I received HTC Herald P4350 to change Language from NOrweign to English.
I try to use HERALD-USPL-beta3. and Now phone is dead
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.exe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
Any one here can share me the solution to unbrick this phone.
Br.
canonyang rulez)))
hate this numbers 1.08.001, as in "lost" film
DONT USE *SPL* (uspl,hardspl,jspl,another) IF YOUR SPL UNDER 4.00.0000
DrMobile said:
I received HTC Herald P4350 to change Language from NOrweign to English.
I try to use HERALD-USPL-beta3. and Now phone is dead
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.exe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
Any one here can share me the solution to unbrick this phone.
Br.
Click to expand...
Click to collapse
Send your phone to HTC Service Center, Same thing happend to me and they
changed it under warranty.
In my country there is no service center for HTC.
and phone is come from norway
I need solution. otherwise customer will eat me.
Br.
A. Wahab
Hi DrMobile,
Have you solved your issue? I have the same issue as you...
Please help by sharing with us the solution
Thanks,
Lamnl
same in my mobile error 300
i am still trying the rom without any success. please help
i have the same problem. my phone is showing bootloader , i have ipl/spl 1.08.0001 i tried anythin but nothing worked.
i hope there is a solution with our phones, and someone around here will take a look to our problem.
stuck in bootloader
i have the same problem.
eror 300
pls help
me 2 plz any one can help me 2 plzzzzzzzzzzzzzzzzzzzzzzzz
"those with a SPL lower than 4.0.0.0 or something like that gets bricked. I just wanted to get this first post edited to reflect that so that people don't keep bricking their phones."
(Moderator: whether this is accurate or not I do not know - but use your own discretion)2nd Jan 2008
from another topic, send them for repair
Try this:
http://forum.xda-developers.com/showthread.php?t=343450&page=2
Warranty got back my device back to life
Hi I bricked my device a few days back and tried all the stuff to bring it back to lifee but in vain... I finally gave up my trials and approached the service centre. They just replaced the motherboard inside and luckily everything seems fine now. They hadn't charged me anything as it was within warranty. Anyone in India if you need service centre address..
http://www.asia.htc.com/asia/in/support_sc.html
Though this site says HTC, I got my Dopod C800 serviced there...
Very few questions and cool guys.
Regards,
Murali
Now I think that the reason of non flashing, even with official RUU, could be corrupted CID-block after using HardSPL on devices with low IPL/SPL. I've read thread about similar problem with Wizard. The question is: how to restore the CID block in our bricked devices? I'm not even sure if this theory with CID-block is a reason...
What do you think about such a trick:
- Run RUU on someone's working HTC device but only until the moment, when it wants you to click the last button to finally proceed with flashing. (This step is to let RUU to know that this RUU is correctly dedicated to our device). It's a kind of fake for RUU, cause our CID doesn't match the CID of ROM included in RUU.
- Next disconnect working device from the USB and connect your bricked device with launched bootloader mode
- Next click the final button to launch flashing in RUU application. If the process of CID matching was done before this step, the flasher should start and let us flash our bricked device. But I'm sceptic to this solution. If it was so trivial, everyone could flash his device with different ROMs so easy...
I can't try this trick cause I don't have working HTC. What do you think? Will it work or not?
DrMobile said:
I received HTC Herald P4350 to change Language from NOrweign to English.
I try to use HERALD-USPL-beta3. and Now phone is dead
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.exe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
Any one here can share me the solution to unbrick this phone.
Br.
Click to expand...
Click to collapse
D'you mean
working Herald or any HTC?
I have the same prob
I'm thinking about working device, exactly the same as this bricked one - in this case Herald. But all of this is only a theory. I don't have enough knowledge about the RUU flashing process.
My another idea is to swap only ROMUpdateUtility.exe, rapitool.exe and EnterBootloader.exe files from official RUU dedicated to your bricked device, with different versions of these files from another HTC devices just to test if it helps to recognize our bricked devices by RUU. Maybe the problem is wrong version of these files? But which versions are correct?
I'm just trying to find a solution to unbrick our f.....g Heralds . I know this is only a matter of time and soon or later we will know what to do. Moreover I believe that there are people, even on this forum, who know how to unbrick our Heralds but some of them don't want to do us a favour. I know what I'm talking about...
GenePr said:
D'you mean
working Herald or any HTC?
I have the same prob
Click to expand...
Click to collapse
i have the same problem.
error 300
pleas help
have the same error...300
but i can manage via mtty using bootloader commands
when i put password <Bs...> the mtty shows last thing ive running and phone shows a progress bar with 0% (like.. what uve been doing last time?)
i think we can manage it via bootloader commands
i know.. i know
(at least our devices run bootloader mode, is recoverable!)
it can be flashed by SD? how?
Welcome to the club...
As far as I know, SD flashing doesn't work because of the CID-lock.
tramuyo said:
have the same error...300
but i can manage via mtty using bootloader commands
when i put password <Bs...> the mtty shows last thing ive running and phone shows a progress bar with 0% (like.. what uve been doing last time?)
i think we can manage it via bootloader commands
i know.. i know
(at least our devices run bootloader mode, is recoverable!)
it can be flashed by SD? how?
Click to expand...
Click to collapse
no, it cant be possible! im not goin to pay HTC Herald
there's a solution, a HOPE... (u try to flash with original flashfile?)
I thinks the solution is to unlock CID from bootloader mode, for old models i did so, but how to unlock Herald's CID
Related
Latest update: http://forum.xda-developers.com/viewtopic.php?p=363228#363228
Let me first say: I am unsure if my SIM is now unlocked and if it has a CID check. Therefore I'm unsure if the info in the related topic http://forum.xda-developers.com/viewtopic.php?t=62496 applies. Therefore I'm posting this new topic.
I recently got a Orange SPV M600 which as far as I understand is a HTC Prophet. I am totally new to PDAs but wanting to use it with my T-Mobile sim and with a fair amount of computer knowledge on board decided to unlock it myself using imei-check.co.uk/m600unlock.php
I ran the program and it said the sim was succesfully unlocked. However when I tried to power on the device after that, it was stuck at the 3 color screen only displaying the values:
IPL 2.10.0001
SPL 2.10.0001
This gave me quite a scare because the device is brand new. Soft and hard reboot bring me back to the same screen. This morning I tried running the tool again and the unlocked failed giving me a message that key / imei do not match. After rebooting it now also shows the value RUU at the upper right corner of the screen.
I read some of the posts on this forum and did a little research on Google. I think I know what my next steps should be but I'm terrified to toast my M600.. I already fell in love with it! Could you guys give me feedback before I try the following?
* Download and unzip:
xda:[email protected]/Prophet/Shipped_Complete_Updates/RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
* Follow the steps on http://wiki.xda-developers.com/inde...tion On How To Upgrade with Bootloader method
Should that work?
PS: what does the RUU value mean and why did it appear after my 2nd try?
Thanks in advance guys!
Have you tried contacting IMEI-check's support?
RUU is. IIRC, radio unit upgrade and it should not have appeared.
Don't flash the rom, you might need to send it back to orange / HTC and there is no official orange downloadable rom as yet so if the device boots to 'dopod' or whatever they'll know you've messed with it. If the key does not match sounds like the unlocking has screwed your imei. Does the IMEI the app now recognises match the one you paid for the unlock for or the one on the back of the unit/ box?
Richard
IMEI-check support:
The unlock has nothing to do with your device problem. You say yourself that it already turned on directly to 3 color screen after you switched it off (sometimes this happens due to problems in HTC flash driver). For a firmware flash you don't need Orange. You can do this on your computer at home.
Both the soft and the hard reset bring me back to the same 3 color screen..
MeneerPaul said:
IMEI-check support:
The unlock has nothing to do with your device problem. You say yourself that it already turned on directly to 3 color screen after you switched it off (sometimes this happens due to problems in HTC flash driver). For a firmware flash you don't need Orange. You can do this on your computer at home.
Both the soft and the hard reset bring me back to the same 3 color screen..
Click to expand...
Click to collapse
Typically helpful....
I do not think it co-incidence that you are doing a flash operation ( unlocking) and now the device will not boot. It should reboot after unlocking according to their documentation and if it went to the tri-colour screen something was amiss after the unlocking then, quite possibly becuase of it. The unlock completed succesfully the first time then?
Don't flash the dopod rom, if the IMEI now has a mis-match you may need to send it back to orange for repair / reflashing. They will be able to tell if there is a dopod rom on there and may refuse warranty - I wouldn't mention the unlocking if I were you. There is no official orange rom you can try :-(
Richard
I do not have a receipt for the phone.. is the ROM at least the one I should try if I do try one?
MeneerPaul said:
I do not have a receipt for the phone.. is the ROM at least the one I should try if I do try one?
Click to expand...
Click to collapse
In the UK at least you do not need a receipt for the phone - it is based on seriel number.
http://service.htceurope.com/
Once you have tried flashing the other roms they can tell you have been flashing it and may not give warranty service, but hopefully all it really needs is a rom anyway. My warning is just in case it is not the rom that is the issue and you need to send it back.
When you run imei-check's app now what IMEI does it give for the device?
Richard
Good question, I just checked and the IMEI in their tool gives me the same one as I wrote down before the operation. It is the same as on the box and as the one I payed for to get the key for and used the first time around.
I hoped the flash would solve my problems and I tried flashing the M600 with the ROM mentioned above. 100% completed and all looked good until the reboot.. Again it will not go further then the tri-color screen with the exception that the SPL version has changed:
IPL 2.10.0001
SPL 2.15.0001
Anything left to try?
MeneerPaul said:
I hoped the flash would solve my problems and I tried flashing the M600 with the ROM mentioned above. 100% completed and all looked good until the reboot.. Again it will not go further then the tri-color screen with the exception that the SPL version has changed:
IPL 2.10.0001
SPL 2.15.0001
Anything left to try?
Click to expand...
Click to collapse
Get back to IMEI-check and ask for more help? They may claim that the unit was faulty before unlocking but if so how could the unlocker run? Or try posting at www.modaco.com to see if anyone there has any ideas.
Which country was the device supplied in? Did you check the seriel in the link I gave? If it's from the UK you could send to a friend or collegue to return under warranty without paperwork ;-)
Sorry.
Richard
Well at least we made progress, a hard reset now let's the device boot but.. after I went through the settings I pressed start and it automaticly powered off.
I then inserted my T-Mobile simcard and rebooted again to find myself in the tri-color screen. Another hard reset once again let me reboot but during the boot of Windows Windows it says 'Data crashes. Please contact your service center.'
Where in the Netherlands do you live?
I have succesfully dopotted two M600 phones and I have had one repaired by Orange, for broken speaker. They did not seem to care that I flashed it to dopod.
I might be able to help you out on this one.
send me an e-mail on [email protected]
Thanks,
Robin
O, and I unlocked both also....
hi
i have got a same situation as mentioned in the first post, i recieved an spv m600 today
some body has tried to unlock it and now the phone is stuck 3 colour screen
so is there any solution for it yet?
thanks in advance
br
chowdary said:
hi
i have got a same situation as mentioned in the first post, i recieved an spv m600 today
some body has tried to unlock it and now the phone is stuck 3 colour screen
so is there any solution for it yet?
thanks in advance
br
Click to expand...
Click to collapse
How did they try to unlock it?
Richard
hi
i couldn't speak to the guy who tried to unlock it, i spoke to his collegue and all he could say is that he tried to unlock by logs
now he couldn't tell me what did he use
i have tried to hard reset it but it comes back on that screen
:? :? :?
Try to load the no id DOPOD ROM.
This one will install when the M600 is in that 3 colour screen.
I did it and it worked for me.
I tried to CID unlock with a tool that contained a specific WARNING NOT TO USE for a certain ROM version, which of course I did anyway.
The warning was correct. My M600 was stuck.
By reflashing I resolved the problem.
You can always bring it back to Orange and claim that this happened after you've let the battery go dead; you did not get a chance to charge on your 1,5 month holiday ..........
Good luck!
robincop deel 2 said:
Try to load the no id DOPOD ROM.
This one will install when the M600 is in that 3 colour screen.
I did it and it worked for me.
I tried to CID unlock with a tool that contained a specific WARNING NOT TO USE for a certain ROM version, which of course I did anyway.
The warning was correct. My M600 was stuck.
By reflashing I resolved the problem.
You can always bring it back to Orange and claim that this happened after you've let the battery go dead; you did not get a chance to charge on your 1,5 month holiday ..........
Good luck!
Click to expand...
Click to collapse
thanks for your reply
it will be very helpfull if u could give us the link to download this file
as i am new with pdas
thanks
Read the prophet forum. You will find the link there in a few seconds.
Success
after doing search this is what i found
RUU_Prophet_2151327_22113102_022021_Dopod_PDAMobizEdition_v101
please could u tell me if that is ok to flash
the other thing is i can't connect to the pc
active sync is not picking up
phone is stuck in three colour screen
and all i can c is
IPL 2.10.0001
SPL 2.10.0001
any idea for that
THANKS
you should load:
RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID
i have tried to downgrade with various roms but no success..every time i try,the IPL changes
but the SPL always remains the same...SPL:1.06 and i end up still stuck at the splash screen.. i have tried sd backup but no success,something about me not having "the proper security level to do so",and lokiwiz cannot communicate with pda in bootloader mode to try cid unlock ,and i have tried master reset without any success..tells me format failed...so please i really need help to revive my xda,any help will be greatly appreciated..thanx
btw it is a wiza200.
abuholm said:
i have tried to downgrade with various roms but no success..every time i try,the IPL changes
but the SPL always remains the same...SPL:1.06 and i end up still stuck at the splash screen.. i have tried sd backup but no success,something about me not having "the proper security level to do so",and lokiwiz cannot communicate with pda in bootloader mode to try cid unlock ,and i have tried master reset without any success..tells me format failed...so please i really need help to revive my xda,any help will be greatly appreciated..thanx
btw it is a wiza200.
Click to expand...
Click to collapse
im assuming u have tried a hardreset as well? have u tried installing Buttons 1.5 ROM at bootloader?
Malik05 said:
im assuming u have tried a hardreset as well? have u tried installing Buttons 1.5 ROM at bootloader?
Click to expand...
Click to collapse
..Yes i have tried a hard reset still no success...could you please explain to me what "installing Buttons 1.5 ROM at bootloader" mean? i am a noobie in these things really..
sure...first tell me if u have a G3 or G4 Wizard...and is it CID unlocked? you must be CID unlocked to perform any custom ROM modifications...
Malik05 said:
sure...first tell me if u have a G3 or G4 Wizard...and is it CID unlocked? you must be CID unlocked to perform any custom ROM modifications...
Click to expand...
Click to collapse
It must be a G3 Wizard (not really sure)because it came in as a XDA MINI S from O2 and at the splash screen it has this info: IPL:1.05 SPL:1.06 GSM: 01.01.10 OS:1.1.9.3 after flashing with Xda_minis_LaunchRom_v154102_2. i am not sure about CID unlock but i am using a different network other than O2. it was shipped with windows mobile 5.0...
a G4 PDA will report an IPL and SPL similar to 2.21.0001 and a G3 PDA will report something similar to 2.21 (notice the G3 doesn't have the trailing .0001!)
http://forum.xda-developers.com/showthread.php?t=285435
go to the above link and CID unlock your device just to be on the safe side...as for going into the bootloader, u can do this by keeping the Camera button pressed, and pressing the softreset button..then u will go into a colored screen(red,green,blue,white)which will show your IPL/SPL...once u are in that screen, go ahead and connect it to your computer(via USB) and u will notice on ur device, it will show USB on the bottom...then u can proceed with the guide to CID unlock your phone...let me know how it goes!! =)
Hi i installed the buttons rom like you suggested but it still hangs at the splash screen(beer jug)with this info IPL:1.01 SPL:1.06 GSM:01.12.10 OS:1.5.4.2. activesync does not recognize the pda in "hang mode" for me to be able to try CID unlocking...so where do i go from here ? please help...
oo wow...umm gosh im out all of ideas...i dont know what else to suggest, ive never heard of this type of problem....sorry!
Malik05 said:
oo wow...umm gosh im out all of ideas...i dont know what else to suggest, ive never heard of this type of problem....sorry!
Click to expand...
Click to collapse
So does it mean my fon is bricked or what? or could it be a hardware problem?
ummm i dont think its bricked, if it was, you wouldnt be able to get into the bootloader...im sure theres a solution to the problem, i just dont know it because ive never seen this type of case before, im fairly new to the MDA...i started modifying my wizard less than 2-3 months ago
Malik05 said:
ummm i dont think its bricked, if it was, you wouldnt be able to get into the bootloader...im sure theres a solution to the problem, i just dont know it because ive never seen this type of case before, im fairly new to the MDA...i started modifying my wizard less than 2-3 months ago
Click to expand...
Click to collapse
..Well thanx for all the help,i will let you know if anything comes up..
Help me with unbricking my device please!
I used only upsl and i think i had spl under 4.00.0000
now my spl and ipl 1.09.0001 and ppc load only in bootloader
romupdater says error [300] and flash via SD card not working...
please help! i have only sunday to unbrick it!
ValdikSS said:
Help me with unbricking my device please!
I used only upsl and i think i had spl under 4.00.0000
now my spl and ipl 1.09.0001 and ppc load only in bootloader
romupdater says error [300] and flash via SD card not working...
please help! i have only sunday to unbrick it!
Click to expand...
Click to collapse
I said a lot in my ****ing post to tell you guys how to aviod bricking.
nobody read it.dawn.
I know, i know...
sorry(
but how to repair it?
ValdikSS said:
I know, i know...
sorry(
but how to repair it?
Click to expand...
Click to collapse
I can't find a way.so I told people again and again.not to run them under 4.00.0000
i must go to service center?
ValdikSS said:
i must go to service center?
Click to expand...
Click to collapse
the best and the most quickly way
Does anybody know what flasher and box do they use?(in service center)
I want to use JAFWM but now it doesnt work for Herald
ValdikSS said:
Does anybody know what flasher and box do they use?(in service center)
I want to use JAFWM but now it doesnt work for Herald
Click to expand...
Click to collapse
Woo...
JAFWM... nice tool
try anything...
it doesnt work now with Herald
Can I use HardSPL's ruuwarpper to repair?
please answer quickly...
Now i know that we haven't service center in our city
it can be moved to another service in another town only next Monday...
Help, please!
No Way Out of Error 300
canonyang_China said:
Woo...
JAFWM... nice tool
try anything...
Click to expand...
Click to collapse
I got my P4350 last thursday, After a few hours used Hard Spl, then phone was dead.
After Hard Spl
IPL :1.08.001
SPL :1.08.001
On Saturday i took it to HTC service.
Today they told me they will change the phone for me.
What it seems is they could not fix the problem and also i suppose they couldn't tell the cause of it so they decided to change it for no charge.
shafez said:
I got my P4350 last thursday, After a few hours used Hard Spl, then phone was dead.
After Hard Spl
IPL :1.08.001
SPL :1.08.001
On Saturday i took it to HTC service.
Today they told me they will change the phone for me.
What it seems is they could not fix the problem and also i suppose they couldn't tell the cause of it so they decided to change it for no charge.
Click to expand...
Click to collapse
..
I have the same problem,
But in my Countery there is no service Center for HTC.
Anyone have solution to unbrick Herald Hard SPL,
After Hard Spl
IPL :1.08.001
SPL :1.08.001
waiting for solution.
Br.
it happened to me... exactly..
go to the service center, and i hope you haver warranty, because if you havent got.. it will be expensive:S
i will go today to service to get my herald, maybe it unbricked already)
No, you have to use an original ruu!!!!!!!!
Try them all, one must work!
no way oddball1...
Has anyone try to Flash using 128mb Micro SD as indicated in the Herald Service manual.
Just the same as the Hermes by renaming the RUU_Signed.nbh file to HERAIMG.NBH., Instruction are in the Attached file.
Regards
I tryed, it doesnt work, maybe only on dead uspl's herald.
P.S. My Herald still in service
Htc tp2 v sprint brick please eny help
plis help
i was unlocking my phone (the HTC Touch Pro 2 <sprint>) and I was using a Diamond unlocker , but during the process there was a connection error and now my phone seems to be bricked. I can't get it to even turn on, get to a bootloader screen, or anything even remotely close.
The one odd thing that it does though, is when I connect it to my computer, it pops up and my computer recognizes there is a device there. In my Device Manager there is an unknown device called: Qualcomm CDMA Technologies MSM. I have tried every combination of two buttons, including holding down the reset button with all of them, but nothing gets me anywhere.
If anyone could help, I would really appreciate it. there's eny way to save it???
hey...
i hope you guys can help me out.
my problem is ,that i bought an herold witch is stuck in the bootloader !
the need little stripes won´t dissapear by any type of reset.
there a so many threads that stroke that a bit... but none only for that specific propblem...
i don´t know by witch method the thing was flashed so i can´t help you there.
i hope
and yes i tried the search
so thanx in advance
You could always try flashing the original ROM. They can all be found here:
http://rapidshare.com/users/5EWZ4
If that doesn´t work it would be helpful to know the SPL version, I can´t tell by the picture the numbers are too small.
OH my god !!
Thx a lot ! for tha fast answer....
but i can try it in a few days....
will post the result then
thx
from looking at the picture you included, I can see your IPL is v1.xx
There have been many people who have permanently bricked their phones by trying to hardspl and uspl ... so make sure you do some research before attempting to do those..
If it goes to bootloader automatically, and it has an SPL of 1.x, it's probably already permanently bricked. Your only option is to bring it to a repair center. Sorry.
i will be back next week on tuesday i think ... then i can look witch spl i have.
hey. and thx for your help already
i am pleased for every hint you have for me !!
could that be a solution for me too ??? ----> http://forum.xda-developers.com/showthread.php?p=1911779
ok...
my SPL is 1.08.0001
IPL the same
i am now trying to reflash the original firmware... lets see...
hm...
invalid flashingtool.... error 300 ????
it says i need a newer flashingtool...... WHAT !!??!?!
i now figured out that it is an italien device.. but the italien firmware also didn´t work...
do anyone has an idea ??? PLEASE....
Like I said, if it's stuck at bootloader and has that SPL, it's probably permanently bricked. Either the Radio or SPL or IPL was accidently overwritten. I was researching and found something that maybe be useful if it's the radio being overwriten but don't have the knowhow to port it to the Herald... yet.
hm...
i just tryed : 1. Kill ActiveSync process - wcescom.exe on your computer.
2. Attach USB-cable to device.
3. Run programm from attach, select "\\.\WCEUSBSH001" from
port's list and click Ok.
4. Type (type himself, not copy/paste) in window:
password BsaD5SeoA(press Enter)
ruurun 0(press Enter)
ResetDevice(press Enter)
and after a hardreset..... the screen went green....so... Step forward or did i now find the perfekt brick procedure
what means a greenscreen ?? btw
so now back in rainbow-mode
is there a way to CID unlock the thing with PUTTY
short before it enters bootmode it displays "searching for sd-card"
flashing from SD-Card ??? possible ???
If anyone find a time to help me , about HTC artemis is only stuck on windows mobile screen/logo
..also phone was entering on bootloader mode , three color screen ?
3.15.0000 version T-mobile , but cant fllashing , cant uspl nothing only going to 3% and stopping there.
Any help on this please?
best.r
Hellooooo...
Masters , how to solve this problem , pleasee???????
Radio ROM curropted,
First of all
Try restoring factory settings.
1) PUSH AND HOLD the (-) and (-) buttons over the (ok) and (windows) buttons, then press and hold RESET button.
2) Release reset button. but keep (-) and (-) held.
3) A message will appear and tells you to press SEND to restore factory defaults, SEND = GREEN TEL BUTTON.
4) Press it and wait, see what will happen after, maybe once it's finished you will need a soft reset, I don't remember...
Second Try possibility -if the above will not work-
Try with flashing a new full official ROM
it might be a problem as probably you do not have USPL unlocked!
so your SPL should still be looked to 3,13 or similar.
it would give you a DEVICE ERROR if you update it, and stop at 3%.
if SPL is 1.11 so that's fine, SPL is unlocked.
just enter bootloader and flash any complete (OS + RADIO) Rom, even non factory rom.
if SPL is locked you can save your tel just trying to update and original factory rom.
example: T-Mobile UK, T-Mobile Germany, T-Mobile ....
Note that even if they are all T-Mobile they are different! (Germany is different than UK, and so...)
Desperate last choise
If all the above did not solve,
probably your Radio ROM is curropted and in a bad sector,
use MTTY tool and comands to do a low level format, and remove any residual rom tack.
Do not clean bootloader, you will need it for the new re-flash
Then enter bootloader and flash an official factory rom.
It took me 6,30 hours to save my last Artemis, wish you a quicker solution, so good luck!
mouse.co.nr , thanks for reply mate.
First i have try since from yesterday to give on the phone any fllash , i have try so much diference way to get solution but nothing happen.
The phone cant do a hard reset by presing buttons , the phone was only get on bootloader mode , and was show IPL 3.15.0001 , and SPL 3.15.0000 , and i know that the phone was not cid unlock maybe , but i cant give any upsl and fllashing with fllash that phone.
Second i we try with ART_TMOUK_11311001_024990_WWE_Ship_R3 t=mobile UK , nothing happen , also only radio ARTEIMG_TMO_UK_4.1.13.251_02.92.90_RadioOnly , again nothing.
Radio only , and fllash was going to 3% and stopping.
Artemis_USPL , starting and was going to 100% , but cant finalize i think , bcs ERROR [270]:UPDATE ERROR The image file is corrupted.Please check your update Utility.
..and also i have try to fllash from sd card http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing , i have create one folder with name : root , and i'we put the image ARTEIMG.nbh....but can not starting from sd card also.
i'we download from here all this: http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades , and also from official t-mobile.
what of this list is a good RUU for my HTC?
Best.r
root folder
haveri said:
..and also i have try to fllash from sd card , i have create one folder with name : root , and i'we put the image ARTEIMG.nbh....but can not starting from sd card also.
Best.r
Click to expand...
Click to collapse
...probably a problem is creating a folder with the name root, "root folder" means on your sd-card without any folders... as far as i know...
anyway, good luck trying
haveri said:
the phone was only get on bootloader mode , and was show IPL 3.15.0001 , and SPL 3.15.0000
Click to expand...
Click to collapse
SPL still Locked!
two solutions:
1) USPL (proper one) lately I foundout the official one on the official form was giving me some update errors, I think the file is curropted, and if startuspl.exe does not run till 100%, reboot and start the RUU by itself, it wouldn't work if you maually start the RUU once the original launched after USPL gaves the error.
I'm attaching another USPL try this other one...
2) if your pc does not see the PPC for USPL, try not other WWE roms, it should be for your ARTEXXXX, ther is ARTE100, ARTE110, ARTE1000, ARTE200 ...
try more than one till you'll get the 100% rom update.
Radio Only will not work, you are in bootloader, you have an OS problem! if it gives you the "windows mobile image" and stops there, so it's just the radio, else it's the OS and probably the radio!
do a full ROM updt, official WWE have both radio and OS.
I wish for you that your PPC doesn't stop at Windows Mobile Image (the one after boot image), I have thrown away a P3600 in this way!!! Radio was so curropted that I could not fix it anyway, nither MTTY, required a CIP programming, but I'm not good at...
haveri said:
Artemis_USPL , starting and was going to 100% , but cant finalize i think , bcs ERROR [270]:UPDATE ERROR The image file is corrupted.Please check your update Utility.
Click to expand...
Click to collapse
It surprised me the first time I got a 270, try the attached uspl, I got that from the rapidshare, scanned with norton 2010 and is clean, tested today on a german T-Mobile ARTE100 and it worked (now it speaks french!).
haveri said:
..and also i have try to fllash from sd card
Click to expand...
Click to collapse
Will not work, you can not bypass protections just by running SD bootmode!
if it's locked it's always locked!
haveri said:
i'we download from here all this: http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades , and also from official t-mobile.
what of this list is a good RUU for my HTC?
Best.r
Click to expand...
Click to collapse
I have no idea, try one of each, in the worst of cases it will always block at 3% and bring you back to beginning, Bootloader mode back again and re-flash..
hope it'll help!
good luck
haveri said:
the phone was only get on bootloader mode , and was show IPL 3.15.0001 , and SPL 3.15.0000
Click to expand...
Click to collapse
SPL still Locked!
two solutions:
1) USPL (proper one) lately I foundout the official one on the official form was giving me some update errors, I think the file is curropted, and if startuspl.exe does not run till 100%, reboot and start the RUU by itself, it wouldn't work if you maually start the RUU once the original launched after USPL gaves the error.
I'm attaching another USPL try this other one...
2) if your pc does not see the PPC for USPL, try not other WWE roms, it should be for your ARTEXXXX, ther is ARTE100, ARTE110, ARTE1000, ARTE200 ...
try more than one till you'll get the 100% rom update.
Radio Only will not work, you are in bootloader, you have an OS problem!
do a full ROM updt, official WWE have both radio and OS.
haveri said:
Artemis_USPL , starting and was going to 100% , but cant finalize i think , bcs ERROR [270]:UPDATE ERROR The image file is corrupted.Please check your update Utility.
Click to expand...
Click to collapse
try the attached uspl, I got that from the rapidshare, tested with norton 2010 and is clean, tested today on a german T-Mobile ARTE100 and it worked.
haveri said:
..and also i have try to fllash from sd card
Click to expand...
Click to collapse
Will not work, you can not bypass protections just by running SD bootmode!
if it's locked it's always locked!
haveri said:
i'we download from here all this: http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades , and also from official t-mobile.
what of this list is a good RUU for my HTC?
Best.r
Click to expand...
Click to collapse
I have no idea, try one of each, in the worst of cases it will always block at 3% and bring you back to beginning, Bootloader mode back again and re-flash..
hope it'll help!
good luck
no bootloader possible
hi,
I have tried everything on my T-Mobiel MDA Vario 3.
SSPL-KAIS.exe
JumpSPL 156, 193 and 194
pressing of any keys will not forward me into the bootloader
on my pda is IPL and SPL 3.15
I have also tried HardSPL 329 and 356, no success.
the only way to get into the bootloader is when starting KaiserCustomerRUU.exe, but no ROM is getting installed. I always receive an error 270 file defect. but this is not correct, as I have tested 3 or 4 different files.
does anybody have an idea?
thanks a lot
hds09 said:
hi,
I have tried everything on my T-Mobiel MDA Vario 3.
SSPL-KAIS.exe
JumpSPL 156, 193 and 194
pressing of any keys will not forward me into the bootloader
on my pda is IPL and SPL 3.15
I have also tried HardSPL 329 and 356, no success.
the only way to get into the bootloader is when starting KaiserCustomerRUU.exe, but no ROM is getting installed. I always receive an error 270 file defect. but this is not correct, as I have tested 3 or 4 different files.
does anybody have an idea?
thanks a lot
Click to expand...
Click to collapse
Hi!
Check hardware buttons,maybe one of them is broken,that's why you can't put your device in bootloader.
Make a Goldcard (search) and flash the Kaiser with Goldcard inside.It will revive your device.
BR
Scootie