve been doing last time?)
i think we can manage it via bootloader commands
i know.. i know
(at least our devices run bootloader mode, is recoverable!)
it can be flashed by SD? how?
Click to expand...
Click to collapse
no, it cant be possible! im not goin to pay HTC Herald
there's a solution, a HOPE... (u try to flash with original flashfile?)
I thinks the solution is to unlock CID from bootloader mode, for old models i did so, but how to unlock Herald's CID
i have SPV M3100 with
when enter boot HERM100
IPL-1.01
HERM100
SPL-2.03
when power M05
S04 NO gsm
B06 D3.60
after powered with splash imaging Orange phone hang on white screen
i tryed with some rom from forum failed error with INVALID VENDER ID or UPDATE error
(alway error at 1 or 7%)
i think my phone is locked SuperCID
anyone can help me???
thank in advance
Hard-SPL
mrphuc said:
i have SPV M3100 with
when enter boot HERM100
IPL-1.01
HERM100
SPL-2.03
when power M05
S04 NO gsm
B06 D3.60
after powered with splash imaging Orange phone hang on white screen
i tryed with some rom from forum failed error with INVALID VENDER ID or UPDATE error
(alway error at 1 or 7%)
i think my phone is locked SuperCID
anyone can help me???
thank in advance
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=296722
To try and recover - RE-INSTALL THE STOCK, CARRIER ROM. Then HARD SPL YOUR PHONE!!!!!
Your phone ISN'T supercid by default. Hard SPL is the best way of doing this. I can't guarantee you will fix this problem as there are a hell of a lot of others with this problem. Do a search with the words "SPL 2.03 brick flashing" and you'll see, might be able to help too.
Good Luck...
I Had Found Provider
This Is From Orange Romania
I Tryed With Spl Not Done
How To Find Original Rom From Orange Romania????
See if they have a website. It may be WM05 though. Thats OK because you can then install Hard SPl and reflash afterwards. If you can't find........
nothing found!!!!!!!!!!!!!
ultramag69 said:
See if they have a website. It may be WM05 though. Thats OK because you can then install Hard SPl and reflash afterwards. If you can't find........
Click to expand...
Click to collapse
nothing in they's site
what i must to do?????
Hi everybody,
I went to a store this evening in order to unlock my Polaris. The owner of the store has got a HTC herald with a problem that he wanted me to solve.
He tried to install another rom on his herald but, due to an unsuccessfull rom upgrading, the HTC is locked on a RGB screen (red green blue) with the only following indications:
RUU
IPL 1.08.0001
SPL 1.08.0001
USB (or nothing when not plugged)
Would you mind helping me? I tried several Roms, and there was only one that seemed to work (ROM HERALD_ smiley sWWE.gif _6.1.405.13_BUILD 20764.1.4.3): It gave me a progress bar on the HTC frozen at 0% while the upgrading tool on the pc told me that I needed a more recent upgrading tool.
What can I do?
Thanks for all the solutions you'll give me
Nounou7701
(sorry for my bad english, I'm only a 15 years old french guy, wich explains that way of speaking english)
Before installing cooked ROMs I believe the phone must be HardSPL'ed, and this can only be done if the SPL/IPL is 4 or above - any lower/not HardSPL'ed and the device will be bricked. The screen you are describing is the bootloader, and since you only have an IPL/SPL of 1.x I'm pretty sure you can't install custom ROMs. To unbrick the device, turn it onto the bootloader and then load the original HTC ROM that came with the device.
Hope this helps,
czhang
Dear Czhang,
I tried several times to enter in bootloader, but it's impossible as it starts with the bootloader menu! I can't change anything about that, even by soft resets, reset+camera, reset+buttons...
Do ya think this could work properly? http://forum.xda-developers.com/showthread.php?t=417930
As I am stucked with 1.08.0001 SPL, There is nothing to do. All the users who tried to unbrick their phone didn't got it working, except one who changed the motherboard for... 200$ ! The price of a used HTC Herald in very good conditions!
Still looking for help
Thanks
Nounou7701
sorry to say sir but your ipl and spl should have been 4.0 or higher and also HardSPL'ed. i'm pretty sure your device is bricked. GL on finding a way to fix it or buying a new one. =D
Nounou7701, though you cannot flash a cooked ROM with IPL/SPL 1.x you can definitely flash the official ROM from HTC.
AAAARRRGGHHH! thanks to everyone for the (bad ) news... I'll try to buy a mothercard, just like another user did...
Have a nice evening
Nounou7701
nounou7701 said:
Hi everybody,
I went to a store this evening in order to unlock my Polaris. The owner of the store has got a HTC herald with a problem that he wanted me to solve.
He tried to install another rom on his herald but, due to an unsuccessfull rom upgrading, the HTC is locked on a RGB screen (red green blue) with the only following indications:
RUU
IPL 1.08.0001
SPL 1.08.0001
USB (or nothing when not plugged)
Would you mind helping me? I tried several Roms, and there was only one that seemed to work (ROM HERALD_ smiley sWWE.gif _6.1.405.13_BUILD 20764.1.4.3): It gave me a progress bar on the HTC frozen at 0% while the upgrading tool on the pc told me that I needed a more recent upgrading tool.
What can I do?
Thanks for all the solutions you'll give me
Nounou7701
(sorry for my bad english, I'm only a 15 years old french guy, wich explains that way of speaking english)
Click to expand...
Click to collapse
He didn't head the warning of the SPL requirements. You can easily revive it using the GoldCard method. (Search for the term "goldcard herald".)
HTC P4350 do not switch on after a bad SPL
I've tried to flash my Hera 100 P4350 with HardSPL Herald, but I got an error message it has switched off and I can't get my mobile switched on again.
It looks like completly dead (kaput).
Can anyone help me ? Or explain why that happened ?
TIA,
dark_side61
HTC P4350 do not switch on after a bad SPL
After a total reset (left soft touch + right soft touch + reset) I got the
IPL 1.08.0001
SPL 1.08.0001 screen but with no USB on the lower left corner of the screen
After arrived here what shoul I do to reinstall my P4350 ?
What do I need to have ?
TIA
dark_side
Do what Ivan said!
Search for Goldcard to fix it....
I have HTC ELF 0300 that freezes on the T-mobile logo when i try to power on!!!
I tried with hard reset,but that not helped.
I can't make ActiveSync connection with my PC!
I try with connecting the phone in bootloader mode,but still can't make ActiveSync comunication!
Any advice???
Did you manage to see a screen that says 'smart mobility'
jeremy89632 said:
Did you manage to see a screen that says 'smart mobility'
Click to expand...
Click to collapse
No! It just goes to operator logo and blocks on it!
When you are in bootloader mode.
Does windows xp or vista detect that?
Activesync ONLY LOADS in normal mode, not bootloader.
jeremy89632 said:
When you are in bootloader mode.
Does windows xp or vista detect that?
Activesync ONLY LOADS in normal mode, not bootloader.
Click to expand...
Click to collapse
No,windows doesn't detect the phone in bootloader mode!
Weird.
My vista pc will.
But have to install Windows Mobile Device Centre first.
When I connect in bootloader mode I tried with many Rom updaters but every time I get this message 'The update utility can not be used with your PDA Phone.Please get newer update utility'
I tried with update utility 3.27.4.3 an lower versions.
Is there newer version?
What is your phone's IPL and SPL?
Before you start your phone, press the power and camera key together, it will boot up a multi colour-ed screen and it will report the IPL and SPL to you there
jeremy89632 said:
What is your phone's IPL and SPL?
Before you start your phone, press the power and camera key together, it will boot up a multi colour-ed screen and it will report the IPL and SPL to you there
Click to expand...
Click to collapse
IPL 1.13.0002
SPL 1.13.0000
any idea what to try next???
thanx for your help bro anyway!
Can you sync your htc to other pc's?
Reinstall activesync.
and your ipl and spl is way too old.
During the meantime, read the other threads.
Will be going to camp in 14 hrs time and its almost 1am here.
So yeah.
I've tried to sunc with other PC's too,but the same result! when i start some Rom Update Utility it gives me that I should try with newer version.
well, if that can detect the newer version!
Bingo!
you computer can read it.
Alright, update your IPL and SPL to 3.10.
and its avail at htc upgrading forum.
HTC ELF 0300 Error
Hello somebody could help the other day I came across a ELF0300 phone and also the problem that would crash the machine operator in the Logo.
inquired the previous administrator of the system can not be installed on it.
handheld device is excellent by the way the externally,and we need to somehow fix
Bootloader mode writes
IPL 2.26.0002
SPL 2.26.0000
but quite interesting if you install this dream running 100% and then upgrade error
Activesync does not do anything
Thanks in advance for the help